쉽게 꺼내는 공구 거치대의 기본 방법 / 목공 DIY

Рет қаралды 4,572,438

검은별 공작소 Shorts

5 ай бұрын

#목공 #목공diy
Basic method of easily removing a tool holder / Woodworking DIY

Пікірлер: 620

@swooopg 5 ай бұрын

That 10mm is always missing!

@earlfears 5 ай бұрын

Damn, you beat me to it.

@muratyildirim8446 5 ай бұрын

+13mm

@nxtc77 5 ай бұрын

Came here to say that!

@kennethboyer2338 4 ай бұрын

For me it's always 3/8.....

@jasonrubik 4 ай бұрын

@@nxtc77 why hang the 10 mm on the wall when there are hundreds of them "strategically" scattered about the entire place

@Ufa_Expert 4 ай бұрын

Пойду куплю себе циркулярную пилу, стол для нее с направляющими, торцовочную пилу, электрорубанок, гриндер, бруски И СДЕЛАЮ СЕБЕ ТАКОЙ ЖЕ ДЕРЖАТЕЛЬ ДЛЯ ГАЕЧНЫХ КЛЮЧЕЙ! 👍💪

@Wateringman 5 ай бұрын

Absolutely beautiful design idea! However; if there is one thing I may suggest! In the front of those slots for the wrenches, or many other tools, you could rasp the front of the slot, in a slightly open "V" shape, to make it much easier to replace the tool back, to its original position on the wall rack.

@phanties 4 ай бұрын

I would use an oscillating tool not a rasp.

@Wateringman 4 ай бұрын

@@phanties Nope. Too many woodworkers are sold and convinced now on the idea of power tools. A cabinet makers hand stitched teeth rasp, is a dream to use. Expensive; but worth every penny. It gives not only total control to you, but leaves no marks on the wood. And because you do it by hand, it allows to choose precisely how wide, and what angle better than a power tool. All you get is speed with the oscillating rasp insert. But total control of the shaping still belongs in the hand. While machines can achieve the task faster and more exacting, I find the wonder of hand finishing a wonderful feeling. Guess we both march to different drums. 😄

@phanties 4 ай бұрын

@@Wateringmanyep, I guess we do. It’s funny how BStarCrafts gave a heart to your augmentation to their idea, but you wrote me a book report on why my augmentation of yours was wrong (which started with “Nope”). Your view on modern tools is admirable, though BStar did use a TABLESAW to make this, and I’m assuming you are responding to me on a modern silica chipped device, not something whipped up in the Old Yankee Woodshop. If you are going to be critical you should also be receptive, Geppetto. 😝 🥁 🥁

@Wateringman 4 ай бұрын

@@phanties Most projects that anyone does nowadays are done partially with power tools, and partially with hand tools. I myself have built simple projects with nothing but hand tools, for the purpose of enhancing my skills, and the satisfaction of doing it by hand tools alone. That is my way, and I am entitled to my opinion just as BStar has his, and you have yours. That I extol my views is my opinion. He can agree with me or not. I owe Noone; least of all you; an apology. Just say you don't see it my way, and that I am not you; done deal.

@AdamBechtol Күн бұрын

@@Wateringman Get a hobby, (besides woodworking). Phanties just said what he would use, (nothing about you) and you took it personally and erroneously as a critique of your method. Which normally could be brushed off as a misunderstanding, but you had to go and add that you owed no one an apology (Note, that you were never asked for one) like a petulant twat.

@sergeizhdanov3898 2 ай бұрын

Сразу видно твёрдую руку мастера, работающего с душой и от души!! ✊🏻

@Trap_for_Time 2 ай бұрын

Тут однозначно лайк, за самодельную каретку для Циркуляки - прям кайф, с защитой, направляющей, прям супер!

@underwater4541 4 ай бұрын

Меня как перфекциониста, безумно радует такая идеальная организация мастерской! Это значит, что изделия мастер тоже стремится сделать идеально 😊

@user-dr1my1bb1i 2 ай бұрын

Либо изделия изготавливает одно в год, а остальное время делает подобные приспособы. Ну а семью в таких ситуациях обычно жена содержит🤣🤣

@user-qq1zj6fl9i 2 ай бұрын

@@user-dr1my1bb1iмерзенький комментаришка. Да будет вам известно, что для наработки такой квалификации истрачен не один год жизни. И возможно множество бессонных ночей. А рассуждать так могут только леворукожопики.

