Ultra Stratocaster Build - Part 3 of 3 (Assembly)
Рет қаралды 42,838
3 жыл бұрынSubscribe to This channel: bit.ly/37w0DKl
Please don't forget to subscribe and follow me on social media :
Instagram: / baradaguitars
Facebook: / baradaguitars
Twitter: / baradaguitars
Barada ®
Handcrafted Guitars & DIY Guitar Kits
#baradaguitars #handcrafted #guitar
@BaradaGuitars 3 жыл бұрын
Please tell me what do you think about this build specifically and my content generally ? You can help me to continue by sharing my videos with your friends! Thank you all for watching!
@fluidalchemist68 3 жыл бұрын
It’s beautiful, thank you so much!
@BaradaGuitars 3 жыл бұрын
@@fluidalchemist68 thanks for watching
@paul23fitz 3 жыл бұрын
You’re a very talented woodworker and the guitar looks beautiful. Amazing job!
@BaradaGuitars 3 жыл бұрын
@@paul23fitz many thanks !
@heY-iTs-nAtHan-0.0 2 жыл бұрын
Do you sell guitar?
@BBQ1953 3 жыл бұрын
In my humble opinion: you build amazing guitars but in my 57 years of playing and having owned over 30 guitars during that time, I must say that this ultra Strat is the most beautiful version of the guitar that I have ever seen. We didn’t get to witness it being played so I can’t speak to it fulfilling every element of my fantasy but still, its beauty has no comparison.
@BaradaGuitars 3 жыл бұрын
I'm glad that you like it that much! Thank you for your time and this lovely comment!
@goodgoat3096 3 жыл бұрын
You are a true craftsman and artist, this is the most beautiful guitar that I have even seen. The gold hardware was the only choice with the warm wood tones. EXCELLENT!
@joebryant8500 3 жыл бұрын
Not normally a fan of stained guitars or gold hardware let alone both. But what you've made there sure looks classy.
@BaradaGuitars 3 жыл бұрын
Glad you like how it looks!
@raulmartinez3484 2 жыл бұрын
That Stratocaster build came out beautiful! From the hardware choices to how you carved the body was something I haven't seen before. I built my own Stratocaster recently, but it doesn't come close to the amount effort you put into yours.
@mikel4159 2 жыл бұрын
Looks amazing man, the contrast of the wood and the hardware, I like it!!
@jurgenzoller4407 3 жыл бұрын
Top shelf guitarc with high quality parts and workmanship. But I have never seen such a beautiful, glossy oil finish. Just perfection
@BaradaGuitars 3 жыл бұрын
Many thanks glad you like it!
@guitarsbymetaljay 2 жыл бұрын
What a beautiful hand crafted instrument you have created!
@stefano.salari 3 жыл бұрын
Congrats, a very nice work indeed, inspiring and well documented! Thanks for sharing. It would be nice to hear how it sounds, too.
@BaradaGuitars 3 жыл бұрын
Many thanks, the next video will be very soon on the channel! Stay tuned!
@nospamhere1144 2 жыл бұрын
OMG that guitar is gorgeous !!!!!! Excellent job...I'm jealous of whomever the owner is whether you or someone else......just wow!!!
@dumbass626 3 жыл бұрын
Absolutely gorgeous! Now I wish I had the space and equipment to make guitars too hahaha Looking forward to more of your videos!
@BaradaGuitars 3 жыл бұрын
Thanks for watching and let me know how it goes!
@eladperez7577 2 жыл бұрын
Great build and very nice videos! Good job
@JohnLee-mq4hk 3 жыл бұрын
It looks very classy, great job and enjoy the sounds.
@BaradaGuitars 3 жыл бұрын
Glad you enjoyed it!
@danelectr 2 жыл бұрын
The best build!
@Hague9975 3 жыл бұрын
Absolutely beautiful, very nice work!
@BaradaGuitars 3 жыл бұрын
Glad you like it !
@dixingxu 3 жыл бұрын
amazing work, splendid craftsmanship! thanks for sharing
@BaradaGuitars 3 жыл бұрын
Thanks you!
@rondobondo6600 2 жыл бұрын
Wow!!! It's beutiful amazing job....😁
@TommySG1 3 жыл бұрын
Great video - thanks so much! I’m having a Strat body built with all of this same stuff you used here. I did not know about the Claw adjusting mechanism from Schaller though so I ordered one straight away. It’s a beautiful finished look for sure.
@BaradaGuitars 3 жыл бұрын
Many thanks for your time! I’m glad that you like my work
@TommySG1 3 жыл бұрын
Oh my pleasure, as I mentioned to you I have the same hardware, well it’s almost the same. Schaller was making this in what I believe they called ‘vintage copper’ ( kinda bronze looking too ) it’s beautiful. It took me quite a while to find everything because I’ve read that they stopped making all of this in that finish sadly. I had to order a few parts from Germany & France too. I do wish they still made the bridge, tuners etc.. in this finish though, I can’t see people not wanting it to be honest. Thanks again, great video really.
