Bathroom Renovation- Drywall Taping- 1st and 2nd coat (Part 1)

Рет қаралды 532,148

9 жыл бұрын

Purchase My recomended Tools, Brushes, Paints, and Primer's Here: www.amazon.com/shop/russolina...
Bathroom Renovation- Drywall Taping- 1st and 2nd coat (Part 1)
www.russolinatzpainting.com
In this video, I show you how to drywall tape (1st and 2nd Coat) a newly installed piece of drywall that has a wide gap. I profile the drywall Butt joint and drywall factory joints. I pre-fill or pack the gap first with a Setting type mud (Plaster of Paris mixed with USG All Purpose joint compound). This not only fills the gap, but also creates a smoother surface to tape to and allows the drywall paper tape to embed to a more even surface, resulting in less bubbling. I also fill the drywall screw holes and fix some other imperfections in the old drywall using the Plaster of Paris quick set mud. I use a Hyde drywall Hawk and a 12 inch Marshalltown Trowel to apply the drywall compound.
Like me on Facebook! / russolinatzpaintingllc
My Website! www.russolinatzpainting.com
Follow Me on Twitter! / russolinatz
Follow me on Pinterest! / russolinatz
The Russ Olinatz Painting Show offers you How to tips and demonstrations for Interior House Painting and Exterior Painting I will show you Interior painting tips for dealing with Wallpaper Removal, Sheetrock Repairs, Skim Coating Tips and Techniques , Door Repair with Car Bondo, Deck Maintenance, Deck Sanding, Pressure Washing, Power Washing, Wood Staining, Mold Removal/Killing, Cabinet Painting, Caulking Tips, Smooth out textured Walls, Painting over Varnished Trim, Sheetrock Taping, Prepare and Paint New Crown Molding, How to Strain 5 Gallon paint, Ceiling Repair, Popcorn Ceiling Repair, Paint over Wallpaper, Chalkboard Paint, How to Mix Joint Compound. Home Improvement, drywall taping

Пікірлер: 280

@RussOlinatzPaintShow 5 жыл бұрын

Purchase My recommended Tools, Brushes, Paints, and Primer's Here: www.amazon.com/shop/russolinatzpaintshow

@justchill10 7 жыл бұрын

good stuff, guy. teaching is perhaps one of the hardest things to do in this world. and to do it with a slight stutter is even more commendable. keep up the good work!

@RussOlinatzPaintShow 7 жыл бұрын

Hi- Thank you very Much! I appreciate that! Where you from? Russ

@RickDaGoat89 Жыл бұрын

Man stfu you could have keep that comment to yourself clown

@sixpackbinky 6 жыл бұрын

This is the kind of video I have been looking for. I have these problems in my mobile home. I am a woman that has never done any dry walling and will have to do this myself , so I am getting all the info I can. Thank you for sharing your knowledge, I will be using it.

@andreamichelle1 5 жыл бұрын

We removed a shelf from our laundry room and now it looks like that wall. Ready for this reno to be over!

@malcyn1 8 жыл бұрын

Great video. We are renovating our bathroom and this was a big help.

@joeobrien6585 5 жыл бұрын

Good Job man! As a contractor I know how difficult it can be to teach people and I thought you did a good job. For a newbie trying to learn or a weekend warrior your are awesome. If you are trying to get the pros I'd cut that video in half. But job well done brother. I appreciate you! Joe Four Leaf Contracting Dallas Milwaukee

@CRAZDSBIGGESTFAN 3 жыл бұрын

Who'd have known trudeau was a friggin drywaller of all trades. What a stand up citizen mr trudy

@waynehuffer6730 4 жыл бұрын

Hey Russ. Thank you for your DO diligence. I appreciate your feedback. I like your videos because you attack and air all problems. Most drywall KZfaq videos do not show the variety of problems you encounter and repair. I think some would consider pre-filling damaged edges, in lieu of replacing damaged sections, as bad publicity; but on the contrary, these are issues DIY'ers WANT/NEED TO SEE, and what works and what does not work. So thank you very much..... Wayne

@RussOlinatzPaintShow 4 жыл бұрын

Hi Wayne Thanks for your words. Pre filling with quik set mud is a must. It sets fast and can be re coated in 10 minutes. Russ

@jeffebner6701 5 жыл бұрын

Good job. Vacuuming really makes it stick better.

@brandeedavewaters2365 5 жыл бұрын

Just did our bathroom reno using this technique--incredible results. Thanks for sharing!

