Bad Corvette Camaro Trans Am Gen2 LT1 350 Teardown. Not The Problem I Was Told!

Рет қаралды 474,060

Жыл бұрын

Please visit www.Importapart.com and peruse our inventory including our complete parts cars! If you don't see what you're looking for, fill out our part request form or email us at Importapartsales@gmail.com
Today's teardown is a blast from my youth, a Gen2 LT1! Even though these engines have a bad reputation due to their strange ignition system and cooling system design, I still like them!
This core engine was bought from another salvage yard who noted it was "Locked up". I bought this for the heads and timing cover as this is an obd2 LT1 and the timing cover is often used for 24x LS pcm conversions. This teardown went pretty smoothly with one exception!
Why did I do this? My name is Eric and I own and run a full service auto salvage operation in the Saint Louis area. Part of our model is tearing down core or bad engines and salvaging the good parts. We don't rebuild engines but we supply parts to those that do!
As always, I love all the comments, feedback and even the criticism.
Catch you on the next one!
-Eric

Пікірлер: 1 200

@scottymoondogjakubin4766 Жыл бұрын

30 years later and most LT1's just needed oil changes and an ignition system upgrade !

@RayRayP2001 9 күн бұрын

Right take care of it and it will last.

@summersky77 Жыл бұрын

One of the major takeaways I get from these videos is that removing the dipstick is the toughest part of any teardown.

@Spike-sk7ql Жыл бұрын

Many times. Especially in the north. Rust builds up around the dipstick, and it's hell to get them out in the vehicle. I found using a small amount of heat makes them fall right out. MAP gas torch works perfectly. If you're gonna be putting it back together, don't forget to replace the O-ring.

@runner3033 Жыл бұрын

@@Spike-sk7ql I feel lucky, with the Gen II LT-1 I had apart, dipstick came out with little/no hassle.

@peterphillips1493 9 ай бұрын

Especially when the sludge is an inch thick inside the engine

@tomcraftdonkey2285 6 ай бұрын

Lol, I was doing an oil pan gasket on my car and it came right out.

@therealdojj Жыл бұрын

and i love the way you tried to remove that dipstick by attempting to take it by surprise, several times 🤣

@concernedcitizen780 Жыл бұрын

I’m surprised he didn’t pick it out with the fork loader……

@robertmarriott890 Жыл бұрын

You do such fantastic work I would have that shirt so badly dirty you couldn't use it for a rag

@liver.flush.maestro Жыл бұрын

@@concernedcitizen780 Yeah, I had the same comment 🙂

@kumakaroshi117 Жыл бұрын

Thats not just me who picked that up lol.

@XFolf Жыл бұрын

But when it works... its becomes hard to question the method.

@csgoscrub2456 Жыл бұрын

Hey I do cars I don't know if you'll see this but I still wanted to say it haha. A couple of years ago I got a dirt bike and ended up really liking working on motorcycles and cars and your channel has really helped me learn a lot about failures and really got me interested in motors in general. I'm only 16 and I now work at a Honda shop and get to build motors. Thanks for all the great videos.

@stevebot Жыл бұрын

Good job, stick with it. People that know how to do things with their hands and mind are in short supply. Watch some South Main Auto if you want to get into diagnostics, electrics or electronics aren't going away.

@jennifurzoe1302 Жыл бұрын

@@stevebot you said it, Scott at "Vehcor" is also good on body and removal,but this guy with the dry wit and innuendo humor.., awesome.

@csgoscrub2456 Жыл бұрын

@@iuyozx haha thanks a lot. I can't believe how much I like it it's definitely my thing. I also get to do a lot of Ski-Doos, side by sides, and quad stuff to. it's crazy how much there is to learn about diagnostics and repair!

@csgoscrub2456 Жыл бұрын

@@stevebot I'll definitely check him out. That is one thing I'm not super strong in yet. I have a basic understanding but it would be great to learn more. Thanks!

@csgoscrub2456 Жыл бұрын

@@jennifurzoe1302 I'll have to check him out!

@BCToby 5 ай бұрын

Hey the Optispark vent was added in the 95 and up camaro's. The high voltage optispark produced ozone which rapidly built up and massivly sped up any corrosion inside of the optisark. Venting it allowed for a steady stream of fresh air to cycle through preventing the buildup and was actually quite effective :)

@Jpilgrim30 9 ай бұрын

The optispark ignition is not near as bad as people make it out to be. It’s actually really precise as the high resolution sensor knows where the cam is to the degree. The biggest thing is to have the newer vented cap and rotor, make sure the vacuum hoses to it are good, and to keep water out of it by tapping a fitting into the weep hole of the water pump and putting a hose on it to route it away from the distributor. If you maintenance the cap and rotor like you should it should be sealed anyways. I think it got it’s bad rap due to people using cheap aftermarket opti’s that had cheap optical sensors instead of the reliable Mitsubishi sensor. The vent help a lot. It removed the ozone that built up from high voltage inside the cap and made them more durable.

@dustintreadway3731 3 ай бұрын

Ty !

@aaronroder6850 2 ай бұрын

You must be insane. Optijunk sits so low on the engine it will die in hard rain

@aaronroder6850 2 ай бұрын

I seen Mitsubishi sensors bad too

@metalted6128 11 ай бұрын

The LT1 was the high end, motor swap!! Back in the day,, A hot rod, with a LT1 was like WOW!! Great video!!

