Baja Designs XL-Linkable Roof Lights 2021 Ford Bronco First Edition Install

Рет қаралды 13,970

2 жыл бұрын

Baja Designs XL-Linkable Roof Lights 2021 Ford Bronco First Edition Install
Today Mike walks you through how to install the Baja Designs XL-Linkable Roof Lights on a 2021 Ford Bronco First Edition!
Great quality product! Looks amazing! Puts out a ton of light!
Available for purchase at Middleton Motorsports: Click on the link
shop.middletonmotorsports.net...
Follow us on Instagram
@Middleton_Motosports
@Middletonmotorsports_4x4

Пікірлер: 33

@KelechisOrganicFruitGarden 2 жыл бұрын

Wiring already exist for that might want to read up on it instead of running along windshield

@MiddletonMotorsports 2 жыл бұрын

We didnt want to modify/cut the seal to runt he wire out to the lights. we felt this could cause water leaks and didnt want to make these cuts etc on a a first edition.

@johnt6673 2 жыл бұрын

I was thinking the same thing about running the wires.. Pretty sure ford had wiring up the a pillar so you would not see wires... The light bar looks nice, just need to correct the wiring issue.

@MiddletonMotorsports 2 жыл бұрын

We would have to cut/modify the seal. We felt that could cause water to leak in to the car and didn't want to modify the seals on this first edition.

@67wildwolf 2 жыл бұрын

@@MiddletonMotorsports Pretty sure the folks at Ford bronco HQ will be calling. After all they ran the wires.

@JarrettR96 2 жыл бұрын

Another awesome video!

@patmason7276 2 жыл бұрын

All I need now is a Bronco. Have the Bronco sport my daughter took it so now I have to get the big Bronco.

@scottievee7467 2 жыл бұрын

Is a Ruff the same thing as a roof? Kidding. Thanks for the tutorial. Doing the mirror lights soon.

@texasliam 7 ай бұрын

If you drill you can pass the hot wire through, but you need to add a ground wire. Check the motoroso install.

@wildhorses4x4 2 жыл бұрын

🔥🔥

@joezamarron4174 2 жыл бұрын

The Aux switches are already pre-wired my Good Sr.

@jacobfloyd686 2 жыл бұрын

Why didn't you use the aux switch wiring that is already ran above the windshield?

@colby78hurley 2 жыл бұрын

Aux switch wiring box is located in engine bay. Routes to aux switches above rear view mirror

@HaveBroncoWillTravel 2 жыл бұрын

I agree with Jacob why didn’t you???

@iamtherealzombie 2 жыл бұрын

@@colby78hurley And there is a wiring spot on the roofline that is pre-wired into the engine bay as well.

@2011blueman 2 жыл бұрын

@@colby78hurley The bronco has been prewired with a wire specifically up to under the left mounting bracket that runs down the A pilar so that the power cable is internal. Wiring it like they did is unprofessional and tacky.

@MiddletonMotorsports 2 жыл бұрын

We didnt want to modify/cut the seal to runt he wire out to the lights. we felt this could cause water leaks and didnt want to make these cuts etc on a a first edition.

@bajadesigns 2 жыл бұрын

Yeewaw :D

@garyzimmerman8679 2 жыл бұрын

What about using the switch wire that comes out the top?

@MiddletonMotorsports 2 жыл бұрын

we would have had to cut/modify the top and we don't wan to do that with this first edition.

@garyzimmerman8679 2 жыл бұрын

@@MiddletonMotorsports Not for sure why that would have to be done, But I do understand not wanting to cut &/or drill holes in the Vehicle.

@miceshinoda Жыл бұрын

@@garyzimmerman8679 you'll need to drill a hole to get the wires through the top

@Myjeepwaves 2 жыл бұрын

Just Remember, the smaller lights by the mirrors are to face out not forward. they are for profile visibility at night. You have enough light going forward.

@67wildwolf 2 жыл бұрын

Running wires? Guess this bronco doesn't have the aux switches with the wire pre run!

@bryanlevasseur3988 2 жыл бұрын

Ya already wired. Don't have too run wires

@eliteempire280 Жыл бұрын

Why didn't he run the words in through the top?

@2011blueman 2 жыл бұрын

It doesn't use the internal prewiring that runs up there? Definitely not going to be do this.

@MiddletonMotorsports 2 жыл бұрын

We didnt want to modify/cut the seal to runt he wire out to the lights. we felt this could cause water leaks and didnt want to make these cuts etc on a a first edition.

@mhrepoman 2 жыл бұрын

You guys must not know that ford already pre ran wires to several different places on the bronco for the upfitter switches. They go right to where the panel is so you can choose what switch turns on which light or accessory. There is a wire ran to the roof on the passenger side, 2 to the glove box, 2 to the rear passenger side and on to the front bumper. I know that's only 5, if they ran more somewhere else then I have no idea.