@RussOlinatzPaintShow 5 жыл бұрын

Hello Brandee & Dave- I'm glad your bathroom came out Incredible! Thanks for letting me know! Russ

@dannyketterer5221 6 жыл бұрын

Dude you are awesome thank you so much for going deep into detail, i have never mudded before but did a good job my first time trying because of your videos. Im in new york originally from ohio, please keep making videos to teach you really are a great teacher

@RussOlinatzPaintShow 6 жыл бұрын

Hi Danny- Thank you for your feedback! Your wish is my command! Russ

@HeinzP100 9 жыл бұрын

Man, gave me quite the start at the 1:40 mark. Going along viewing the layout, than Bam! there you are. Lol. Looks like you have a major project ahead. Glad we'll be along for the ride.

@RussOlinatzPaintShow 9 жыл бұрын

Lol! Thanks!

@julesfumerton3918 4 жыл бұрын

Great tips. You did a fantastic job on the renovation and the video. 👌 Thanks for sharing.

@RussOlinatzPaintShow 4 жыл бұрын

Thank you Jules!

@TheFourOfNine44 9 жыл бұрын

Look forward to the next episode.

@RussOlinatzPaintShow 9 жыл бұрын

Thanks J!

@TheFourOfNine44 9 жыл бұрын

Jacinta xX.

@mott0mottO 6 жыл бұрын

Solid tips dude! 👍😁👍 Please continue to do more vids

@RussOlinatzPaintShow 6 жыл бұрын

Thank you very Much!

@susanwalker8539 5 жыл бұрын

i could tell just from the first moments that you are meticulous and professional and very knowledgeable. I learned a lot.

@RussOlinatzPaintShow 5 жыл бұрын

Hi Susan- Thank you so much for your kind comment! I really appreciate it! Russ

@puddintym 4 жыл бұрын

a very nice teacher to listen to and i appreciate his time.... thank you very much sir!!

@RussOlinatzPaintShow 4 жыл бұрын

Hi Thanks for your positive feedback, and thank you for taking the time to comment! Russ

@bstein9500 3 жыл бұрын

Exceptional. Watched them all. Really a pile of little hints on here.

@RussOlinatzPaintShow 3 жыл бұрын

Thank you!

@abigailmogensenevans4520 6 жыл бұрын

Dude - you are my hero! Thank you for such clear, thourough, and detailed instructions! I am actually mostly done with my attempt to repair the drywall around the tub/shower insert in our bathroom. I used regular drywall mud to fill a gap made when I removed about an inch of water damaged drywall around the top edge of the insert (I guess the old caulk failed?). My plan was to imbed 2” mesh tape over the filled gap, next. Do I need to knock out the mud I used and refill the gap with plaster mixed in the mud, instead, or do you recommend some other approach to repair it?Thanks for any help or suggestions! (Hello from the Nashville, TN area!)

@abigailmogensenevans4520 6 жыл бұрын

Done! Thank you!

@lanne2525 6 жыл бұрын

You are awesome! This really helped me with my project

@RussOlinatzPaintShow 6 жыл бұрын

Thank you very Much! I really appreciate it!

@HardRockMiner 6 жыл бұрын

I've been doing this work for years and this is a great video. Seriously awesome job.

@RussOlinatzPaintShow 6 жыл бұрын

Hi Thanks for your Comment! Where you from? Russ

@HardRockMiner 6 жыл бұрын

RussOlinatzPaintShow - Vancouver Island, Canada.

@RussOlinatzPaintShow 6 жыл бұрын

Nice! What kind of mud do you use?

@HardRockMiner 6 жыл бұрын

RussOlinatzPaintShow - Quick Set Dust Control.

@richis9070 7 жыл бұрын

I like your videos mate..keep it up

@RussOlinatzPaintShow 7 жыл бұрын

Hi Richi Thank you! Where you from? Russ

@krissphillips6202 5 жыл бұрын

Great video

@RussOlinatzPaintShow 5 жыл бұрын

Thanks Kriss!

@rcronin1 4 жыл бұрын

Thank you this is exactly what I was looking for. :)

@RussOlinatzPaintShow 4 жыл бұрын

Thanks Rebecca! Do you have a similar situation? Russ

@misterhabs3126 7 жыл бұрын

thanks a bunch man, great videos. keep it up dude

@RussOlinatzPaintShow 7 жыл бұрын

Thank you for your support! It's much appreciated!