@Caviar_in_Dubai 2 ай бұрын

Чистая мастерская это та в которой ничего не делают 😂

@underwater4541 2 ай бұрын

@@Caviar_in_Dubai я не про чистоту, а про организацию рабочего пространства

@Caviar_in_Dubai 2 ай бұрын

@@underwater4541 сам люблю что нибудь по мастерить в свободное время, однако если доводить размещение инструмента, времени на работу не останется

@zoeticcanvasstudios654 Ай бұрын

Awesome organizer. Going to use this design. Handicapped and consolidating my shop for accessibility and to add space for wheelchair. This is exactly what I've been looking. Make more videos.

@user-rt2pw1fl5y 5 ай бұрын

Это круто. Чем больше инструментов, тем больше нужно приспособлений для инструментов. А эти приспособления нужны для того, чтобы сделать новые приспособления для инструментов. 🙂

@user-wj1ze7mw9g 5 ай бұрын

получается замкнутый круг

@Gruntled2001 4 ай бұрын

@@user-wj1ze7mw9g… но вечно увеличивающийся в диаметре 😊 Инструмента много не бывает, бывает просто мало места для его хранения

@alexvaloven4239 4 ай бұрын

Смастерил мастерскую, что бы смастерить что-то для мастерской

@user-yx6yf3kk5y 4 ай бұрын

чтобы смастерить такую полочку, это ж сколько и какого инструмента надо иметь у себя в гараже?

@user-ye9jy9pr3i 4 ай бұрын

😅😅

@mrtablesawful 5 ай бұрын

I don't understand the title of the short, but I love the tool holder. And your shop looks really nice. I'm going to check out more if your videos fore sure!

@cjamesfox 5 ай бұрын

Easy "removable" tool holder? Maybe...

@Pals777 4 ай бұрын

@@cjamesfox Ah yes. Thank you for figuring it out. I had given up.

@karstenbaum4734 2 ай бұрын

Aah thx. @@cjamesfox

@HomeinHI Ай бұрын

Yeah, think it’s a Korean craftsman. Overlooking the language, the work is solid!

@peterjensen6233 5 ай бұрын

That looks great. It’s the one tool with its own hanging hole and you made it more complicated. Still cool.

@hernancvila 5 ай бұрын

Trabajar con todas la gama de herramientas es fácil...

@miket7390 5 ай бұрын

Yeah but if you use the hole it's always the wrench in the back you need never the one in front.

@jeffwalston8110 5 ай бұрын

@@miket7390 Not if you use a peg per wrench. Would take up the same space on the wall at this method, yet still allow you to read the size while they were hanging.

@miket7390 5 ай бұрын

@@jeffwalston8110 aint no way you hanging them on individual hooks with the size facing out and keeping anything near the same size profile.

@michaellewis6569 5 ай бұрын

@@miket7390maybe if they are staggered vertically.

@russelljohnson4527 5 ай бұрын

make one for JUST 10mm wrenches, too. about 12 of them!

@hepparade 4 ай бұрын

I keep telling myself one of these days.... I like your usage of the French cleat. Nice work. Thx for the inspiration.

@canebro1 2 ай бұрын

Plenty of slat wall products out there that basically use the same idea of the french cleat.

@ltgood 5 ай бұрын

This is awesome, I have been looking for an idea like this.

@roodog3761 5 ай бұрын

Nicely done, and a nice wall set-up, too.

@innakorkunova1581 2 ай бұрын

Супер Мастер!!! Супер мастерская!!!👍👍👍🤴🏼

@user-uv8sx4ug9y 5 ай бұрын

Перфекционист во всей красе!.. Ну и советчиков, конечно, которые никогда до такого не дойдут)

@user-ni4wl9gu2i 5 ай бұрын

Ты прав, а то гвоздь забьют в доску и вешают ключи, а так красота.

@RJD0314 5 ай бұрын

Thanks for using all the safety precautions. So many youtubers take such big risks using table saws. I am going to request that you re-shoot this whole video again after you find that missing wrench, though. I may not sleep tonight from thinking about it...😅

@evilkneevilofgermany 4 ай бұрын

Well, that miter sled is other than a safe tool. Should something happen with the workpiece, your hands may get jammed within the „safety“ device itself. In General- Don’t use your fingers holding down workpieces. Make yourself holders for the sled ,please!

@user-xo4hz4rv6n 5 ай бұрын

Как в сказке!!!!! Любо дорого смотреть на умение мастера! Долгая лета!

