Here's the quick version of how to clean and troubleshoot your Baby Lock Sewing Machine.
Пікірлер: 122
@patnichols78652 жыл бұрын
Thank you so much. I knew the problem involved the top threading but couldn’t figure it out. In 5 minutes your video was the answer, needle up and foot up did it.
@PeggyLobato Жыл бұрын
Thank you for this helpful information! I was ready to take it to a shop to be repaired. No need now! You just saved me $80! Sew on!
@ruthhurley8002 жыл бұрын
I have always been told to never pull the top thread out backwards. Cut the thread at the spool and pull it out of the machine from the needle. Pulling the thread backwards can damage the threading path.
@ashevillecottonco2 ай бұрын
Hi Ruth, I know it's been years since you posted this. I didn't even realize I had comments because I'm so KZfaq challenged! lol. Yes, cutting the thread and pulling it through the bottom is the best way for thread to travel through a machine. If I feel ANY resistance at all while pulling it backwards, I stop and pull the other direction! However, having owned a sewing machine shop for almost 27 years, I hardly ever come across anyone who has damaged their machine by pulling the thread out backwards. Thread does sometimes get stuck in the takeup lever or sometimes in the check spring (it looks like a little paper clip straight down below the takeup lever). I see that occasionally, but I'm not sure why it has happened to a particular customer. Thanks for the reminder to pull the thread out the other direction. I'm so used to doing it the other way I'll probably never remember. :-) Happy sewing!
@tracies30653 ай бұрын
Thank you so much! Helped fix my problem without having to pay a ton of money and be without my machine while it gets serviced for a second time in 5 months!!
@paml26423 жыл бұрын
This solved my problem! I had put my bobbin case back incorrectly. Did as you showed and I'm back in business. Thank you!
@jenniferhuse1812 жыл бұрын
Thank you!!!!! Thank you, thank you!!!! I was about to cry. I’ve had my machine for a year and made fleece hats for Christmas and didn’t realize it needed to be cleaned out. Once again thank you
@NurseGreeneyesRN2 жыл бұрын
I work with fleece too!!! This video helped me SO much! I was i having a small crisis 🤣 which Machine do you have? I have the Aria.
@clutchnshift110 ай бұрын
Hi! You had me at “re-thread”. Found out the hook was missed, all good now - thanks!
@NutmegRose Жыл бұрын
Thank you! My needle was stuck and I took apart the whole bobbin apparatus. Then needed help putting it back together. Thank you!!
@janetmavi5997 Жыл бұрын
i am new to sewing and love my baby lock. You solved all my problems today with one video!!
@bonnibergstrom5562 Жыл бұрын
Thanks so much for walking me through the reinstall for the bobbin threader. I’m a new sew-er and still just getting familiar with my Presto 2. Whew! Your video was a lifesaver. 👍🏼
@NurseGreeneyesRN2 жыл бұрын
Oh my gosh! You are a sewing Baby Lock savior! I had no idea the grey plate can come off with out unscrewing the silver plate 🤦♀️ i was getting thread nest under my fabric. Because i didn't but the bobbin thingy right with the dots connected. Yikes!!! I was in panic mode because i have a huge order to fulfill. After following your tips. My baby lock is back to normal. Gosh!!! You made a huuuuuge difference in my day! Thaaaaank you!!! Definitely gonna subscribe now!! Yaneri 🥰
@starfishgurl19842 жыл бұрын
Same, I had no idea they came off separately and I’ve had my baby lock machine for 18 years sadly 😂😂😂. You learn something new everyday!
@Mstoot72 жыл бұрын
THANK YOU SO MUCH FOR SHARING THIS INFO!!! I just ran into some trouble with my Brilliant automatic threader not working and your tips literally did the trick! Now I don’t have to make a service trip to my local dealer and I’m back to sewing again!! You’re a life saver 💜
@carolynhack26956 ай бұрын
Thank you! Your instructions are so easy to follow and complete!!!!❤
@gayledobbs1399 Жыл бұрын
I failed to thank you for the tips in the video! Your instructions were clear and concise! I will try cleaning underneath and give it a try again! Thank you so much for your instructions and I have subscribed to your channel and told a couple of my sewing-friends about you too!
@rosepaul96812 жыл бұрын
Excellent explanation of how things work or why they don't.
