I'm really glad you have done this video, i was considering one of these, but had nothing to go by for the Meriva B. Thanks so much! Nice detailed video too

Smart A** 😂I just love the way you do you work bless you my good friend and thanks again for all the videos and information you have provided to us all out there cheers

This is awesome. I love my meriva but the stereo is the only downer. Dunno if im brave enough yet but its nice that there is options

Hi, super videos, this and the other with the settings! I managed to get the original radio cable with the big plug up to the display. Without that I had to extend wires! But, this is a hard job and you need a lot of patience in addition to very small hands. The microphone and a USB cable I put under the original radio and heater buttons in this small indentation, just below. There are openings large enough to route the cables without having to cut anything out. Nevertheless, they are easily accessible there. Laying the camera cable and the supply for it was another challenge, especially in the trunk lid. All the best, the device is otherwise top.

Any updates for a fix on the red door light fault? I cant buy one until this is resolved my ocd is holding me back from purchasing

Cracking work as always @baconbutties

Thank you for your video, my question is, for car settings like automatically turning on the air conditioning or adjusting the signal sound, I do these through the Config button on CD 300. If I install this CarPlay, where will I adjust these settings? My car is a 2011 Opel Meriva B with CD 300 installed.

The thing up there is a sensor for the airco if you would have climat controle

Great video, please keep us updated. I have searched many time for something like this, but was always searching for 2din. This is a great solution. There are no extra's to purchase for the tire pressure and parking sensor? Is it a menu setting?

Very, very, very interesting and exciting videos which will perhaps encourage me to install a navigation system worthy of the name on my 2013 Opel Meriva B (I'm French)! I have a version of the Meriva without a camera or reversing sensor. So, before giving in, I have a few questions: the link provided in your post refers to a large number of possible versions from Ali (and I'm not even talking about the other models offered). How can you be sure you have a 100% Meriva B version? And do you know what the titles ranging from “2G+32G” to “8G+256G” and “4G+WIFI” mean? Thank you and congratulations for these videos!

Hello, Thank you very much for your video. I have some questions, hope you can help. - Where is the connector for cooling fan? I connected it to blue one which comes from the same place as Audio In/Out, Aux In, etc… but I’m not sure it’s correct as I don’t see the fan rotates. - I don’t see the wire for reverse camera, only for Key1, Key2 and Ant. Do we need to cut a wire for this purpose ? Thank you again.

Did you use a specific kit for extending the wires?

Hi, did you tried installing additional apps like netflix or spotify ? Does it have google store? Can you make a second video showing Android version and spec of the unit.

hello, great review and information, I wonder, does the original factory fitted 'Aux in' USB still work?

@baconbuttties Hi man, thank you very much for the video. What minimum specs do you recommend for the android head unit, like 4 core cpu and 4gb ram? For the installation part, did you have to put the original stereo back in or can we remove it completely?

Can I ask you two things? I also bought the car radio, but it doesn't read me either the steering wheel controls or the buttons on the CD 300 Could you tell me if the code for the Canbus Decoder BOX is something like GM-09 (mine is RZ-GM09). Also how did you connect the CD-300 button box directly to the cable coming from inside or via that adapter bypassing the socket on the CD-300

Hi! I've a Little question: The support is included in The kit or is sold separately? Thanks for The video, greetings!

Thought about installing it in my Meriva, but decided not to do so. For now, at least. For many reasons, actually. 1. Steering wheel buttons issues. They're selling it as a HU for Meriva, but don't have button mapping of Meriva. Nice. 2. To my taste, screen is too tall. It's placed high and doesn't look organic in it's place. Wish that BMW-like wide displays were available, but they're not. 3. Have to change Navi 600 buttons panel to CD300/400 in order for it to work properly (it only supports one type of them) 4. Screen is too distanced to be conveniently used as touchscreen. 5. All the electronics are in the screen module, which is the hottest place of car's interior in summer. Not sure about absence of throttling/performance issues. Not easy to do cable routing. 6. Speaking about routing, I have a GPS antenna on top of the car (as car came with Navi 600), but I still have to use the one which comes with the unit, don't I? The same thing with the microphone for making calls. Why? 7. Dull UI/UX of these unit is a matter of taste, you can use Android Auto exclusively (but why do you ever need that 64G/4G/8cores then?), but I don't like it. So, I'll stick to my original HU, I guess. I enabled rear view camera, turned that "linear output"/"infinity audio system" option, installed Match UP7 DSP amp, Morel Tempo Ultra midbass speakers to front doors, Alpine S-S65 to rear doors and CDT Audio HD2 midtweeters in place or original tweeters, Hiby W3 as BT audio source connected via AUX, set it all up and I can say that sound is soooo much better than it was. But yeah, I still have to use phone on a holder for navigation, which is not cool.

Can I ask you one strange questions? I recently bought a meriva B (here its an opel) and the aux connector is missing. I went into the hole with a scope to see of the cable is there but I couldnt find it. I dont think it was never there so there must be a cable somewhere id say. Are you able to tell me where the cable for the aux module next to the 12 volt cigarette lighter is connected too? Id say it would go from the aux module directly to the radio but in your video i cant quite see. Anyway, great video ^^

Does anybody have problem with config file on device boot? I exported settings and now every time device boot the following message appears "Find factory config file, Do you want to import?" I guess I need to remove it but don't know where to find it in file explorer.