@TommySG1 3 жыл бұрын
Oh, The one I’m making here is ( I am only assembling it, I’m having Texas Toast cut me a one-piece body out of Swamp Ash ) a Swamp Ash body which will be painted Mary Kay White and a solid rosewood neck I purchased from Fender and then all the Schaller vintage copper hardware of course 👍
@hopespotbrand.1725 3 жыл бұрын
Awesome guitar!
@jeffmckinnon5842 2 жыл бұрын
This was a great series of videos and the guitar would be a pleasure to own. I don't think I would have made the same decision as you did when it came to the pickup rings not fitting and I am sure you were more than a little disappointed having to do that so the show could move forward. It just goes to show how hard it is to get everything fitting right on a hand built instrument with some ordered parts. This is not something that can't be addressed and I know you will remain aware and learn for the future builds that you do. Well done my friend
@BaradaGuitars 2 жыл бұрын
Many thanks for your time and I appreciate that !
@agostinoromano5016 3 жыл бұрын
It’s beautiful, thank you so much!
@BaradaGuitars 3 жыл бұрын
Thanks for watching!
@charleshuguley9903 3 жыл бұрын
Beautiful!
@SwitchbackXThunter Жыл бұрын
What a great series of videos!! Subscribed! Both on KZfaqs and your Instagram
@adslalex 3 жыл бұрын
Super video content and lenght, imma share it on the international guitar discord chat server! I'd kill to try this guitar, classy and well made :) smells talent and inspiration
@BaradaGuitars 3 жыл бұрын
Many thanks! Glad you like and maybe one day you will be one of my guitars!
@barnsworth8402 Жыл бұрын
When drilling holes in the neck at about 6:34 , I would put a towel between the sanding radius block and the fretboard to avoid scratching the frets
@BaradaGuitars Жыл бұрын
I would do that if those are nickel frets, but with alu you can’t do anything to steel frets
@coolwaterdvr 3 жыл бұрын
Beautiful! 😍🎸🎸🎸🎸🎸
@BaradaGuitars 3 жыл бұрын
Thank you!
@The..Butterfly..Effect 3 жыл бұрын
Excellent video, the details are a pleasure
@BaradaGuitars 3 жыл бұрын
Many thanks!
@Stratamania 3 жыл бұрын
The bridge parts are called Inserts or Bushings that the mounting studs screw into.
@BaradaGuitars 3 жыл бұрын
Thanks for the info and for the watching!
@dumbass626 3 жыл бұрын
Just to add, some people would call them ferrules too hehe The same would go for some tuners like the vintage Fender and Kluson tuners
@ngominh3050 3 жыл бұрын
Made by hands very good
@jorgevenditi 3 жыл бұрын
Great job!
@BaradaGuitars 3 жыл бұрын
Many thanks!
@agork 3 жыл бұрын
I was waiting for you to play it.
@NicolaIIILombardi Жыл бұрын
Beautiful guitar!! Pur only some cotton inside the springs tremolo,to make'em noiseless
@BaradaGuitars Жыл бұрын
I did that but I didn’t film it. Thank you for your time
@NicolaIIILombardi Жыл бұрын
@@BaradaGuitars thank u for great videos!!
@kawakalypse2770 3 жыл бұрын
Great work ans thank you for the tip with the Schaller SureClaw. Can you tell me the manufuturer of the single coil frames?
@kodi3881 2 жыл бұрын
Absolutely amazing! No sound test though?
@zenmasterdude1362 3 жыл бұрын
That's a beautiful guitar! Fantastic job! When do we get to hear it?
@BaradaGuitars 3 жыл бұрын
Within a week there will be a full build video plus the sound test. Thanks for watching and stay tuned!
@jasonintriago5594 Жыл бұрын
amigo soy de ecuador yo tambien me estoy dedicando hacer guitarras LES PAUL Y STRATOCASTER me gustan muchos tu videos
@jasonrickett561 2 жыл бұрын
Great work Barada guitars! One comment though, why not a hole in the rear cover to adjust the sure claw adjustment, without having to take it off?
@bryanbrubaker8054 3 жыл бұрын
I like the use of quality schaller products . Do you build the necks different if you use maple for the fretboard ( the skunk strip method ) ?
@BaradaGuitars 3 жыл бұрын
You could use both ways the strip method or without it, but the strip always gives a nice touch
@MaartenAnna 3 жыл бұрын
Wow, dude, that’s a stunning guitar! You play them? Or you sell them?
@denizgungor3459 3 жыл бұрын
Actually, I can't stand with clear gloss finish on strat bodies. But honestly, this baby is fucking awesome. Good job boss... In the end, folks, please trust the power of gold parts!
@BaradaGuitars 3 жыл бұрын
Many thanks Deniz!
@JordanSmith-fg6if 2 жыл бұрын
What is the purpose of the metal foil put in the routed holes before installing the pickups?
