Baxi Connected self-help: how to repressurise your boiler

Рет қаралды 173,730

Baxi - sustainable heating and hot water solutions

2 жыл бұрын

This video explains how to repressurise your boiler. First we show you how to identify whether you have an Easy-fill filling link, a Rigid filling link or Flexi filling loop. Then we explain how to repressurise your boiler using whichever filling link you have.
If your boiler has a digital pressure gauge, please watch this video: • Self help: How to rep...
You'll find lots more information and the answers to the most frequently asked questions about your Baxi boiler on our website www.baxi.co.uk/faqs

Пікірлер: 66

@papakwadwo4751 6 ай бұрын

You are spot on. I followed your instructions and I got my boiler back working again, many thanks.

@vimr9949 Жыл бұрын

"Don't worry if its a bit stift" - the best piece of advice I got from all the videos I watched on the subject !😊

@stfuplsok 7 ай бұрын

*stiff

@vimr9949 7 ай бұрын

@@stfuplsok my apologies of course

@PaulWrightIV21 Жыл бұрын

Brilliant, thank you. Stayed at an AirBnB where the boiler needed re- pressurising and this was invaluable help

@MagsPM Жыл бұрын

Thank you for this video. It really helped as I was at a complete loss and very stressed out.

@TheRHYSD Жыл бұрын

What about when you pull the lever and nothing happens?

@williamnepe2123 8 ай бұрын

Thanks so much, didn't realise it would be such an easy fix. Cheers!

@Ron_Gifty Жыл бұрын

Thanks very much for this video . Helped me a lot ❤

@neilburton4058 9 ай бұрын

Really helpful and easy to follow guide. Thank you.

@heffo67 Жыл бұрын

Thank you for the video. Very simple and easy to follow. Mine is the flexi filling loop. We have had no problems with pressure until today (Low Pressure). The plumber showed me how to adjust it but it's been 8 months so I'd forgotten that there are 2 valves to turn. That one of the valves was hidden behind some towels didn't help me remember. 😂

@user-ez2ey9is4c Жыл бұрын

Thank you so much for this easy to follow video

@shizokagaming3423 Жыл бұрын

Great video, proper informative, just be aware that sometimes the fitting loop may not line up properly based on snagging issues from the installation, what ever you do, DONT CROSS THREAD!

@RH11THM 9 ай бұрын

Top notch. I knew it was something to do with the two valves, but one of them was a bit stiff and I didn't want to break the fitting.

@clearlynotwoke4929 8 ай бұрын

Excellent video, thanks!

@jplusab 7 ай бұрын

This video solved my issue - thanks!

@Andy-jf2pq Жыл бұрын

Thank you .. saved me a plumber call out cost!

@razvanburada1648 8 ай бұрын

Thank you for your help!!

@Through_Sams_cam Жыл бұрын

Thats was very helpful. Thanks

@razvanburada1648 2 ай бұрын

Thank you for your help!!!❤

@user-bk5ed5yh5b 2 ай бұрын

Thank you It’s really helpful 👌

@ceylonuk6250 Жыл бұрын

thank for the video 🌺🌺❤

@gillitte Жыл бұрын

Thank you for this video. I was so stressed out. Thankfully I thought of u tube.

@suelindsell5101 5 ай бұрын

Very easy to follow

@user-zb2fy1ks8z 10 ай бұрын

Thanks it helped 😊

@Kiel.01 5 ай бұрын

Thank you very helpful

@jacksonirving4594 Жыл бұрын

Just used the video cheers.

@WakarimaWaKariri 7 ай бұрын

Very good info

@lovesalonemusic2718 4 ай бұрын

Thank you so such. Appreciate

@rosemarysilverman1855 Ай бұрын

Fab!! Thank u

@Kielan92 8 ай бұрын

Thank you ❤

@Blockchainboy2025 6 ай бұрын

Thanks!