@kavenel6 ай бұрын
This worked! I’m back to sewing instead of servicing my machine! Greatly appreciate 🎉
@LorineLo Жыл бұрын
That was very helpful! I’m new to the Baby Lock family…thankful to see how to clean it!!
@vivb.2817 Жыл бұрын
Very nicely explained. One thing the Babylock Customer Support told me once was the the thread spool must always be placed with the thread coming forward from BELOW the spool. Hope that helps someone. Thank you for your video.
@ellenhofer33433 жыл бұрын
Hi I've always been told not to pull the top thread back through the machine. We should cut thread at the spool and pull the thread through the needke end. This stops from pulling lint through the disks & machine Its something that is mentioned at every class I've taken. .
@ashevillecottonco2 ай бұрын
Hi Ellen, I know it's been years since you posted this. I didn't even realize I had comments because I'm so KZfaq challenged! lol. Yes, cutting the thread and pulling it through the bottom is the best way for thread to travel through a machine. If I feel ANY resistance at all while pulling it backwards, I stop and pull the other direction! However, having owned a sewing machine shop for almost 27 years, I hardly ever come across anyone who has damaged their machine by pulling the thread out backwards. Thread does sometimes get stuck in the takeup lever or sometimes in the check spring (it looks like a little paper clip straight down below the takeup lever). I see that occasionally, but I'm not sure why it has happened to a particular customer. Thanks for the reminder to pull the thread out the other direction. I'm so used to doing it the other way I'll probably never remember. :-) Happy sewing!
@M.-xf2ve8 ай бұрын
Thank you! I know it has been a few years since you posted this, but very appreciative. Have a happy holidays!
@jeanmariemead7163 Жыл бұрын
Just found your page and I am so happy! I am still getting to know my Baby Lock Ellure Plus and a bit frustrated!
@malibu4052 жыл бұрын
Subscribed! So thankful for your video. I spent time, I thought, doing all these things, but I tell ya, i just followed your directions exactly, and this time it worked 🤷🏼♀️🧡. Maybe I was skipping some steps. Thank you!
@lovefornature89313 жыл бұрын
Want to thank you because of this video you helped me solve the problem i was having with my machine for days😇🙏
@jeaniehill45843 жыл бұрын
Thank you so very much. I never knew to do this. I’d been sewing tshirt quilts and polar fleece so my lint bunnies were hiding.
@bdgrib3 жыл бұрын
My machine was a mess inside. Thank you so much for doing your video.
@rebeccaford2223 Жыл бұрын
One million thousand likes.. thank you 😊
@sueutgaard6322 жыл бұрын
Thank you so much!! My threading path wasn't grabbing the thread and I made certain I first dusted my bobbin nest and then put my thread and presser foot in the upper position to upper thread and waalah!, I am back in business!! ( embroidering Harry Potter crests onto future little wizard robes for grand daughter's 8th birthday).
@saraaronzon45624 ай бұрын
So glad I found you!
@summermitchell98810 ай бұрын
Thank you for sharing this video! It is so helpful!!
@bonniemanley9235 Жыл бұрын
Thank you. My needle has been acting up, think it went thru the bobbin plastic. Hopefully I will figure it out with your help.
@meganroussel37502 жыл бұрын
Thank you! This gave me so much info that I needed:) The tips are great and you are awesome!
@tracyrussell41162 жыл бұрын
Thank you! I follow the others to say they didn’t know the plates came off like that very good information!! Thank you again! About min 8, you talked about the needle threader. LOVE THAT FEATURE when it worked . I’m having issues with my threader. I don’t think I’ve had two smaller needle ( 14’s only), but it’s not threading m. I gave up and got my fat hand in to thread the needle.
@rosepaul96812 жыл бұрын
My needle threader stopped working the other day. I did all this then looked above the needle. Where the take up lever is there was lint. I used a cleaning tool to remove fluff. After that, threader worked fine.
@ashevillecottonco2 ай бұрын
I know it's been a year now... I didn't even know I had comments on the video! lol. But make sure the needle threader is in the up position using the up/down button. Make sure you're using a size 80/12 or larger needle. If it doesn't work at that point, the tiny little hook is bent. You can get a magnifier and cell phone light to look at it (or in my case someone who has much better eyes than me) and bend it back to center using a tiny flat head screwdriver. Sometimes it's just beyond repair because it's bent so crooked and you'll need a new one. Good luck!
