Bead making made easy! | Quick and easy way to make terracotta round beads

Рет қаралды 44,117

3 жыл бұрын

Few links to the materials. Hope you find them useful. These are only suggestive, not particularly where I bought my tools. I have accumulated them over time mostly from brick and mortar stores.
• CLAY I USE: Laguna red low fire earthen ware clay without grog. (EM106 or EM334 wards)
• Firing (Bisque) at cone 06. (I don't own a kiln, so I take my pieces to a pottery studio close by and get it fired in an electric kiln there)
• Wire used: Nichrome wire gauge 28 for stick beads and ghungroo beads; gauge 26 for earrings and 24 for pendants.
Gauge 24 (India): amzn.to/2ygy4CJ
Gauge 24 (USA): amzn.to/39xZReS
Gauge 26 (India): amzn.to/33W8w9X
Gauge 26 (USA): amzn.to/3axi8dx
Gauge 28 (India):
Gauge 28 (USA): amzn.to/3azYaPu
• PAINTS: Acrylic paints (BRANDS: Master's touch, folk art , Liquitex and Anitas) - USA
• BRUSHES: 00,2,4,6 sizes round tip synthetic brushes. I also use liner brushes 20/0 to paint finer details ( bit.ly/2ZSL7Ez ) - USA
• VARNISH: amzn.to/3av95tV - USA
bit.ly/2ChWDlj - Matt (India)
bit.ly/3fLfjrd - Glossy (India)
• NEEDLE TOOL: In most pottery tool kits the needle tool is included as part of the kit. (Buying these individually will be expensive)
(India): amzn.to/2WTbKcC
(US): amzn.to/2UNOFpd
• Pottery tool kit with a fettling knife: amzn.to/39wO8NA
• Pottery tool kits that can be used for those starting of (India): amzn.to/3dCUhey
• Fettling knife (India): amzn.to/3dGnZ2j
• Ball tools (India): amzn.to/2WZlBxF
• Silicon tip finishing brushes (India): amzn.to/2JqlC5J
• Wooden modelling tools (India): amzn.to/2UuyZZ1
• Hole cutter (USA): amzn.to/2UHb2MQ
• Fettling knife(USA): amzn.to/33Wu8Tz
• Jhumka or quilling mould (India): amzn.to/3dIWkxx
• x-acto knife (India): amzn.to/2JtofE6
• Adhesive used for studs: E6000 (US) or Araldite (India)
*************************************
This is not a promotional post.
*************************************
Ways to get in touch:
Email: paintedearthbyneha@gmail.com
Facebook: mypaintedEarth
Blog: nehagopinathpillai.wordpress.com
Instagram: / paintedearthbyneha
Pinterest: / mypaintedearth
KZfaq: / paintedearthbyneha

Пікірлер: 174

@svtuitioncentre4276 Жыл бұрын

Super super excellent 👍👌

@ramyaraj4732 Ай бұрын

I like this type, too much of this type thank you so much ma'am 😊❤

@narayaniartjewellery7696 10 ай бұрын

Thanq Neha for this sharing this easy technique

@platha7067 Жыл бұрын

Vry nice! Keep it up!

@user-tw9ls4ut3r 9 ай бұрын

Thank you, your method is very helpful.

@kylehunt64 Жыл бұрын

Love !

@rajnitrisal4814 3 жыл бұрын

I also have been making the beads this way. The difference that I keep all the unfinished pieces under wet towel to avoid the dryness. That too works perfectly well.

@nehagopinathpillai 3 жыл бұрын

Great tip! Thank you so much :)

@jaanuj.v.2482 3 жыл бұрын

Very useful one mam thank u

@supprajaraman7453 3 жыл бұрын

I usually follow this practice!! Quite doable as you referred :) thanks for showing this :)

@nehagopinathpillai 3 жыл бұрын

You are most welcome! It indeed is simpler to make beads this way.

@ManyaB.S Күн бұрын

Very useful.... Tqsm ❤🙏🏻

@Gajachannel 4 ай бұрын

Your smiles so cute sis.

@Gajachannel 4 ай бұрын

Thank you neha. Your methods are so nice and cute. Once again thank you.❤😊

@nehagopinathpillai 4 ай бұрын

So glad you find them useful.

@madhdamm2888 5 ай бұрын

great work.thank you.

@briskybrisky3246 Жыл бұрын

simple method.. tqq so much mam

@asishmerinjoseph6847 3 жыл бұрын

I love watching you work. I use polymer clay and these techniques work perfectly well with that too.

