Рет қаралды 3,334
Following on from the FreeCAD 0.22 theory lesson we will tackle our first exercise, a drilled shim. We will be creating the object from a technical drawing.
We will learn
- Setting up the panels and toolbars in the part design.
- Introducing the part design workbench
- What is a body
- Using the task pane to guide us through the process.
- What is the origin object in the treeview inside the body.
- Setting our body as active.
- Introducing the sketcher.
- Creating our first sketch and attaching to a plane
- Setting our scale.
- Apply a constraints, dimensioning and aligning.
- Auto constraints and auto remove redundant constraints.
- Creating a rectangle.
- What is a profile.
- Wire not close and how to fix.
- Validating a sketch
- Understanding degrees of freedom (DofF), under constrained and fully constrained.
- Making apply constraints quicker.
- Applying the pad operation.
- Editing sketches
- Making a full drilled shim in FreeCAD
Public playlist : • Basic Beginners FreeCA...
NOTE: If your a patreon then you will have access to the early access private playlist.
#FreeCAD , #CAD , #3DPrinting
Journey with me and
Patreon
/ mangojellysolutions
Donate:
ko-fi.com/mang0
www.paypal.com/paypalme/darre...
Subscribe:
/ @mangojellysolutions
Browse my Redbubble Shop:
MangojellyLabs.redbubble.com
Blog:
mangojellysolutions.blogspot....