@mphilleo Жыл бұрын

I had a 1996 Buick Roadmaster with the LT1. Great car, true 3 row seating (took the whole office to lunch). Comfortable and plenty of power if you didn't mind 14 MPG city and 20-22 highway. Before I sold it to an older couple reminiscing about the Regan presidency, my wife and I took turns sitting in the rear-facing 3rd row while the other person floored it. Good times.

@riccocool Жыл бұрын

Haha. Nice recap.

@mphilleo Жыл бұрын

@@riccocool it's definitely one of the good memories. Although part of me wishes I kept it for hauling the kids.

@reubensandwich9249 Жыл бұрын

@@mphilleo I remember being 12 and sitting in one of those rear seats alongside my brother on a group trip to a baseball game. The kids in the car behind us thought it was fun to wave and we waved back.

@riccocool Жыл бұрын

@@mphilleo I bought an all original 67 country squire to haul the kids around.

@danwake4431 Жыл бұрын

The Roadmaster also had a roller cam LT1, the only model to get that. What's ironic is todays turbo 4 bangers can barely beat that MPG.

@AkioWasRight Жыл бұрын

My 94 Firebird Formula is long gone, but I still have her oil soaked all over my garage floor to remember her by.

@TribbleBot Жыл бұрын

My '95 Caprice leaked from the oil filter adapter, about a quart every 600 miles. I never changed the oil in it because I figured it was already getting five new quarts every 3000 miles.

@minimanadam Жыл бұрын

Imo , best sounding engine ever. I had one hopped to lt4 with hot cam n bolt ons. Only car I ever lost control of and I was going strait...lol

@fantasma5764 Жыл бұрын

Yessirrr I love one of these in my z28 with only 60k miles. Runs like a champ.

@keithwalton Жыл бұрын

Love the way he tries to sneak up on the dipstick, as if that'll help get it out sooner.

@chuckpeckham9148 Жыл бұрын

Now that is so funny. The great dipstick challenge.

@samholdsworth420 Жыл бұрын

Worth a shot

@arc00ta Жыл бұрын

The commentary killed me "its coming! Its coming! its not coming any more!"

@damonhenry Жыл бұрын

Lt1s are beasts. Crazy torque

@johnfranklin5277 Жыл бұрын

I have a 94 Trans Am I bought brand new.Fully loaded, leather, every thing except T tops, my 79 TA had those, loved having them off, but after a few years, they started leaking.....It was my daily till 2005. Ive now had 5 new cars since, but the TA IS A KEEPER. It has 338.000 plus miles now. The engine has never been touched. Even the timing chain is original. It runs and sounds like new. Uses no oil between changes, and those have been every 3000 miles since new. Castrol GTX. Never had synthetic in it. Lifelong Southern California car. Its had 2 new water pumps, 2 new radiators, and 3 new optisparks. It still looks great in and out, and has NEVER FAILED California emissions test which is unbelievable, as its a difficult test to pass...treadmill, test rod up the tail pipe...yeah, I love my old Trans Am. They weren't cheap, mine cost about 42.000 in today's money.

@ronskopitz2360 Жыл бұрын

I had a ‘93 Trans Am and in ‘94 I ordered a T/A convertible with a 6 speed (young and stupid :) LOVED those LT-1s, especially with the manual behind it. A total blast!!

@nthgth 3 ай бұрын

Had a '95 manual Z28 coupe, and HELL yeah that thing was fun! First manual too, the thing survived as I taught myself heel toeing, push starting, rev matching etc. Also first RWD car! 😄 Also young and dumb - a miracle that I never crashed it! Except into a curb, needed a new wheel. I don't miss the electrical problems but man what a blast that thing was to drive.

@lutomson3496 3 ай бұрын

In 1976 I ordered a new 1977 TA Bandit Edition new drove it for a couple years and then stupidly traded it in for the 10 year anv model in 1979...back in the day they werent worth much just like the black ford SWB trucks in 1980 and 81 when Urban Cowboy came out everybody had to have one especially the short guys always laughed as they were lifted so high they had a hard time getting in and out..culture changes with each generation and Ive been through hundreds of cars

@biyouco 8 ай бұрын

I’ve been sick in bed for 3 days and I think I kept a part of my sanity by watching your vids. You have the best job.

@danhansen1454 Жыл бұрын

I was a fuel systems engineer for Rochester Products div of GM (now Delphi) back in the day when we were making the transition from carburetors into fuel injection. The reason trucks didn't get multiport systems is because they were slated to get the dreaded CPI/SCPI (aka Spider) systems. They had the injectors in a central location in the intake manifold, with tubes running to poppet nozzles near the intake valves. GM loved the idea because it eliminated the need for a unique (and expensive) fuel rails. All they had to do was change tubing lengths for each application. Unfortunately, the system performed poorly and GM had enormous warranty costs on them. So trucks went to conventional multiport systems in 2000 with the Multec II injector.

@paulmryglod4802 10 ай бұрын

I have a 1998 5.7 1500 van. Any tips for keeping the spider injection in good condition?

@watup110875 5 ай бұрын

@@paulmryglod4802 Yelp, don't own ROFLMOAO

@paulmryglod4802 5 ай бұрын

@watup110875 hahaha alright alright

@nthgth 3 ай бұрын

I thought they just used throttle body injection and then went straight to multiport when they updated it to the Vortec 5700. I got some research to do.

@gillboardman8998 Жыл бұрын

Opti-sparks are not vented for cooling, it's to remove the ozone that builds up inside and destroys the innards. I took my 94 Roadmaster Wagon 3000 miles this summer from Eastern Washington to Amarillo, Texas and back for a tranny rebuild and it never missed a beat. 22 mpg at 75 mph. I've got a good one.👍

@ricardofierro7041 9 ай бұрын

Why would you drive 3000 miles for a transmission rebuild ? Thanks

@ThelMoram 5 ай бұрын

probably went to precision transmission, they have a youtube channel but have since quit doing videos.