@Apb1964 5 ай бұрын

Аминь

@InfiniteArt248 2 ай бұрын

I just LOVE professionals❤❤❤❤ Watching them working and creating masterpieces is so satisfying and calming🤗

@JDLarge 4 ай бұрын

Cleats… cleats as far as the eye can see… beautiful and so versatile that you can basically rearrange the entire wall without touching a tool other than what’s on a cleat itself! I did an entire wall like this in my basement wood shop, the garage auto and welding wouldn’t have worked out for the better so that’s in boxes/carts and magnetic strips. Definitely a win in my book using cleats, nice job!👍🏼👍🏼

@BStarCrafts1 4 ай бұрын

Thank you 😊 Have a nice time 🍀

@mariatomko8484 5 ай бұрын

Veľmi šikovný človek!👍

@armandocejacardenas9380 5 ай бұрын

Siempre habrá formas de hacer las cosas diferentes, sobre todo si te enfocas en el tema, estos no son genios pero si son talentosos, creativos, tenaces, trabajadores y con actitud de aportar. Desde Torreón, México.Bravo!

@user-oi1xf3dy4o 3 ай бұрын

Бальзам на душу смотреть на работу мастера .

@robertocamara3793 5 ай бұрын

Brillante! 😃 Gracias por compartirlo!😊 Desde Uruguay 🇺🇾 👋🏼

@dengudwin8435 4 ай бұрын

Это не основной, но один из методов заслуживающий внимания.

@marydelosrios175 3 ай бұрын

Me encanta ❤ esa maestría ,la nobleza del oficio ,la creatividad en convertir la madera en algo útil y preciado. Excelente!!

@user-mr7px4qd7d 11 күн бұрын

Как же мне нравится , когда каждый инструмент на своем месте и порядок в мастерской или в гараже👋👍

@angelogunatilaka1740 4 ай бұрын

Beautifully done ❤

@abcde12345edcba 5 ай бұрын

That's pretty cool. The Great Wall of Tools. Every home should have one. ❤

@user-kg7er4di5h 5 ай бұрын

В умелых руках простые вещи превращаются в произведение искусства. ❤❤❤

@gerardocardozo476 5 ай бұрын

Excelente 👌 trabajo para colocar herramientas amigo. Te felicito 👏. Un saludo desde Argentina

@Globally1201 5 ай бұрын

ACCURATE MEASUREMENTS IS VERY KEY WHEN BUILDING!!! NICE JOB!!!😎👍🏽💯👏🏽

@vojtechkomenda1743 5 ай бұрын

Hezké a účelné 👍 Krásná práce... 🍀

@zxborg9681 5 ай бұрын

Wow, that's a really well though out holder. Great!

@zoelafantaisie9287 2 ай бұрын

That, sir, is a thing of beauty! Well done. Very inspirational.

@papajeff5486 5 ай бұрын

Excellent jig and tool wall. Thanks for sharing, from East Tennessee.

@user-cu3gg4sp7o Ай бұрын

Looks nice and sounds great. At specially last organised sounds!

@francinemiranda8409 12 күн бұрын

Ingenious, and good-looking, too! 👍🏻👍🏻👍🏻

@user-pe1zs2pn4n 5 ай бұрын

Very clever! I love the way you hang everything with the French cleats

@natlee5051 2 ай бұрын

Great Professional work. Thanks for sharing. 🙏

@felixcosta2559 4 ай бұрын

Mais qui ideia genial excelente trabalho, vou fazer também em breve 😂😂

@user-zt5xz5fz4q 2 ай бұрын

Excellent short video.

@twodogsandapicnictable 10 күн бұрын

I just love these guys with all kinds of tools no normal person owns showing how it only takes 100 steps to make something you can just buy for a couple of bucks.

@bartolomeujosedasilva5919 4 ай бұрын

PARABÉNS PELO PROJETO E FERRAMENTAS NUNCA É DIMAIS.

@Gus0046 5 ай бұрын

Excelente!! Buena idea 👏👏👍

@PintuMahakul 4 ай бұрын

👍 An excellent and amazing video. We highly appreciate it. Nice wooden work.

@taironmiranda846 Ай бұрын

Hermoso tu taller y tu trabajo. Gracias por compartir 😃🎉🎉

@franklinfernandez5005 5 ай бұрын

Que buena idea está forma de organizar un tablero con sus herramientas mil felicitaciones siga aportando grandes ideas

@musiqueetmontagne 2 ай бұрын

How nice is that. Design, materials, gorgeous.. 😊

@darrellmckelvie 4 ай бұрын

Love all the tool holders-buttttt…that table saw jig!! 😱😮‍💨☠️

@asif_imtiaz 29 күн бұрын

Really love the beautifully crafted jigs.

@user-yw5fz4gw9z 2 ай бұрын

An other well done job from Andris like your channel fr Canada.

@gurwantsingh5068 3 ай бұрын

Superb, Superb, Superb, Zabardast 🔥🔥🔥🔥🔥

@stepanstepanov8227 5 ай бұрын

Хорошая идея, только подписать размер ключей надо.