@Tucker2love11 ай бұрын
Thank you! I learned new things today!!!
@starfishgurl19842 жыл бұрын
Thanks so much for this video! I’d already tried pretty much every step you listed to fix my machine and my thread was still getting caught on the lower bobbin arm catcher thing (the metal rod with the curved cutout where the upper bobbin thread catches the lower thread) but somehow while watching your video whatever had misaligned itself magically realigned itself and it was fixed just like that. Hahaha, somehow my machine responded to your magic touch vicariously and fixed itself in the process, no idea how or what exactly was off but thanks!
@ashevillecottonco2 ай бұрын
I'm just now seeing comments because I'm not a KZfaq guru. LOL. But I had to respond to you. This happens ALL THE TIME at my shop. lol. It's like the machines know I'm the boss! hee hee
@pennyjensen146 Жыл бұрын
Hi my question is why wouldn’t my bottom bobbin thread come up when I’m trying to free motion quilt. I have checked and rechecked all the steps and the bottom bobbin thread will not come up. I have the blm melody baby lock. I would appreciate any feedback you might have. Thank you.
@peeshyholland4336 ай бұрын
My bobbin stitches are really loose and uneven. Is there an adjustment for this? I only know about the top tension.
@jenniferfowler6713Ай бұрын
Thank you, I will try this
@celestebradshaw60308 ай бұрын
Just that little knick was kicking my bobbin out?! Thank you for your help 🙏
@kerrykastle79643 жыл бұрын
I have a Baby Lock Soprano and it is unthreading after each seam I sew. I am using Aurifil 50 wt Cotton Mako thread. I have tried putting the thread on a stand and not using the built in thread cutter so I have a longer tail. I saw a video on BL tips and she said to make sure the thread grabber is in the high position. Nothing has worked. My sister had a Soprano too and had the same problem so she got rid of it. I like this machine but it's annoying to be constantly be threading the machine. Have you heard of others with Sopranos having the same problem
@junybug68 Жыл бұрын
I am having trouble with my bobbin casing. My thread is jamming up on the bottom. I’ve tried resetting tension. I’ve tried cleaning out the Bob and I don’t know if I put the bobbin back in wrong or if it’s I’m not quite sure how to put it back in since it does not show you this in the book. Maybe you can help me in this area I sure need it.
@bhagwatitrivedi22 Жыл бұрын
I have baby lock sofia To day bobin thread is not catching up And fabric get stuck Can I solve it? Just three months ago I get serviced. Thanks
@gayledobbs1399 Жыл бұрын
I stumbled onto your video on home-maintenance for BabyLock sewing machine. The machine looked very much like my Flourish II. Just yesterday I had trouble which the following statement appeared in the window: "the safety device has been activated. Is the tread tangled? is the needle bent? Didn't break needle but replaced it. Thread is bunching up under the bobbin. Have turned off machine for 15 minutes. My project is: embroidery on a rope coaster using just a single initial; I've already done 10 seamlessly. Using a Jean needle. I have slowed the machine to 500 (just on the last attempt. Has been hard to find the screen on how to do that). How do I unlock the machine? I bought the machine just as Covid was shutting down companies. I got one lesson under the belt b4 they closed. I have just started regularly using the machine a couple of months ago and haven't had issues. I just heard I was supposed to take the machine in yearly for a check-up (is that right? or how many stitches you've done?). Dealer didn't tell me to do that so, I haven't done it. Please help me if you can. Sorry for the long text!
@ashevillecottonco2 ай бұрын
Hi! I know it's been almost a year since your post. I didn't even know I had comments! lol. It is recommended that you have the machine serviced once a year although some of my customers wait a little longer and others come in sooner. The "safety device is activated" alarm is basically just shutting down the system because something is jammed. That keeps the machine from putting stress on the circuit board, so it's a good thing. Hopefully you've got it going by now but if this happens again, just remove the bobbin case and make sure the handwheel can move freely. Clean in there, check the bobbin case for nicks and damage, put it all back together, and typically it will work. Good luck!
@shanebarstad4611 Жыл бұрын
Hi, would you by chance now how to help with my babylock sofia 2, the sewing machine is sewing in reverse, I am wandering if my reverse button is stuck, do you have any ideans of what I can do
@sylviatolan18143 жыл бұрын
Thank you. Great job! Possible to do a very close up of bli!nd hem foot and loading the fabric with that foot. Wish I saw this before spending $180. I was having a prob with tension. I'll now leave my machine with needle up and presser foot up!
