Welcome to TechNixx.!!
Eto po yung sinasabi kong maganda pang tanggal ng Carbon Deposit:
Honda Carbon Cleaner:
c.lazada.com.ph/t/c.YqgrJW
pang matagalan na po yan. hindi mo na kailangan magpa top overhaul ng motor mo. Same process lang po.
Leaking Valves
Intake and exhaust valves often face impairments from an overheated cylinder. The extreme temperatures can warp and ruin the valves, causing them not to seat or close properly. Once the seal breaks between the valves and the cylinder, the gases can leak. The result is compression loss.
In a vehicle, the intake and exhaust valves are at the top of the engine’s cylinder. The intake is where fuel and air pass through into the cylinder. When the elements combust, the exhaust valve gets rid of the gases. The exhaust valve fails more often because it has the most exposure to the heated gases that can reach temperatures between 1,200 and 1,350 degrees Fahrenheit.
The heat can either distort or break the valves, causing excessive leaks and compression loss. The cylinder’s valves can also gain carbon buildup, which often occurs on the exhaust as well. Carbon buildup happens here the most because it’s where a constant flow of burnt gases happens. Excessive amounts of carbon can destroy the seat, diminishing the seal on the valve.
Please support my Kid's channels too:
/ @ebutago
/ @aiorirobloxworld
Iglesia Ni Cristo: Ang Pagbubunyag
/ @inc_evangelicalmission
Thank you..! :)