No video
I'm 3D Printing an ENTIRE Titan Legion
Рет қаралды 32,146
Күн бұрынThe Equipment I used to Print this is;
Sonic Mega 8K: phrozen3d.net/...
Sonic Mini 8K S: phrozen3d.net/...
Wash and Cure Kit: phrozen3d.net/...
SUNLU ABS-Like 3D Printer Resin which you can get here - amzn.to/3raljFq
You can support the project by donating here and getting your name implemented into the final project! www.paypal.com...
Join this channel to get access to perks:
/ @battlebrothersam
If you want to support the channel further please pledge to my patreon.
/ battlebrothersam
*Some of the links and other products that appear on this video are from companies which Battle Brother Sam will earn an affiliate commission or referral bonus. Battle Brother Sam is part of an affiliate network and receives compensation for sending traffic to partner sites. The content in this video is accurate as of the posting date. Some of the offers mentioned may no longer be available.
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics.
@Godofallmadness Жыл бұрын
I vote for all the knights too 😈
@Vanguardchassis Жыл бұрын
You can never have too many.
@battlebrothersam Жыл бұрын
Why isint your name about space puppies
@Godofallmadness Жыл бұрын
@@battlebrothersam the terms and conditions said nothing about youtube 😂
@Fughley Жыл бұрын
Sam: if you print all of the Titans in the phalanx: I’ll spot you one bottle of resin just to see this project come to reality.
@griffinwraf763 Жыл бұрын
It would be totally awesome to see all of the knights along side the titans that would be wicked!
@battlebrothersam Жыл бұрын
I think ill have to do it
@tiberiumnp8030 Жыл бұрын
Absolutely, it would show the scale of titans better as a lot of players are familiar with knights.
@chrisdixon6689 Жыл бұрын
Sometimes the only way is to batter the wall down with sheer determination, sacrifice and refusing to be beaten. It's painful, its hard, it's necessary. Get a part that failed. Manually support it. Print it. Repeat until you succeed. Great vid!
@battlebrothersam Жыл бұрын
Well said brother! Thanks for the words of inspiration 😁
@geek_industries Жыл бұрын
You should definitely finish this. Was considering printing the warlord titan myself and would love to see you do it too
@ironbomb6753 Жыл бұрын
Dang, even buying a printer to print a Warlord is cost effective!
@RoseKindred Жыл бұрын
@@ironbomb6753 Yep, this is what many forget when they say "Oh, you have to buy a printer though, how is that saving money?" Like, you could buy a new printer for each Warlord and STILL save.
@battlebrothersam Жыл бұрын
I've always wanted to print a warlord since I got my mars 2 Pro I'm going to stockpile resin as soon as it comes in stock
@OnceinaSixSide Жыл бұрын
Original sculpts let's gooo! The sheer amount of creativity and talent in the alternate/proxy sculpt scene is 100% worth celebrating. Looking forward to seeing a fully complete Kaliakos Anathema Construct! I'm gonna be making one too at some point but after that last titan I need a breather. The pain of repeat failures is all too relatable 😅 Good luck!
@kurtryankoch7356 Жыл бұрын
i know your pain just had to tear out an over worked LCD and rescue a resin covered printer this week you happen to have any exposure times for a mars 2 pro on the elegoo gray abs 2.0? im feeling ballsy
@boneman-calciumenjoyer8290 Жыл бұрын
It's always hit or miss for me. Like there was this one guy who made true scale legs for my old OOP plague marine torsos and they f*cking slap. But on the other I see a great value skitarii hoplites from the makers cult and am kinda disappointed.
@deltacommand8053 Жыл бұрын
I believe in you!!! I’ve printed off a couple titans and it always has issues. Iron within brother!!!
@battlebrothersam Жыл бұрын
IRON WITHIN IRON WITHOUT!
