BATHTUB AND TILE REGLAZING | How to Reglaze a Tile Bathtub Enclosure

BATHTUB AND TILE REGLAZING | How to Reglaze a Tile Bathtub Enclosure | Tub and Tile Refinishing

Рет қаралды 108,535

Күн бұрын

Bathtub and Tile Reglazing change of color. I took an older bathtub with ceramic tile surround and changed the color. I repaired some cracked tiles and take you along on the step by step process of reglazing a bathtub and tile to look like new without having to replace it. If you like these types of bathtub reglazing and refinishing repair videos please make sure to subscribe and check out my video playlist. You never know when you may want to try to do it yourself (diy) or even know what to expect when you have a professional do it in your home.
Products Used in Videos on this Channel:
Material Used:
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT

Пікірлер: 140

@solargarden0919 4 жыл бұрын

The white color looks so much nicer. Brightens up the small space. Awesome job as usual!

@dedrahall8045 3 жыл бұрын

Nice! I am no longer interested in gutting my 1950's bathroom! This will be the way to go right here for giving it a face-lift! Thanks!

@peaceloveandunity9624 3 жыл бұрын

Looks really nice however, it would have been extremely helpful to see your spraying technique

@passportmarc 3 жыл бұрын

exactly. what paint, how many coats, where to buy etc

@chanceromance1 3 жыл бұрын

Right. And doesn’t even list when he purchased the product.

@VanLuciMoret 2 жыл бұрын

And he "likes our comments" but "ignores our comments" and does not answers the questions.

@MikeNoce Жыл бұрын

Also if you buffed it out and or sanded between coats

@dwillardo6119 4 жыл бұрын

Wow Danny! That tub & tile looks really nice! I wish mine looked brand new like this! Great job! 👍🏻😷

@mjscribber Ай бұрын

Great 👍🏾 job….i did this to a rental property. You actually made this look so easy.

@wendybohm8646 4 жыл бұрын

Wow, what a great change, awesome job Danny!

@karmen624 4 жыл бұрын

It’s look so beautiful from before to after.

@maryjflanagan1922 2 жыл бұрын

It's such a beautiful, clean and bright white!

@BambiCole 4 жыл бұрын

Amazing job. Thank you for sharing. It is amazing what you are able to do. I will be looking forward to your next video until then I am keeping you and your's in my thoughts and prayers please stay safe, take care and God bless!

@amywestbeld9968 4 жыл бұрын

Enjoyed watching this!

@misspandesal 3 жыл бұрын

This looks amazing!

@gratefulmc7216 4 жыл бұрын

Nice work Danny...looks like a brand new tub.

@fridab1952 4 жыл бұрын

This looks amazing 😉

@jenjenb1209 4 жыл бұрын

Wow what a transformation

@Jen4evr 4 жыл бұрын

That looks amazing, will never know that it was once blue tile

@newlooktubrestoration4431 4 жыл бұрын

Amazing tranformation 👏

@ronkey4796 2 жыл бұрын

It looks perfect when you apply the paint !!!!!!!

@michelferguson1652 4 жыл бұрын

Danny great job didn't know tile could be sprayed like that wish you were in my area my friend would love to have her tile done but we are in massachusetts

@ElTemeCastillo 3 жыл бұрын

Fb marketplace look up glazing

@marylou7230 2 жыл бұрын

Looks awesome! Good work 👍

@joycajet 4 жыл бұрын

Awesome job

@michelleapps3227 4 жыл бұрын

Hi Danny love this vlog very useful thank you 👍and first ye

@antwonchristmas8161 2 ай бұрын

How well did it hold up after 3 years?

@YM-wj2dr 24 күн бұрын

Looks great! Exactly what I need done. Anybody know an approximate cost in NC? Thanks

@olgaolgaolga 2 жыл бұрын

What would be required to take that tile all the way to the ceiling? Can this be done with the floors? Only white?

@pli9898 28 күн бұрын

How l ong does this last? Durable? Approx cost for this type of job? Just big ballpark if you can? Thanks. Love it.

