Bad Chad found another project... 1956 Plymouth Savoy Club Sedan V8 🚨

Рет қаралды 353,212

Жыл бұрын

We found a 1956 Plymouth Savoy Club Sedan V8 for sale that runs, drives, and stops. The only problem is the listing price is a lot higher than we're willing to offer.... 👀
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoco.com
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #1935plymouth #pickuptruck #1935plymouthtouringsedan #customcars #hotrods #classiccars #cars #fabrication #metalworking #badchadcustoms #automobilererpairshops #bodywork #suspension #autobody #evercoatprimer #primingacar #autobodyrepair #rustrepair #paintprep #primer #badchadandjolene #car #classiccars #hotrod #automobilerepairshops #paintjob #paintingcar #conceptcar #behindthescenes #designing #cardesign #sheetmetal #fabrication #rustrepair #custom #customcars #metalshaping #metalworking #metalsheathing #migwelding #lincolnelectric #fabricating #cars #car #classiccars #classiccar #roofchop #coupe #metalworking #metalshaping #metalfabricator #metalfab #plymouth #runningboards

Пікірлер: 597

@JoeZyzyx Жыл бұрын

My first car in 1972 was a 4 door, 1957 Plymouth Plaza. It had been my grandfather's. No seat belts. 318ci engine in it. Fun car. I like watching that movie "Christine" (has the Fury) at times to remember it. No twist on oil filter, but the older can you put a filter into. Mechanical voltage regulator and a generator as I recall instead of an alternator. Bench seats, front and back, and could pile 8 people into it. It was a fun car. Easy to work under the hood too.

@JoeZyzyx Жыл бұрын

I remember the mechanical regulator had to be "polarized" by creating a short across the contacts in order to properly set it for the generator, if you plan to keep the original type charging system in it.

@chitown1098 Жыл бұрын

My grandfather had one of these (1956 Plymouth Belvedere), light yellow and white with white and black houndstooth interior as well as a huge white ivory steering wheel and push button trans. The yellow was where the darker brown is on this one and white everywhere the lighter brown/tan is. What a beautiful car. My grandfather took incredible care of the car. He even painted the engine and would work on it himself. Unfortunately in 1972 someone t-boned him and destroyed the car. He and my grandmother were crushed since they had had the car for 18 years.

@craigmonteforte1478 Жыл бұрын

this one Cracked me up my Dad had a late 70# Mopar and this motor and the start up sounded exactly like the one My Old Man had I do not remember the make or model my Dad inherited the car from his Fathers Estate ironically i moved 100 mils and i was given that car to use as a tow vehicle for a MG B i pulled with a tow bar to my new location and i sold the old Mopar when i got settled i liked that car because it still had the old fashioned fresh air Vents under the dashboard and on the highway with a window slightly opened you had a heck of a Vortec of fresh air throughout the entire passenger compartment

@kammyHS Жыл бұрын

I’m thinking this guy just wanted to show you everything he has- 😂 Chad wants to talk about the car that’s for sale and there is no end to this guy😂😂😂 out of breath and breathing hard! Chad and Jolene can’t wait to watch this build! Thanks for taking us along on the adventure ❤

@hotrodray6802 Жыл бұрын

Finessing the seller is part of the buy.

@troyleach2095 Жыл бұрын

That’s part of the deal. Whenever you buy off a collector, you gots to see their goods. If they don’t show you their stuff, then you probably ain’t gonna deal, cause they don’t trust ya.

@philipbrailey Жыл бұрын

Obesity is a problem.

@MoparArtbyautomolove Жыл бұрын

This was my car for a few years. Bought it out of a barn in Hoyt, New Brunswick. It originally came from Louisiana. I traded it to the mustache guy for a 1968 Plymouth Barracuda.