@hyosworld109 Жыл бұрын
I want to see it finished! But also I absolutely understand how frustrating it is when a plate keeps failing. Stay strong brother
@battlebrothersam Жыл бұрын
Thanks brother! 😁😁
@danielchristensen1381 Жыл бұрын
Buddy dont let a few failures get you down, youll get it and the following video you post will be the shit. Keep it up, youre an inspiration man
@battlebrothersam Жыл бұрын
Thanks brother! What a great community 😁😁
@lordlupercal9278 Жыл бұрын
Hi Sam, Stick in there mate sometimes 3D printing can be really frustrating. I have picked up a habbit of "Quick Wins" when i'm getting frustrated or uninsprired with a project (Printing or painting). Take a step back. Print and paint something that has nothing to do with what your working on that is just for you and is fun and quick and then come back to. I get taht that doesn't work (or is practical) to everyone but it works for me and give me that little boost to get back into it.
@WIBRTyranT Жыл бұрын
definitely worth finishing. at the very least, the journey will give you a bunch of videos to put out
@battlebrothersam Жыл бұрын
That's very true!
@JJModelMaking Жыл бұрын
I never trust auto supports, it might take time but go manual. Also don't over fill the print bed, break it up into smaller chunks
@battlebrothersam Жыл бұрын
I'm gonna take the time and learn them properly
@Fughley Жыл бұрын
Oh… Heck.. yea! Can’t wait to see the final product.
@battlebrothersam Жыл бұрын
You and me both brother 😁😁
@MrGorillafist Жыл бұрын
Ah my dude take your time with it. Making sure it's done right is important but more importantly make sure you're not burning yourself out. You got this 👍
@battlebrothersam Жыл бұрын
Thanks brother!
@jacobl2222 Жыл бұрын
You could try splitting the plate up and just printing a few pre-supported parts at a time. Could be that most of them are fine, and it's just a couple on that plate (or the way some of them are arranged together on the plate) that are causing an issue that's ruining everything. Also, if the failure is purely parts tearing off their supports, then before manually supporting or auto-supporting, I'd try just beefing up the tips of the existing pre-supports. And/or bumping exposure a little. That could be enough to give them the strength to hold on. They might leave behind more surface damage when you remove them, but personally I'd rather spend some time filing and sanding versus cleaning up repeated print fails.
@richmiko4185 Жыл бұрын
Don't give up!!!!! Can't wait to see this project completed. I'm printing a warhound titan right now. People that don't 3d print have no idea how much work is entailed. If you need help with supports, let me know. I can definitely give you a hand if needed.
@kevincaruthers5412 Жыл бұрын
Very cool. I look forward to seeing the finished (and painted) legion. Good Luck!!!
@thaskew01 Жыл бұрын
Don’t let the fails get you down boss. I’ve printed 3 warlords, 9 knights variants, and 15 armigers. I’ve had prints fail cause I let me print room get too cold. Lessons learned mang.
@MrKiaserS Жыл бұрын
Dont give up on your prints! It sucks but it's so worth it on the large scale. In terms of the solwyte warlord titan. I'm working on one myself. It's a pretty decent build. There are a few issues here and there that I've stumbled across but overall really good.
@battlebrothersam Жыл бұрын
What sort of issues have you came across brother?
@MrKiaserS Жыл бұрын
@@battlebrothersam so far I've only made the legs and there was a fitment issue with one of the hydraulic cylinder pieces. I let the creator know what I found and I believe she said she is updating the model. There is also some issues with the feet just not being very strong due to the design and the way they are supported but can easily fixed with additional supports of like armature wire or screws etc etc.
@pablofiasco2 Жыл бұрын
id vote yes on Knights as well! ..... also, remember to save your failed parts, turn that stuff into destroyed-Titan Themed Terrain pieces and sets!
@jonesfoxx2241 Жыл бұрын
You're a madman and I'm here for all of it !
@jamesdunn581 Жыл бұрын
New patreon member here, gotta say, a great community and already "paid for itself". Keep on going with this. I can't wait to see how you paint it up!
@striderfox71 Жыл бұрын
Those prints look super smooth
@Anambor69 Жыл бұрын
I'm in a real printing slump right now but this might be the kick up the backside I needed!