@rebekahgarcia9758 3 жыл бұрын

Wow! Very helpful video, the end result is incredible! My fiancé and I are buying our first home and both bathrooms need a lot of work. I’ll be watching again to get more familiar with the process. If I could give some constructive feedback, I’m a video editor and work with music/voice levels. It’s a tricky balance! Not sure what software you use, but making the fade in and out quite a bit longer for the music and reducing the music track would be a huge help in improving the sound. This will make it less jarring when it transitions from music to narration. When just the music is playing, it can be reduced to the same loudness as the narration/background music mix. This will allow the viewer to play through the entire video without having to turn the volume up and down. Hope this helps! Great content, I look forward to more videos on home improvement!

@DPTubs 3 жыл бұрын

Appreciate the feedback!

@gilly702 2 жыл бұрын

Will any HVLP sprayer work or does it have to be the Titan.

@greatwayservices0182 9 ай бұрын

Nice

@noelgutierrez01 3 жыл бұрын

Man that looks amazing. Great job. What kind of tile ech you use? I'm new sub.

@DPTubs 3 жыл бұрын

Napco Pihrana Etch / Cleaner

@amandalopez5889 3 жыл бұрын

What is the acid gel that you are using

@josephcatenacci7995 3 жыл бұрын

GREAT VIDEO, THANKS. CAN YOU SAY WHAT BONDO YOU USED? I HAVE SOME CHIPS I NEED TO FIX BEFORE I DO THE REGLAZE. ALSO I CANNOT FIND Napco PIRANHA Etch ANYWHERE, CAN YOU TELL ME WHERE I COULD FIND IT?

@DPTubs 3 жыл бұрын

Napco LTD has the etch. Also, I use Bondo high performance putty. I have information about it under my community tab on my home page.

@myf14tomcat 2 жыл бұрын

Great video, I definitely wants to do this. The only criticism I'll offer is that you voice is low on the video so when you turn up the volume and the music comes on it's super loud! Otherwise great video, thanks!

@broganmartin4039 3 жыл бұрын

what paint did you use for this?

@marco785 4 ай бұрын

I had mine reglazed. A year or more ago. Now I have hard water it’s pink in the grout. White walls black tub. What’s the best way to clean it so I don’t harm the tile.

@DPTubs 4 ай бұрын

Use a soft sponge or 5000 grit wet sandlpaper with ZEP tub and tile cleaner or Lime Away

@iv3043 2 жыл бұрын

This looks fantastic!! Great job! What is the primer and paint used?

@iv3043 2 жыл бұрын

Paint,?

@愛愛愛愛 2 жыл бұрын

Could you pls link the products you used ? Thanks

@mznanbme 3 жыл бұрын

My tub has some no-slip strips on the bottom. Would those first have to be removed? Thanks.

@DPTubs 3 жыл бұрын

Yes

@ChaseKayzer 2 жыл бұрын

Really good video. What is the name of the materials you used?

@ChaseKayzer 2 жыл бұрын

Also did you sand after you etch?

@Eyebarra 3 жыл бұрын

That looks amazing, how much would it cost to remove and the old tile and put new one?

@DPTubs 3 жыл бұрын

I don’t do removals but I know it would range between $1500-$5000 depending on materials used.

@ghetnhatxaolaonogatvaninh 3 жыл бұрын

look amazing

@look11223 3 жыл бұрын

How much you charge for that and how long it can last?

@anthwanwalker5506 3 жыл бұрын

Amazing work! What kind of primer and epoxy did you use?

@DPTubs 3 жыл бұрын

I used Zinser 1-2-3 for primer to help neutralize the color and seal the grout, Not really for adhesion. The acid wash for was adhesion. The top coat was Krylon Tub and Tile.

@barfo281 2 жыл бұрын

Some other dude has a video saying to NEVER spray for these kinds of jobs. What did he do wrong?

@thinksandthoughtswithsam8445 Жыл бұрын

I need to re caulk all of the seams in my shower, should I remove existing caulk and reglaze then re caulk?