@gillboardman8998 5 ай бұрын

😎👍

@nthgth 3 ай бұрын

That's about the same MPG as my turbo 4 at that speed lol I firmly believe Subaru should've just put GM V-8s in the STI, it would be a better car in every way

@nathanwolter1519 Жыл бұрын

My favorite thing about Saturday night. Watching you rip engines apart. Always in suspense to see those beautiful chains.

@BlackRam17 Жыл бұрын

Let’s not forget the reverse flow cooling that allowed for higher compression

@THEFALLOFSONY Жыл бұрын

For its time the LT1 was an unbeatable engine in power and reliability until it’s LS replacement.

@nowayjose596 Жыл бұрын

I'm old enough to really wish that GM would've picked a different designation for the Gen Vs than LT

@actschp1 Жыл бұрын

I am betting that the reason they thought it was locked up is because it was hydro locked. After sitting for awhile, it just bled down the cylinder walls into the crankcase.

@davidpowell3347 Жыл бұрын

Also might have happened while at idle so didn't do catastrophic damage

@BuzzLOLOL Жыл бұрын

My thoughts also...

@BuzzLOLOL Жыл бұрын

@@davidpowell3347 - Probably couldn't get it to turn over and start...

@scottd7222 5 ай бұрын

If its hydrolocked whats the course of action?

@Chainmailws6 Жыл бұрын

There's a coil pack ignition system available for this now from Torqhead that converts it to the LS PCM. It's a little pricey but you can install an electric water pump so that it can no longer leak from the weep hole onto the distributor. I still have the optispark on mine and it's really not bad as long as nothing gets into it. Once you get past those issues it's a great engine.

@YungEagle3k Жыл бұрын

Why would you spend that much to convert to coils. Might as well get a used ls

@Chainmailws6 Жыл бұрын

@@YungEagle3k I didn't buy the Torqhead for my own car because of the price but converting an LT car to LS is still a lot more expensive and a lot more work.

@claytonjones006 Жыл бұрын

Thanks for doing one of these LT1 engines. I was in high school and my first muscle car was a 95 convertible formula firebird. Worked part time in school to pay for it. I wrenched on that thing for all sorts of things like the opti-spark, water pump (funny how I had to do those at the same time), and intake manifold gaskets. Loved that car, and put 172,000 miles on that engine / car before selling it. The 4L60e had to be rebuilt a few times, but that engine survived a lot of long miles and still had great oil pressure and no knock. Still pulled strong when I sold.

@jeffrykopis5468 10 ай бұрын

"the 4L60E had to be rebuilt a few times". Once would be enough for me. Sometimes ya gotta know when to walk away, kid.

@C4VETTELT1 9 ай бұрын

@jeffrykopis5468 transmissions go out!! It's just the way it is!! Especially in something that gets hotrodded on a regular basis!! Transmission rebuilt is no reason (at least for a real car guy) to get rid of your baby/pride and joy!!! You are the type of person to give up on whatever your doing and just sell said object instead of tackling the problem head on and conquering said problem!!!

@nthgth 3 ай бұрын

I had a 95 Z28, but with the manual. Now I don't hate automatics (frankly, a V-8 sounds its absolute best with good old automatic upshifts with relatively wide ratio spacing like the 4L60e). But the BorgWarner T-56 took everything I threw at it, including being my first manual car and me teaching myself techniques like rev match downshifts and push starting. Worked like a champ till rust took the car from me at 145k miles 😢

@erniesdeck7550 Жыл бұрын

My daily driver is a 95 Trans am 6spd with this engine except OBD1. It just hit 100,000 And still runs like new. I purchased it with 80,000 previous owner changed the oil every 3,000 since the car was new and I've done the same since I have had it. I pop the hood every couple days make sure the water pump isn't leaking. Take care of your car it will take care of you.

@nthgth 3 ай бұрын

Awesome car for sure. I had a 6spd Z28, also 1995. Never had an Opti problem, but other electrical things were problematic (blower motor and window regulators). That T-56 was indestructible and a joy to shift. Hope the Trans Am gives you many more years of awesomeness! Love those pop-up headlights too

@adamtrombino106 Жыл бұрын

Funny how the roller lifters in those old LT's lasted forever, but nowdays, they can't hold together regardless of better oils etc.

@davidpowell3347 Жыл бұрын

The oils might not really be better,just more catalytic converter friendly. (Less antiwear additive?)

@Bill-sp8kb Жыл бұрын

I'm sure they use cheaper steel alloys, too.

@johnpopoff7950 7 ай бұрын

The cylinder cancelation system causes lifter failure. I know someone who had a Silverado with the 5.3 and the lifters went out at 60k miles. If the truck is driven in manual mode it will lock out the cylinder deactivation.

@rudimerm7686 Жыл бұрын

Your introduction was great! You cleared up the confusion to the old timers and the youngsters. The 90s LT1 was great for its time, especially when compared to the previous L98.

@johnpopoff7950 7 ай бұрын

L-98 just needed better breathing heads.

@rudimerm7686 7 ай бұрын

@@johnpopoff7950 It was also the L98's factory intake, which had long runners that were great for torque, but made the engine fall flat after 4,500 rpm. The Lingenfelter/Accel Superram intake brought the L98 to life (took the motor to an entirely different level). It boosted horsepower by 30-40 hp, but improved the entire powerband all the way trough to 7,000 rpm. Then you had the super rare SLP intake, which was on the legendary 1991 Firehawk.