Hello. Very detailed video but i can't see the link to the screen model you purchased... Could uou repost it in the comments?

Do you need to connect the wire the goes into the old display?

Good bless you!

Where are the links to the those? Can't find them. Looks good. Keep us posted 👍🏿

Hi very useful video! where did you get that orange tool to remove the panels?

Hi, thx for the informative Video! Is the device compatible with opel meriva b 2011?

Just wondered if you have tried downloading any apps to the unit, I fancy adding DAB radio but seems it needs the app to work, I have no idea how to connect the head unit to the internet to download the app.

That looks really good! Also have a Meriva and considering upgrading it like this. Will you report if you are satisfied with it after some time? Greetings from Germany.

Just received the unit and already have questions. I see you used the canbus, so that is out of the way. There are two wires that with a lable 12v and buzzer, did you connect those?

For the benefit of those who have to install the unit in question, I can suggest passing the large original connector of the car through an opening between the central tunnel and the back of the main instrumentation (speedometer and rev counter), clearly dismantling the aforementioned instrumentation fixed to the dashboard through two screws. From there there is another opening to pass the large connector through. Well yes, the cable in question is long enough to reach behind the radio in the center of the dashboard. This avoids having to lengthen the wires that are part of the connector. It works I assure you.

What year is your Meriva? Because your android radio is selected for 2009-2014. I have a 2016 Meriva and I wonder if it will work with my car (canbus)

Maybe i'm asking to many questions 😁 but could you put in the link of the DAB usb dongle you bought?

Hello, how did you power the original dashboard of the stereo? The steering wheel controls work perfectly, but those on the dashboard don't

where did you connect the cables afterwards? Behind the radio or no longer installed the CD drive where did you connect the cables afterwards? Behind the radio or no longer installed the CD drive

Hi all, I have a question please, is the screen support included on the radio? Also, should I order the other extra cable separately if I understood correctly? I don't know much about these things, but I would like to order all the pieces and try to install it.

Hi, can i ask you if the central locking works correctly? After fitting this new unit it only closes the rear doors! Thank you

Has anyone lost the sound of the indicators and hazard lights after installing this unit? How did you solve it? I know it’s not the end of the world but worried about future MOT and honestly prefer the audible reminders as reassurance that my indicators are on.

Hi. Did you have any issues with the indicators and parking sensors sound? We can’t manage to make that work since we installed this unit. Thank you

Canbus settings have been updated, now I have meriva 2011 and steering wheel control buttons work as they should. But the front radio panel cd 500 buttons don't work.

and could you add a reversing camera too

Please, where do the loose cables with the inscription key 1 and key2 connect? Thank you

for steering wheel buttons you need to check in configurations to set the correct one, I have installed one in my Meriva B 3 months ago.

which canbus option did you set?i can not find the opel canbox

I've got two questions for the community one I'm trying to find the indicator fuse which I've not been able to find and i brought the Android week 360 on it can anybody tell me the best place to go through the bulkhead into the front of the car if anybody can help me on that

I have a problem - there's no power going to the main unit. The fuse for the radio (located in the footwell) had blown, and even after I replaced it, nothing happens. Is there any advice for this?

Wonderful video, very good explanation of how to fit the unit and a great review of the product. I have been looking forever for a replacement to the factory unit, my stock unit is a CD-400, don't use the CD player, I think it's the same as yours? was just worried about the wiring loom. If yours is the CD-400 its obviously OK, then i'm buying the unit!! thanks again.

Great...do you think this unit is compatible with the 2015 meriva b with cd300 radio? Thank you.

forse per avere un quadro piu' completo dovrei far presente che la mia auto e' del 2011 ed aveva uno stereo originale dvd 800. l'autoradio cinese e' del tutto simile alla tua ma non e' la stessa. ho notato che nelle ozioni del canbus non e' prevista la opel meriva b e quindi ti chiedo quale altra auto posso settare nelle opzioni che sia piu' simile alla mia. infine ho notato che nel cablaggio dell'autoradio cinese e' presente un piccolo cavo con due fili bianco e nero che probabilmente devono essere collegati al quadro comandi originale della vettura. Se sei cosi' gentile da darmi una risposta te ne saro' grato.

I have orderd one and should arrive next month. But my brother asked me if the device needs contstant internet for the apps to work. Do you know about that?

Hello, I also bought a radio similar to yours. I have some questions... What is the connector seen at minute 14:14 for? In the connector that plugs into the canbus box, there are 2 wires (black and white) with another small connector that I have no idea where it goes... The steering wheel controls do not work for me at all... Thank you

Does this come with everythink including the screen holder that goes in the original part ?

