B7 Audi A4 Cam Follower and HPFP Replacement 2.0T FSI 2005-2008

Рет қаралды 33,530

4 жыл бұрын

How to replace the cam follower on a B7 Audi A4 Quattro. I will also completely remove the high pressure fuel pump during the process. B7 Audi Generation year 2005-2008. 2.0L TFSI Engine. This video is applicable to many Volkswagen vehicles, such as the A3, A4, Golf, Passat, MK5, MK6, and Jetta. This particular replacement was done on a 2007 model Audi A4.
//SUPPORT THE CHANNEL
Get CWB Merch and Custom Parts Here: craftyworkshopbuilds.com
Support on Patreon: / craftyworkshopbuilds
//RELATED VIDEOS
B7 Audi A4 Top 10 Common Problems - • 2005-2008 B7 Audi A4 2...
Valve Cover Gasket Replacement - • 2005-2008 B7 Audi A4 2...
Timing Belt & Water Pump Replacement - • 2005-2008 B7 Audi A4 T...
//TOOLS & PARTS USED
Electric Ratchet - amzn.to/3kK3T9Y
Pick Tool - amzn.to/360o6Ey
13 mm Wrench - amzn.to/3icnka5
17 mm Wrench - amzn.to/2GdnaS9
8mm Triple Square Bit Socket - amzn.to/3kkv0eQ
Cam Follower - bit.ly/3iVv0Aw
//CAMERA GEAR
○Primary Camera: Sony a6400 - amzn.to/2FYnAwb
○Lens: Sony E 18-55mm f/3.5-5.6 - amzn.to/3cpeN1Y
○Secondary Camera: GoPro HERO8 Black - amzn.to/301z2xV
○Primary Mic: Rode NT-USB-Mini - amzn.to/3x8ydkO
○Secondary Mic: BOYA by-MM1 - amzn.to/3kGS44w
○Light: VILTROX L116T - amzn.to/2RSqkh5
○Tripod: MACTREM CT62 - amzn.to/3i5aJp6
//STAY CONNECTED:
Instagram - / crafty.workshop.builds
Twitter - / craftyworkshopb
Facebook - / craftyworkshopbuilds
DISCLAIMER: Some links included in this description might be affiliate links. If you purchase a product I may receive a tiny commission. There is no additional charge to you! It costs you nothing but helps me big time in keeping these videos coming. Thank you for supporting my channel so I can continue to provide content.

Пікірлер: 80

@PBGarage Жыл бұрын

Great video! Very professionally shot, edited, accurate and no wasted time. Need more creators like you out there!

@petejackson3013 3 жыл бұрын

Nice video easy showing all steps professionally cheers man

@CraftyWorkshopBuilds 3 жыл бұрын

Much respect, thanks for watching!

@UrielArt 3 жыл бұрын

Thanks a bunch! I'm gonna check mine out later this week!

@CraftyWorkshopBuilds 3 жыл бұрын

Yea definitely check and make sure its good. Thanks for watching.

@mrchrisoben Жыл бұрын

Nice work my man I’m going to do this This Saturday 😊

@CraftyWorkshopBuilds Жыл бұрын

Good luck with the replacement 👍🏽

@seth.wright Жыл бұрын

Helped me get the job done thank you!

@CraftyWorkshopBuilds Жыл бұрын

I'm happy I was able to help, thanks for watching!

@seth.wright Жыл бұрын

@@CraftyWorkshopBuilds yea man still working after repair you're out here helping people keep food on the table. Where I stay at ATM you can't walk nowhere work is like 20 miles away, so when car breaks it's catastrophic thanks dude I'm grateful!

@shanec3688 3 жыл бұрын

Excellent video, thanks for your help

@CraftyWorkshopBuilds 3 жыл бұрын

I'm happy I was able to help! Thanks for watching.

@Querenciatv 4 жыл бұрын

Awesome Work 👍

@CraftyWorkshopBuilds 4 жыл бұрын

Thanks for watching!

@josephcazzuto7198 Жыл бұрын

Thanks for posting.

@CraftyWorkshopBuilds Жыл бұрын

Thanks for watching!

@TurboYachtClub 2 жыл бұрын

Thank you

@ianwarriner8193 2 жыл бұрын

Nice and clear , thanks

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect👍🏽

@skittle8 Жыл бұрын

Excellent- you da BES

@veryfastcarssa9572 2 жыл бұрын

Thanks for video keep it up!

@CraftyWorkshopBuilds 2 жыл бұрын

Respect! Yea, definitely.

@Fuelfed Жыл бұрын

Great job!

@CraftyWorkshopBuilds Жыл бұрын

Thanks!

@alimerci3496 7 ай бұрын

Good job 👏

@CraftyWorkshopBuilds 7 ай бұрын

Much respect 👍🏽

@shikinfriedbryce2228 Жыл бұрын

ty sir

@knexrule1 2 жыл бұрын

Helpful.....

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks!

@smokey1-k-no-bee728 Жыл бұрын

Good vid, only thing I couldn't see was where you were working on the banjo bolt! I'm getting epc light, and code p2295 I believe! Says fuel pressure regulator sensor could bad cam follower cause this code?