@nehagopinathpillai 3 жыл бұрын

Thank you so much. Good to know it works on polymer clay too :)

@tteridsouza9090 3 жыл бұрын

Wow... Excellent method. Thanks

@nehagopinathpillai 3 жыл бұрын

Most welcome, glad you liked it:)

@ritarajgor8317 3 жыл бұрын

Thank you for sharing this method ,I will also try it 👍

@nehagopinathpillai 3 жыл бұрын

Sure, please do. You might find it easier.

@shivapriyasubramaniam3540 3 жыл бұрын

Very easy method it helps beginners a lot , thank you for the video

@nehagopinathpillai 3 жыл бұрын

You are welcome! :)

@abiramisundarirajkumar679 3 жыл бұрын

Hi Neha. This is very easy and quick process to get maximum number of beads in a short time. I too use this method. Wile doing rolling part, I would choose 2 or 3 beads at a time to roll it. Then it will be super quick.

@nehagopinathpillai 3 жыл бұрын

Thanks a lot for the tip AbiramiSundari😊 After all these years, I still am super slow with making beads. So I go bead by bead and roll it. Bead rolling is a skill & if you are able to roll 2-3 beads at a time that's wonderful!

@archanapatil1233 3 жыл бұрын

Very easy and nice method and your plate in which u kept beads is very cute

@nehagopinathpillai 3 жыл бұрын

Thanks a lot 😊

@kamanamuley4232 3 жыл бұрын

Yes it does work. I have been doing it this way for a long time now.!😊👍

@nehagopinathpillai 3 жыл бұрын

That's good to know Kamana, it's indeed a quicker method.

@Sujatha0240 3 жыл бұрын

Its a good idea really.This method is very helpful to me. Thank you Neha👍☺️

@nehagopinathpillai 3 жыл бұрын

Most welcome 😊

@neerunduvi7483 3 жыл бұрын

This is just what I wanted at this moment 😃😍

@nehagopinathpillai 3 жыл бұрын

Yayyy! Glad this helped!

@madushani1904 3 жыл бұрын

Bestt ...Mam👍👍😍😍

@nehagopinathpillai 3 жыл бұрын

Thank you so much :)

@durga5128 3 жыл бұрын

Nice👍👍will try this way for sure 🙂

@nehagopinathpillai 3 жыл бұрын

Sure 😊 Please do. You may find this a lot quicker and easier.

@RamaDevi-du9lp 3 жыл бұрын

Thank you neha mam. I tried that module method it makes my work easy. Now I will try this also mam. I think this method will make much more easier than that method. Once again thanks for sharing this type of methods mam.

@nehagopinathpillai 3 жыл бұрын

You are most welcome. I am sure you will find this method earlier. Please do try:)

@ujvalapragathi 3 жыл бұрын

Yes , this is best way for me, dng same from past 6 years

@nehagopinathpillai 3 жыл бұрын

That's good to know! This indeed is an easy way.

@shalukr464 3 жыл бұрын

Very useful mam... Thank u...

@nehagopinathpillai 3 жыл бұрын

Welcome 😊

@RainchuBhavani 3 жыл бұрын

Thanks much.. Very useful 😊

@nehagopinathpillai 3 жыл бұрын

Most welcome 😊

@jaykashyap6238 3 жыл бұрын

thank u for sharing

@nehagopinathpillai 3 жыл бұрын

My pleasure!

@brinman-cakes 3 жыл бұрын

Nice one mam..☺️

@nehagopinathpillai 3 жыл бұрын

Thank you so much! :)

@suhasinijohn1441 Жыл бұрын

Does fevicryl shilpkaar clay need baking please help me thank uou

@RamPrakash-vu2rp Ай бұрын

Mam where u buy the nicrome wire

@mozhi741 Жыл бұрын

Wt is the consistency of the clay plz tell me coz my beads are cracking while put the hole

@bhargavivivek7703 Жыл бұрын

Hi Where did you buy clay

@mbagauwalarishidogra Жыл бұрын

which wire u talk about

@rathinamalam4348 3 жыл бұрын

Hi Neha this is very useful n base for terracotta jewellery but measurements I don't know honestly U showed d method which is very important thing thanks Neha I'll try with out measuring each bead😀❤️

@nehagopinathpillai 3 жыл бұрын

Thank you so much. I would suggest trying it with the smallest cutter you have. Measure that bead on a scale. If the bead is too small, then go on to next size cutter. All you need in this is an even size slab.