@KeliKeener 6 жыл бұрын

Ditto, this was very helpful! Thanks for posting. -Richmond, Va

@RussOlinatzPaintShow 6 жыл бұрын

Hello Keli- Thanks for taking the time to comment! Did you already do your project? Russ

@KeliKeener 6 жыл бұрын

Ha! Heck no; I've been procrastinating on it for over a year now. :( Can you come to Richmond??

@RussOlinatzPaintShow 6 жыл бұрын

Is it warm there?

@KeliKeener 6 жыл бұрын

Of course not. Virginia weather is the pits.

@KingTonyLuna 3 жыл бұрын

Goodjob bro !

@RussOlinatzPaintShow 3 жыл бұрын

Thank you David!

@garymeroff3297 2 жыл бұрын

thanks for the very informative video. Good job buddy

@RussOlinatzPaintShow 2 жыл бұрын

Thank you Gary!

@JJ-bv7fy 4 жыл бұрын

2019 and what a great video, very informative and great tips. Thank you!

@RussOlinatzPaintShow 4 жыл бұрын

Thanks JJ!

@Zandar89 3 жыл бұрын

Awesome video thank you for the help!

@RussOlinatzPaintShow 3 жыл бұрын

Your welcome!

@sioerono 3 жыл бұрын

I always like your videos!

@RussOlinatzPaintShow 3 жыл бұрын

Thank you Eron!

@therealoscargonzalez 5 жыл бұрын

GOOD JOB!!! KEEP IT UP!!!

@RussOlinatzPaintShow 5 жыл бұрын

Thanks!

@therealoscargonzalez 5 жыл бұрын

Subbed!!!

@RussOlinatzPaintShow 5 жыл бұрын

Thanks Oscar!

@AltruisticWarrior Жыл бұрын

I'm a great drywaller but a terrible taper, it's an art. One thing I can say, a good drywaller always takes into consideration making a clean job for the tapers... especially if they were using a taping gun. Set those screws and try to keep gaps to 1/8th. The tapers will love you for it.

@RussOlinatzPaintShow Жыл бұрын

Yes I totally agree!

@nikond90 2 жыл бұрын

great video

@RussOlinatzPaintShow 2 жыл бұрын

Thank you!

@cutbertogonzalez6664 6 жыл бұрын

Good stuff

@RussOlinatzPaintShow 6 жыл бұрын

Thank you Cutberto!

@ShaneKarma376 8 жыл бұрын

What did they cut that with, a spoon?

@nathanelwood1279 3 жыл бұрын

Thank you SOOOO much! I am a new home owner with some drywall projects and I’ve watched quite a few how-to videos. This one has been the most helpful for me. Thanks!

@RussOlinatzPaintShow 3 жыл бұрын

Hello Nathan Thank you very Much! Please let me know how you make out? Russ

@gloriachristian9042 5 жыл бұрын

Awesome, helped Me.

@jonathangee9348 3 жыл бұрын

Great tips!

@RussOlinatzPaintShow 3 жыл бұрын

Thanks Jonathan!

@monstertracks4452 Жыл бұрын

Thank you for the video

@RussOlinatzPaintShow Жыл бұрын

Thank you!

@rjcargus 9 жыл бұрын

I though I was going to see coats one and two .... but still love all your video's .

@RussOlinatzPaintShow 9 жыл бұрын

Hi Janine- Thanks a lot! This is (Part 1). Russ

@jamesdean3734 5 жыл бұрын

I have a gap like that, but mine is on my ceiling. Would I follow the same steps to prefill? Thanks for your videos. They really help!

@RussOlinatzPaintShow 5 жыл бұрын

Hi James I have a video series that I just completed that will help you with your ceiling gap to fill and level. kzfaq.info/sun/PL5rEfkvkrCQ9tCRJyr3j2OFmt1ALU-lbQ

@MrAlittle5150 8 жыл бұрын

I notice you made your mud pie on what looks like a piece of painted plywood. Dose it matter? I was going to use an piece of drywall or will that suck the moisture out of the mix? Thanks Mike

@RussOlinatzPaintShow 8 жыл бұрын

+MrAlittle5150 Hi Mike - You can use whatever you want. Just try not to let water sit too long with adding the plaster of Paris. Thanks for your question Russ

@michaelnc4450 10 ай бұрын

Great post thx! 😎👍

@RussOlinatzPaintShow 10 ай бұрын

Thanks!

@JBIRD575 6 жыл бұрын

Nice videos

@RussOlinatzPaintShow 6 жыл бұрын

Thanks JBIRD!