@highlandsoutdoors2041 Жыл бұрын

Looks like she had a rough life was it a pile when you had er and did the trans leak

@billhoward7730 Жыл бұрын

You did a great buy on this car. A lot of the 56 Plymouth had a lot of rust issues. The body on this car is extremely solid. 1956 Plymouth was the first year to have the tail fins, one year before the 1957 Chevy. I am an old Mopar fan and love these older Mopars. Great purchase and great video. Bill

@victorsweet583 Жыл бұрын

Your right about the rust...even other cars in the family has a lot of rust issues like some of the old challengers and chargers darts cudas and so on

@1022SLB Жыл бұрын

I do not know how other people feel, but I’ve become disenchanted with how these builds often end abruptly and you move on. The cab over, the Bugatti, and now the pickup… I believe many of your fans would like to see a complete build. The truck pushed me over the edge as I wanted to see it taken all the way thru paint. I have a great imagination, but I’ll just move on to One of the plethora of other shows that at least give us our cargasm! Bitchin Rides, Iron Resurrection, Shortys Dream Shop, Texas Metal… Ian Russell and even Richard Rawlins… they all complete the builds.

@michaelbristol6467 Жыл бұрын

Richard Rawlings never built a car in his life he just spots the $$$. 😎✌

@freddieweimann3602 Жыл бұрын

Bad Chad is a metal fabricator not a mechanic....

@rijobaabojir2779 Жыл бұрын

I agree, it is frustrating. Much like tuning in to watch someone bake a cake but who quits halfway through and starts to make cookies. I believe Chad's skills and interests are limited so he concentrates on what he is capable of doing well then moves on. But it would be nice to know in advance how far he intends to take a project before we invest so much time watching him cut, shape, weld and fill over and over. There is so much more involved in building a car that many of us are interested in and would like to see. This is not bad mouthing, just some personal thoughts I decided to share. I still tune in but not nearly as often.

@michaelbristol6467 Жыл бұрын

@@williamoliver8883 yeah that's why Gene Winfield goes to his shop and paints his cars because he's a "charlatan". Boy some of you haters are pathetic. 😂✌

@michaelbristol6467 Жыл бұрын

You probably never heard of Gene Winfield I bet.

@davidrogers3016 Жыл бұрын

Can’t wait to see what Chad has in mind for this vehicle. Chad and Jolene will entertain us again. They set the bar real high with the pickup conversion.

@THROTTLEPOWER Жыл бұрын

I agree David!!!!!!

@vincentfalso4687 Жыл бұрын

Nice deal and I love the design of that car……WoWW! You and Jolene will have a great time making it your own. I would have like to see the other two cars. I kinda like a four door dropped and some 18” steelies with dog dish caps or bullet center caps…. Anyways, they’re yours to fiddle with…. Love em’!

@bbigtn Жыл бұрын

I remember trying to sleep in the back window area of our Plymouth Savoy when I was around 2 years old and my older brother and me had to sleep in the car rather than in a cabin with our parents and sister at yellowstone Natl park. Don't know if it was a 56 but that back window area reminded me of that. I rolled off and landed on the back seat a lot. Who knew David Crosby had an old Plymouth for sale?

@robkayce6964 Жыл бұрын

Good score on that rare’56 Plymouth! Love it! Love the dashboard. It’s gonna look mean and muscled when you give it the love it needs! It’ll give the ‘57 Chevy a run for its looks and popularity when Bad Chad fine tunes her. Look out! :) Congrats on your purchase. Fair price. You done did good. I know Jim bo is gonna be impressed when he sees her! A good deal is when the seller and the buyer are happy.

@71treestudios35 Жыл бұрын

We love you and Jolene and all the hardwork you guys and the Fam put into these cars and memories on wheels keep educating and absolutely killing it you along with a couple others have motivated me to go to school for auto body thank you keep inspiring!!!!

@bradleymckay365 Жыл бұрын

That front grill is freaking awesome 👌

@jacklioyd8571 Жыл бұрын

First thing I saw was, it would look cool with some Packard tail lights. It runs pretty smooth. Looks like a new project. Car seems to be tight when you shut the doors. You got a good deal on that car. Congrats. Jack.

@liljohn1064 Жыл бұрын

Nice find. Should be an easy project.

@jimk7882 Жыл бұрын

Great find. Everything is there on that car and it's all in good shape. You can tell straight away that the car is a good one by the panel fitment. On top of that it runs and drives. This is the perfect type of car to start with

@algreen2242 Жыл бұрын

What a nice honest car. Great interior. Congratulations.

