Great video. If I have a “bad” bobbin I will use it for my top thread no waste.

THANK YOU SO MUCH FOR THIS VIDEO! I just got my Jazz 2 and out of the box I had nothing but trouble! After watching your video, I re-did the bobbin according to your tips. Then I actually threaded the machine CORRECTLY according to your video, and now it works great! The manual is not the best help when it comes to these 2 items. Thanks again!

You are a godsend! I've had this machine for 2 years now, and have had a terrible time threading it, it's been a hit and miss every time, then after I am finally successful, I can't remember what I did. The close ups and your explanation hopefully will solve my problem and I can finally get serious about my sewing! Thanks so much!

I was glad to find your video even though I have had my machine for many years. You are right, it is very sensitive, but if you wind the thread exactly as instructed, it sews like a charm. I would like to see a video where you oil the machine. The picture in my owner's manual does not look exactly like the machine, so I always just do my best. I will ask the sewing machine technician the next time I take it in for a check up. Great video! Thank you!

I recently purchased this machine and absolutely love it!

Thank you so much for this video! I was in tears when I found your video! I feel so much more confident now!

I bought this machine specifically for quilting due to the large throat size and awesome price of $799 and at first hated it because of issues I had with it bird nesting right out of the box. I changed the needle, rethreaded it about 10 times and rewound bobbins. Still bird nesting so I figured I must be doing something wrong and turned to UTube where I found your video and saw I was threading the upper thread incorrectly. I've been sewing for 50+ years and no machine should be THIS difficult to thread, not to mention not friendly for "older eyes". After sewing with it for several projects, I can say that I've grown to like the machine.

I have the same machine that I purchased from Missouri Star and it is a work horse. It is very sensitive but works great. I am wishing that I had spent the money on a computerized machine instead.

Thought abot the Jazz II because of the harp space. I ended up with BL Brilliant though. Love the fancy stitches, especially the serpentine stitch. I use that stitch for lots of kid quilts. Love your explanation of threading. That's very helpful to Jazz owners.

Great video. I love how you verbally explained how to wind the bobbin and thread the machine. Followed by a demonstration of both. Your instructions were very clear and the pace of the instruction was easy to follow.

Thank you! I ran out and bought one!

So glad to get to hear your thoughts on this machine. If I could rationalize the Janome that people compare it to (because of the 12 inch throat), I'd probably want to trade to get away from the FMQ tension problems , but atleast the larger space makes my straight-line quilting much easier and more enjoyable. Nice job, Sheri.

Received my baby loc jazz 2 for my birthday. Your video was very helpful. Just a few of the bobbin and top threading. I thought I was going nuts🤣 thank you again for good details

For #2, you can choose either the left path or the right path. If you use a double needle, you would thread two threads-- one to the right and one to the left. I haven't actually tried it, but that's what I've been told. I also need to hold the upper thread when I go down and around #2 and up #3. If I don't do that, it's hit or miss on whether it will sew correctly.

If you have a poorly wound bobbin, you can use it for your top thread so you don't waste the thread.

I've had this machine for a year and a half. I've never had a problem winding the bobbin correctly. Nor has the bobbin plate ever interfered with anything. I have had the stitch length issue and it doesn't like thick layers...I've had both the thread and the needle break. But I bought it for the throat size as I quilt all my own quilts. I wrecked the timing on my Singer HD quilting a tshirt quilt but this is way sturdier and I am very happy with my purchase. I hope you enjoy yours.

Thank you for this video! I just ordered a Jazz 2 to replace my current and old computerized Brother. You’ve shown me some pinch points that I needed to know about. 🤗

Thank you so much I have the Babylock Allegro and wondered about the threading at point two I was on the wrong side of that tiny bar that sticks out a little. I was left of the bar now I am to the right as you did with the Jazz 2

So happy I found your video! Just got my Baby lock Jazz 2 for Christmas and I love how specific your instructions are. I agree with you about the bobbin case cover. It is quite odd. But, I love the 12" through space. And, With your help, I now have a beautiful stitch. Thank you for sharing 🙂

I had put this machine on my list due to the large throat space and basic stitches. After doing a lot of research, decided that this machine with the wonderful large throat space, had too many issues. I ended up with a brother pacesetter 700 and have been very happy. I do wish for more throat space, but will save up for a Juki straight stitch machine for that in the future.

So glad I found your video! I just ordered a Jazz 2, and wanted to get a head start on how it works. I probably would have never figured out that the dotted line means the thread goes ‘under’ the metal plate! I’ve been quilting with an entry level Singer sewing machine, and knew if I want to continue quilting I’d have to get a machine designed for that. The Jazz 2 seemed like the answer to my dreams while researching features & affordability (big factor), so I am thrilled to have you show the correct way to get started with this machine, as I’m sure you’ve saved me a ton of frustration 😊 ❤

12/10/2022…..I have one on the way so I am very glad I found your informational video! Can’t wait to try it out when it gets here. Thanks so much.