@BurtBowers Жыл бұрын

I had similar issues going on where my vanity is I had a pin hole leak in a pipe in the wall so had to cut out almost a 2'x2' square cut in the plaster wall after repairing all the plumbing I decided to cut thin piece of plywood anchored it to the wall with drywall screws but before I did that I had to use small drywall piece to one side of the 2'x2' hole but filled it in with plaster patch sanded out smoth on the edges turned out good but I didn't want to seal up the 2'x2' section so I could keep an eye on the pipes, my vanity hides the wood panel so I am fine with that.

@RussOlinatzPaintShow Жыл бұрын

Yes best not to patch up completely!

@jkthugz9945 4 жыл бұрын

Thanks for the video! So I need some hardener in the mix not just the compound? Also are the drywall patches good for a say 2-3in hole.

@RussOlinatzPaintShow 4 жыл бұрын

Hi The plaster of Paris turns All Purpose Joint Compound into a setting mud! You can use those drywall patches for 2-3 inch holes. What are the holes from? Russ

@jkthugz9945 4 жыл бұрын

@@RussOlinatzPaintShow thanks for the reply! It is just a corner in ceiling that I had to take off because it was loose and broken and there is no stud behind that section

@RussOlinatzPaintShow 4 жыл бұрын

Hi Can you please LIKE my Facebook paint page and post your Nice Comment to my wall along with a picture of the hole so others can learn? m.facebook.com/russolinatzpaintingllc

@jkthugz9945 4 жыл бұрын

@@RussOlinatzPaintShow Sure thing I'll take some pictures before and after maybe unless I gotta tear it all out haha

@rosewexler6966 3 жыл бұрын

I want to see more. Had a guy do my bedroom completely over, he started at bottom in putting up the sheets ,I have gaps on top ,so places there over muddling, it was a bad job. Need to fix.

@RussOlinatzPaintShow 3 жыл бұрын

Hi Rose So you have a similar situation to this project? Russ

@katytoro5615 6 жыл бұрын

I like that you explain each step....including the "wiggling the trowel at the corners.. you made it easy for my home projects. Katy

@RussOlinatzPaintShow 6 жыл бұрын

Hi Katy Your words really mean a lot to me! Thank you very Much! I am glad my videos have helped you in your home projects. Where you from? Russ

@reyntakemori2048 6 жыл бұрын

Hardener? What’s the hardener for? All purpose joint compound has adhesive in it (glue).

@RussOlinatzPaintShow 6 жыл бұрын

Hi Reyn It makes The Allpurpose Mud set in 10 minutes. This allows me to do several coats in one day. It also makes the allpurpose mud a lot stronger. Russ

@bluekeet 8 жыл бұрын

i subscribed because I also stutter like you do, and you seem like an amiable guy.

@RussOlinatzPaintShow 8 жыл бұрын

+bluekeet Hi- Thanks a lot! Where you from? Russ

@bluekeet 8 жыл бұрын

+RussOlinatzPaintShow sorry for the late reply, but been busy. I am from the bay area, California.

@RussOlinatzPaintShow 8 жыл бұрын

+bluekeet Nice! Thanks for your response!

@shirleebrown1647 6 жыл бұрын

lol.me 2

@ts8024 4 жыл бұрын

My son also stutters

@Giove83 6 жыл бұрын

Nice little video pal I'm just doing my loft I'm plasterboarding it now.in the end it will save me thousands if I was to pay a professional and iv done it from picking up tips in videos like this 👍

@RussOlinatzPaintShow 6 жыл бұрын

Hi Marco Nice! I’m glad you will be taking on this project. Let me know how you make out? Russ

@stevew.wheeler9852 6 жыл бұрын

Great job Russ. Best drywall education I have ever had, very thorough. On repairs of this nature, do you add the plaster of paris only to the first couple layers to fill in the joints, or are you using that mix for all coats?

@RussOlinatzPaintShow 6 жыл бұрын

Hi Steve I really appreciate your comment and question. Just use the plaster of Paris for your first few coats. Then use just what ever topping mud. I just use All Purpose mud because it sands more easily and I can speed up its drying time. Again, I can also add plaster of Paris to it, which greatly increases your productivity in a short amount of time. Where you from ? Russ

@stevew.wheeler9852 6 жыл бұрын

Thanks Russ. I am in Santa Barbara, CA. My experience with drywallers here has been very poor, so I do small jobs myself. Is Fix all also something that can be mixed, or do you just recommend Plaster of Paris?