@battlebrothersam Жыл бұрын
We got this! 😁
@TheZombiecrab Жыл бұрын
I recently started my own titan builds. Half done with the first warlord and I got another I wanna do after that. Super excited to see your finished project. Don't let the print fails get to you. I had a few times where I just had to reduce the over all items on the bed and then add supports by hand with the extra space. Generally speaking lychee has been very good to me with just auto supports before I feed the file to Chitu.
@mateorodriguez5368 Жыл бұрын
Keep going Sam! Finish the project you got this man!
@RhantheSlayer Жыл бұрын
my very soul shattered when you talked about the 1st layer not even printing anything because that's happened to me a few times 😩
@kiripop4577 Жыл бұрын
i think you should carry on the project recently i've been having a lot of failed prints but im not gonna let it stop me from building my dream army
@TheTour109 Жыл бұрын
The alternate sculpt for Chaos is a great Idea !
@Hnlamqe Жыл бұрын
Hang in there brother. I look forward to your videos every week to see what you make next. Then its off to see if I can produce the results myself. Working on Lost Ships at the moment. Wouldn't have pulled the trigger if it wasn't for your video. Best of luck in future prints.
@battlebrothersam Жыл бұрын
Thanks brother! The lost ships are so good
@dlowbrwn9490 Жыл бұрын
WARRRRRLOOOOOOOOOOORRRRRRRDDDD! You got this! Had the same misprint issues for 3 DAYS! Try a rotating and moving the files around on the plate!
@CTRLCopy Жыл бұрын
Always had difficulty finding a good reaver titan. Hopefully I will come across it one day. You came so close. Take a break and give it another go
@ianscantland6282 Жыл бұрын
Yes to knights! I’ve got 6 war dogs printed for my Chaos Knights army. Still working on the Abominant (plenty of fails in a row), and I’ve taken a bit of a break from it.
@myriadworlds8434 10 ай бұрын
If you're suffering from support failure after multiple reworks of your supports, islands etc, try dropping the lift speed. Especially with these big prints. You already seem to have some ginormously dense supports on, dropping the lift speed will reduce the maximum peeling force when lifting by spreading the work over a longer time instead.
@mraide Жыл бұрын
Mate I have just got into Adeptus Titanicus, and its brilliant, talking to a guy in GW he said his frind ONLY runs squads of Knights, after a couple of games, I can see how you could literally overrun an enemy!
@terrorstalker Жыл бұрын
Love the videos! I printed a resin warlord psi titan last year and, if you're using the files that everyone uses for warlords, be aware that the torso and shoulders are DIFFICULT and you may need to sand or cut them to fit together well. If you're going to paint, do all the armor panels after you paint the body, as it gets hilariously difficult afterwards to put details on a 2' tall 12 kg model
@hobbitsatplay9542 Жыл бұрын
Go big or go home!!! Lol It would be so awesome to see both the loyalist and chaos. Since I'm not the one with the project, I would totally love to see the full knight compliment along with the Titans. Whatever you choose I'll be more than happy!
@bakamaru3867 Жыл бұрын
Hell yeah finish Sam. your printing is an inspiration to be sure!
@mortaegul6241 Жыл бұрын
It would be so awesome to see all the titans and knightsin a diorama standing across the battlefeld from the chaos titans! Keep fighting on brother
@onlyhc7792 Жыл бұрын
waaaarlord titaaaaan, everytime my friends and i speak about them we pronounce it like that haha, your titans will be looking great
@noahwick3217 Жыл бұрын
I really want to see you complete this project!!!!
@drguineapig8755 Жыл бұрын
At some point I’m gonna do this as well. Also you should definitely print the knights as well.
@Knownascomic Жыл бұрын
Chaos alternates !!!! Also would love to see the knights added to the configuration
@kimberleydolan6680 Жыл бұрын
I would love to see you finish this project.