@DPTubs Жыл бұрын

Yes I have a video on it. Search DP Tubs Caulking removal

@tylerclark-realtor 3 жыл бұрын

Hey man great video! I guess I’ve been left in the dark ages because I had no idea reglazing was a thing. I’m getting into flipping and rentals and I have a few questions. How much does a job like this normally cost with the tub and shower surround? Is this more cost affective then retiling the shower surround? How long does this reglaze finish last? For ex: if I had a rental flip done like this, would I have to have it redone every year etc? Much love from OKC OKLAHOMA 💙 LIKED & SUBSCRIBED

@DPTubs 2 жыл бұрын

Connect with me via email or instagram and I can give you some more detailed information. I also hold zoom one on ones for detailed questions if you are interested in starting up your own business with it.

@nicholeray3350 2 жыл бұрын

@tyler clark. Did thry ever answer your questions? I ALSO WOULD LIKE TO KNOW THE ANSWER TO THOSE AS WELL

@tylerclark-realtor 2 жыл бұрын

@@nicholeray3350 sadly no, but that’s my fault. I may be young but I can’t seem to figure out how to communicate and find people’s contact info through KZfaq. I think they restrict sharing personal info on here because I’ve lots of people reach out to my wanting some tips on getting into real estate. When I try to post a comment with my contact info, email, etc it automatically deleted my comment. 🤷🏼‍♂️

@vincentbianco583 Жыл бұрын

@@tylerclark-realtor 1000$ and up for tub reglaze. I’ve done 2 myself for around 400$. As for duration, his will prolly last quite a while. Very thorough and acid etched giving the primer and topcoat a great bite that won’t come off easily. Things to consider though: do you have a sprayer? It’s not completely necessary but will most certainly come out better. The product we use only comes in 2 gallons so try to line a couple up before you go for it because it’s an expensive coating and they shouldn’t be used in partial cans. They have a pot life once mixed so you have a limited window to use the product and clean your sprayer out.

@kennynsdias Жыл бұрын

@@vincentbianco583 Hello,u charged 400$ for a bathtub like the one on the video?

@oshitomaha Жыл бұрын

Where you at bro? How much do you charge for this? Or how much would you charge?

@GetMooreProductions 3 жыл бұрын

Which paint did you use? Epoxy, certain brand?

@DPTubs 3 жыл бұрын

Krylon Tub and Tile

@suziehinds4064 4 жыл бұрын

❤

@starslightning4818 5 ай бұрын

What about using it to paint the marble of the kitchen table?

@DPTubs 4 ай бұрын

Yes that could work as well!

@jesusmejia4138 3 жыл бұрын

What glaze did you use and sprayer? Thanks

@DPTubs 3 жыл бұрын

Krylon Tub and Tile with Capspray Titan Maxim II spray gun

@phillysfinestrefinishing9019 3 жыл бұрын

Awesome work! How much product of primer and paint was used for the job?

@DPTubs 3 жыл бұрын

I use about 48 mixed ounces of finish material and about 20 ounces of primer!

@phillysfinestrefinishing9019 3 жыл бұрын

@@DPTubs nice you lay it on there nice and thick. I do work in Philadelphia, tubs and surrounds come out great for me I’ve just been having a hard time doing full bathrooms, where there is additional tile going all around the bathroom walls. I get too much overspray. I work by sections, to let the overspray clear out but usually my bathtubs and tile come out gritty. Any recommendations? I’ve been masking off the bathtub and spraying all the tile first, tile comes out glossy, and very smooth but once I spray the bathtub it loses some of the gloss and had a gritty feel from the overspray from the bathtub lol

@DPTubs 3 жыл бұрын

@@phillysfinestrefinishing9019 maybe too much air pressure not enough paint so it’s very thin and atomized more. Also only need to be about 6” from the surface the further you are the more gritty it will get everywhere. Also make sure you sand primer and tack cloth the surface before spraying. Make sure gun & cup are cleaned thoroughly. Use a fume extractor while spraying and each coat should have 10-12 minutes of clearance time in between coats. If it’s losing gloss then you need to give more time in between coats. Too much material too fast causes Blushing during the curing process and will end up dull. Also make sure your ratio from catalyst to base paint is correct. Too much catalyst will cause gritty satin look. What is the weather out there? Make sure the material is mixed really well too