@RussOlinatzPaintShow 6 жыл бұрын

Hi Steve What do you mean by Fix? Russ

@stevew.wheeler9852 6 жыл бұрын

Sorry, meant Fix All, which is similar to plaster of paris

@RussOlinatzPaintShow 6 жыл бұрын

Hi Steve- just use the plaster of paris. Russ

@karlab9557 5 жыл бұрын

I wonder what is the difference between your mix with drywall compound and plaster of paris, and the dry mix you get in a bag that you add water to? It dries quickly and sets by chemical reaction rather than just drying in the air. Would this be the same thing sortof?

@RussOlinatzPaintShow 5 жыл бұрын

Hi Karla They both are setting compounds. They both set quickly? And then have to dry. But, after it sets, you can do another coat, unlike just using All purpose, where you have to wait till it dries completely. Russ

@karlab9557 5 жыл бұрын

Thanks so much. I'm having to do some DIY and your videos are very helpful. Beautiful job

@RussOlinatzPaintShow 5 жыл бұрын

Thanks Karla! Where you from?

@karlab9557 5 жыл бұрын

Ohio

@zacharywood2582 3 жыл бұрын

NIce man!

@RussOlinatzPaintShow 3 жыл бұрын

Thank you Zachary!

@eadl714 5 жыл бұрын

Russ from the looks of your instagram site your having a great summer, enjoy. I have a professional question for you if I may, I'm getting ready to paint my bathroom , its a small area cause I had most of the bathroom tiled. I have never had any luck with using semi-gloss or high gloss paint on walls, on woodwork never a problem . I've already spackled all the imperfections and primed it with Zittzer primer "its covers all sins, its the best. Now in the past when Ive used semi-gloss on walls when its dried it looks streaky when the light shines on it. I have a good china bristle purdy brush for the cut out and bought a good non shed roller, and the paint which was suggested to me by the guy at home depot is "BEHR paint & primer all in one, Interior Semi Gloss Enamel. The color I'm using is very light grey covering beige. Do you have any pearls of wisdom on how to roll this paint on without any streaks?? Thanks, Ed

@RussOlinatzPaintShow 5 жыл бұрын

Hi Ed - Thanks for your questions. Make sure to prime the whole wall again with the primer. Is the primer the Zinsser Bulls Eye 123? Russ

@eadl714 5 жыл бұрын

Russ, thanks for responding. Yes it is Zinsser Bullseye 123 water based interior/exterior primer that I used to prime over all the spackled nail holes and imperfections. So you want me to give it another coat of Zinsser primer, not a problem. Russ, you are aware that the Behr paint is Paint/Primer all in one interior semi gloss enamel. Not to jump topics but last year I painted the garage door, its one of the rolling steel doors like the ones that cover store windows in the ghetto, well i cleaned it up and painted it with oil base Rustleum and in 6 months it all pealed off. Then I did it over and I sanded all the rustleum off and primed it with Zinsser bullseye and repainted it with good latex paint and it looks great. The reason it peeled off is because the door was GALVANIZED. Thant's again Russ enjoy the rest of the summer. Ed

@eadl714 5 жыл бұрын

Russ, have you ever considered teaching the trades at a vo-technical high school? you would be an excellent teacher with vast knowledge of skills to share with today's youth.

@RussOlinatzPaintShow 5 жыл бұрын

Hi Ed- Thanks for sharing that! Yes, I am aware of the Behr paint is a Paint/Primer. Whenever you work with high sheen paint, you had better create a totally sealed, even surface to apply it on top of. Otherwise, you will see flashing and texture differences from where the repairs where. Also, the more you prime, the more you build up a roller texture to match the existing to further hide where you prepared. Paint/Primers are great paints to use, when going over an already painted surface. They adhere well and cover better than existing paints. Anytime there is joint compound in use, its basically like chalk, so its going to suck in what ever you put on top of it. I coat of primer isn't enough a lot of times. Prime twice, helps keep the doctor away. Russ

@eadl714 5 жыл бұрын

Russ, Thanks for the advice. I will hit it with another coat of Zinsser.

@malyndapointdujour8770 3 жыл бұрын

I have a drywall hole with a textured wall. Do I have to use joint compound with the plaster?

@RussOlinatzPaintShow 3 жыл бұрын

Hi You could to speed up the process! You can do multiple coats in 1 day. Where you from? Russ

@malyndapointdujour8770 3 жыл бұрын

@@RussOlinatzPaintShow I'm am from Miami Florida

@RussOlinatzPaintShow 3 жыл бұрын

Hi I would use the fast setting compound for at least the first 3 coats and then just all purpose compound for last coat and texture. What texture do you have to match? Russ

@129dannytran Жыл бұрын

Hey man, thanks for the great video. What brand plaster repair is that in the video?