@thomasengelthaler462 Жыл бұрын
To your question posed around the 2m15sec yes you should print all the imperial titans as well it would be very interesting to see what you do with them
@brokenthought1102 Жыл бұрын
I am intrigued by ALL THINGS CHAOS! I'm slowly working on a Kill Team of Noise Marines
@orthy853 Жыл бұрын
I can't wait for the rest of the Solwyte studio war constructs to come out. I have used some of them for narrative games before. If you make them stupid strong it makes for a good casual game.
@StellarMalice Жыл бұрын
DO IT. also everyone join the Sam army.
@battlebrothersam Жыл бұрын
Haha thanks brother
@zero_zenny319 Жыл бұрын
All the knights!! Also you got this man, you must stay strong through failed prints the Emperor wills it!
@bendover-tx1ku Жыл бұрын
dont give up mate. you can do it
@battlebrothersam Жыл бұрын
Thanks brother what a great community!
@carlstanford7607 Жыл бұрын
Love the ambition of this channel
@akiraadamu8394 Жыл бұрын
Just bare with it, the plate will eventually print right. Oh, and of course print the whole manipole including the knights
@Biggles369 Жыл бұрын
Keep on printing, you will get there. Heavy Supports are the way forward, but you still need to look at the orientation to make sure the suction isn't too much. The other thing is that if you haven't hollowed the body section then you will have a LOT of weight on the knee joints so consider pinning them. This is even more important with the Warlord, which is why some people use FDM for the legs and resin for the armour. I made a hole through them and inserted a metal rod. Finally, yes, to imperial knights.
@tedcogley1939 Жыл бұрын
Looks awesome
@theshowman4510 Жыл бұрын
ITS NOT A REAL LEGION WITHOUT ALL THE BOIS TOGETHER! DO IT!
@Shipx7 Жыл бұрын
Would you be willing to do a video on assembling tips? Theres not much content on what glue is the best and how to make sure that flimsy assembled minis really stick together well. Is pinning a good idea? Will it break if I try? Do I sand the area first? Things like that would be extremely useful and appreciated.
@battlebrothersam Жыл бұрын
Yeah I could definitely include those in future videos great idea brother!
@Shipx7 Жыл бұрын
@@battlebrothersam Awesome, thanks for the videos and glad you're growing. Im printing some Ironstriders and I can glue them together but Im really not confident they wont fall apart at a slight breeze. All your finished assembled models look very sturdy so Im looking forward to learning how you do it.
@Nox029 Жыл бұрын
I'm happy to see that someone else had the amazing idea to do the same thing, I printed a warlord titan as my starting point. I planned on printing 4 warhound titans unfortunately do to work and lack of motivation I stopped. But after watching you're video you motivated and inspired me to finish it and print up a chaos titan army to go up against it. Not sure what chaos God to choose tho.
@bucket638 Жыл бұрын
I am also having issues with my Mighty 8k not printing large prints. It's definitely my supports, but its very frustrating. I switched gears to a different project just to get my confidence back up. But I need to go back to that project as it was the reason for getting a resin printer...
@battlebrothersam Жыл бұрын
Yeah it's definitely the supports because I printed some different models after and they came out fine
@hihi6785 Жыл бұрын
I definitely want to see the maniple with the knight house.
@rupertjones5197 Жыл бұрын
Definitely continue!
@Tizzie137 Жыл бұрын
I printed myself an entire warlord titan and i love that thing so much but it took so looooong
@battlebrothersam Жыл бұрын
Ummm how long we talking brother 😅
@Tizzie137 Жыл бұрын
For me years but thats cause i took periodic breaks and it was on a Mars 2 pro but with no like year long breaks probably 3-4 weeks
@JhonnyChitarra Жыл бұрын
I vote for the knight. And yes you should go all the way down to the end of the titan maniple.
@charleslung5959 Жыл бұрын
Keep it up, I know it can be daunting at times.
@yehiav_tabib Жыл бұрын
All of the knights!!!😁 Also the chaos alternative sounds like an awasome idea
@sebytheman Жыл бұрын
I've found over the years of printing that usually when I get repeated support failures it's because the tension in my FEP has become slack -- my rule is 3 failures in a row = new FEP and it's never failed.
