Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To

Рет қаралды 892,172

7 жыл бұрын

Want a small arcade cabinet that's easy to make? Here you go!
Don't pirate games! I own the Mario games shown in this video.
For more info, read the DMCA
en.wikipedia.org/wiki/Digital...
Get the digital plans here:
www.iliketomakestuff.com/produ...
My Full Size Arcade Cabinet series: • Arcade Cabinets
Setup 2nd player for iPac:
/ 2_player_ipac2_setup_f...
TOOLS LIST:
(some are better than the versions I own)
In case you're wondering, I used a Dell 17" LCD monitor Model# E176FPf but just about any 17" 4:3 monitor should work here.
amzn.to/2aCJYGu - SawStop cabinet saw
amzn.to/2axFPsA - Skil circular saw
amzn.to/2axOLvq - Dewalt 20v drill driver combo
amzn.to/2dcJoTR - Countersink drill bits
amzn.to/2akFubx - Orbital Sander
amzn.to/2aCJP5O - Pancake compressor/nail gun combo
amzn.to/2axFRRs - Jigsaw
amzn.to/2axPah6 - Grizzly 14" Bandsaw
amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
amzn.to/2axGlH9 - Kreg Rip Cut (circular saw guide)
amzn.to/2awLSaO - Shop Fox Hanging Air Filter
amzn.to/2akFN6c - 2HP Dust Collector
amzn.to/2aovz06 - Respirator
amzn.to/2axPmNA - 1 Micron bag
amzn.to/2aD7DGO - 11" Digital protractor
amzn.to/2ay8MSs - Digital Angle Gauge
amzn.to/2akGcWk - Classic steel ruler (cork backed)
amzn.to/2ay9XRX - CA Glue (medium)
amzn.to/2ay9T4v - CA Activator
amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
www.ebay.com/itm/110934669362?... - Arcade buttons
www.ebay.com/itm/ZIPPY-Classic... - Joystick (Zippy style)
amzn.to/2gwLuk6 - Computer speakers
amzn.to/2axieIm - Raspberry Pi 3
hamzn.to/2aAxSQS - Multimeter
amzn.to/2anW7yq - Wire
amzn.to/2awMqgO - jumpers (Male to Female)
www.ultimarc.com/store/section... - iPac 2
amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones)
amzn.to/2gb6IQ2 - Wire connecters
www.t-molding.com/1-2in-orang... - T-Molding (1/2" x 20ft.)
amzn.to/2giSRc3 - Slotting cutter
amzn.to/2gdoYsq - Arbor
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
www.iliketomakestuff.com/patreon
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
• Bar Top Arcade Cabinet...
I Like To Make Stuff
/ iliketomakestuff

Пікірлер: 850

@Nerdforge 7 жыл бұрын

Just google! Everyone knows what that means ;) yet another awesome project though, thumbs up!

@simonvreman 7 жыл бұрын

Natural Nerd ill make sure he gets to pay for his games.

@mitchelwb 7 жыл бұрын

I believe it means "I have no issue monetizing a video exploiting the rom files, but I'm going to take the high road on the legality of using them". So I'll tell you: Google 'pleasuredome'

@Nerdforge 7 жыл бұрын

or it means: "look, I am building a cool arcade machine"!

@mhendrick 7 жыл бұрын

I am not sure why this is controversial archive.org are achieving and making available tons of old software and emulation tools including many of these games. There is a specific DMCA exemption to preserve vintage software they are operating under.

@atomichabanero9101 7 жыл бұрын

Thanks guy its worth a look just for the three stooges episodes

@bkxc 7 жыл бұрын

Oh man, I've been dreaming about building a full-size cabinet for YEARS. But this little thing is so much more reasonable. Have you seen the crazy pinball machines people are building with big HDTVs as the play surface? Really neat.

@calivalley9056 7 жыл бұрын

BKXC Just checked out the virtual pinball builds, didn't know it was a thing, they are amazing! Thanks for the heads up.

@bkxc 7 жыл бұрын

Haha, yep, get ready to go down the rabbit hole!

@tomsharpe8181 7 жыл бұрын

BKXC what are you doing here???!!!!

@defalt_457 7 жыл бұрын

BKXC try to make a bottom stand to make it a full sized one.