@lindawelk2222 Жыл бұрын
I have the exact same machine Lyric and have kept taking it in for repair and unless I’m too old to sew I need some help on trying to fix this on my own with your help! I can’t get the threader to work and I also have Trouble trying to quilt with it! Please help if you can. I’m in Canada and have been sewing for 58 yrs.
@sailordixie2 жыл бұрын
Thanks for you video. I have a Baby Lock ESL. Do you know what type of software cartridges it uses to insert into the machine?
@ashevillecottonco2 ай бұрын
I know it's been years since you posted. I didn't even know I had comments! lol. You'll be looking for Babylock or Brother Embroidery Cards. They're no longer made, but you can find them on Etsy and Ebay. The newer machines have a USB port or wi-fi so that you can download designs from the internet. Have fun!
@sherrieeggenberger956211 ай бұрын
Thank you so much! My needle is hitting the metal circle case that the black bobbin holder sits in. How do I adjust it so the needle will go all the ways down and not hit the sliver case?
@ashevillecottonco2 ай бұрын
Hi! I know it's been almost a year since your post. I didn't even know I had comments! lol. If your needle is hitting the bobbin case, unfortunately, that's a service call. Good luck to you!
@christinabrown20724 жыл бұрын
Hello, could you possibly help me? I have a babylock brilliant and everything I cut my thread when I'm finished sewing, it won't cut all the way off. I have to end up pulling it off. What am I doing wrong??
@ellenhofer33433 жыл бұрын
My Brilliant does this sometimes. Usually it needs a good cleaning under the throat plate remoce the screws and the netal & plastic plates, then remove the bobbin & race and clean it out. The cutter is to the left of the needle where there is a litle brush area. That usually works for me
@user-ee8kb5xg7l4 ай бұрын
How do I keep my thread from knotting up when I first begin a seam
@gigiontube Жыл бұрын
Thank you so much for this video. Please see if you can answer my question, maybe you make another video on this subject. My needle is not centered anymore. So: How can we center the needle ? I found various videos in this subject but for different machine which are not the same as Babylock. I have a Brilliant model. TYIA for any help you can provide !
@ashevillecottonco2 ай бұрын
Hi! I know it's been almost a year since your post. I didn't even know I had comments! lol. If the needle isn't centered, unfortunately, that's a service call. UNLESS.... you have the width control setting turned on. Some models have a setting that allows you to use the speed limit slider to move the needle position. If you have that turned on, the needle will move side to side when you move the speed slider. Good luck!
@gigiontube2 ай бұрын
@@ashevillecottonco Thank you for replying. After I struggled a lot, read almost the entire machine book to see if I find any instructions, sent messages to different people including you… I got tired. So, I turned the machine off. When I look at needle, without expecting anything to happen… the needle repositioned itself in center. I was… wow !?!? And obvious I was curious what happens if I turn the machine on again. Guess what ? The needle stayed in center. I turned the machine off and on again just to make sure I’m not dreaming and the needle was still in center. So, it fixed itself just by turning off and on. Have a great day !
@missygrafe86423 жыл бұрын
Thank you!! I have been using my Babylock Verve and it was sewing not quite straight...i had not cleaned it, ever. Oops! I followed your steps and cleaned it out with the brush and followed up with a hairdryer on low to blow out remainders. I was amazed at how much fiber dust was in there.
@bobsgirl220007 ай бұрын
On my baby lock Jazz11 bring thread up to number 5-4 thread broke cant get to ouy too tight to pull
@violetjacotine6237 Жыл бұрын
I have a baby.locķ eclipse dx and suddenly 1 of the air ports is not feeding h is there so etching I can use to clear the fingers
@melissamiller2464 Жыл бұрын
I am looking for videos on Baby Lock Tempo . I bought a used one. I printed the manual but tutorials would be awesome.
@ashevillecottonco2 ай бұрын
Hi! I know it's been almost a year since your post. I didn't even know I had comments! lol. Babylock has a KZfaq channel and also Love of Sewing classes that you can purchase. Don't limit yourself to just the Tempo videos, though. Most of the BabyLock machine videos will pertain to your machine, especially Brilliant, Lyric, Soprano, Presto, and the older models including Decorator's Choice, Quilter's Choice and probably some others I'm forgetting. Have fun!