I received my Jazz II yesterday. Your video made it smooth sailing with the start up. Thank you😊

I can't thank you enough for your instructions. They are the best I have seen. I have a Jazz II along with three brother machines. I wanted this one for quilting because of the throat. I have encountered several issues with it though. I put it away for a while using one of the other machines. I took it out today and put it on my quilting Dream Machine quilter. I can get it to sew beautifully but when I attempt to quilt I get the eyelashes on the bottom. I will be using your tips and hopefully they work. Thank you again.

I have been sewing for years (since I was about 8 years old), and have sewn on many machines made in different decades and different price point machines from Singer up to Bernina. The way this threads for both bobbin winding and regular sewing is pretty standard for newer (last 10 years or so) mid priced machines. I had the same problems when I bought my Singer H74 about 10 or 11 years ago, because it was different from the Necchi I had been using for years. Now, I could thread it in my sleep. It's just an adjustment. They all seem to have their quirks.

I've had my Jazz 2 for almost a year now. Boy, have I had issues with it! One had to be returned to the mfr. for replacement as the foot control had a mind of its own. It would continue to sew without my foot on it. Very dangerous. Then I got a replacement and I agree with your assessment. I'm having difficulty with free motion quilting and tension. Also, be aware that the feed dogs will not go back UP unless you press IN on the switch and then run some stitches to engage it. I wish I had gotten the Juki!!

I have had this machine since it was released. I have a really nice mechanical straight stitch machine and needed a zig zag and buttonhole option. This is a mechanical machine and does take quite a bit of trial and error to figure it out. I think going from a computerized machine to a mechanical would be very difficult. I solved the bobbin tension issue by adjusting the tension screw. Yes, it does take some time and trial and error to figure it out, but I now love it! The machine I tried at the dealer sewed perfectly and mine does too. I actually use it for everything!

Thank you for the video. I bought one for quilting and have been very frustrated with it. It's nice to know that I'm not the only one who finds it very "sensitive". Some days are just frustrating.

I just got my new Jazz2 for Christmas. I’m in love so far.

I recently purchased this same machine off of FB Marketplace. It was a great deal and love the 12 inch throat. I am having issues with meandering. I have a constant speed but sometimes my top thread gets hooked under the throat place and makes a mess. I have already broken four needles as well meandering. I will re-thread and load a bobbin correctly and see if that improves the meandering issues. I will let you know!

Thanks for your review. 2 more reasons I like you. 1) correct toilet paper placement 2) we both have Babylock mine is the Verve small but mighty

Thanks for the information. I tightened the bobbin tension screw for bobbin winding. This helped to distribute the thread more evenly between the top and bottom of the bobbin. Before I was getting a fat cone shape, my starting thread would get loose and tangle up with the main bobbin thread (get a birds nest in my bobbin). When threading the bobbin, I started using the rectangle hole in the bobbin top (closer to the center) rather than the hole. This seemed to help with the bobbin thread issue.

I bought me this 1 February of this year. Love it, mostly. Lol

Thank you! I had a heck of a time until I learned to go under that plate when threading the top.

I am seriously considering buying a Jazz II and this was very helpful. If you do something similar in the future, it would be easier to see if you use a dark thread instead of white.

Wonderful review. I’m eyeing this machine for my everyday sewing and quilting projects. It’s time to upgrade from my hand me down machine.

Interesting...love the throat space...the low shank on my machine gives my arthritic hands a problem with the screws and small screwdriver..( Janome 3160) ...l did get a larger headed screw but have to change it back to the smaller one when l use my one step buttonholer as it interferes with the electronic eye that picks up the size pf my button...ask me how l found that out!! Lol

Thank you so much! I was winding my bobbins wrong! I also just figured out the tension in the free motion quilting part so I’m liking it better now

I just today bought this machine and had to thread it and wide the bobbin. My heart kind of felt heavy I actually thought I bought a lemon. Your lesson is going to help a great deal. Thank you so much. I have pre filled bobbins which I used with my dream machine , will they work in my Jaz.

Overall good video! However, I disagree with the threading demo. I tried that at firtst and it would sew for about a minute then started acting it and not sewing. I wasting a lot of time rethreading and the same problem. So, I followed closely the threading demo on the machine, and bypass the hook for the bobbin winding video, and went directly to following the threading demo and went directly to the hook with the two hooks sticking up and Hooray!! It sew perfectly!!!

I’ve been going back and forth for months between the Jazz II and the Juki 2010Q. I have a sewing/embroidery machine but would like something simple and sturdy for piecing and quilting.

I can't tell you how glad I am you did this video. I bought a Jazz II in January and I have had so many problems trying to get it to sew correctly. You have solved my problems. One question I have is how do you get the post to stand vertical. The booklet says it's possible but I have tried everything I know and it won't stand up. Thank you again.