@isaacsevier7084 6 жыл бұрын

BKXC ¥

@christopherkeeler2530 5 жыл бұрын

Bob, thank you for this video! I just finished mine with your plans and it's a big hit with the fam. My mods: I used an old Dell monitor soundbar mounted on top of the marquee for sound. Volume knob and headphone jack are built-in and readily accessible. Salvaged a 4:3 19" monitor so had to widen cabinet a few inches, but bigger screen. And it was free! Salvaged a removable fan vent for the bottom to access controls wiring. Added a switched power plug to rear door and integrated with salvaged power strip inside. Total project cost was under $200.

@IslandLooter 4 жыл бұрын

I've built three cabinets now over the past 5 years and each one was a ton of fun to make. First was a full size bartop about a third bigger than this one, second was for my brother built around a 10" iPad screen that is 1 player and I just finished building a mini one built around a 5" screen for my desk. I've learned a lot over the way but I picked up some great tips in this video that will certainly help my next build. I've been told to sell them for $ but like you said in your full size build the cost and time involved can be incredible, particularly when you're hand crafting and designing as you go. Great work here!

@teeallen1217 7 жыл бұрын

Bob I made one of these a year or so ago and sold it. I want to make another one now that youve posted this video. Youve touched on some ideas I didn't think of when making the side panels and monitor mount. Thanks again for the great video!!!

@Iliketomakestuff 7 жыл бұрын

The digital plans are now available so that you make your own bar top arcade!! www.iliketomakestuff.com/product/bar-top-arcade/ *for those asking, the printable temples are at the bottom of the .pdf. Print those and UNcheck "scale to fit" to get them to print at full size.

@BroTechGames 7 жыл бұрын

Thank you for the plans bob, best I could find at a really reasonable price, I look forward to trying this for myself!!

@wherever.5511 7 жыл бұрын

I Like To Make Stuff Hey bob, I bought your plans for the Bartop arcade and when I prong out the 2 templates it only prints on one piece of paper. Any way to fix it. Thanks

@GuitarGodgt 7 жыл бұрын

Since the ipac is $40, if people are only going to do a 2 person build I think the control block from petrock block is better for this build at roughly the same cost ($40 plus shipping to the USA). Gives connections for a switch for the pie and an led indicator for boot up and boot down times.

@radioogretv2089 7 жыл бұрын

I Like To Make Stuff Just one question, how much does the whole project cost, including RetroPi, iPac, cabinett, LEDs etc.?

@aidanpeel9093 7 жыл бұрын

I've also bought the plans but can't print the side plan to scale it only prints out on one piece of paper how can i print out to scale plz

@lifeinthemake4966 7 жыл бұрын

And to think I was just getting ready to recycle the same monitor i have in my garage. I dig all your stuff Bob thanks for being a consistent source of inspiration. Happy thanks giving to you and yours.

@Iliketomakestuff 7 жыл бұрын

Thanks so much! Happy Thanksgiving to you as well!!

@Arablelecrocket 7 жыл бұрын

Brilliant stuff I'm not in the least bit interested in building a gaming machine but the flow and build quality of this project make it well worth watching. It's also very strange the way various tips come through whilst watching and this is a real bonus. Thanks for all the energy that you put into these projects I have seen all of your stuff and found little nuggets of inspiration hidden here and there.This from a retired cabinet maker who actually started making furniture at the age of six.

@gregghernandez2714 4 жыл бұрын

Great tutorial, thanks! I am currently collecting the stuff I need for a cabinet build. I bought a Viewsonic monitor recently that was originally 16.00 bucks but I got it for 1/2 off! I guess once the motherboards no longer had the old VGA connectors and the manufacturers went to HDMI, people got rid of their old monitors which still work great. I fired up the Viewsonic and it works perfectly. Thanks again.

@TSAlessi 7 жыл бұрын

Perfect timing Bob!! Was going to follow your other build and try scale it down for a Christmas present for my nephew! Well played sir! Thanks & Keep it up!

@jacksontaylor9878 7 жыл бұрын

I'm thankful for Bob who inspired me to build my arcade this thanksgiving

@claudioscola 4 жыл бұрын

Nice! When I made my sides, I used a 6mm mdf panel glued to a 9mm mdf panel. I routed out 3mm border from the 9mm panel first. This gave me a great 15mm panel with perfect 3mm grove for the T rubber moulding. The advantages of this method is common router bits can be used instead of a 3mm slit cutter, simple and it is accurate AF!.