@RussOlinatzPaintShow Жыл бұрын

Thanks! I added Plaster of Paris to All Purpose Joint Compound!

@129dannytran Жыл бұрын

@@RussOlinatzPaintShow thanks man!

@RussOlinatzPaintShow Жыл бұрын

No problem!

@129dannytran Жыл бұрын

@RussOlinatzPaintShow wait you added premixed joint compound with plaster of paris DRY all purpose joint compound? They are both all-purpose joint Compound? Just want to make sure I'm buying the right stuff, lol. Thanks, man! You make it look easy.

@RussOlinatzPaintShow Жыл бұрын

Hi I mixed USG green top All Purpose Joint Compound with DAP Plaster of Paris.

@derekiu61 3 жыл бұрын

Thank you.

@RussOlinatzPaintShow 3 жыл бұрын

I appreciate your words! Where are u from?

@JacaboBlanco 2 жыл бұрын

Trying to fix my drywall in my garage. Tape down the middle and side middle of the wall. It's awful. How do you fix that???? Wish I could send you a picture. All the tqpe repair videos are of ceiling joint tape repairs.

@RussOlinatzPaintShow 2 жыл бұрын

Hi Jacobo Can you please LIKE my Facebook paint page and post your comment to my Wall so others can learn also? facebook.com/russolinatzpaintingllc

@JacaboBlanco 2 жыл бұрын

@@RussOlinatzPaintShow if you help me fix my stinking tape issue 😭😭😭

@RussOlinatzPaintShow 2 жыл бұрын

@@JacaboBlanco yes post message and pics to my wall

@jasonweishaupt1828 4 жыл бұрын

When I drywall patch I shoot for no gaps wider than about an 1/8th of an inch.

@RussOlinatzPaintShow 4 жыл бұрын

Yes that's what you want to do.

@jimmyjennings4089 4 жыл бұрын

I always called it hot mud, it works in stucco to and you can paint the same day neeto ain't it?

@RussOlinatzPaintShow 4 жыл бұрын

Hi Jimmy Yes it is! Where u from? Russ

@jimmyjennings4089 4 жыл бұрын

@@RussOlinatzPaintShow I live in Mesa AZ.

@NoeliaNiar 9 жыл бұрын

so nice,great,love it dear,many thanks..

@RussOlinatzPaintShow 9 жыл бұрын

Thank you!

@frenchfilmmtheband2556 9 ай бұрын

Could you have used pre fill also ?

@RussOlinatzPaintShow 9 ай бұрын

What’s pre fill?

@rickytowne8963 Жыл бұрын

party Rings went out in the 1600s get a drywall pan some hot mud makes plaster of Paris...

@RussOlinatzPaintShow 5 ай бұрын

You don’t like a hawk?

@boashna 6 жыл бұрын

good job .. I checked the haters accounts and I don't see them sharing any video go figure ..they don't have any talent please give me the plaster mix again brand and spelling

@RussOlinatzPaintShow 6 жыл бұрын

Hello Thanks for your comment! The plaster of Paris is made by Dap. www.dap.com/dap-products-ph/plaster-of-paris-dry-mix/ Russ

@thursday0186 3 жыл бұрын

Is that a stutter or were just hanging out with Mitch McConnell

@RussOlinatzPaintShow 2 жыл бұрын

Both!

@mashhoodalvi6305 3 жыл бұрын

Can you please how can I remove wall papers from my bathroom walls

@RussOlinatzPaintShow 3 жыл бұрын

Hi I have some videos! Russ

@judithlewis8597 4 жыл бұрын

How do you fix a hump on the wall

@russolinatz4920 4 жыл бұрын

Hi Judith- I have a video of that on my other channel. Russ

@jamesallenyz431 7 жыл бұрын

just put it right hair, then mix it up hair. thumbs up, thanks for the tips

@RussOlinatzPaintShow 7 жыл бұрын

Thank you James!

@josephsalinas6312 2 жыл бұрын

Fantastic series of videos! Thank you for your content…. Now let’s see if I can replicate you! 😎

@RussOlinatzPaintShow 2 жыл бұрын

Thank you Joseph!

@grazianodeluca73 6 жыл бұрын

why don't use 20 minutes mud or a 5 minutes mud?