@petetap4255 Жыл бұрын

Need some furry windshields for your mic's. That'd make a huge difference. Great deal on the Plymouth ...earlier comment said it'd be good to pair up with the pick - up. Inclined to agree .Reckon they'd look great side by side with inverted paint jobs...but,the decision is yours,looking forward to the makeover guys 👍👍

@Joe-lj3ir Жыл бұрын

Great find. Can’t wait to see what you guys do with it. Thanks for sharing

@marklee81 Жыл бұрын

22:17 Whew!! You had me worried, Chad. I really enjoy your paint videos and I kept thinking, "That car isn't rusty enough for Chad." It doesn't need a restoration or a huge transformation. Just style.

@deandee8082 Жыл бұрын

something like that here in the states would be like oh $14k to $18k USD? of course here in the USA they're a Belvedere, different paint schemes and trim levels, engine options so forth run a guy at least 3 times that amount for the similar condition.. a dead minter is around $35k+ low mile dead mnter $70k+ ... that one has the big engine so more likely than not holds a premium for that alone, freshened up that car is worth triple that easily... nice ride for sure, the mid 50's were it for the automotive industry, real power arrived, auto trans, limited slip, and unlike any other generation they were the heaviest of all cars ever made, better steel, thicker gauge, heavier genuine chassis, the ride is like no other..

@leonardhill1218 Жыл бұрын

Right Rita

@williamdahlen1654 Жыл бұрын

Hello Chad & Jolene. I hope that you both have a great day today. Good luck with this build.

@davidbellomy8605 Жыл бұрын

Thanks Jolene and Chad for the ride along! Can’t wait to go along on this journey! Another cool hot rod!!

@simplysimon9868 Жыл бұрын

Chad the poly motor can be converted to a Hemi. The heads were made to bolt right on. Not sure if you saw Alex Taylor and the Hot Rod Plymouth Savoy, they made a race car in 24 days with a crate motor Hellcat. Great shape car!! Mopar or no car. Nice place the guy has there.

@THROTTLEPOWER Жыл бұрын

Great looking Plymouth!! 😍👍

@danhanson6577 Жыл бұрын

Wow great build guys was really hoping you would pair the truck!!!

@RamblinAround Жыл бұрын

Car is in pretty decent shape really. It was running well for being out in the cold too. Good start for a project for sure.

@chrisholland8843 Жыл бұрын

Love the straight Wing back good-looking car

@davescheer5038 Жыл бұрын

🌴this was my grandma’s car her’s was two tone red and black ,mom inherited it after gram passed ,it wasn’t fast but it was trust worthy, this will make a great ride chad and Jolene, 👍

@ronnieniebrugge8229 Жыл бұрын

Now him and Jim can go cruise in their 50s cars Love the shoebox looking cars

@michaelbuettner6560 Жыл бұрын

My dad was a Plymouth mechanic. I learned to drive a 52 Plymouth 4 door retired taxi cab. Now I have a 52 Concord Plymouth fastback... Love the Plymouths.

@sragga Жыл бұрын

bought my '56 plymouth savoy when i was 16 as a first car, but it was a flat head 6 three on the tree. whats left of it is sitting on kraal ter off washmill lake rd in clayton park. can see it in the fellas yard on satellite view(red with black roof). lots of road trips with it over the years. lost my winter storage for it and the salt air rotted the hell out of it

@joemaderak6449 Жыл бұрын

I am glad to see that you are not cutting the roof off or chopping it. A nice paint job and slight custom works for me.

@michaelbrookover8018 Жыл бұрын

Pretty cool you took the time to look at his collection! He was so excited to show you everything and you were not in a rush or frustrated, Classy 👍🏻😎

@daveanderson2865 Жыл бұрын

Sweet car. It looks like a car made for the drive ins.

@richardrussell500 Жыл бұрын

I owned a 1959 flatbed Dodge truck with a Poly 318, which had a stump puller transmission with 4.11 gears in the rear. Great engine. Stop speed was 55 mph. Just be advised that finding parts for that engine is hard to come by. Beautiful car.