@BruceAUlrich 7 жыл бұрын

Turned out great! if you wanted a different want to diffuse the light on the lexan, you could sand another piece and sandwich your logo between them. Might give a nice frosted look.

@jeremygunkel 7 жыл бұрын

I have a raspberry pi 3 running retro pi.... Kids and I absolutely love playing old nes games. Great build Bob!

@alecswangler6990 Жыл бұрын

I just want to say that the best thing about your videos is the fact that if something isn't exact or perfect you explain why exactly why it's okay if it isn't, you are also very open about what products may be good or bad and why, but you are also very open to say it's your opinion which I love. This video has made me want to try to make my dad one of these as he loves the game Satan's Hollow, but it is impossible to find. I am hoping Raspberry Pi prices drop soon so I can try since I don't want to spend all my money if I fail lol

@RetroGamingOnline 7 жыл бұрын

This is great, i have been debating between the full size and the bar top. Now i have both options from you!

@Wordsnwood 7 жыл бұрын

That's a good size, Bob! Turned out great.

@tomypower4898 5 жыл бұрын

Wordsnwood (Art Mulder) Yes magazine

7 жыл бұрын

that T molding looks grat, love the black and orange contrast! Also I can´t wrap my head around the fact that you are going to have 1 000 000 subs soon. Congratulations and thank you for your work!

@TrevorVera 7 жыл бұрын

great idea i never thought to make your OG design smaller, this would go perfect for my bar

@KanoWhite53 7 жыл бұрын

Sweet man! I've been playing around with Retropie and have been planning a small cabinet and arcade button kit, so this will be perfect!

@SpecificLove7 7 жыл бұрын

Love the smaller version

@Iliketomakestuff 7 жыл бұрын

Thanks!

@ShadowRunner7723 7 жыл бұрын

absolutely awesome work! my only regret is not finding this sooner! I'll definitely be giving this a try soon

@DeweyKentM 7 жыл бұрын

I loved your full size cabinet videos, but it seemed kind of overwhelming. This video makes the process seem a lot more graspable. Awesome vid!

@ScrapwoodCity 7 жыл бұрын

No matter how many of these you make, they will always be a fun video aand project to watch! Thanks for sharing!

@abovethegaragewoodworking4081 7 жыл бұрын

Excellent project!! Just the right size. Keep up the great work Bob!

@RSpudieD 7 жыл бұрын

Turned out pretty nice! Nicely done and happy thanksgiving!

@kydoo_6686 6 жыл бұрын

Your like the only wood worker/builder person on KZfaq I like because your pretty young and stuff and your videos are enjoyable!

@simplediyr 7 жыл бұрын

How did I miss this one. So glad you made this small version. Gonna do this in the next few weeks ;-)

@Ovni121 7 жыл бұрын

very nice! I like that you included links for parts and tools.

@MikeStange0 7 жыл бұрын

Perfect project Bob! This is now on my to do list!

@LOJO5000 7 жыл бұрын

Ive been waiting for this video!! I knew you would eventually do it.

@samaker4 7 жыл бұрын

I like the way you did the add on this one Bob!

@stevemiller6968 7 жыл бұрын

This is by far my favorite channel on the KZfaq!

@frenchtoast4365 3 жыл бұрын

The KZfaq lol

@sdmcustoms 7 жыл бұрын

that's awesome ,the electronics part scares me though ,it seems easy watching you connect everything but it just overwhelms me

@alanw305 2 жыл бұрын

I've always wanted to build one of these. Great video! Thank you for all the helpful links!

@JonathanRansom 7 жыл бұрын

Bob, this is great! I hope you make the plans/templates available to purchase. While I love your full-size arcade cabinet, this one is more practical for me to build. Thanks for the great content and Happy Thanksgiving!

@Iliketomakestuff 7 жыл бұрын

We ran out of time to get the plans put together but I may end up releasing the templates for the side panel and control panel. Thanks and happy Thanksgiving to you as well!