@clairehart62674 ай бұрын
Thank you
@bennylehman70152 жыл бұрын
Thanks for a great tutoring video - but HELP !!! I have this issue and Baby Lock technical support is horrendous! I susspect were "talking" to an artificial intelligence robot - they do not respond directly to queries ! Sorry letting off steam / Wonder if you can help me I switch on the unit (Crescendo Model BLCR ) and receive the message The Guideline Marker was not operating properly" then immediately got a second message saying "A malfunction occurred, turn off, then on" Then the screen freezes! No solution - any idea ? Thanks !! also to your youtube material !
@smvestal1 Жыл бұрын
HI! we are having issues with the safety device activated - it spend 8 weeks in the shop and they could not "replicate" the problem. Brought it home 100 buckspoorer and cannot sew more than an inch without the same problem. If you hold your hands completely away from the machine, it might sew 5 or 6 inches before the "safety device" is activiated. It has been a problem for a long time, I have given up on this very expensive machine. Any suggestions>?
@gypsymoontarotofficial3 жыл бұрын
I have an Ellegro that will stay on only for a little bit of time when in use. But it will stay on when not in use. Any suggestions
@roxie11173 жыл бұрын
My Babylock Symphony will not threads. (It used to). I have throughly cleaned it. Any suggestions?
@kikaydastarfish3 жыл бұрын
Hi! Please help me. I have a baby lock brilliant. I just cleaned it . I removed the needle plate just like you did to gently clean with a brush. Suddenly when I start sewing it won't let me use any other stitch patterns other than the straight stitch no.3. Whatever I press, the other patterns it would stay on no.3 stitch needle position. can't do any zigzag or any decorative stitch. Whenever I would press the decorative stitch patterns category it will say "TURN OFF THE POWER AND REPLACE THE NEEDLE PLATE." I tried turning it off and taking off the needle plate and put it back on but it will still give me the same problem. would you know what I could do to fix it? Please help me! Thank you!!!
@ruthhurley8002 жыл бұрын
Have you checked the error messages and the fixes in the back of the manual
@queenegreene39263 жыл бұрын
Suddenly got a "FO5" or "F05" (not certain if its an O or a zero) Error Message and machine (Baby Lock Designers Model) is locked. Help?
@tonyajones59222 жыл бұрын
I have a Babylock Presto II. What code on the front panel should I use for a pretty straight stitch? My machine is currently set at 3.5 and 2.0, but my stitches look like they run together on the top of the fabric. Any suggestions would be greatly appreciated.
@rosepaul96812 жыл бұрын
Have you looked in your settings pages? There is a line called fine stitch adjustment or something like that. My Baby Lock is a Brilliant. The setting guide is on the right side of the screen on mine, at the top. The icon looks like a page with the corner turned down.
@bettygryner25463 жыл бұрын
Do you think that is the answer for the problems with jezz baby lock two
@meondarocks3 жыл бұрын
My hand wheel is stuck! Help. What can I do?
@ellenhofer33433 жыл бұрын
Have you removed it znd checked for thread inside it?
@weeksd29032 жыл бұрын
My put on the walking foot, but my needle shows in the middle, but when I look at it, it is in the far left position. I tried to move it but not working
@kevdogcle99552 жыл бұрын
My machine is clicking. I changed the needle. I cleaned it, adjusted the tension. But, it is still clicking and the thread keeps snapping or breaking. I adjusted it. But have no clue what wrong. I think I might need a new machine. Lol I make quilts and have 7 I have to finish before Christmas.
@collettegay1432 Жыл бұрын
I saw in my guide book to use 75/11 needles
@ltsaysso2u3 жыл бұрын
I have a piece of thread stuck in the threading system bu the #4 spot. I can grasp it, but it is stuck stuck stuck. I called a rep at the company and they told me to take it to the shop. I have had it for one month. It is probably due to having not threading it correctly. how can I get that piece of thread out? I can't use the machine with it in there.
@lucyedwards78962 жыл бұрын
did you ever find out? I have the same issue
@nataliefinch67132 жыл бұрын
Thank you. It looked like you pulled your thread from the top. The diagram on my baby lock has you pull it from the bottom. Does that matter with cross wound thread?