@phillysfinestrefinishing9019 3 жыл бұрын

@@DPTubs I use the same spray gun and compressor you do, I used to keep my air pressure at 7 o’clock to keep the overspray low, and my paint/needle knob 3-3and a half, half turns. When I spray I’m probably farther away maybe 8inches from the surface? Do you keep the same distance for paint and primer? I have never sanded down primer nor though about it, what grit sandpaper do you use to sand the primer? Usually my primer coats are light, and I don’t wait too long on primer it’s usually dry to the touch in a minute or two. For top coat I don’t normally wait longer then a couple of minutes but my first coat isint heavy either, my second coat is the heavy coat I is (US) ally use 20 oz of primer and 36-40 oz of top coat(paint) I use napco products and the paint dries pretty quick, it has a 2hour dry and is low voc. When doing a bathroom with tile going all around the bathroom would you spray the primer non stop (besides waiting in between coats)as well as the top coat? Right now I’ve been covering up my bathtubs, spraying the tile first with primer and top coat. I get a really smooth finish , wait 10-15 mins to uncover the bathtub and coat the bathtub with primer and top coat but end up with a slight gritty finish on the tile after spraying the tub. I work with a large 12” exhaust fan but still end up with a gritty tub if I don’t cover it and end up with a gritty tile surround if I cover the tub and spray it last. Appreciate you taking the time to help me out! Let me know if there is any way to return the favor!

@notme3252 2 жыл бұрын

Love it. White is safe and classic

@neilquinn 2 жыл бұрын

What's a job like this usually cost?

@janeparra3300 3 жыл бұрын

What type of primer and paint did you use?

@DPTubs 3 жыл бұрын

Primer Zinser 1-2-3 and Coating is Krylon Tub and Tile

@jnarez1 3 жыл бұрын

What’s the waiting period between coats?

@DPTubs 3 жыл бұрын

I spray 3-4 coats / passes. After first coat I wait 10 minutes After second coat I wait 12 minutes After third coat I wait 12 minutes. However it’s beast to check with the product specifications. This helps avoid drips or sags as well as Blushing. I will go over terminology and meanings soon.

@syhm70 2 жыл бұрын

No mention of what spray you used

@ginovolta6122 3 жыл бұрын

Did you use a primer too or just the finish coat

@DPTubs 3 жыл бұрын

I always use primer when I spray tile, not for adhesion but to help neutralize the tile color and seal the grout.

@teddypgray 2 жыл бұрын

Would have actually liked to see you put on the coats.

@chriscolameco6850 5 ай бұрын

What do you use for the finish coat?

@DPTubs 4 ай бұрын

I use professional grade Resurface Solutions. However there are some DIY kits that I can recommend. Just DM me on instagram

@sriniganesan5162 3 жыл бұрын

Good work. Nice Job. Just one request. Please reduce music volume. If reduce during music and then unable to hear when you speak I need to increase and decrease it is annoying.

@DPTubs 3 жыл бұрын

Will totally take the feedback into consideration.

@tabithalincoln2839 3 жыл бұрын

What kind of spray did u use? The brand? Ty

@DPTubs 3 жыл бұрын

Krylon Tub and Tile

@hchyan9871 3 жыл бұрын

is it 500 for both the tub and the above tile ?

@DPTubs 3 жыл бұрын

Yes!

@chrisroscoe7993 7 ай бұрын

As a fellow tub glazer it’s weird seeing others professionals do it.

@74sleen 3 жыл бұрын

Wow! That’s nice!! How long does this last? Does it have to be redone after a while?

@teleplace2639 Жыл бұрын

He didn't show the spraying process? What application/sprayer did he use?'

@DPTubs Жыл бұрын

Check out the latest video

@leosreglazingreglazing1950 3 жыл бұрын

what kind of turbine you use?