@philly8301 3 жыл бұрын

This video has me motivated to build my own bartop arcade. I have my version in the works, it will have a 32" lcd tv and a setup with the raspberry pi4. I tested it out and I highly recommend it if you are going to use the consoles such as the n64 or Playstation 1. It will have a 2 player configuration with an 8 button layout, once I receive all of the materials I will shoot a KZfaq video for you to check it out. I appreciate all of the information and Keep up the great work!!!!

@DOCDARKNESSREAL 7 жыл бұрын

Great project Bob and very accessible to us all - totally gonna make this in the new year👍

@Iliketomakestuff 7 жыл бұрын

Excellent!

@Angultra 5 жыл бұрын

Nice and clean with the stock monitor flush against the bezel, no need for disassembly or plexiglass.

@jay_mate8739 7 жыл бұрын

would be cool if you could make a pinball machine, full size or mini! i like to think it would require a lot of different materials and techniques

@AndyMac40K 4 жыл бұрын

Unreal, definitely working on this during quarantine

@nickq615 7 жыл бұрын

Awesome job man! I just bought all the parts to build my retro pi inside of an NES game cartridge. If I get the space in my poker room, I may need to add this in there too!

@Iliketomakestuff 7 жыл бұрын

Nice!

@tristandui7171 7 жыл бұрын

Amazing video and a great project. Keep up the good work Bob:)

@tatooldchannelarchive4367 7 жыл бұрын

"Really old monitor" So that's why my school has like 300 of them.

@KasamS 7 жыл бұрын

tatoPOTATO my school had them aroung 2 years ago but we got some now samsung ones, still the same pc tho

@sterlingsilver8148 7 жыл бұрын

tatoPOTATO my school has those monitors as well!

@Out_of_Czech 7 жыл бұрын

Yeah, it's called 'Old School' :D

@yetyy1 7 жыл бұрын

at least you got those... we still have cathode tube monitors over here

@wtfPlatypus 7 жыл бұрын

They are great as a very inexpensive 2nd monitor.

@TheBRad704 7 жыл бұрын

Very cool Bob. This desktop arcade is something I can actually see myself building. Oh, and the sweatshirts are in the mail!!!! :D

@AlexandreEYLER 7 жыл бұрын

I loved the popsicle trick :)

@andylazar1346 7 жыл бұрын

I was literally searching this up yesterday, thank you!

@Iliketomakestuff 7 жыл бұрын

Excellent, hope it's helpful!

@kaleo738 7 жыл бұрын

Normally I watch these kinds of videos only because I find them interesting but I really wanna try making this! It's so cool~

@Iliketomakestuff 7 жыл бұрын

Excellent! Do it!

@joeymarten8751 7 жыл бұрын

that's so funny! I was inspired by your first machine so I decided to make a bar top cabinet in my tech class and now you made one!

@Iliketomakestuff 7 жыл бұрын

Awesome!

@98808 7 жыл бұрын

I am planning to do one un the future for a while and I think that this is everything that I need to ser to start right up! Yours turn out so good looking...congrats!

@Iliketomakestuff 7 жыл бұрын

Thanks!

@FredMcIntyre 7 жыл бұрын

Awesome work Bob!

@Iliketomakestuff 7 жыл бұрын

Thanks!

@FredMcIntyre 7 жыл бұрын

Have a Happy Thanksgiving!

@leokalaitzis 7 жыл бұрын

it remind's me the old days.Well done!!!

@miraclechild_502 7 жыл бұрын

awesome video... I made a full sized on out of one full sheet of plywood and a few scrap pieces I had laying around. I also just made a bar top as well but out of MDF... now I'm working on building a pinball cabinet...

@Hubbmade 7 жыл бұрын

Very cool Bob. I would probably never make the full sized version... but I have an old monitor and HDMI adapter, so this version is a possibility. Thanks again for the great content.

@Iliketomakestuff 7 жыл бұрын

Great to hear Ryan!!

@JoshMakesStuff 7 жыл бұрын

That turned out great!

@Iliketomakestuff 7 жыл бұрын

Thanks dude!

@bradymann2263 7 жыл бұрын

The P.I. Workshop who watches these kinds of videos but never make it

@JoshMakesStuff 7 жыл бұрын

Brady Mann is that a question? Or are you saying that I won't ever build one?