@ashevillecottonco2 ай бұрын
I know it's been years since you posted, but I didn't even know I had comments! lol. My customers and I never have problems with the thread going one direction or the other as long as we use quality thread. Mettler, Aurifil, Cotton + Steel, etc. If you have trouble with a random thread, you may have to play with the direction because some threads actually untwist as they are sewn into the seam if they're going the wrong way on the spool holder. good luck!
@nataliefinch67132 ай бұрын
@@ashevillecottonco thanks! I use quality thread and not had an issue either, but it's kind of a hot topic in a group I'm in. So I was curious your take....
@mm-jn1gz3 жыл бұрын
My Babylock symphony does not reverse when I press the reverse stitch lock button. What could be wrong?
@nonni01132 жыл бұрын
Help, what could be causing the needle and bobbin to make a clacking sound.
@carriebergerrosenthal48552 жыл бұрын
My machine will only sew backwards... I'm really far from the nearest Baby Lock Repair; what can I do?
@annaplatt25972 жыл бұрын
What make your babylock have a tapping sound.
@josephineramirez95273 жыл бұрын
My fabric is not moving as I see on a baby lock presto II. What can I do.
@rken5633 жыл бұрын
Just bought new baby lock jubilant and received 3 weeks ago. Worked fine right away. When I used it yesterday the foot pedal when plugged in gave an f4 error message. The finger power worked fine. I called the company and they are replacing it, but I’m concerned it will happen again. Have you heard of this issue from others?
@ashevillecottonco2 ай бұрын
Hi! I know it's been years since your post. I didn't even know I had comments! lol. An f4 error is pretty rare unless you plug in the wrong foot control, so I'll bet you'll never see that again!
@AnnD1359 ай бұрын
I keep getting an error: turn off and replace plate. Can you help?
@anns1286 Жыл бұрын
my threader will not thread, what can I do
@valiaklyashitsky64443 жыл бұрын
How can I contact you? cannot find your email. I have issue with upper thread tension. seems like I did all correct, but is not tight enough.
@carriescomfortquilts29243 жыл бұрын
Great idea I wish we can message our questions to her !
@lindabaker93522 жыл бұрын
I Have a Babylock Serenade It sews great But when i stop sewing and try to start again the computer shows error on screen. It is about 12 yrs old.
@jeankinde763 Жыл бұрын
How do you turn off zigzag contoll?
@brish573 жыл бұрын
My top thread will not pick up my bobbin thread. I have Babylock Jazz II
@carriescomfortquilts29243 жыл бұрын
My plate cover is on the right way it still says please attach plate cover on the screen can u please reply back ! Thanks happy Easter! Love your videos !
@user-my3cx9cd6c2 жыл бұрын
Thank you!
@pauletteparden73012 жыл бұрын
My baby lock brilliance lettering is all messed up can you help?
@karenweidenhammer29622 жыл бұрын
how do you fix a crooked foot on my lyric babylock
@AprilSwan-hc9qq Жыл бұрын
My Babyloc verve fabric gets stuck every time I sew
@bridgettesimmons1 Жыл бұрын
It worked!!!
@smvestal1 Жыл бұрын
PS they did clean the machine and its a Soprano 😀
@rjbaker92862 жыл бұрын
I cannot remove my needle plate? It’s stuck! Any suggestions?
@rosepaul96812 жыл бұрын
If it's the metal plate, you'll have to unscrew it first. If it's the plastic part, open your tray in front, then try sliding it toward you.
@barbarawaddellwaddell26873 жыл бұрын
How do I replace the spool pin
@soymol63793 жыл бұрын
Could you teach how to clean and put oil on the whole machine?
@rosepaul96812 жыл бұрын
Mechanical machines can be oiled but not computerized machines.
@davidtharp79213 жыл бұрын
HOW MUCH IS THIS BABY LOCK
@marygonzalez89023 жыл бұрын
The back tack button not working
@bonniemullins-kk9ky4 ай бұрын
Machine locked up.
@janeblack81332 жыл бұрын
T H A N K. Y O U.
@DunnGoneOkie2 ай бұрын
Don’t pull out your thread that way
@joesoliz28783 жыл бұрын
D
@privatecitizen12465 ай бұрын
I turned it off and completely rethreaded it and STILL E1 FUCKING ERROR. BABYLOCK IS THE WORST BRAND EVER!!!!!!