@deandee8082 Жыл бұрын

you can tell this guy has worked hard to get what he has and tries to stay organized but has gotten to that too much stuff point time to lighten the load.. the where is it gremlin seems to appear out of nowhere, I'm in that same boat a lot as well, "now where did I put that" or "where is that" OMG... try to be as organized as possible, I've come to the conclusion its a matter of having too much stuff, doesn't matter how organized you are or how many cabinets or trays, chests, or containers, at some point its "where is that chest or container".. lol ... gorgeous car, pretty damn good deal, things must be a lot less on the island than in the lower 50, with exchange its a lil' over $5k usd.. you don't find good solid runners of any vintage year for that money here.. why can't I find something like that, that be my daily driver, serious, 1/2" larger exhaust with duals cats and 2 mufflers each side so you cant even tell it's running... straight sleds they are, comfort cars, modern tread and suspension they float down the motorways, fire up that tube radio... lucky

@ate-updesigns9186 Жыл бұрын

Could be really cool old car..something you don't see every day...im sure if chad gets her...he'll make it really nice...thanks for taking us along...see yas tomorrow

@rayhall3010 Жыл бұрын

Bad Chad please don't take this the wrong way , I'm from Alabama, I live here now,, when you visit Jim Bo and like on this video,, you Canadians , talk and do the same as us southerns ,, the only difference is the language, love you guys , I got to spend some time with your guys,, while in the military,, I'm excited for the next build ,, you are great and have proven it , I have every respect for you,,

@robertdehaes7572 Жыл бұрын

Looks pretty solid and it is rare, got to see price later.

@robmcqueary2482 Жыл бұрын

I love your videos and the way you make things work impressive 👍🏼 I also have a random question I have a distant cousin that used to own pharmacies in Nova Scotia called Macquarrie pharmacy was wondering if they still exist?

@FransvandenBergeMuziekschuur Жыл бұрын

I love those cars. Fixed right and shined up they make beautiful statements.

@highpeak9512 Жыл бұрын

Bad 🪖Chad and Queen 👑Jolene congratulations 🎉can’t wait to see what you do with it. Away from New Jersey USA

@tuat.mvpformallybigd.2635 Жыл бұрын

That guy was so thrilled when Chad said I think I'll do it. Lol he cranked it before Chad got there

@kimberlywilliams9757 Жыл бұрын

That's not a bad find! That car can definitely be made cool! Can't wait to see what you guys have in mind for it. (If you got it) Thanks for sharing! 👍

@johnblood3731 Жыл бұрын

Jolene does a great job recording. And the content is very interesting. Can not imagine how good this car will look when Chad works his magic.

@robertbragg9364 Жыл бұрын

That property is absolutely perfect, and this man seems to be very deserving of it. I love what you do, and I enjoy your videos a lot. Be safe and have a good one. 👍

@TheTreasureGuard Жыл бұрын

That Savoy is a treasure worth guarding

@trentmunn9486 Жыл бұрын

Love the respect you always show to Jolene.

@swain00420 Жыл бұрын

Get it Chad, can't wait to see what you come up with on this bad boy!! Excited to see new content after the truck conversion. 💪✌🤛

@johncarney482 Жыл бұрын

My grandmother had same year and it was black I was like eight years old (1965) and I found that you could open the cowl under dash to let in fresh air, I'm always interested in this car and year.

@donniepayton1460 2 ай бұрын

I enjoy watching you work on cars.

@bennys.8814 Жыл бұрын

Another great video thanks guys

@jjock3239 Жыл бұрын

That is a nice find. The tri-5 cars of the big three auto makers, are high among my favourite cars. I didn't like the 55 MOPARS so much, but I thought they made a big improvement in 56. I hope you enjoy the car.

@1575murray Жыл бұрын

The 1956 styling was definitely an improvement leading into the longer and wider 1957 models. All the big three automakers were going in the same direction while competing for market share. Unfortunately, Chrysler suffered later in the decade from poor quality control and body designs that tended to rust out prematurely especially in northern climates where a lot of salt was used to clear the roads in winter.

@jjock3239 Жыл бұрын

@@1575murray I'll second the quality control issues with MOPAR. A buddy of mine, had a 57 Plymouth 2dr Hdtp, and even though the car was only 4 years old, It leaked at the front windshield, and the rear as well.

@patcaza6166 Жыл бұрын

nice find, guys cant wait to see this project take shape !

