Basic stained glass SAFETY TIPS to know ⚠️
Рет қаралды 13,547
Күн бұрынMake it a good year and practice safe stained glass making. We will cover the main safety practices and hazards when working with stained glass. Check out the video and don't lose an eye! 🦺 👁
Welcome to STAINED GLASS DIY 🔮
▶Stained Glass DIY Kits◀
stainedglassdiy.com/shop
Merch bit.ly/merchsg
Buy me a coffee bit.ly/sgdiykofi
SAFETY EQUIPMENT PPE FOR STAINED GLASS:
High temp gloves geni.us/hightempgloves
Cut resistant gloves geni.us/cutresistgloves
Safety glasses geni.us/safetyglasses
Latex gloves geni.us/latexglove
Nitrile gloves geni.us/nitrileglov
Half mask geni.us/3Mhalf
Mask filter geni.us/3Mfilter
Smoke absorber geni.us/smokeabsorber
Ear plugs geni.us/earplugss
If you're a newbie at stained glass, you're at the right place. Check out these links below to learn more:
▶FREE starter guide and 3 feathers pattern◀
stainedglassdiy.com/starter-g...
▶Full beginner tutorial◀
stainedglassdiy.com/how-to/
Want a glass grinder? Save $15 off direct from InlandCraft.com
$15 OFF Inland Craft grinders bit.ly/2Y1Out9
USE CODE: SGDIY at checkout
10% OFF accessories with code SGDIY10, codes can't be combined.
inlandcraft.com/
My current tools kit
kit.co/stainedglassdiy
*********************************************************
✌️ Like my content? You can buy me a coffee! ☕️
ko-fi.com/stainedglassdiy
Connect with me:
➞ allmylinks.com/stainedglassdiy
Learn more at:
www.stainedglassdiy.com
#stainedglassdiy #stainedglass
@StainedGlassDIY 2 жыл бұрын
Any good stories/personal experiences you wanna share about safety?? Reply to this comment. I'll go first 7:22 🔥 Felt that one pretty good through the glove but no burns fortunately 😅
@BellefromOz 2 жыл бұрын
My own tip is go for a face shield or some type of other shield instead of just goggles you use in a lab. I had a small glass shard embed in my eyelid when I was using the proper safety glasses and cause a small skin irritation but it could have been so much worse.
@BellefromOz 2 жыл бұрын
Ooh I have another one. I was using latex gloves with a handheld dremmel and diamond piece. The dremmel caught my glove and ate it, pulling my hand into the dremmel. Luckily it isn't super powerful and I could pull my hand away and break the glove but I did get small bruises from it. Perhaps thicker gloves that won't get pulled into your tools is a better option than latex just for the glass cutting and grinding stage.
@vmpapillon8984 2 жыл бұрын
I actually bought the safety glasses that almost seal to your skin, the ones healthcare workers wear. I used regular safety ones and my eyes got so irritated by the soldering fumes (despite proper ventilation) because I hunch too much over my work. Had an eye infection for a week after, so lesson learned.
@jupiterfive1331 2 жыл бұрын
I haven't yet started since I'm still getting supplies, Glass etc, but I realized no one has ever mentioned the top of Head, Glass in Hair or possibly Ear, collar down Back or Chest, etc. There's so many possibilities of weak defense points in this. I have used a Dremel sanding before and afterwards rubbing neck, it feels like grit along with the smell of metal. After you should Shower or you will likely miss something if grinding, soldering might also depending. We need each time to consider that time individually what we should do to be safe.
@Joe-nu4rm Жыл бұрын
man... i left some bottled kombucha at room tempp too long and it burst open with so much force there were tiny shards of glass in every single wall and the ceiling. thank god no one was in the room, or god forbid one of my pets
@dianesteffen3735 2 жыл бұрын
I would add to your recommendations the need to wear clothing with natural fiber. If solder drops on your legs it will burn right through to your skin and also melt the synthetic clothing and the melted material and solder will stick to your legs and the burn really hurts then. I’ve dropped solder on denim and while it got my attention, it didn’t burn through the clothing and burn and skin.
@StainedGlassDIY 2 жыл бұрын
Denim is great! Thanks for the tip!
@stefani31390 2 жыл бұрын
Great video! Thanks for sharing :) Don’t forget about wearing a mask while grinding. Those microscopic glass particle are no joke on your lungs over time.