@RussOlinatzPaintShow 6 жыл бұрын

Hi Graziano Because I don’t like to clean the drill or bucket for smaller projects. With the mud pie, I have no clean up. If I’m doing a larger project , then I will use drill and bucket. Where are you from? Russ

@BN-xj8wr 6 жыл бұрын

20 MINUTE CAN BE MIXED IN A PAN... WOULDNT NEED MORE THEN 2 OR 3 PANS FOR THIS JOB. CHEERS

@RussOlinatzPaintShow 6 жыл бұрын

Yes you are right. I don’t use mud pans. I prefer to use a hawk.

@WickedG5150 5 жыл бұрын

RussOlinatzPaintShow Dumb. The mud pan is for grown people.

@WickedG5150 5 жыл бұрын

Its called mud, not plaster, you dipshit.

@tweedie2100 6 жыл бұрын

JUST USE QUICK SET, HOT MUD

@DJ-jb6bf 5 жыл бұрын

What is the approximate set time using this mud mixture?

@RussOlinatzPaintShow 5 жыл бұрын

D J 10 minutes

@DJ-jb6bf 5 жыл бұрын

Wow, that's a bit too fast for me. Can the set time be increased by using less plaster of paris?

@RussOlinatzPaintShow 5 жыл бұрын

D J Yes, Indeed!

@DJ-jb6bf 5 жыл бұрын

Could the same effect be achieved by using hot mud mixed with all purpose in place of p.o.p.? Just as in this series of videos where you didn't install the drywall, I'm dealing with the same thing. However, I have a few long joints that aren't flush because the existing drywall is 5/8" + outside corner bead + mud and the new is 1/2" with the recessed edge. Shims weren't used like they should have been so I've got at least 1/2" difference to fill in and taper out, which takes a ton of mud and a ton of set time. Not sure if that makes sense or not... There was a closet with the sliding doors that was abandoned and new drywall put across to make just one solid wall. That's why there's corner bead... Your feedback is very much appreciated.

@RussOlinatzPaintShow 5 жыл бұрын

Hi Thanks for your question? Due to the uneven drywall, you need to level it out with mud. What size taping knife are you comfortable with? Russ

@shawnbayking260 4 жыл бұрын

Why not just some regular old 20 or 45 mix and a taping pan

@RussOlinatzPaintShow 4 жыл бұрын

Hi I very well could of done that also! I prefer a hawk. Russ

@luisrg436 4 жыл бұрын

I thought it was a remix at first!

@berternie1098 2 жыл бұрын

Damn. Find out who the hangers are and fire them. That has got to be one of the worst hanging jobs I’ve ever seen.

@RussOlinatzPaintShow 2 жыл бұрын

Hi Ernie Yes it was! Some jobs aren’t done correctly and require more mud to fix or make smooth! Where you from? Russ

@dontblameme6328 Жыл бұрын

Russ makes it look so easy. It's not.

@RussOlinatzPaintShow Жыл бұрын

Thanks Don!

@jayakrawe8339 4 жыл бұрын

Why not just use Sheetrock 90?

@RussOlinatzPaintShow 4 жыл бұрын

Hi Jay You can very well use that if you don’t mind cleaning up the drill and bucket after each mix. Sometimes it’s easier when working alone to just mix up the mud pie for each coat. It’s sets in 10 minutes and only have to clean your blades. Have you ever worked with Plaster of Paris? Russ

@richardburgess5215 4 жыл бұрын

The chaulk line on the one board screams rookie

@EuphemiaGrubb 5 жыл бұрын

Starts 3.15

@gsweater5544 3 жыл бұрын

Th-th-th-th-th-th-th-th-th-th-th-th-that's all folks!

@RussOlinatzPaintShow 2 жыл бұрын

Yes

@Superman20911 4 жыл бұрын

Should title this "How to make pizza".

@bababooey1266 5 жыл бұрын

6:13. Why did you flick us off?!

@-agent-47-80 2 жыл бұрын

All politeness aside.... been watching a few of your videos and for the best part nothing to have issues with...but this one I'm wondering why you didn't take out the gap above....you have drywall sitting on the floor.... why? 1/2" minimum from floor... take out 1/2" at top and straighten out that gap... tryna help those who need help.... think about what you're doing a work smarter...not harder

@RussOlinatzPaintShow 2 жыл бұрын

Hello Thanks for your question and concern. I didn’t hang the drywall. Someone else did. I’m here to show you how to level out a poorly hung piece. Russ

@beerye3750 3 жыл бұрын

Fast forward to 1:45

@ericsanchez5638 6 жыл бұрын

Here in Texas we us a mud pan

@RussOlinatzPaintShow 6 жыл бұрын

Hi Eric- have you ever tried a hawk? Russ

@24366937 6 жыл бұрын

Here in China we use a Sampan

@reallife8335 6 жыл бұрын

RussOlinatzPaintShow is a hawk what you used in the video?