@michaelamos2336 Жыл бұрын

Got to get the fender front fender mirrors for it

@hotrodray6802 Жыл бұрын

Those we're after market. Outside mirrors were not required in the USA until @63 and driver side only. I like those little street rod mirrors.

@mrcaps1971 Жыл бұрын

What a gorgeous car she is! Here in Australia, anything that old is considered desirable and would carry a price tag 4 times what they paid, and in far worse condition. Are Chad and Jolene still coming to Australia soon?

@anthonymurray8025 Жыл бұрын

I think you got a good deal on that car looks like it’s in pretty good shape

@glenbo2464 Жыл бұрын

Very cool and un common car and model ! Love it !

@Roddyontheblock Жыл бұрын

Enjoying this ride 😂great place great collection ! Nice classic car

@cannabisticannabisticino2718 Жыл бұрын

Nice car with tail fins, running engine and interior looks fine too. It will be a good project. Well done guys. 😎👍

@poorfesor Жыл бұрын

I had the Dodge version of this two door hardtop, great car even with the 326 engine. Honestly back in the day I never paid as much as a thousand dollars for any car, last car we bought was closer to Fifty thousand. Times do change.

@David-uu1oj Жыл бұрын

I really like that interior 👍

@jamesfitzgerald2361 Жыл бұрын

Alright Chad a DODGE fan I'm a mopar guy myself. I like the older ones. My brother restores older cars in Wisconsin. Really like your show keep up the good work you and Jolene. God Bless.

@patchadams4me Жыл бұрын

Awesome!

@felinebline7154 Жыл бұрын

What a super nice straight original car!!!

@kevinmcleod3741 Жыл бұрын

Alot of potential ! This would make a great project car ,, only if it's for the right price .

@Tootall72 Жыл бұрын

Nothing beats the old Plymoth script in the logo!

@randyphenicie4322 Жыл бұрын

Nice find!

@darylmorgan9887 Жыл бұрын

Nice looking car, cant wait for the next project.

@dirtykustomz Жыл бұрын

That’s sweet car love the two tone

@chrishambling1981 Жыл бұрын

Great score 👍 unique ,what Bad Chads all about cool stuff 😎

@kenmatthews6476 Жыл бұрын

I do love the dash of that old beast.

@wiserman100 Жыл бұрын

Nice score, and a 2 door too!

@roymazac2532 Жыл бұрын

Road trip. Thanks for sharing

@oldredchevy-hh6de Жыл бұрын

Some people might say, "what a shame to not restore it to stock". Little do they know how costly that would be. Many times what it would be worth after. These just are not valuable, high-demand cars. Note, that's why it's sitting around unrestored. At least Chad can be creative with it, while entertaining people, and doing what he enjoys.

@tjakr3869 Жыл бұрын

You are correct spend 20K on a 10k car

@deandee8082 Жыл бұрын

a guy chops that and he goes backwards in every term of the word..

@drrick8839 Жыл бұрын

What’s a correctly restored one worth! $10-12K, assuming it runs, stops and shifts right and has a paint job equal to factory as well as a full new interior? Throwing $12-15K in the fire pit is a lot less work! A lot of people think that a car has high value just because it’s old often get a rude awakening when they offer it for sale ,

@tjakr3869 Жыл бұрын

@@drrick8839 same when people sell their old cars. Old used cars are often overpriced. Whenever I consider purchasing a car I always ask, can I make money when/if I re-sell? The answer is more often no especially on old cars.

@kevinmcleod3741 Жыл бұрын

Yes I agree with that statement ! Doesn't matter what shape it's in other than new it's just not a collectable high end car !Thumbs-up on doing something creative with it .

@Tanman-lk1hk Жыл бұрын

Awesome find.. all in tact

@waltmarks9720 Жыл бұрын

Looks decent 👌 👍

@LoneWrencher Жыл бұрын

that extra engine would have been nice if you could have gotten a package deal

@scottdahl1938 Жыл бұрын

I loved the interior what I saw of it. The beast screams "Touch me Chad! Do me like you do, do,do! I want that voodoo that you do so well!" Maybe modernize the suspension and power train. But the body work and design will come to you. That wind was savage and the air compressor had to be brutal on Jolene.

