@brandonjones7286 2 жыл бұрын
How does your buckshot compare to the factory stuff as far as hardness? Is it relatively the same or is one harder than the other?
@rogeradkins9146 2 жыл бұрын
It's harder then there lead pellets but isn't as hard as copper or nickel plated
@smsgtbulldog 2 жыл бұрын
Roger, what colors are you using for which caliber? I know you use blue for 00 buck, what about the other sizes?
@rogeradkins9146 2 жыл бұрын
Purple is single 0, red is .29 cal # 1 ,pink is .35 cal 00, an green is .30 cal # 1 +
@smsgtbulldog 2 жыл бұрын
@@rogeradkins9146 so is light blue 33 cal 00 buck?
@smsgtbulldog 2 жыл бұрын
@@rogeradkins9146 do you coat #4 buck at all??
@rogeradkins9146 2 жыл бұрын
No .33 is just graphite an I don't cast # 4 buck
@smsgtbulldog 2 жыл бұрын
Ok, what size is your light blue then?? I hope I’m not making a pain of myself.
@jakeaddy1742 2 жыл бұрын
I’m loading on a lee load all 2 what would be a good step up from that I’m not goin to be loading a lot mostly just family. Thanks
@rogeradkins9146 2 жыл бұрын
A mec 600 Jr but if I could I'd get a roll crimp tool an a drill press, they make great shells
@jakeaddy1742 2 жыл бұрын
@@rogeradkins9146 I just put together my small drill press from harbor freight and my roll crimp tool came in also thanks for the response and your time
Roger Adkins
Рет қаралды 1 М.
Dman1407
Рет қаралды 45
D.Machinery
Рет қаралды 381 М.
GoldNoob - Prospecting Texas!
Рет қаралды 690
Roger Adkins
Рет қаралды 793