@DPTubs 3 жыл бұрын

Titan Capspray 75 HVLP...I will have a video on a new one I bought this week. Stay tuned

@jillsmith9726 4 жыл бұрын

Hi Danny...could you give a ruff estimate of what that would cost to do that by someone like yourself?

@DPTubs 4 жыл бұрын

This job would range from $500-$600

@jillsmith9726 4 жыл бұрын

Thank you for the answer

@mikeg4541 3 жыл бұрын

How long does this last?

@DPTubs 3 жыл бұрын

I would say 3-5 years DEPENDING ON CARE of the surface!

@sbb526 3 жыл бұрын

when I sand my tile, it does NOTHING to them in regards to scratching them or scuffing them up.... anyone else experience this?

@DPTubs 3 жыл бұрын

That’s why the acid etch is important. The avid is what deglosses the tile making it rough enough for yiu to start sanding with 80-100 grit sandpaper.

@sbb526 3 жыл бұрын

@@DPTubs Possibly, but i'd think your average person doesnt want to mess around with an acid like that.

@LJ-focus Жыл бұрын

How much would something like this cost?

@DPTubs Жыл бұрын

$500-$600

@238angela 2 жыл бұрын

Great job...Wish we could have seen and heard how you did it...SMH

@joemontalvo50 2 жыл бұрын

Nice job but why didn’t you show videos you spraying it

@DPTubs 2 жыл бұрын

Forgot the go pro! Check out my other videos

@alyssawssinging4039 4 жыл бұрын

Hey

@GarbitchWeeb Жыл бұрын

Could the tiles and tub be sanded with an electric sander instead of apply acid? Concerned about the acid as there is a pregnant family member in the home.

@DPTubs Жыл бұрын

Sanding will not etch it enough to make it rough. You would have to at minimum use TSP with steel wool or 80 grit sandpaper then make sure you epoxy primer it before the top coat

@troylucassian3375 7 ай бұрын

Wear a respirator. old tile and grout may have asbestos in it. do not get overzealous sanding.

@Justheretowatch321 2 жыл бұрын

I don’t know what the product you used is called and I didn’t get to see “how” you coated it so this video was just prep Info.

@DPTubs 2 жыл бұрын

Please feel free to watch my newest bathtub and tile video

@njctboy 2 жыл бұрын

Heard that it does NOT last... at most, 5 years?

@DPTubs 2 жыл бұрын

Not sure who you heard that from but I have seen them last quite a bit. I have also seen different factors affect the longevity of the job. How well someone cleans and takes care of the surface and also how the work was done. It all depends. However, overall if done properly and if cared for properly it will last. Ruins 5 years easily

@Rudesweet 3 жыл бұрын

Please fix the audio

@kurthall2215 2 жыл бұрын

Your video is great , however if you watch your video, the music is 5 times louder than you are. When you speak the volume has to be turned up. When the music comes on, our surround sound system blasts the music. The music and your voice are disproportionate, to an extreme. Sorry to complain, because your advice is great.

@DPTubs Жыл бұрын

Thanks for the feedback

@williamburja6730 2 жыл бұрын

Don’t put background music!

@hendrand 3 жыл бұрын

Good video, bad sound.

@DPTubs 3 жыл бұрын

I appreciate your feedback

@emeralddragon2010 2 жыл бұрын

looked better before

@DPTubs 2 жыл бұрын

Ha ha I guess if you like blue cracked tile

@emeralddragon2010 2 жыл бұрын

@@DPTubs i like blue. white on white? ugly and boring. np changing cracked tile. something nicer would have been better

@stevendaniels8652 3 жыл бұрын

This was not helpful at all, what brand is acid etch, as i can't find any.

@DPTubs 3 жыл бұрын

Brand of acid etch is Napco Pirhana cleaner etch.

@stevendaniels8652 3 жыл бұрын

@@DPTubs thank you. You are the only person talking about etching. I was using two kits from homedepot and that acid takes7-10 business days to deliver. The cans wouldn't even depress. I did l the prep, taped off, one coat....about 8 hours in on a $700 job(unpaid)....and i just walked away from it. Just not worth the hassle. Thanks for your time.