@thepatron4663 2 жыл бұрын
Thanks for sharing
@kimbain4368 Жыл бұрын
Great tips! Tfs!
@victoriadominguezz 2 жыл бұрын
Awesome video, great tips! New to stained glass and would love to try it out so this was great information!!! Thank you!!
@sylviaprudhomme5417 2 жыл бұрын
Learned a lot
@julieatkins2946 Жыл бұрын
❤Good video!! Thank you
@lomejordelavidairg.7671 2 жыл бұрын
that's why you are one of my favorite masters in stained glass art thanks my best wishes this new year God bless you
@lindaaudet8659 Жыл бұрын
I wear a full face shield so that no solder balls fly into my eyes or face and gloves to protect my hands and long sleeves. I use a heppa air filter in the window to suck out the flux fumes. I wear the full face shield when grinding.
@remote4719 Жыл бұрын
Great video. Appreciate the time you took to explain. I did subscribe. 👍
@cakkoco 2 жыл бұрын
Thankyou for all anything,... Goodluck from Indonesia 🤩
@GommStainedGlass 2 жыл бұрын
Great Video, it's always good to be reminded about safety. We teach classes in our studio so it's good practice to keep safety glass on because other people might get glass flying. Also, we keep a bottle of lavender essential oil in the shop. It's the best thing for a burn. If a student accidently touches an iron, lavender oil provides immediate relief from the pain of a burn and it has antiseptic properties so it's good for the injury. 🙂🙂🙂
@StainedGlassDIY 2 жыл бұрын
Lavender essential oil ✅ thank you! Stay safe Gomm SG!!
@Joe-nu4rm Жыл бұрын
wow i have never heard of that! i will have to test it against honey. i'm a cook and have avoided burns that would otherwise blister from putting on honey really quickly and leaving on for five to ten minutes. i have no idea how it's so amazing but it's like atching a miracle happen. the skin may still be sensetive or even a little red, but that's a million times better than a painful blistered pussing burn!
@Daffer303 2 жыл бұрын
So happy about this video. Haven’t started yet, and thought I might do it at the dinner table, now thinking I’m moving into the workshop. In my country it’s not legal to work with lead, so you can only get tin solder (with 3% copper), have you any knowledge about safety regarding that?
@shibaweebas 2 жыл бұрын
One thing i noticed was people buying stained glass jewelry. Super unsafe as far as lead poisoning goes. A lot of people fiddle with jewelry while wearing it. Very easy to absentmindedly play with it, then eat, touch your face etc
@jessfavro94 2 жыл бұрын
Super important to check that it is Lead free solder, I agree!
@StainedGlassDIY 2 жыл бұрын
All stained glass jewelry should be lead free solder imo. Thanks for bringing this up!
@shaunhall960 Жыл бұрын
I'm going with the lead free... It's harder to work with but I think it's worth it.
@chingwu5875 2 жыл бұрын
Thank you so much for all the important informations. I will definitely not travel back to France with my newly purchased liquid flux. 🙏
@lindz4166 Жыл бұрын
Hey! I’m trying to purchase one of your T-shirts but the link is broken 😫😮 Stained glass is my life, so this is beyond perfect! I’ll keep an eye and hope for the best. Thanks for the great videos, always very inspiring to see a fellow sg artist also killing it!! 🙏🏼💜🤩✨
@Dan-ji4db 2 жыл бұрын
I had an iron in one hand and was adjusting something with the other and touched it to my finger. Wowwee did it hurt. Good tips!
@StainedGlassDIY 2 жыл бұрын
Good your senses are working properly!
@willardbreedlove7028 2 жыл бұрын
I'm glad you did this video I got one of my eyes nearly put out by a boy He thew a rock and hit my left eye and too this day I am very safe when it comes to my eyes. They are the only eyes you will get so everyone be safe.
@StainedGlassDIY 2 жыл бұрын
Better safe than sorry. Glad it wasn't worse for you.
@maskcollector6949 Жыл бұрын
There are Non-Lead based solders that I highly recommend looking into. Lead is great for electronics (look up NASA's youtube tutorial on soldering) and works very well but I think tin/silver or nickel solder is what I'll be buying next, currently transitioning away from it. I'll keep some lead solder around as needed but honestly I think it's just best for human health to move away from that. Still figuring out exactly what is the strongest alternative.