@nthgth 3 ай бұрын

@@rudimerm7686Sounds like that Superram intake pretty much brought the L98 to LT1 power levels in one fell swoop. (Without reverse-flow cooling too!) Since it doesn't use the long-runner design of the stock one, I imagine it makes it somewhat less torquey down low? Not that it's not worth it.

@rudimerm7686 3 ай бұрын

@@nthgth *You know your stuff.* If I remember correctly, the Superram runner length was 7", so peak torque would not be compromised. As you said, low end torque was slightly compromised.

@jordanjohnanderson Жыл бұрын

These were the cool engine when I was a kid in the 90s. I remember looking to see if a Caprice or Roadmaster had dual exhaust. Then you'd know it had the LT1. It's funny, these LT1s came out in 1992; 22 years after the first generation debuted in 1970. And the 3rd generation came out in 2014; 22 years after this one.

@johnstreet797 Жыл бұрын

You young whippersnapper! My buddy and I stuffed a 425 HP 409 in his 60 Chevy Belair 2 door. It had staggered dual quads and a chrome air cleaner. The top looked like a shiny garbage can lid. It was fun to suck the doors off a 389 GTO.

@jeffrykopis5468 10 ай бұрын

The 2036 version will have batteries. But it'll be fast.

@jeffrykopis5468 10 ай бұрын

@@johnstreet797It's fun to see those flexy-flyer X frame cars twist up like a pretzel at the drags.

@jordanjohnanderson 10 ай бұрын

@@johnstreet797 My dad has a 389 Tri-power goat. That sounds like it was a cool unit. When I win the lottery and can buy acreage for car, I'd really like to get into those 1st gen Chevy big blocks. They're still something of a mystery to me.

@jordanjohnanderson 10 ай бұрын

@@jeffrykopis5468 But it will be gay. With 4 doors, no less.

@jasonyama1082 Жыл бұрын

So glad your including the parts washer in the videos, it so satisfying

@austincjett Жыл бұрын

I was a son of a mechanic. In other words, I was the sludge scraper and the parts washer.

@sethbybee4748 Жыл бұрын

My 95 Trans Am has had many ignition problems. I’ve replaced the water pump 3 times and the optispark 2 times in 5 years of ownership. Ohhh, General Motors and their infinite wisdom

@therealdojj Жыл бұрын

in a surprise coincidence, alex from legit street cars was hunting down an ignition fault on his lt1 in a video he dropped today

@jeremybinegar Жыл бұрын

First thing I though of when I saw this video

@davehawk2130 Жыл бұрын

I had just finished Alex's video when this popped up. It is an LT1 kind of night. Takes me back to the good ol days!!

@mbsnyderc Жыл бұрын

His looks brand new inside this one not so much.

@jamesk3565 Жыл бұрын

Thinking the same thing😂

@thebasherdude__473 Жыл бұрын

Same thoughts 💭

@agenericaccount3935 Жыл бұрын

Looks like a sad little droid. The throttle bodies the eyes, the water pump the front armor. 🤖

@beyond_the_infinite2098 Жыл бұрын

I put 115K on my 97 Z28 before I swapped it for a crate engine. The stock engine always started immediately, idled smoothly, no smoke, passed CA smog, revved good and ran strong. Never had a problem with the opti-spark. I provided a new opti-spark to Golen for my 383 crate engine (460hp/440 ft lbs) and I have had no problems tracking the car. Redline 6,500. Fuel cut off at 7,000 rpm.

@rayward3835 6 ай бұрын

One of your best videos for me. I was about to pull a trigger on a 1996 Corvette and from you tear down, my mind has changed.

@nthgth 3 ай бұрын

If it was a manual, that Corvette had the rare LT4 engine. Fantastic and coveted engine, but I'm not sure it avoided all the pitfalls of the LT1.

@dopefrancis1791 Жыл бұрын

12v vr6 teardown plz! Such a unique engine Id love to see it apart if you can find one.

@paulwatson1507 Жыл бұрын

I have a 1956 Nomad. I bought a 94 Camaro z car with a lt1 and a t56 at a local auction that had smacked a wall. I went through the engine and replaced the water pump with new GM. Eliminated the air pump, egr and added headers. Even on a hot day with the a/c on, it runs cool as can be. I upgraded the optispark and vented it using the original fuel vent solenoid. It’s a great hot rod and fun to drive.

@Bill-sp8kb Жыл бұрын

I'll bet that Nomad goes like a streak!

@paulwatson1507 Ай бұрын

@@joemomma8905 yes, I sent it out to have those features turned off. I found the guy on the internet. That year computer can be easily modified as there is no downstream o2 sensor, just upstream.

@paulwatson1507 Ай бұрын

@@joemomma8905 yes, I sent it out to have those things turned off.

@Adamz678 Жыл бұрын

Even out of the car, on an engine stand, the thing is a pain in the ass to work on. Classic 90s American Automotive engineering.

@l00k4tstuff Жыл бұрын

I always loved the GM 350. What a workhorse of an engine. Each division had their variant, but they were all solid engines.

@stuckinthe60s69 Жыл бұрын

Excellent. My 48 Ford hotrod (built in the 90s) has a 1994 vintage LT1 350. Fortunately, it still runs very strong.

@nicotoscani8270 Жыл бұрын

That optispark looks original and does have value. One way to make sure is open it and look for the Mitsubishi logo on the sensor.