@Exsomos 3 жыл бұрын
It was perfect up until the last part... Personally I would have recessed the back tremolo cover like you did the control cavity, was very upset to see that. And lastly, NO SOUND DEMO?!?!?!?! Otherwise I watched all your videos from the start of your build, and you have done very well at building from scratch a very very beautiful and precise and high quality hand built Guitar and IMO what I think a Super Strat should be and worthy of bragging rights. Good job dude. Clap clap.
@BaradaGuitars 3 жыл бұрын
My dad has the same opinion like you about recessing the back tremolo cover, but I didn't want to go so far from the original design. The sound demo will be in the next full build video. Many thanks for your commenting and watching time ! Stay tuned!
@roberthuffman9027 Жыл бұрын
Sorry if I gave a thumbs down, did not mean to do that! Enjoyed the 3 part build series. Beautiful guitar. Curious, Why didn’t you recess the tremolo cover?
@theaudioguy2923 3 жыл бұрын
Are these guitars for sale and where? and would you think about making some Bass Guitars?
@forresthouser5807 3 жыл бұрын
Beautiful creation...Wish you had given us a sound sample ;>)
@BaradaGuitars 3 жыл бұрын
The sound demo will be in the next video, many thanks!
@MissYaBigMan 3 жыл бұрын
I think the issue with your single coil pickup rings is that they're for a Telecaster neck pickup, which is much smaller than a Stratocaster single coil pickup.
@BaradaGuitars 3 жыл бұрын
maybe that's the problem, have to get more info about that! Thanks for watching
@johnstitt2615 3 жыл бұрын
@@BaradaGuitars I got the same kind of rings for the single coils for two different builds. One set of pickups fit like a glove through the hole, the other set did not. I had to lightly Dremel the hole to make things smooth. I checked and the package definitely said Strat pickup rings.
@BaradaGuitars 3 жыл бұрын
@@johnstitt2615 when I purchased mine they were described as Strat single coil pickup rings
@johnstitt2615 3 жыл бұрын
@@BaradaGuitars Yes. So we had the same issue. Fun times with a file or Dremel(not so fun.....lolol).
@jeffmckinnon5842 2 жыл бұрын
Ahhh, I never caught that one. Good call.
@jorgecardoso6671 3 жыл бұрын
Cuanto me cobras por un mastil de 22 frets para mi stratocaster
@jaa2412 2 жыл бұрын
Hi, spectacular guitar!! Can you tell me how you did the wiring? Maybe you have the diagram? Which pots did you use? (250k/500k) Thanks!
@hectorheath 3 жыл бұрын
Would like to see a V and Explorer.
@BaradaGuitars 3 жыл бұрын
my custom design will be soon on the channel stay tuned, and thanks for watching !
@cuneyttayboga1979 3 жыл бұрын
Where is the guitar sound ? .... you should adjust the end of the video some little sound examples too.But congrats you did it good job mate.
@johnstitt2615 3 жыл бұрын
Regular drill bit or brad point drill bit for the neck plate holes in the neck ?
@BaradaGuitars 3 жыл бұрын
Brad point drill bit all the way for getting great accuracy
@johnstitt2615 3 жыл бұрын
@@BaradaGuitars Thanks for sharing your expertise.
@dannysiaw6585 2 жыл бұрын
Marvellous Man, a masterpiece, is it for sale? How much?
@paolo-1283 2 жыл бұрын
How to order the neck plate?
@andrijasentic9702 3 жыл бұрын
why make the electronics cover magnetic and not the tremolo cover?
@BaradaGuitars 3 жыл бұрын
Just because I didn’t want to go so far from the original design Thanks for watching!
@andrijasentic9702 3 жыл бұрын
@@BaradaGuitars yeah, I noticed you replied the same way to someone else. I just thought that you need to access the tremolo far more often than the electronics
@neangsopheak2319 10 ай бұрын
Hello, brother one set and how many dollars?
@user-rw7dm3zb3f 3 ай бұрын
Скажите чем покрыта гитара?
@kmatax9237 3 жыл бұрын
love everything but id dye the back cover black and sand it down slightly to show the flame. plain maple doesn't match rest of your color scheme, just my opinion
@BaradaGuitars 3 жыл бұрын
I‘m thinking of dying both with something like brown. Thank you for watching!
@kmatax9237 3 жыл бұрын
@@BaradaGuitars Definitely! im a huge fan of limba. looks and sound. i have a white limba telemaster with tortoise pickguard and mojo goldfoil humbuckers on my list
@pavlepaja7642 2 жыл бұрын
How much this guitar costs?
@redheart6995 3 жыл бұрын
either the bridge or the bridge pickup both look crooked
@flacoral 3 жыл бұрын
After watching all 3 videos, we don't get to hear it? What the hell?
@BaradaGuitars 3 жыл бұрын
The test will be in the next part of the full build. Thank you for watching!
@DanielDias33333 8 ай бұрын
Brother you've built such a nice guitar, but how could you go with those terrible pickups? Cmon man, the guitar is a 10 the pickups are a 1
Barada Guitars
Рет қаралды 133 М.
SCAR MY GUITAR
Рет қаралды 76 М.
Alamo Music Center
Рет қаралды 75 М.
Augment Guitars
Рет қаралды 162 М.