@robertbeirne9813 3 жыл бұрын

2 pieces of drywall and replace the whole wall

@daleleibfried8648 6 жыл бұрын

Young ain't ya?

@deteoj 4 жыл бұрын

Skip to 1:47

@albertrent4810 6 жыл бұрын

just use quick set dude no need to waste time making circles of mud to fill with water and accelerant.

@RussOlinatzPaintShow 6 жыл бұрын

Hi Albert I do use Quik set for larger jobs. I really like not having to clean drill mixer and bucket. It also sets in 10 minutes when mixed together. I then can mix more parts of the pie to start the 10 minute process again. Any waste gets formed to a ball and laid down on the mixing board to easily throw away. Al I have to clean is my taping tools. Russ

@albertrent4810 6 жыл бұрын

RussOlinatzPaintShow try it in a drywall pan with 6 inch knife. I'm a taper finisher. try it better than that method.

@RussOlinatzPaintShow 6 жыл бұрын

Hi Albert No disrespect, I do not like using drywall pans. I prefer a hawk. Russ

@jeffreystone8503 8 жыл бұрын

First three minutes to show us all the holes?

@RussOlinatzPaintShow 8 жыл бұрын

+Jeffrey Stone Yes, to show you all the different types of holes that need filling.

@jeffreystone8503 8 жыл бұрын

+RussOlinatzPaintShow Yeah, figured that out after I watched all 9 videos. :)

@jeffreystone8503 8 жыл бұрын

+Jeffrey Stone Guess I was being impatient, and obviously being a fine craftsman like yourself takes patience and attention to detail.

@moemorales4317 6 жыл бұрын

I hope is not by contract.

@jamesdostie1153 7 жыл бұрын

before you give pointers on how to drywall, do your homework in your picture you show a piece of drywall that was installed on the wall, that leaves gaps the top and both sides. what you should done was lay the drywall against the wall ( before you removed the old sheetrook) and traced around it and there wouldn't be any big gaps if done right

@RussOlinatzPaintShow 7 жыл бұрын

Hi James Thanks for sharing your input. You Are right , but again I did not install drywall. I was here to get it taped and painted. Russ

@katytoro5615 6 жыл бұрын

You're not Perfect....you're cruel. Be nice, think twice before you express yourself and hurting someone. Join us..the world needs kind people. You can make a great difference : )

@dhstannard 6 жыл бұрын

Perhaps James should apply the same logic to himself. By listening to the video to hear instead of to find reasons to reply negatively, you would have heard that Russ didn't install the drywall. Like many other people with tape/mud videos.

@jeffcojd 5 жыл бұрын

Try watching the video and paying ATTENTION......People, don't be like James, NEVER be like James!

@garyrose1152 5 жыл бұрын

you should know better you always use green board in a bathroom with moisture

@RussOlinatzPaintShow 5 жыл бұрын

Hi Gary I didn’t install drywall Russ

@geoffschulz 3 жыл бұрын

Learning how to patch is useful, but wouldn't it have made more sense to simply replace the old dry wall with $50 of new sheet rock? Throwing a patch on that crap is going to be more work than taping clean new wall board. It would look far more professional as well.

@RussOlinatzPaintShow 3 жыл бұрын

Hi Yes I thought about that and decided to show how to fix this irregular drywall repair. For folks that have been giving this situation, I wanted to show them how to fix. It obviously requires more mud work, but can be done with out removing/Replacing existing drywall. Russ

@geoffschulz 3 жыл бұрын

You have useful techniques for patching. I'm always looking for ideas on attaching new construction to old and you delivered. Thanks!

@freddysanchez6500 6 жыл бұрын

Use a mud pan It's not clay to be doing circles with it

@michaelnowak2340 2 жыл бұрын

just mix in a pan!!!! easier faster!!!!!!

@RussOlinatzPaintShow 2 жыл бұрын

Hi Michael- Yes it’s just a personal preference. I don’t use a mud pan, I prefer a hawk. I do know a lot of people like using a mud pan. I find it’s easier and faster to clean a flat surface vs all the angles within the mud pan. Russ