@nickwells20 Жыл бұрын

Your comedy is subtle and sarcastic with some good movie references...bravo good Sir

@hankwilliams4024 Жыл бұрын

Stripped one down and converted to carb with the NoS GM intake. It’s actually going in my C10 truck! Was a great score for $150. The accessory bracket is worth that!

@williamfaulk 11 ай бұрын

Look into Advanced Induction or Loyd Elliot.

@jeffrykopis5468 10 ай бұрын

"NOS GM intake"? There was a GM 4 bl CARB intake for these?

@hankwilliams4024 10 ай бұрын

@@jeffrykopis5468 yeah, I believe summit and jegs still have some. It lets you run a regular HEI style gm distributor and a 4 barrel spread bore carb. Part number 24502592.

@infosneakr Жыл бұрын

Even though the prior person who worked on it used the wrong sealant on the water pump, they had the correct reasoning behind it. They were trying to make sure there were no leaks on to the optispark system . Their heart was in the right place.

@Jeffcvt Жыл бұрын

Great teardown as always. I'm more of a carpenter than a mechanic myself so it's always fun to see a disassembly of an engine since it's not something I really get into myself. (And the knowledge will for sure help if I ever do tear into one) I will suggest though that if your cordless ratchet and impact seem to be a little... lacking in power, replace them sooner rather later. Last time I replaced one of my well used impacts, it was like night and day. For sure made a huge difference in my workflow, and time is money. Plus Christmas tool sales are going strong at this point. Buy now, save a buck, and hold onto the old ones as backups/extras. Better than buying them only once they die, because you know if you do that they aren't gonna be on sale. (Plus they'll die at the worst possible time too.)

@timlee4204 5 ай бұрын

My air operated ratchet started going stupid and I found that a small spring loaded ball had worn flat, fished through my junk collection and replaced the ball, worked fine. Ted from down under.

@rebeccarobinson7024 Жыл бұрын

Ya had a 95 gmc z71 with 400k miles on it original 350 tbi my buddy has it now and he says it still going strong starts up every time like it was new still no smoking oil leaks etc

@ACobra289 Жыл бұрын

I've got a 95 Trans Am with 160k miles. I'm on the 3rd water pump, but I've been lucky to still have the original opti.

@toomanyhobbies2011 Жыл бұрын

Have had a few small blocks with creamy oil from blown head gaskets. Cleaned them up with ATF and some green Scotchbrite pads, and they ran like a champ. The last one was in an '89 K1500 with a leaking cooling jacket bolt hole. Cost all of $30 to fix that one and it's still running strong.

@jimilopex76 Жыл бұрын

Question... What is ATF? Thanks 😎👍🏼🏁🌎🇺🇲

@buckeyfan7623 Жыл бұрын

@@jimilopex76 Automatic transmission fluid

@MikeL-FL Жыл бұрын

I had one of these in a 96 T/A, somewhat built. The Opticrap killed it. I wish somebody made an OptiEliminator back then, because IMO, the 93-97 F-Bodys were the best looking ones..

@imtheonevanhalen1557 Жыл бұрын

You can see the distributor drive is still there for the oil pump.....I bet someone makes a kit.

@MikeL-FL Жыл бұрын

@@imtheonevanhalen1557 Now they do. A couple of companies have kits to use the LS1 coils. 25 years ago, there was nothing except an extremely complicated and expensive conversion from Electromotive.

@shadowopsairman1583 Жыл бұрын

93-2002

@MikeL-FL Жыл бұрын

@@shadowopsairman1583 The front ends were redone in 98. I’m not thrilled with the 98-02. The Camaros look like a fish and the Firebirds lost their sleekness and look like normal cars with headlight covers.

@peted5217 Жыл бұрын

Always put a new Delco in when job created access. New wires , Plugs , Coil too. Good preventative maintenance on nitemare design. Optispark was attempt to improve timing and EFI accuracy , which it did almost as good as crank/cam trigger does these days

@dustinkennemer5033 Жыл бұрын

Great video! I drove an LT1 for over 150K miles, more than10 years (Chevy Caprice). The interior and transmission fell apart, but the LT1 kept humming a glorious sound. I still dream about it

@SteelyEyedH 2 ай бұрын

Honestly. The editing is one of my favourite things about this video 🎉

@shakenfake Жыл бұрын

Hey I got an LT1! 1996 Impala SS, just put on some headers and replaced the intake manifold gasket and valve cover gaskets.

@ryanbrown918 Жыл бұрын

These engines always ran so hot. 90's LT motors were okay for the time, but man did the LS improve upon that design.

@junkmangeorge6363 Жыл бұрын

Chev engines took a dump with the high temperature thermostats required to meet emissions, until completely re-designed with the LS.

@WilmaTell Жыл бұрын

But my stock LT1 still smoke an LS1. Imagine that?

@miatalife94 10 ай бұрын

@@WilmaTellhad a LS2 powered car, that ran hot as shit, now I have a 94 Z28 I bought after it sat in a field for 6 years, dropped the tank cleaned with new fuel pump...... it'll probably run the LS2 car close, these LT1s are no bullshit

@WilmaTell 10 ай бұрын

@@miatalife94 If they're both 6 speed manual transmissions it all comes down to the driver. If you hit every gear and don't spin it that's all it takes. LT1s are more aerodynamic and lower to the ground.