@danielvolkov4674 Жыл бұрын

Thank you

@teslime1 6 ай бұрын

Thank you for the video. Our boiler is rigid filling link type . The copper bend was attached already and not have the cups. Do we need to remove the copper bend after pressure is ok? Without cap how we could remove it?

@premserwan-xx7cp Жыл бұрын

Thankyou for this video.Verry informative and so easy to follow.I am shure it's helped many many people.🙂

@stfuplsok 7 ай бұрын

*very *sure

@VamLoveAndKisses 11 ай бұрын

Very helpful, I have a a rigid fitting loop with the connector pipe already fitted. Very simple and easy.

@TravelingToday-yu9gv 10 ай бұрын

I also have a unit with the filling loop already attached. (However, on the front of the boiler it refers to my using the green lever which mine doesn't have! That was frustrating!) I don't understand why the filling loop is not installed permanently as there are shutoff valves and the video says the installer may have "already fixed the filling leak and left the filling loop in place". Since repressurizing is something that often is needed and is quite normal, why take it off at all? Any ideas?

@stfuplsok 7 ай бұрын

@@TravelingToday-yu9gv it is by law not to install it permanently for safety reasons.

@farhanaakther2226 11 ай бұрын

Thanks

@marciadurrant-aris5940 3 ай бұрын

What is the solution if you over pressurize by going into the red area. Hot water continues to run through the pipes non-stop. The Pressure Gauge get very hot and fogs up.

@Dw-vb4fm Жыл бұрын

Wheres the pressure release valve i need my pressure bk down

@luscifer_reborngg2193 2 ай бұрын

Anyway get the blue in stiff jeez having no luck with it what best way etc

@Summer-rb2ol Жыл бұрын

Very clear video. However, for some reason my blue valves were the other way round, so bit of a shock

@daveshaw5293 Жыл бұрын

Just turn them the other way then 👍

@Summer-rb2ol Жыл бұрын

@@daveshaw5293 oh really! Would never of thought of that 🙄🙄

@daveshaw5293 Жыл бұрын

@@Summer-rb2ol clearly not as you said bit of a shock lol

@lissieloveskitties Жыл бұрын

Ours are black? Worked the same although no removable section after

@Summer-rb2ol Жыл бұрын

@@daveshaw5293 it was the first time I had done it. Tbh, your comment makes no sense

@vickilee8208 Жыл бұрын

How hard to you have to pull the green lever cos mine don’t seem to wanna give and I darent force it

@stfuplsok 7 ай бұрын

don't* force

@chriscotoner9191 Жыл бұрын

What iy your pressure is too high? How are we going to turn it back down?

@alihassanahmed3539 Жыл бұрын

Bleed the rads take water out

@AkosuadankwaTV Жыл бұрын

What if it rises too high what do you do

@stfuplsok 7 ай бұрын

Bleed the radiator/s.

@hug4576 Жыл бұрын

Mine has none that it’s 2 black and yellow

@g-g__ Жыл бұрын

same lmao, if you find out how to fix it please lmk

@hug4576 Жыл бұрын

@@g-g__ it’s because I’ve got insulation systems fitted in one of my room upstairs,there’s something like 🚰 and black think same as the one under the boiler need lifting and turn the tap on at the same time check the pressure on the boiler as the video saying don’t let it pass middle of 1,I hope this solves the problem as it’s done mine 🙏

@lukea136 Жыл бұрын

Same here, and I share 'not george's sentiment, LMAO! No valves for refilling at the boiler. Thanks to 'hug', we clicked that we have a tank upstairs, blue valves did nothing, but there were two black on a braided connection which filled it up. Not one KZfaq video with this scenario! Took about an hour to figure out in total! 😂

@adelejones5059 Жыл бұрын

Can anyone help , I have tried this and it has worked before but it’s not this time. Any suggestions, as I know you here the water as it fills and nothing!! Could be air in pipes , any suggestions 😬