I’m thinking of buying this machine mostly because of the width to right of the needle. But after seeing your video I’m questioning whether I want to. Is it me or is the upper threading and bobbin winding insanely complicated? And further, if you don’t navigate this complicated threading correctly, its sensitivity means you are doomed. Sounds like a recipe for high blood pressure! What do you get for its unique threading? Every machine I’ve sewn on has basically the same simple threading and winding. I’m assuming you get used to it? I’m not interested in looking up how to thread and wind every time.

I have a Baby Lock Soprano and Zest which isn’t as complicated as yours to wind bobbins and thread.

I'm using a HD Singer machine, it's a workhorse. Now that I started quilting I've thought of getting something with larger throat. The Singer has only 6" 😬😳

I just got this yesterday, spent all day threading, rethreading. Winding, and rewinding bobbins. Still have horrible bird nests on bottom fabric 😥

I have been an avid sewer for 40 years! This machine was my worst purchase ever!!! Bobbins and threading should not be this difficult

It seems like they made it more difficult to wind bobbins and thread the machine. Baby Lock snd Brother are the same machines I was told. This seems like more steps have been added.

I got one of these 2 years ago. It does a nice job, but I'm not crazy about the thread path setup for winding a bobbin or threading. I find the foot pedal is super sensitive. It frustrated a couple of my granddaughters because the lightest touch set it off if you have your foot over the pedal and you're not ready. I'm disappointed in the lack of more pressure with the presser foot while piecing. I feel like there's too much play yet even with the most pressure selected. And like several other people I found online, mine is not totally cooperative when it comes to freemotion quilting. After several adjustments, different threads, needles, etc, I decided I won't be using it for FMQ (I've got 30+ years of FMQ on domestic machines. My point is, I'm not a newbie and I've used a few different machines to do FMQ). On the plus side: it stitches beautifully, I like the extra throat space, the extra stitches I'm able to do, and the light under the throat area and I paid $600 for mine new, which is reasonable

You mentioned in past videos that you had issues with the walking foot. Did you get that resolved? Also, the guide bar in the back that didn’t stay put. Honestly, if you had to do it again, would you get this machine?

so frustrated with my JazzII! Tension will not adjust, nothing but eyelashes. It's about 4 months old, and probably going into the shop this weekend. Yes, I've rethreaded, top, bobbin, changed bobbin, changed thread, changed needle, and yes, the presser foot is down.

This has been the worst learning curve for threading I have ever dealt with. But I am learning.

Excellent video. I have not been able to find the height of the throat space (I know the width is 12", which is great) on this machine, need that to choose between this machine and something like an older Janome Horizon 8200 with an 11" w x 4.7" high throat space. Would you buy this machine again? I used to own a Horizon 7700, but felt it had too much computerized stuff that could go wrong and I used only the straight stitch for free motion quilting anyway. Thanks~Cynthia

How well did you like the free motion quilting process? Do you like the free motion foot? Thanks.

Please demonstrate how to put in the bobbin.

Ok please help . I plugged my foot pedal in heard sound that it was connected but when I push the pedal the needle doesn’t go up and down

Thanks helped me decide. 🙂

Can prewound bobbins be used, which style (I use "L" on my other machines)) The electric power cord seems to be somewhat short, does it have any problems with using an extension power. Should it be put into a surge protector and what size.

What walking foot did you purchase for this machine?

Can you tell me why my machine doesn't saw on a normal straight line and it gathers all the bottom stitch like a birds nest ..please help im new to this

What type of thread do you like to use the best

I’ve had mine for about a month. I’m using it as a second machine just to do the quilting on my quilts using a walking foot. I’ve had so much trouble with consistent stitch length, which seems crazy to me especially using a walking foot. Have you experienced this, and were you able to figure out how to keep your stitch length consistent?

This is the second time I have watched your video but seems I am a slow learner as you clearly described all the issues I have had and how to correct them. I am not getting nice stitching on the underside, it almost looks like something for a knit, any suggestions, I have tried to adjust the tension but it seems as though the top and bottom were on two different occasions.

Do you wax or polish your acrylic to make it slick? I bought one (acrylic table extension) for my machine but my fabric does not glide at all on it.

Wear about the foot pressure button???? 22:11 22:13

I have trouble getting the needle in the center position. Have you had this issue and if so what did you do. Thanks for your video.

Excellent++ Video! Is there a machine in this Class that is a little less tricky? ;-)

How long is the neck?

Like to use for free motion ive not tried that on this machine the directions are vauge not sure of settings

How does the needle threader work?

I don’t like how much it vibrates at medium to high speed.

My Jazz 11 will not sew a stitch at all.

I hate this machine. Anything that cost this much should not be this hard. It puckers/gathers when quilting / straight stitching. It’s hard to thread and hard to wind the bobbin. I finally decided to just buy the rewound bobbins. Sewing on this machine has taken the joy out of sewing.

Easiest thing to do is buy prewound bobbins

Learn to keep your hands out of the way. 😂