@alejandromota8846 9 ай бұрын

@@WilmaTellthey sure did I drove a 94 fleetwood Lt1 big as car and still beat plenty of ls I raced a hell I raced a 300 with a hemi and kicked his ass

@napoleontheclown Жыл бұрын

When I saw the signs of coolant in the intake ports my immediate thought was "headgaskets".

@johnelliott7375 Жыл бұрын

The one I stuck in a little Old Vega, added a good 4speex and she was a great runner! She would EAT what car you wanted to line with it.

@inothome Жыл бұрын

Wow, such a genius idea to bury the cap and rotor like that. Those parts never need replacing. Must be the same engineering team that decided it was a stellar idea to put the starter in the engine valley. Because like all electrical parts, they last the life of the engine!! Kudos to GM. eyeroll That cam driven water pump is awesome too. Because, belts are hard. No one "gots" time for belts. LMAO

@miatalife94 11 ай бұрын

you should see the genius engineering behind the gas tank on the Camaro this this engine came in lol, I did it the hard way without cutting a hole, total pain in the ass

@jeffrykopis5468 10 ай бұрын

🤣🤣🤣

@Someguy6571 7 ай бұрын

@@miatalife94I mean its fine for me I am planning on doing my 97 trans am fuel pump. However while I am under the car with everything out of the way I plan on cleaning and painting all the underside. It's honestly worth it to pull the tank on these cars now if you got a nice one without any rot. You can clean and paint anything that might have a bit of rust starting to form.

@charleslaatz6189 Жыл бұрын

If you ever get the same motor twice but with different issues you should make another video. I don't think I've seen many duplicate engine videos on your channel but I think many viewers enjoy seeing different damage even if you are taking apart the same engine.

@arr4512 Жыл бұрын

I'm in the process of tuning one of these engines right now. I got it for free "ran when pulled"... Right. Turns out all the rod bearings were spun. So I stroked it and bumped the compression up to 11.4:1 (perfect on the reverse cooling of these engines). I did an electric water pump, and carb swapped it. Dropped it in my 1980 Camaro. It's a sweet motor now! Thanks for the tear down video. it was cool seeing one with everything still all over it. Mine came mostly stripped down.

@steveosgood9182 Жыл бұрын

I have a copious amount of love for this channel

@craigtegeler4677 Жыл бұрын

@I Do Cars, The best LT1 that I liked was in the 1996 and a half Police Interceptor package! They were employed in the Caprice; upside down bathtub cruisers. Those engines were rated 350 cu. in. at 350 HP Hi Output model. Those cars would launch like no other and as I've been told are very similar to the Impala SS. They also acted like they had acted like they had an inexhaustible top end! Boy, I could tell you so stories!!

@fillupread Жыл бұрын

I was a tech at a Chevy store when this motor was in production. This was around the time GM was trying to make less waste by implementing 100K mile service procedures, Oil life monitoring system, Dexcool, long life plugs and the Opti-spark. Some systems worked better than others. The Opti-spark was a growing pain between standard distributors and coil on plug OBDII systems. The SS Camaro was likely the worst tune up because of the plug access. It was easier if you used an engine drop table and lowered the motor out of the car 3-4 inches. I do recall, late 90's, most of the full Opti-spark tune ups cost about $1,000 which pissed a lot of people off but the Opti-spark distributor alone was over $400 for the part back then and I think labor time was around 6 hours.

@jonathanlawson4667 Жыл бұрын

Contrary to what shadetree mechanics say the optispark system was a very good system all around... The LT1 was GMs most powerful production small block as well..

@johnfranklin5277 Жыл бұрын

Optispark replacement at the dealership always ran around 500 bucks for me. I got around 100.000 miles on each one...

@danwake4431 Жыл бұрын

@@jonathanlawson4667 all those police cars and taxis used that system, as long as the WP didn't leak it worked well.

@briantruck2284 Жыл бұрын

Wow

@timothyroatenberry1274 Жыл бұрын

Agreed 100% brother, I'd take a LT before a LS any day !

@JohnnyAFG81 Жыл бұрын

Always wanted to see one torn down. My neighbor had a Roadmaster and that thing would lift the nose on full pedal to the floor.

@rcflightz2058 11 ай бұрын

Really enjoy your content! Great stuff. The time has come…I have a request. Can you tear down a L98 80’s Corvette/Camaro engine. It’s old school small block meets modern technology. MANY of us have these engines! Keep doing what you do, look forward to your future content.

@robertbryant7771 Жыл бұрын

That splined coupler for the water pump does NOT come with a new pump and it’s potentially quite valuable to someone who needs it. And totally agree the Opti can be sold for refurbishing. Almost every version of it sold today is vastly inferior to the original spline drive and pin drive Optis from AC Delco.

@zakburnett6690 Жыл бұрын

The oil dipstick would come.... Out better if you gave it the ol' classic reach around 😂

@williamnolting9697 Жыл бұрын

I said beat that dipstick off lol

@jellydonut360 Жыл бұрын

Would it come then?

@timothyroatenberry1274 Жыл бұрын

😂👍✌

@dennisgoans701 8 ай бұрын

Just can't get enough of these tear downs. Keep up the good work.

@jeffbrennan1123 Жыл бұрын

I always enjoy watching you fighting with the dipstick tube. Something so simple can be so challenging to take out.

@TechGorilla1987 Жыл бұрын

@24:44 - RTV should be applied like you would apply heat sink compound to a processor. Very even and very thin. You're trying to fill slight microscopic imperfections, not stack the Hoover Dam!