@emilytupper8773 Жыл бұрын
Hey there! i'm a beginner with stained glass and working with lead makes me a bit nervous. I've been hearing about lead-free solder but seeing a lot of mixed reviews. have you found any that work for you?!
@namratasharma6424 2 жыл бұрын
Hello sir very informative video you have shared which is very helpful for all . Thank you so much. Sir I want to know how you clean the minute particals of glasses which shattered in & near platform??? Because after grinding it will be very difficult
@StainedGlassDIY 2 жыл бұрын
I use a brush and sweep as best as I can without kicking up dust. You can use a grid for cutting or cut on a wood/plastic sheet to remove and clean.
@JCbeeQueen Жыл бұрын
Safety is so important...
@yvonneschimmel453 2 жыл бұрын
How do you store your glass?
@nancyschaillee7656 2 жыл бұрын
I've scared myself when the grinder seemed to kick back the glass, sending it flying out of my hand :p Also, I've started incorporating wire into my work and man, does the wire get hot! Really need gloves for that!
@StainedGlassDIY 2 жыл бұрын
Gloves are great protection! 🧤
@oztilson 2 жыл бұрын
Thank you so much. I love your videos and was quick to hit the subscribe button. I am a quilter and portrait artist. I have one great workspace that I use for both of those pursuits. I am really interested in stained glass. Can I do this in my current workspace or will it leave bits of glass everywhere and be problematic for other activities in the same space?
@StainedGlassDIY Жыл бұрын
It can get messy and it's best to not mix imo
@marandjoe Жыл бұрын
Just my 2 cents , but I'd never try and share stained glass space with quilting space. The tiniest tiniest little shards of glass can be found even after I thought I had cleaned up well! I moved my quilting stuff to a different area. I'm seriously considering a she shed :)
@user-tf1oo9rj6u 9 ай бұрын
Glass dust is a thing. Personally, I wouldn't break or grind glass in the house (cement garage is fine). Just like dropping and breaking a glass in your kitchen, you will be surprised when weeks later (after you've cleaned many times) you catch a glint, and oh, there's another piece of glass that was hiding.
@user-tf1oo9rj6u 9 ай бұрын
You didn't mention shoes and tracking glass bits. Also, isn't glass dust supposed to be very bad to breath? (grinding or sanding)
@Alexandra-ks7cb 3 ай бұрын
how do you clean your work space? do you just use a shop vac? Do you use a special filter or bag to contain the glass slivers/dust/shards? Also work surface. Is it just plywood? I'm trying to think about a cheap board I can put on top of the workbench in a shared space that i can remove after i'm done a work session. I don't want to give anyone lead poisoning or glass slivers. Awesome channel!
@StainedGlassDIY 2 ай бұрын
I use a regular shop vac. No special filters. Plywood is just fine and works great!
@SamuraiSunshine00 Ай бұрын
Can you get lead poisoning from doing lead and glass
@libbycoleman3153 Жыл бұрын
Is finished stained glass safe to touch because of the solder or should you not touch it/ wash your hands after touching the finished piece?
@StainedGlassDIY Жыл бұрын
You can safely touch it and handle it. Just wash your hands after so you dont transfer lead and ingest.
@Kelseybeee 2 жыл бұрын
Have you ever accidentally dipped your soldering iron into the flux? I’m afraid if what would happen. I just started doing stained glass this week and I’ve come close a bunch of times already! I get mixed up switching between the flux brush and the iron.
@StainedGlassDIY 2 жыл бұрын
Ha actually you can dip it in the flux and that will clean out the soldering iron tip from some corrosion! But best to be safe and take it slow!✌️
@Kelseybeee 2 жыл бұрын
@@StainedGlassDIY thanks for the tip!
@jacquesomersavard7257 Жыл бұрын
at 8min 22 you use a grinder whitout any pusher ;commercial pousher existe but; aesy to do whit a 2liter coke botle and a lobster rubber blue one are ok and push safty jakc 47 71
@yvonneschimmel453 2 жыл бұрын
Your safety glasses don’t have protection on the side of your eyes. You need better protective glasses
PADLOTOON
Рет қаралды 34 МЛН
Fabiosa Animated
Рет қаралды 10 МЛН
Stained Glass with Shannie-Mountain Woman Products
Рет қаралды 2,4 М.
Julie Weilbacher
Рет қаралды 28 М.
Ruslan Bogdanov
Рет қаралды 3,6 МЛН