Is there a link please to where you bought the unit. How much did it cost. Thanks

buongiorno. ti ringrazio per le informazioni che mi hai fornito. approfitto della tua gentilezza e simpatia per chiederti se hai collegato quel cavetto con i fili bianco e nero all'altro capo del cavo che parte dal quadro di controllo delle stereo originale. se possibile vorrei illuminare, quando si accendono i fari notturni, il quadro comandi originale dell'auto magari tramite ponte. grazie

Sorry also could you tell me how long you extensions were and what unit you got what model unit please

Just tried wiring mine in. It’s got an extra plug that connects to plug where clock comes out of. It also seems to be missing a plug on the loom for the fan. Connected power from main wiring loom and extra socket. Turned ignition on and nothing happened

Hi, I've followed the link as would like one of these but it takes you to a page with about 10head units, how do I know what one you have?

Hello I've just buy one like this but like you said , no book instruction. Do you know where can i find one? Thank you?

Where can I buy an ISO adapter? Please provide a link

I have problem with the steering wheel command , I think key 1 and key 2 need to be plugged,but I don't know where!

need you to buy the screen support separately? You are welcome

Did you buy the 4-64 model?

Le câble qui arrive sur l’ancien afficheur est il branché ??ou libre ?dans le tableau de bord, ou faut-il laisser raccorder à l’ancien afficheur et mettre l’ensemble sous le tableau de bord

Is it with dab? And does it work?

May I change channel using control pannel from original opel and than fix them on original pannel too???

Did you install the camera? Is it working well? Does the camera app starts when you reverse the car? Thank you

not able to see the link for this

Hi, I have meriva b, but cant get fabric volume knob to work, what to do?

Good morning, is it possible to email you? I would like to exchange some information with you about my Android radio in an Opel Meriva.

Hi I'm just watching your video for about 5 the fifth time I just went to the link that you supplied just wondering what model number you purchased the two clips in the little caviar part that you are your fingers with default part of the plastic preiser is what that's for you slide nose Behind Those clips and prize them out the next time don't have to comment but I just want to what part of the country are you

Bonjour et merci pour la video j'ai suivi tous les étapes tel quelle,mais l'ecran ne marche pas même que le milieu de clavier (qui controle la radio ) ne s'allume pas au contraire du bas de clavier qui marche parfaitement, j'ai essayé de revenir à l'ancien afficheur mais il ne veut pas marcher lui aussi😢,est ce que tu as une solution s'il vous plaît car j'ai perdu 5 jours avec ce problème mercii.

so dose that mean you don't have a cd player anymore

Hi all. Does anyone live near Manchester who's managed to install one of these units and could assist with fitting one for me? Obviously I'll pay for your time with this. Also, when I clicked on the AliExpress link there were several units listed.... which one do I go for??? Thank you, Alan

buongiorno cortesemente vorrei sapere come hai collegato l'autoradio cinese al cablaggio originale della opel meriva b perche' a me non funziona il quadro comandi dello stereo originale pur avendo collegato tutti i cavi a disposizione. Se riesci a postare delle foto dei collegamenti oppure un filmato. grazie

Good evening A few days ago I wrote you the following request on your email with an explanatory photo attached. Would you be so kind as to answer me. Thank you: I disturb you for a clarification about the connection of the original cables of the car and the adapter supplied separately with the car radio. What I can not understand is how you connected the black and white cable that is part of the cable and that on one side with the white cable enters the canbus and the black one enters the main adapter that connects with the standard one of the car. Apparently its connection is essential otherwise its existence is not understood. As you can see from the picture, the black connector that incorporates the black and white wire has the perfect shape to connect with the original cable of the car that connects to the control panel or with another cable always original of the car that was originally connected to the monitor in the center of the dashboard. Unfortunately, in neither case do I get positive results. I add, again for logic, that if this additional cable I connect it to the original cable of the control panel in any case the latter can not be simultaneously connected to the original cable of the car and therefore can not be used. Perhaps my explanation was a bit articulate and confusing but I hope I have made myself understood. You're a smart guy. Maybe your interface cable was missing this black and white appendage? I provide you with the photo of the cable highlighting the extra cable (what you see is a test cable but completely identical to the one installed in the car). Thank you for your patience but it drives me crazy.

Hello, i have the same unit for my meriva, but like many other, there are problems first, i need the password for the factory menue, do you have some information about this? thnaks

Hello, first of all Sorry for my bad english, my car is MERIVA B 2011, I need your help for

L’ancien câble afficheur à laisser libre ??

Has anybody having the following problem: 1. Device don't go to sleep if I pull my key out, it wait about one minute and than go to sleep? 2. I can not turn on device if my key is not in ignition state? 3. Android auto can not connect wireless, only by cable?

If anybody has problem with google services or apps that requires internet let me know. I had that problem and they send me new firmware so it is solved now. Also android car wireless works now.

Still satisfied with the purchase?

The one that's just underneath the electric brake behind the little cover

Thanks! Will this works with a small screen from the Merva B as in this picture? media.autoweek.nl/m/m1my6m1bmbr3_800.jpg And what kind of new basefront u have for the navigation?

Just tried wiring mine in. It’s got an extra plug that connects to plug where clock comes out of. It also seems to be missing a plug on the loom for the fan. Connected power from main wiring loom and extra socket. Turned ignition on and nothing happened