@stevebot Жыл бұрын

The new waterpump was a sign, the new coolant sensor in the left head sealed the deal, the post mortem was exactly what I expected after seeing those. I didn't realize those were 2 bolt main blocks. Pretty strange when you consider the power output and that a Roadmaster or Caprice wagon full of two legged beef, luggage and towing a trailer is getting into truck territory for GCVW.

@danielknepper6884 Жыл бұрын

I think the lt4s were four-bolt Main

@CaptainSpadaro Жыл бұрын

Corvettes got 4-bolt blocks, the F-, B-, and D-bodies used 2-bolt blocks.

@mrlt1 Жыл бұрын

All the Camaro, firebird and Corvette LT1s had aluminum heads. Ironheads came on the Impala and Caprice engines LT1 or l99 variants. As for the opti I feel like it's much more maligned than it should be. I've ran into issues with other random sensors Ie coolant temp sensor causing symptoms that mimicked a failing opti. I do remember hearing about these engines liking to munch bearings but that almost was always a case of running the engine too hard when it was cold. I had an iron head LT1 from a 95 Caprice police car that I beat the hell out of for 15 years in my 82 Camaro and before I pulled it it was running just as strong as it ever did. This is after countless dyno pulls, street and track passes.

@RANDOMNATION907 Жыл бұрын

I cannot find an '82-'85 Oldsmobile Diesel LF9 , anywhere. At least not a 'complete' one. I really want to get one for my Jeep.

@darylmorse Жыл бұрын

Really enjoyed this video. I've never seen inside one of these engines. I can see why they aren't on the list of the top 10 best small block Chevrolet engines. GM started with a bottom of the barrel 350 (single bolt mains, cast crank, cast rods and cast pistons), then they "improved" it with the horrible water pump drive, ignition system, intake manifold and fuel injection system. The only redeeming feature of this engine is the aluminum heads. But they aren't really that much of a big deal, considering the aftermarket alternatives that are available now. The engine is in surprisingly good condition, considering that it had two blown head gaskets. Thanks again for sharing this video.

@hydrocarbon8272 Жыл бұрын

My parents had a 94 Formula (car I learned to drive lol) and it was reliable AF besides needing 2 starters replaced. IIRc they sold it after 100k. The optispark was no problem, and 'experts' generally attribute it's probs to leaking pumps (dexcool) and then inferior replacements. Make no mistake, it was a problem - but more from a bad pump configuration and a not-quite-sealed ignition. The LS definitely improved on this. That Formula was replaced with an 02 WS6 and has had zero failures...besides a lifter tick lol.

@nthgth 3 ай бұрын

Your parents are freakin awesome

@sstevocamaro 7 ай бұрын

One of my favorite engines. It actually holds the GM 6spd manual record in a ‘97 Camaro. 6.61 @217mph in the 1/4. 2500hp.. No LS can touch it so far. Facts.

@DragoonWarrior790 9 ай бұрын

I still drive a 1996 Corvette with one of these in it. The valve rockers look slightly different. Not sure why. Still fun to drive around. I have a lifter on the #2 cylinder that's starting to wear out. Going to be my next fix with the digital display after that. Just hit 100k miles a few weeks ago. Thanks for the great videos.

@josephbrownjr3564 Жыл бұрын

My 1996 LT4 made 415hp. It had different heads, cam, rocker ratio, slightly different intake with bigger injectors and throttle body

@cali2468 Жыл бұрын

Lloyd Elliot or Advanced Induction?

@josephbrownjr3564 Жыл бұрын

@@cali2468 factory optioned and installed but, it’s more commonly known as the LT4 high performance kit with the LT4 “hot” cam and big valve and big port heads. It was also available through the dealership as a GM Performance kit. I made a mistake on the year, it was a 1997 anniversary Z28 that I bought in 1996. But included in the LT4 package were better heads, a red intake that was ported and port matched with the throttle body opening enlarged to accommodate a 1000 CFM t-body, 30# injectors, the t-body, 1.65 rockers, shorty headers, a bigger cam and the ecu tuned. With a K&N cone filter, high flow cat and flowmaster exhaust system, I put down 415hp at the tires. It was supposed to be 420hp at the engine but it was severely underrated. I hope this was helpful. Oh and with BFG drag radials and it was a 6 speed, I ran consistent 11.40’s at 120 in the quarter

@nthgth 3 ай бұрын

@@josephbrownjr3564holy crap, my dream car right there

@stockholm2375 Жыл бұрын

On the 3800s you also need to pull the oil level sensor before taking off the pan...I found that out the hard way after breaking mine. Bit of a silly thing really.

@slikrhodez3336 Жыл бұрын

Just put a Jasper rebuilt Corvette LT1 (with four-bolt main bearing caps) in my 95 Camaro Z28! The dipstick tube came out a lot easier on mine! ;-) Thanks for posting!

@mdubz101 Жыл бұрын

Had a a similar 5.7 350 tuned port injection GTA! Car did 155-160. Had to hold er in D well into redline, then shift to OD. Otherwise it would keep shifting up and down around 125, and quit pulling. Car was a ball. Crushed all my buddies 5.0’s! Great vid!

@hybridcraft3077 Жыл бұрын

Have a 95 formula and it’s nice to see some new videos on the old LT1 while I restore it… every bit helps

@Mis73rRand0m Жыл бұрын

My ratchet (same model) was dying; I took it apart and found nothing wrong, put some grease in there and it's been good since!

@fascistpedant758 Жыл бұрын

Try blowing in the dipstick tube while pulling on it. It'll come right out.