@bradymann2263 7 жыл бұрын

No I accidentally wrote it as a reply on yours

@jonathan90881 7 жыл бұрын

holy crap, I was about to start building something like this as a Christmas present. You even have the same monitor I got!

@BenTvHowman 5 жыл бұрын

Awesome as always love your vids and creativity

@chrisunrath8343 7 жыл бұрын

Looks awesome! Totally going to have to get the plans from your web site!

@GetHandsDirty 7 жыл бұрын

Great stuff!

@electrobro-hb4uj 3 жыл бұрын

I’m shocked you have not gotten 1 like your welcome! I loved your floating desk!

@lagrottedubarbu 7 жыл бұрын

awesome build, got a project just like that in the making... have the same problem, not that much space so tabletop is the ideal as usual great video, thanks :D

@polkod 3 жыл бұрын

Brilliant techniques especially the popsicle stick method.

@mmustapicst 7 жыл бұрын

What a genius this man is. Wow.

@xragexxx 7 жыл бұрын

dude I love your videos, keep up the good work...

@Iliketomakestuff 7 жыл бұрын

Thank you!!

@xragexxx 7 жыл бұрын

I Like To Make Stuff, would you recommend an impact driver if I already have a cordless drill. and can I buy the template/plans for this one on your website?

@Iliketomakestuff 7 жыл бұрын

Amir Karimabad The impact driver isn't necessary but it is pretty handy if you can get one. I don't have plans for this smaller machine, but I may release the template for the side panel and control panel soon (when I get some time to prep the files)

@xragexxx 7 жыл бұрын

I Like To Make Stuff cool thank you very much :)

@koelecat2755 7 жыл бұрын

I Like To Make Stuff i want to try to make one :) but my english is not the best cuz im dutch

@janineharris3601 4 жыл бұрын

Awesome I had to subscribe. You are killing everyone more people need to look at your stuff

@yuvseemrith3745 7 жыл бұрын

hi bob ,always inspiring people with wnderful ideas ,thnkks

@MrHandwerk 7 жыл бұрын

Something I have always as a child made of cardboard. It has never funkitoniert: D great video! Greetings MrHandwerk

@thomasongherth1174 7 жыл бұрын

MrHandwerk It never worked u ment right? btw im German

@MrHandwerk 7 жыл бұрын

No, unfortunately not. I was 10 years old. : D

@MrHandwerk 6 жыл бұрын

@hiddel3358 5 жыл бұрын

@Joe Blow Yeah that's not really that hard. Nintendo Labo + Switch = Arcade. This is good

@AndyGeswein 7 жыл бұрын

Man I wish I had the time to knock this out. It would be so much fun. I'll definitely have to get on this by the time my little one gets a little older.

@timokapitein414 7 жыл бұрын

I saw this on Mike and Laurens channel allready and I was sooooooo exited

@Iliketomakestuff 7 жыл бұрын

Ah, nice!

@timokapitein414 7 жыл бұрын

+I Like To Make Stuff ;) thumbs up

@codtrust5893 7 жыл бұрын

Thanks for the help I look forward to building my cabinet in a few days

@davestrain1762 7 жыл бұрын

Great project and Video Bob! This solves my issue with where do I put the full size one if I built it... I actually am working out the design for a cocktail style but maybe this is better. Keep up the great work!

@TheKurtsPlaceChannel 5 жыл бұрын

Very nice video and fun to watch. Have a nice day.

@imortaldeadead 7 жыл бұрын

WoW, looks fantastic 👍👍👍

@Iliketomakestuff 7 жыл бұрын

Thank you!!

@Melo_Vinicius 7 жыл бұрын

Beautiful work brother Your video inspired me not to make an arcade machine (this I intend to do the big version of the previous videos) but to make a jukebox / karaoke machine Congratulations on the work and continue posting expensive quality videos, you go far Ps: sorry for English, I'm Brazilian and I'm using google translator, I understand English well, but I'm not good at writing in this language

@Iliketomakestuff 7 жыл бұрын

Thanks so much!

@hydra1668 6 жыл бұрын

I did something like this at school. Wait, no i did basically exactly this with the same RetroPie software. Awesome.

@stephens222 6 жыл бұрын

Just got my plans. I looked around and liked yours the best. Plus you have a video. I may have to adjust the size a bit for the speakers I wanted to install.