@theessentialguideforblokes7960 Жыл бұрын
I feel your pain, I had a file corruption which ended up in a giant solid block of resin, next job, I ran out of resin, now it’s out of stock in NZ and I have to switch resins and re slice everything with new settings!!! We do this for fun don’t we?
@ohwell3432 Жыл бұрын
Welcome to the Legio my friend! Got mine printed at the beginning of the year. Highly reccomend jbkwik and cue tips for assembly. Havent needed to pin my warlord using that stuff. Good luck brother!
@battlebrothersam Жыл бұрын
Thanks for the tips brother!
@ohwell3432 Жыл бұрын
@battlebrothersam no problem! I have the same files for the reaver too, but I didn't have your problems printing the legs. I'm happy to supply them if necessary to help!
@malickmeziani_FreePalestine Жыл бұрын
This is a project that is going to take you a very loooooonnnnng time to finish but will cost you infinitely less money. Anyway, we’ll follow you with great interest.
@battlebrothersam Жыл бұрын
I might need to generate a manufactorum brother
@malickmeziani_FreePalestine Жыл бұрын
@@battlebrothersam if need be, brother ! Praise the Omnissiah.
@yagsipcc287 Жыл бұрын
Aw yeah I was excited for this one to come out :-) There is only one choice in life CHAOS!! Thats my vote ha
@battlebrothersam Жыл бұрын
FOR CHAAAOOOSS!
@SenseSlap Жыл бұрын
Would definitely like to see this project continue
@Guardsman156 Жыл бұрын
Do some lucius titans aswell, they look amazing and there's some stls for them on cults and other websites
@nickschaefer9320 Жыл бұрын
Sam you absolute Champion! You legend! You catastrophic kicker of ass! Go! Go! Go!
@savagepatty Жыл бұрын
I always wanted a war hound titan. They are the best looking titan imo.
@SebastienlovesCookieswirlc Жыл бұрын
Hmm, why not? Yes do the chaos side as well!
@vashery Жыл бұрын
A full titan legion for sure!
@battlebrothersam Жыл бұрын
Including the little knights? 😅
@Max-oj9qt Жыл бұрын
I printed one complete in fdm...it's still awesome
@RestlessSoul45 Жыл бұрын
Rest bit keep. On going! Maybe try supporting yourself. It is secretly easy of you tilt your models by 30 degrees in all directions.
@rodneygaul2227 Жыл бұрын
A Titan Legion includes support vehicles ( knights ) to stop flanking and bum rushing Warlord
@tehdobber Жыл бұрын
Always yes to Chaos, and of course yes to the knights.
@christophersteen1873 Жыл бұрын
If you do an auction or giveaway or raffle of the knights, then yes you sure should do them and the armigers.
@Mattyteze Жыл бұрын
Id love to see the Titan finished off. Also some of the Solwyte Studio stuff looks awesome. I am looking at buying some of their files soon.
@pizzalord3n Жыл бұрын
I feel you when stuff just won't work. Been having a hard time with my fdm where everything's going wrong. Resin wise, pretty ok
@battlebrothersam Жыл бұрын
Fdm is hit and miss for me lately so I've just focused on resin
@garfieldwithissuez Жыл бұрын
Yes do all of the nights and support groups and whatnot, and also yes especially if you're going to be using Lauren's sculpts like Once in a Six side did. I'd love to see her get some love on KZfaq.
@BrucieBonus Жыл бұрын
Do it do it do it do it do it do it do it! No pressure. You're bonkers but it'll be cool.
@battlebrothersam Жыл бұрын
If you want to join possibly the BEST discord in the universe then become a patreon - www.patreon.com/battlebrothersam You can also donate to the project and get your name implemented! www.paypal.com/donate/?hosted_button_id=4DEDDFSBRDT3Q
@isaacspear189 Жыл бұрын
*definitely the best discord
@MrCursedWolf Жыл бұрын
Thank you for this video. Are you able to discuss how long you cured the parts? I am hoping to start my journey of reaver printing in the near future and was just curious about the cure times
@jokersredace Жыл бұрын
I've printted a imperial knight. A Acastus Knight Porphyrion, and I'm printing a reaver titan as this video is playing. Next is a bigger titan. And will finish my war master titan at 40k scale.