@The_R-n-I_Guy Жыл бұрын

I've been waiting for a 2nd gen small block LT1. I've done a lot of work on my 96 Roadmaster but I've never seen inside the engine. It's got over 170k miles on the original Optispark and I had a water pump go out around 140k miles and soaked it. I dried everything up as good as I could, put the new water pump on and haven't had a problem yet. Although I'm very aware that I need to rebuild the Optispark soon.

@michaelhicks8343 Жыл бұрын

I would love you see do a teardown on a GM 8.1L (496). If you thought the 454 was big, this is it's big brother lol

@1JackTorS Жыл бұрын

There was a copious amount of the word copious in this video.

@billyj.williams2341 Жыл бұрын

These were great performing engines in their day.... way stronger than the L98 it replaced. Ended the reign of the 5.0L Mustang and the subsequent 4.6 Mod motor was always in the rearview. The GEN2 LTX had a short production life from 92-97 because GM just needed a stop gap to get them to the GEN3 LS. A lot of the stuff with them never made sense to me... the reverse cooling and optispark.... all that did was make major components incompatible with the previous SBC and introduced unreliability in the ignition system.

@mercedes-amgforlife3237 Жыл бұрын

The reverse cooling was about emissions and performance. Smokey Yunick talked about it, and some race teams tried it. I believe Oldsmobile or Buick tried it back in the 50's but cost of production was to high. The 92 Corvette was the first production car to utilize it. The theory behind it was to cool the hotest part of the engine, i.e. the combustion chamber so that higher compression(10.4:1 LT1 and 10.6:1 LT4) could be used. Also it allowed the block to warm up faster so that cold start emissions were reduced, and also longer block life as cold shock(cold coolant entering the block when the t-stat is initially opened) would be heavily avoided.

@headhoncho4890 Жыл бұрын

I remember when this came out too and ran past 5.0 mustangs . It changed street racing

@briantruck2284 Жыл бұрын

Dry intake

@buckeyfan7623 Жыл бұрын

@@headhoncho4890 oh yes I remember racing a mid 90’s GT at the 1/4 mile track at rockingham NC on night with my mostly stock 96 z28 automatic I put a city block or more on him lol. He wasn’t stock either he had off road exhaust and drag tires.

@nthgth 3 ай бұрын

I like Mustangs too, but idk what Ford was smoking when they put the anemic 4.6 into it when it had the LT1 to deal with. (and did they know the LS1 was right around the corner?)

@starckmad1779 Жыл бұрын

Just had a full moon. The nuts DO come out before the studs!

@ahnafzahid9450 Жыл бұрын

the way u removed the dipstick was EPIC😂😂

@veil67 Жыл бұрын

The Dipstick moment , proudly sponsored and presented by GM Motors 😂

@gidderman Жыл бұрын

the LS based engines that followed the SBC and LT engines were soo much simpler in terms of wiring and hoses... lol Funny how the cycle is repaeting now though and engines are becoming a mess of wiring and hoses again...

@PassionFlakey2 Жыл бұрын

"Universal Engine Fluid" - Everything an engine needs all-in-one.

@MrSpartanPaul Жыл бұрын

My LT1 has 340,000 miles and runs perfectly. Tons of power too.

@RedfishCarolina Жыл бұрын

The trucks from 96 up had the L31 Vortec which was nearly as powerful in terms of hp and lacked the wretched optispark, but traded that for bad intake gaskets that leak coolant into the valley, and easily cracked iron cylinder heads

@aaronshelton84 Жыл бұрын

That big aluminum accessory bracket is worth a few bucks, and the exhaust manifolds are popular with stock class dirt track racers. Good to see one of these on the channel

@rotaxtwin Жыл бұрын

Are they reasonable exhaust manifolds?

@aaronshelton84 Жыл бұрын

@@rotaxtwin I've heard they're good flowing manifolds for a stock class where you have to run some sort of factory manifolds.

@peted5217 Жыл бұрын

@gregoryweber7408 Жыл бұрын

cool eclectic engine tear down they might be old but they were a corner stone for gm for a while and that small block is still highly regarded in circles for reliability and performance ability, thanks for showcasing a gem from the past sir

@GodPapa1640 Жыл бұрын

My absolute favorite part of this video, and I've watched it multiple times, is always, always when he steps away, and then runs at the dipstick tube and tries to catch it off guard and start pulling on it 😂 😂 😂

@nicolem.792 Жыл бұрын

Looking back in retrospect it’s really interesting that GM took the basic iron block from the 60’s as far as they did. These aluminum headed, overplumbed beasts were a marvel in their day, but time was not kind to them. Working on these doesn’t look fun at all. Then within a few short years the LS makes its appearance. The difference being that they started from a clean sheet for what they were trying to achieve and then just NAILED IT. Big takeaway for me on this one is just to appreciate what a wild improvement the LS really was….

@rotaxtwin Жыл бұрын

From the 50s really. Yeah the LS is a huge step. Just seeing that large aluminum accessory bracket on the front looked high tech from the old stuff.

@xalty1200 Жыл бұрын

early LS had teething issues like every design. they came out the factory with stop leak. composite head gaskets didn’t last but they took care of that pretty quickly

@peted5217 Жыл бұрын

LS was developed by NHRA record holder Engineers who worked @ GM. They knew what was needed and we're all the beneficiaries of their simplistic minimal powerplant marvel. The SBC legacy will live on ad infinitum

@WilmaTell Жыл бұрын

Wasn't really much of a change except for moving the distributor. Basically the same hp.

@TheNugler 9 ай бұрын

Working on these is definitely not fun in any f body car, d body's had more room to work in.