I appreciate the time you took for this review, however I would have like to know several other things like: how easy is it to replace a broken belt in the field, how is the spread when it discharges the grass, how well does it stripe, does it have the vanguard oil system, can you get a push bar with this model, does the engine go up and down with the height of the deck, how easy is it to change the oil and hydraulic fluid, how easy is it to access the pulley system under the toolbox, how accurate is the cut with the indicated height set by the factory (ie. is a deck height of 21/2 inches truly a 21/2 inches from the ground to the edge of the blades), how does it ride compared in general and when compared to other brands, how easy is it to reach the oil filter or battery, when cutting at higher speeds does it effect the cut quality (are there a lot of stragglers left behind), how sensitive are the hydraulics? These are some really important things that I would like to see you discuss in order to get a good idea of what we may be expected to see with this machine when it comes to performance. Thank you for your consideration good sir, and once again thank you for taking the time to share your current thoughts.

You need a Wright Zk. They will stick to virtually any hill. Their center of gravity is much lower, because the engine lowers with the deck. I used to use Skag's and Toro's mostly, and nothing is like the Wright.

I've been eyeing some of these standing mowers. I'd definitely add some AG/Bar tires to it. I think the Ag tires are the way most all mowers need to have.

I just purchased a Revolt 54 brand new, and the deck shakes at full throttle. I sent it straight back to the dealer, and they are trying to tell me that it is normal for the deck to shake. I feel like that can't be right. Does your mower run smoothly with the blades engaged at full throttle?

Looking at ordering a new 61” with the same motor. Curious if you think these have any issues with tearing up nice grass with stock tires and if the 61 is really that much worse for scalping? Have a lot of open lots so bigger deck makes sense for me if quality is there still