This is a walk through of how to take apart and clear everything from a piece of filament stuck in the filament sensor to a full clog in the extruder.
Пікірлер: 23
@aeonjoey3d5 ай бұрын
Thank you SOOOOOOOO MUCH!!!!! Phew! This saved me! I was going insane! Had to take apart the extruder to find the clog exactly where you said it was. Lost my print (but only because power fail recovery started printing with the bed pushed up and bent my nozzle argh, separate issue, I have a spare) but I couldn’t figure out this clog until this video. THANK YOU
@gingergeekstudios2 ай бұрын
Glad it helped!
@toastencrawl62782 ай бұрын
Thank you! You just saved me from a heartattack... 💪🏽👍🏼
@gingergeekstudios2 ай бұрын
Glad I could help!
@Ari9112 күн бұрын
what a horrible trip to find this video as my solution
@gingergeekstudios12 күн бұрын
I’m Im Just glad you did find it helpful.
@Ari9112 күн бұрын
@@gingergeekstudios saved my night mate, thanks
@gingergeekstudios12 күн бұрын
You’re welcome
@MakerMadMatt2 ай бұрын
For anyone who might find it useful, you'll need a 1.5mm and a 2.0mm hex key. Filament Cutter: 1x 1.5mm screw Filament Sensor: 2x 1.5mm screws Hot End: 2x 2.0mm screws Extruder: 3x 2.0mm screws Extruder Body: 4x2.0mm screws
@gingergeekstudios2 ай бұрын
Thanks this is very helpful info.
@PeterAgostiniJdcap26Ай бұрын
What symptom does the machine have or do that you know you have a clog “ air printing “ ? Is one any other ? Ty good tear down video 👍
@gingergeekstudiosАй бұрын
The main way you will know is that the AMS will be making a grinding noise because its trying to feed filament but its not moving so the feeding gears are just scraping against the filament. If you’re not using an AMS then you will see the print head moving like it’s printing but nothing will be coming out of the nozzle.
@PeterAgostiniJdcap26Ай бұрын
@@gingergeekstudios thank you so the clicking sound or air printing . I look at these multiple color filaments and most have clogging issues so I don’t buy can you recommend a maker with no issues ? Ps : glow in the dark filament is notorious on breaking and clogging
@gingergeekstudiosАй бұрын
There are no FDM printers that will not have this issue. There are some that will do it far less than other but all are capable of clogging. The best way to prevent this from happening with a bambu is to leave the door open when you are printing with PLA and especially when the room your printer is in is not climate controlled.
@PeterAgostiniJdcap26Ай бұрын
@@gingergeekstudios i try that open door method with the multi color pla thanks
@gingergeekstudiosАй бұрын
You’re welcome. Happy to help. Let me know how it goes for you
@StrongBarnes906 ай бұрын
GREAT tutorial!!
@gingergeekstudios6 ай бұрын
Thank you!
@GuillaumeLTАй бұрын
You help me. Thanks
@Jrelim4 ай бұрын
I’m sorry but your hands are just covering everything all the time. Please fix this next time.
@gingergeekstudios2 ай бұрын
You are totally not wrong. I appreciate the feedback and I will work on that but in my defense, I do have pretty giant sausage fingers so it’s kinda hard to keep them out of the way sometimes. Lol