@stephens222 6 жыл бұрын

Already screwed up. Haha. I used the template but the cabinets is way too skinny. I printed at full size too.

@pixio710 7 жыл бұрын

It was so good, I watched it twice! Great video. =D

@Iliketomakestuff 7 жыл бұрын

Awesome, thanks!

@londongaz2 3 жыл бұрын

Super cool project... subscribed

@247videogame 4 жыл бұрын

Nice work!

@BronkBuilt 7 жыл бұрын

Nice video. I think this will need to be a build with my son.

@tomypower4898 5 жыл бұрын

BronkBuilt of course yes

@Philbrush 7 жыл бұрын

I was going to make a little single play arcade, but burnt out the 10" monitor...so I decided to upscale, but need to get some player 2 controls, then I will start the bartop arcade...all that waffle aside, this design slightly modified for my donor monitor will be perfect!

@2freshprint853 7 жыл бұрын

love your channel bro keep it up!

@PianoMan365247 7 жыл бұрын

excellent as always

@randallmasoner 7 жыл бұрын

I love this smaller version!

@Iliketomakestuff 7 жыл бұрын

Thank you!!

@italiancatdad6679 7 жыл бұрын

If only i had the tools! haha. Still man, great work as always and keep being awesome!

@LucDesormeaux 7 жыл бұрын

Just bought the plans and will me making thing sometime soon. I have to say the plan are great, very detailed. And adding the full size printouts for the sides and the control panel is an awesome idea. I may end up using a wide screen monitor instead, so I guess that I can just enlarge the whole thing by changing all the 17 ⅜ measurements to the required monitor width. I'll play around and see. :) Thanks again for making this Bob.

@Iliketomakestuff 7 жыл бұрын

Awesome! Yes, just changing the width will work unless the height of the monitor changes dramatically. If you stay in the 23"/24" range, it should be fine. Have fun!

@LucDesormeaux 7 жыл бұрын

That's my plan. Maybe a 20 or 21" 16x9 monitor. I have on old Samsung lying around. Worst case, if there is too much free space around the monitor, I'll decorate. :)

@embryon1111 7 жыл бұрын

Excellent vid!!! And I've watched a few.

@AwesomeWoodThings 7 жыл бұрын

Video games FTW! Love it!!

@CrisArh 7 жыл бұрын

this one is rly nice, gj !

@Sonal_Mobile 7 жыл бұрын

This is really cool! I like when your projects blend 2 different kinds of skill set

@user-yv2cz8oj1k 4 жыл бұрын

I picked up a pandora's box 6 for about the same price as a pi zero w, all the hard work was done for me, got to love people selling year old stuff on.

@cjberthold94 7 жыл бұрын

I love your videos man

@Kopitarko 7 жыл бұрын

damn it Bob, it looks so easy to build this when I am watching you...and I know its not. great stuff, more!

@pesto12601 7 жыл бұрын

Yeah.. easy when you have a) a shop full of tools all setup and ready to function b) the time needed to measure and make everything c) a reason for making it (ie: youtube channel and the need to upload videos) For the rest of us - I'll just purchase an already cut cabinet and assemble... getting all those wires connected and setup will take me long enough!

@olympicpoolservices2588 7 жыл бұрын

pesto12601 I

7 жыл бұрын

pesto12601

@fununclenerfs 7 жыл бұрын

"Just Google..." lol

@caseya3579 4 жыл бұрын

Now if that doesn't sound suspicious.. lol

@GavinMiller2633 2 жыл бұрын

I saw this comment right when he said it lol

@leonardoromero8 2 жыл бұрын

Love it bud, great video. God bless!

@PeterComixShow 7 жыл бұрын

Wow! That is so cool

@gaming-zombie1392 7 жыл бұрын

Awesome Job!!!

@krnxemb 7 жыл бұрын

Sweet... I've been thinking about using my Pine64 to make this size since the first time i saw your full-size arcade video, but have been procrastinating. Now, i really have no excuse. Hope my board is still good for this project :)

@RODRIGUEZ13005 7 жыл бұрын

I just found out this channel and is awesome, is the 1st of my favorites list (of course after my channel, just kidding, mine it's not that awesome) great job, great explanation, great videos. thank you.