Basic Rules of Lapping in Beam Reinforcement Lapping zone in Beams

No video

Basic Rules of Lapping in Beam Reinforcement Lapping zone in Beams

Рет қаралды 5,810

2 жыл бұрын

1) Construction cost of 1000 square feet House 2019? Cost of House Construction per square foot 2019
• Construction cost of 1...
2) Grade Of Concrete and water Cement Ratio
• Grade Of Concrete and ...
3) How to calculate Cement, Sand, and Aggregate for M20 concrete
• How to calculate Cemen...
4) Depth of Footing/Foundation and Reinforcement details in Foundation
• Depth of Footing/Found...
5) Maximum distance between two RCC columns?
• Maximum distance betwe...
6) Big Mistakes in RCC Slab - Lapping Mistakes
• Big Mistakes in RCC Sl...
play Lists :
Construction Videos :
• How to Chose Good Qual...
Construction Site Visit :
• New Exterior Design fo...
House Planning Play List :
• How to Study Column wi...
#CivilEngineers #CivilEngineering

Пікірлер: 12

@brooneil1632 2 жыл бұрын

This is a special presentation and clear as day

@johnmoses3753 2 жыл бұрын

Thanks for the great work

@MasterCivilEngineering 2 жыл бұрын

Good video💯💯🇺🇸

@raphaelpetersamat9897 2 жыл бұрын

Very clear explaination with illustration..great video n keep it up..👍

@rameshmmr4848 2 жыл бұрын

Useful video sir tq

@likeedufun-educationandfun9901 2 жыл бұрын

Thank you very much brother... 🌻

@nelsonhayag6307 2 жыл бұрын

You discuss three coulumn A,B and C Sir splicing on beam from A to B using 12 dia and 16 dia B to C 16 dia what is the basis of lapping length on A to B using different 12mm and 16 mm corrugated bar kindly discuss ill follow

@luimackjohnson302 2 жыл бұрын

Splendid! Another great video. Thank you for sharing this video. Greetings from Papua New Guinea. I am in process of building a 3 storey residential building & contemplating building a 7 storey commercial building later on next to each other on same portion of clayish soil with some rocks & your videos are beneficial! I wish to also build a 7 storey commercial building next to a lake that is inundated with water 3/4 of the year & other traditional houses in the vicinity are on stilts in the village what is your recommendation in terms of foundation, pillars, pylons etc thank you.

@nirbhaykashyap2361 2 жыл бұрын

Sir beam ki liye bhi banao please

@zachleonard258 2 жыл бұрын

Are slabs and beams usually poured monolithically? Does that mean that all steel in the suspended slab is in compression where you lap after l/4, because the beams are the tension members and are so deep? Example, if you have 16 in beam plus 6 in slab on top, a total of 22 inches cross section, the top 11 inches is all compression and bottom 11 must be all tension steel?