Try Amazon Music while you DIY: amzn.to/3ofLF4X Product: amzn.to/3HNidgh In this video, I show you just how easy it is to install the BakFlip MX4 tonneau cover.
Пікірлер: 46
@lynettewilkes7324 Жыл бұрын
Awesome as always!!!!
@skeeterlubidowicz9158 Жыл бұрын
Excellent video! Thanks for posting!!
@DIYBRY Жыл бұрын
Thanks for watching!
@garylofgrenАй бұрын
Nice job your step by step instructions were best so far of any YT for the bed cover and the one I’m going to be getting for my GMC. Thanks for this help.
@DIYBRYАй бұрын
Glad to hear it. Best of luck on the install. If you have not yet, please consider subscribing.
@SeriousDrama Жыл бұрын
I'll be installing my bed cover on Saturday. I'll use this video as my guide. Wish me luck!
@DIYBRY Жыл бұрын
Take Luck! Thanks for watching. Consider supporting the channel with a Super Thanks on the video ;)
@LeeTechReviews Жыл бұрын
very detailed and specific. thanks brother! i just ordered one also.
@DIYBRY Жыл бұрын
Thanks for watching!
@donbranson2931 Жыл бұрын
This is a well-done video! I've watched a few others by folks who nearly know what they're doing, so I appreciate that you made this helpful video, and that you know your stuff.
@DIYBRY Жыл бұрын
Thanks for watching!
@andrewvaldez97129 ай бұрын
Yes very instructive vid
@michaelparkinson1390 Жыл бұрын
Nice! Love the video brotha!
@DIYBRY Жыл бұрын
Thanks for watching!
@BornInOz6 ай бұрын
Thanks, very helpful video.
@DIYBRY6 ай бұрын
Thanks for watching! Subscribe! 🙌🏻
@kylesmith18367 ай бұрын
Life saver thank you
@DIYBRY7 ай бұрын
Subscribe!
@dmitriycantemir9 ай бұрын
Мужик молодец, доступно и понятно объяснил и показал ! 👍🏻👍🏻👍🏻
@DIYBRY9 ай бұрын
Спасибо за просмотр. Подписаться!
@mfunes1494 Жыл бұрын
I ran the drain hoses through the hole on the side of the bed. The put the weatherstripping on the cover along the rubber flap rather than on the bed of the truck. It’s spray lined, I figured it would stick better on flat surface.
@DIYBRY Жыл бұрын
Cool. Let me know if you experience any leaking.
@Jonlicht6 ай бұрын
I just installed mine. I used the secound ruber washer to put on the top side to work as a gasket between the bolt anr the bed cover. That ead the main difference i did when installing.
@DIYBRY6 ай бұрын
Hope you love it!
@ihtenubz9697 Жыл бұрын
Just installed one on my 22 F150 following along with your video. Very much appreciated. I will note that I just put the drain hoses in the holes that are in the bed directly next to the drain spout. I’ll see how it holds up but not drilling or cutting into my bedlined plugs was preferred.
@DIYBRY Жыл бұрын
Awesome! Those plugs I show are rubber. So if you every took of the cover, you could just buy some new bed plugs and your back to normal.
@DIYBRY Жыл бұрын
Thanks for watching!
@Betevan007Ай бұрын
Amazing video just need subtitles in other languages, but you save me. Thanks.
@DIYBRYАй бұрын
Glad to hear it. Subscribe! 😎 Not sure how to have subtitles in other languages.
@forrestpanda3 ай бұрын
Thanks man, this is really detailed and informative. I initially thought I might not complete the installation by myself. After watching your video, I gained a little bit confidence. Also, I assume this cover will also fit 2023 F150.
@DIYBRY3 ай бұрын
I am very glad to hear that. It’s a pretty simple install. Here is a link for a 2023. (Make sure you choose your correct bed length) amzn.to/4bYykoA
@forrestpanda3 ай бұрын
@@DIYBRY Thanks man. A small question. I notice that the cover is for 5'.7'' bed size. The general F150 is 5'.5''. I assume they will fit?
@DIYBRY3 ай бұрын
@@forrestpanda Yes. Some of that will hang over the lip of the tailgate and the front of the bed by the window. This is the help prevent water from getting in.
@forrestpanda3 ай бұрын
@@DIYBRY Received it today and Unfortunately, the front left corner is fractured and falls off. A tight washer is missing as well. I file the return immediately and they claimed they will charge me 30% of the money for return. It would be a nice cover if it didn't have fractured parts. The installation is not difficult by one person.
@DIYBRY3 ай бұрын
@@forrestpanda Where did you buy it?
@muhammadaliaslam3706 Жыл бұрын
The pop rods doesn’t fit in to the dedicated holder when the bed cover is fully open unless I push the bed all the way in. This leaves a gap of around an inch between the cover (when fully closed) and the tail gate leaving the bed exposed to elements. Wouldn’t be the issue if pop rods could be slid a little more towards the tail gate. Any thoughts? F150 Lariat 2022 6.5’ bed
@DIYBRY Жыл бұрын
You can loosen the bolt and slide the bracket up higher, then put the prop rods in place, then slide the bracket back down. It took me a little while to figure that out.
@pedrovasquez5385 Жыл бұрын
What if I have a drop in bed how should I route the drain tube
@DIYBRY Жыл бұрын
Drop in bed liner? You’ll have to drill a hole that meets up with the ones shown in the video.
@PVVP500 Жыл бұрын
Are the drains really necessary? They look kind of bogus and cheap.
@DIYBRY Жыл бұрын
I’d rather not deal with water getting inside, but if you was to risk it, that’s your call.
@exbballfan4 ай бұрын
Nice job. But the music is annoying as hell
@DIYBRY4 ай бұрын
It’s free and believe it or not, it’s some of the best that I’ve found that’s free.