@scottdahl1938 Жыл бұрын

@Dm_me_Nicegram_mr_Bad_Chad For some reason I don't think Chad would be soliciting me from Nicegram. Call it a hunch but I bet you do this to a lot of his subscribers.

@MrMechanicandy Жыл бұрын

The one they built on hot rod garage was pretty wild

@mitchelllavalley3497 10 ай бұрын

I had not seen this video and boys am I glad I did Not only because of the Plymouth your fixing but that amazing trike in that mans garage I been wanting to switch from the motorcycle I have, to a trike needing the extra support, not safely being able to 100% hold the bike up!

@lefistr Жыл бұрын

👍👍👍👍

@adriennefoley2906 Жыл бұрын

Love the dash ❤

@mikekelley5951 Жыл бұрын

Awesome 😎

@burthurt8365 Жыл бұрын

Great buy

@tuat.mvpformallybigd.2635 Жыл бұрын

What has he got in mind for this car? We'll have to wait and see.

@danielplummer6385 Жыл бұрын

A Plymouth Savoy will make a great project car, they are ugly and beautiful all at the same time. I love them and can't wait to see you get started on it! Great buy Chad & Jolene, I can see Chad is excited and so am I!

@charlesbrain3872 Жыл бұрын

Bloody stunning

@lloydosmondjr1 Жыл бұрын

Love the look of the old Plymouths and Dodges. Love the look of the front and rear of that Savoy.

@CaptainCurt07 Жыл бұрын

Cad is just cool dude love watching

@jumpinjojo Жыл бұрын

So is Chad.

@1944chevytruck Жыл бұрын

awesome!

@denisomeara6140 Жыл бұрын

318 Poly motors are awesome. I have two and they never failed to start. I think the 4 barrel intakes are making about $1200 in the states but you've got a twin 4 so that would be worked a lot more.

@moyadapne968 Жыл бұрын

Great engines, but not a '440' block, as you know. Probably 277 or 303 cu in.

@hotrodray6802 Жыл бұрын

Itza 277 at 180 HP. 318s didn't exist until 59 i think.

@hotrodray6802 Жыл бұрын

@@moyadapne968 It's the same block as the small hemi. The poly heads were cheaper to make and used on Plymouth and trucks.

@moyadapne968 Жыл бұрын

@@hotrodray6802 Google: 'The 277 "Hy-Fire" was the first A-block engine, produced for 1955 in the fall of 1954 and sharing almost nothing but the basic concepts with other engines built by Chrysler'. The A engine was first released in 1956 and was used exclusively in Plymouths until 1958 and in Chryslers and Dodges from 1959 on. NOTE: The Desoto and Dodge 270/315/325 poly was not related to the Plymouth Polys, using the same bottom end as the Dodge and Desoto Red Ram Hemi, but utilizing similar head architecture. Also NOTE: The A engine formed the design basis of its successor, the LA engine, evidenced in the many parts that interchange between the two engine families. * I will say, only the '62-on cranks could be used in LA's. 303 (I didn't mention 318 :) also available in '56 Plymouth. Not related to early hemi. The old hemi used a valley pan. I don't want a medal, but I've owned 48 Mopars, and rebuilt many polys from '56 thru '65. Hope this clarifies things. Paul. ps, my white '62 Dart h/top has a factory power pack 4bbl 318 poly.

@brianandglendaharkin9457 Жыл бұрын

There is the 313 poly an the 318 poly here in Australia to 1963 some guys do have parts for them. Top motors

@joebourque4860 Жыл бұрын

I have a 1955 Plymouth Savoy and enjoy the car not many people know what it is. Thanks for the video Jolene and chad

@jackiesena5536 Жыл бұрын

I like the tail fins on it, looks cool.

@dccheek7495 Жыл бұрын

That one will make one sweet old school ride

@keithruhl3545 Жыл бұрын

My Dad had a 56 Plymouth. I still remember sitting on my Mom's lap and pretending that I was driving the car by using the radio speaker grill to turn it with. Dad also had some blue lights in the centre part of the grill.

@brendonthompson1691 Жыл бұрын

Awsome score nice car

@barriecollins6838 Жыл бұрын

Well Chad and jolene another project to play with hopefully this one will be as cool as the last two you have done but saying that all you projects turn out cool hay .keep up the great work the both of you 👍 👏