@jokersredace Жыл бұрын
@@MrCursedWolf I've personally use a photon mono x . Using sunlu grey resin. 1.5 seconds cure time per layer . A base for the raft I've done is 25 seconds. . I use chitubox and have my minis 4mm off the build plate so the raft and suports have room. Not the response you were probably hoping for but it's what I use. Also the uv power is at 100%
@MrCursedWolf Жыл бұрын
@@jokersredace appreciate you but Ive not a problem with printing it's how long to cure the final print...ie sticking it under uv sorry didn't make that clear
@callsignbeaver6355 Жыл бұрын
I'm having a few issues printing my Reaver as well, i have some of the 3d models that i have sliced multiple times but when i plug the stick into my printer it shows an empty file. I say stick with it though man, this is basically the same project i started to justify my 3d printer purchase and it has been a little bumpy but i'm getting there one piece at a time if i have to
@fernandez313495 Жыл бұрын
I suspect you have sorted now but, I had this same issue and for me it was the file name i saved it as was too long...simple thing as that and no file showing in stick on printer but was on pc. Also rogue supports that have somehow ended up in the void of space that are not easily spotted but can cause issues.
@callsignbeaver6355 Жыл бұрын
@@fernandez313495 no actually i hadn't but i will try that. my printing issue is probably more due to supports but i'm not sure yet. thanks though
@ChrisOsberg Жыл бұрын
I would love to see a printed titan legion!
@AngelHernandez-rx5pg Жыл бұрын
I think the alternative titan sculpt is cool, but nothing really beats the original warlord titan sculpture
@Frity91 Жыл бұрын
where did you get the build manual for the 3d files of the reaver ?
@bomber9955 Жыл бұрын
Keep going brother.
@matthewleffek749 Жыл бұрын
Would love to see all the knights aswell
@kurtryankoch7356 Жыл бұрын
Absolutely charge on !
@battlebrothersam Жыл бұрын
I have to now! 😁
@fernandez313495 Жыл бұрын
And once you have printed all of those.... Dont forget the warmaster titan. There are full scale files out there innthe void.
@crac_sanwich423 Жыл бұрын
Sam, the leviathan has been out for a week. Also print the alternative sculpts or no balls💀🦖
@battlebrothersam Жыл бұрын
I know brother 😂 wish I had more time
@nrgspike Жыл бұрын
Personally, I never trust pre-supported models. Maybe I go a bit overboard with my own supports but I rarely have a failure. For models of this size, I would only ever use heavy supports. I'd let auto-support do the heavy lifting and then just check it over and add additional supports where needed. A full Titan maniple is definitely on my printing wish-list and I've got all the files for one, but there's a lot in the theoretical print-queue before I get to that. Good luck with yours!
@battlebrothersam Жыл бұрын
I've had to clear the print queue to do it and with all this encouragement I'm going to plow through and get it done
@albion2339 Жыл бұрын
do you know where someone could get some titan files? please and thank you.
@miniaturepainterAl Жыл бұрын
All the titans together
@PNLMB Жыл бұрын
Would be heartbroken to see you give up when you've put so much effort in already.
@user-df6en8rc3e Жыл бұрын
Lolz I just finished my first printed titan and will print 2 armigers this week. The titan I have looks so grim it could be chaos or loyalist so don't know if going full with one of both
@ReverendPONT Жыл бұрын
Definitely finish the Reaver and then do the Knights.
@johnhanley5546 Жыл бұрын
I love these - keep going!!
@battlebrothersam Жыл бұрын
Thanks brother!
@godzillarolls1613 Жыл бұрын
Never Give Up! Never Surrender!
Battle Brother Sam
Рет қаралды 74 М.