@deemcgee66 11 ай бұрын

Is there much difference in brand for the pump? Im having a few fault code, p2294, fuel rail pressure regulator valve ... and car in limp mode... not sure if pump replacing will fix the issues, dint want to spend more than necessary to find out... hitachi is about £100 less than bosch ... or cheaper ones on ebay but not sure if i trust them

@crescentandstarglory 4 жыл бұрын

Thanks for the videos brother. Do you have a video on how to change the starter in a B5.5 Passat?

@CraftyWorkshopBuilds 4 жыл бұрын

Sure, no problem. Thanks for watching! Currently, no video on the starter.

@chimasniper4698 9 ай бұрын

hi, i have audi a4 b7 2.0t fsi s-line. I have the following problem eror code (p2293 fuel pressure regulator 2) and two p0087 fuel rail/system pressure too low. The engine runs very poorly. what is the problem?

@jazzer111 2 ай бұрын

did mine on mk5 gti takes few mins saves £££

@CraftyWorkshopBuilds 2 ай бұрын

I'm happy you were able to save, by doing it yourself 👍🏽

@dubbified Жыл бұрын

I've checked out my high pressure fuel pump thimble and I have seen companies out there replace the three bolts with studs do you recommend that? Those metal screws can wear out the head when your servicing every twenty thirty thousand proactively inspecting. I also saw a company sell and updated set up that offers a roller thimble instead of a standard metal cup at the end of the fuel pump touching the cam. The roller update seems to be an intelligent idea. What are your thoughts on this? Great video!

@BattOnly 11 ай бұрын

It works great on VW's because their HPFP are located in the open, on the right side of the engine I believe. On A4's. it is so close to the firewall already, that it would make this job even harder to do.

@ep6438 Жыл бұрын

Did you have to remove anything else to be able to get to the 8mm banjo bolt with the extension?

@CraftyWorkshopBuilds Жыл бұрын

Nah, nothing extra. I showed everything that I Removed.

@BarrioHoncho Жыл бұрын

could this help with a low boost code?

@Dbobber 2 жыл бұрын

Tips on doing this on a 2006 car with no bleeder valve on the HPFP?

@rubenmunoz3981 2 жыл бұрын

I have the same cuestión

@DanK-Mtb Жыл бұрын

@@rubenmunoz3981 remove the high pressure wire/connector and start the car for 10-15 sec freepdfhosting.com/8791e81dac.pdf

@uwu441 6 ай бұрын

maybe unplug the fuze for the HPFP then crank engine over a few times then hopefully it should be fine to take off.

@claysampson2810 2 жыл бұрын

What kind of oil did you use on the cam follower to place it back in?

@CraftyWorkshopBuilds 2 жыл бұрын

I used engine oil, 0w 40.

@loou26 2 жыл бұрын

Trying to figure out what is the cause of my problem. When driving up a gradual hill my car misfires and bogs down, hear valve clatter under load. 2008 with 80k . What should I replace first? Coil packs and plugs?

@CraftyWorkshopBuilds 2 жыл бұрын

Replace the spark plugs first.

@kaliekmiller5056 2 жыл бұрын

Do you know any good sites for 07 A4 wagon parts and plastics. Cheap

@CraftyWorkshopBuilds 2 жыл бұрын

You can check out ECS tuning

@aro8654 2 жыл бұрын

What fault codes and\or symptoms this would make?

@CraftyWorkshopBuilds 2 жыл бұрын

I haven't seen any fault codes for this, and I haven't seen any symptoms either. If you wait for a symptom it might be to late, and already caused damages. I'd suggest replacing it if you don't know the last time it was replaced.

@SuitedMoose Жыл бұрын

Do you need to drain the oil beforehand?

@CraftyWorkshopBuilds Жыл бұрын

Nah, you don't need to.

@SuitedMoose Жыл бұрын

@CraftyWorkshopBuilds Good to know, thanks for response!

@haze_the_alchemist1123 2 жыл бұрын

Crafty what's up man?. I have a question.

@CraftyWorkshopBuilds 2 жыл бұрын

Hey, sup?

@DiscreetNYC 10 ай бұрын

I think stripped the fuel pump. one of my xt30 bolt’s won’t screw in. Someone help please 😢

@lucid622 Жыл бұрын

Just bought a 2006 Quattro 2.0 about 118k miles, I know it’s needs to be oiled regularly along with the cam followers need to be replaced but Is there anything else I be should know , I’m just looking for concerns that I should take care of

@CraftyWorkshopBuilds Жыл бұрын

You could check out my top 10 common problems video, on the b7 audi.

@lucid622 Жыл бұрын

@@CraftyWorkshopBuilds appreciate it mane

@andreweast4505 Жыл бұрын

What damages could a faulty one cause?

@CraftyWorkshopBuilds Жыл бұрын

It could damage the camshaft.

@leo4870 3 жыл бұрын

At what mileage should this be done

@CraftyWorkshopBuilds 3 жыл бұрын

Should be checked every 20k miles, and replace if needed.

@kimimaro7z 2 жыл бұрын

Today I changed that part and it turned out that I did not have it, I did not know. I drove it about 25 thousand kilometers, I didn't see any damage, it could be bad, but how bad?

@CraftyWorkshopBuilds 2 жыл бұрын

It could cause scratches on the crankshaft, which could cause the new cam follower to wear out faster. But you said you didn't notice anything damage.