@Apb1964 5 ай бұрын

От 2,5 до 37. И ты реально ими пользуешься хотя бы раз в неделю? Всем набором?

@olegs2607 2 ай бұрын

@@Apb1964 потому и подписать, чтоб не забыть какой и где

@occamsrazor7939 Ай бұрын

I sure do like your table saw. I would love to learn to work with my very own table saw.

@joshuasonnen5982 2 ай бұрын

this is so overengineered I love it!

@Mare0912 4 ай бұрын

That's a beautiful design.

@wyattselleck7236 5 ай бұрын

I like it. I like it a lot. 👍

@AhmedAhmed-ro4kj 5 ай бұрын

الله ينور عليك يا باشمهندس

@toomasmetsniit9649 Ай бұрын

Good work ✌️ 🙋‍♂️ 🇪🇪 👍 😊

@Jrome3 4 ай бұрын

Very cool. Nice job.👍

@ReinaldoAlves-fk9em Ай бұрын

Obras incríveissssssss!! Apreciamos seu trabalhooo Parabéns!! Parabéns pelo trabalho de qualidadeee!!

@arnoldartz6445 28 күн бұрын

Well done, I like so much

@hannybassfabricacionydisen8366 5 ай бұрын

Gracias por compartir maximo respeto y mucha vibra positiva 😎

@nonarrativeboxingnunn9856 Ай бұрын

Beautiful Work!

@JohnKatchezoPhiri Ай бұрын

Nice work.Bravoooo!❤❤❤

@user-jt5dd3my9s 4 ай бұрын

Мастерская просто 👍👍👍👍👍👍👍👍👍👍👍

@Fitz-James 2 ай бұрын

Любовь к порядку и эстетики всегда цепляет...супер!...молодец!

@picur237 11 күн бұрын

Very practical and nice 😊

@mihaiduscu07 4 ай бұрын

Wow amazing idea❤

@user-tn3or9py5o 4 ай бұрын

Я тааак внимательно смотрела , а в конце думаю зачем мне это, но результат классный 👌

@bfpenner 4 ай бұрын

Some headless nails in a French cleat backboard works for me. and i can still read the sizes while they are hanging.

@GUIDE_Nico 3 ай бұрын

ASMR for tools is great

@JosedeJesusEspinoVargas 10 күн бұрын

Very good Mr. Genius😅

@albrecht1635 Ай бұрын

Somebody has a lot time! But it's beautiful ❤

@user-is3pk8sk7k 4 ай бұрын

Профессиональная работа! Но для такого оснащения нужно большое помещение.

@triplenickelniner 2 күн бұрын

Nice! I’m getting ready to do something like that with my ratchets. I love making my own tool holders! I subbed for more! 😊

@RocioRodriguez-vq6hn 5 ай бұрын

me gustan sus videos gracias. también observo que herramientas utiliza aunque no tenga.buen trabajó

@BStarCrafts1 5 ай бұрын

🍀💚😊

@gedryan8042 5 ай бұрын

Missing the 10 or the 13? Lol

@BStarCrafts1 5 ай бұрын

😁👌

@ljprep6250 2 ай бұрын

Cute. And I've always loved French cleats, anyway. +2

@MrBuddha974 2 ай бұрын

Awesome idea ❤❤

@laurabyrd9903 2 ай бұрын

How awesome ! Cool great job

@jasonolimer8468 4 ай бұрын

Brilliant idea 👍

@CARVINGART-pr2ql Ай бұрын

Amazing work 🔥

@eshe7460 5 ай бұрын

Amei a organização e facilidade na montagem. Trabalhoso mas recompensador. Ofina dos meus sonhos! 😍

@1monagale 4 ай бұрын

Super Nice 🎉

@Bianchi77 2 ай бұрын

Creative video, thanks :)

@syedmohamedfakraba9502 4 ай бұрын

thank you for this idea

@ejazabidi5734 5 ай бұрын

Very good job.

@jorgearaiza6442 4 ай бұрын

Good thinking man 👍🏼

@Rumyancev_Pro 4 ай бұрын

Красиво) а я на магнитах сделал. Ключи получаются номерами ко мне, подписывать не надо)

@user-dx3ug6bx6m 2 ай бұрын

Bom dia.gostei muito.muito obrigado , parabéns.

@Dudeguymansir 4 ай бұрын

I really like the design of your miter sled

@Dudeguymansir 4 ай бұрын

New subscriber! Holy smokes, it’s like obviously simple. “I could’ve made that!” “But you didn’t, and still haven’t lol so here’s how I did, just in case 😊” Love it, man