@rathinamalam4348 3 жыл бұрын

@@nehagopinathpillai ok Neha I try👍

@krithikasrinivas2023 3 жыл бұрын

Thank you so much for the this tip mam. What is that scale which you are using for slab thickness?

@nehagopinathpillai 3 жыл бұрын

You are most welcome! It's just a wooden ruler. The thickness is 3mm

@Larasascreator 3 жыл бұрын

Hello mam hope you fine and good... This is awesome very useful idea to always need not to depend on mould because I'm doing this way to make my beads😊😛.. Thank you

@nehagopinathpillai 3 жыл бұрын

I am good and you are too:) Most welcome 😊

@himaparvathi7015 Жыл бұрын

Hai Madam I want to try make jewellery from టెర్రకోట clay... But I don't know I get terracotta clay from where nd how

@anantadesai6211 Жыл бұрын

Hii Neha...i am following you and also making terracotta jwellery. But i have been stuck on painting part. I don't know why but my paint won't get stick to the surface or sometimes its not done the way which i wanted. Like it's just went away from certain parts and sometimes some blanks i couldn't fill with paint. And even sometimes its mixed with other design or something. Can you suggest me some of your painting tips or videos?

@greeshmatam7056 3 жыл бұрын

Very useful technique Neha !! I have been using this method for d past 5 years .. I use different sized pen caps n almost all parts of a pen can be used to get equal sized beads ..n even cookie cutters are Better over pencaps coz most of d times d clay gets stuck inside d cap n we dot get equal size beads n moreover it disturbs d speed of d work .. so it’s good to use cookie cutters as they are open on either sides !! Thankyou so much for d video ☺️☺️please make a video of making ,painting n assembling aGrand Temple jewellery set Neha 😃😃

@nehagopinathpillai 3 жыл бұрын

Thank you so much for sharing that Greeshma. I will surely give Temple jewellery a try. I have been asked this multiple times so I will make a video on that.

@greeshmatam7056 3 жыл бұрын

@@nehagopinathpillai 🙏🏻❤️

@umamageshwari1151 Жыл бұрын

Madam, pl share clay purchase link. Couldn't find EM 106

@deepaseethalakshmi7335 3 жыл бұрын

Thank you so much for showing us an easy method to make even sized beads. 👌👌

@nehagopinathpillai 3 жыл бұрын

My pleasure 😊

@saravanandevi 3 жыл бұрын

Can you make a video on clay preparation? How moist or dry it should be?

@nehagopinathpillai 3 жыл бұрын

kzfaq.info/get/bejne/p7Fjgpl33uDaZ5s.html kzfaq.info/get/bejne/eZuopJx_0rmZkmQ.html I don't make my own clay. I buy them in a moist form in 25 lb bags. But the two videos above is how I store and reclaim clay. Hope you find it useful.

@saravanandevi 3 жыл бұрын

@@nehagopinathpillai Thank you😇♥️

@sankarraj6311 3 жыл бұрын

While drying theses beads the under part of the bead becomes flat,can you please suggest a way to dry the bead

@nehagopinathpillai 3 жыл бұрын

That ideally should not happen. If it does then it could be because the clay is way too wet or you may have to place the bead more gently. I usually spread the beads out to aid even drying. Never stack them one above the other. High chance of the shape getting distorted.

@lewinumnaanum 3 жыл бұрын

I wanted to do terracotta jewellery, where can I get the clay and tools in bangalore

@nehagopinathpillai 3 жыл бұрын

You can look up clay-joy.business.site/ for clay and firing needs.

@anugrahas5671 3 жыл бұрын

Mam.any easy tips and tricks to make gungroo beads and stick beads

@nehagopinathpillai 3 жыл бұрын

You could try the same method maybe with a smaller cutter or thinner slab.

@tamaragrove5879 Жыл бұрын

how do you dry them out before bisque firing?

@tamaragrove5879 Жыл бұрын

I just found a video where you answer this question! Thank you

@youvashree3525 3 жыл бұрын

Hii Mam how to make beads for beginners&which clay is best to buy

@nehagopinathpillai 3 жыл бұрын

I would suggest this method for beginners. If you live in India, you can check locally for clay. Back in Bangalore I would buy clay from clay-joy.business.site/ You can also check: amzn.to/2ZdKEwP Here in the US I buy use a brand called Laguna. In that I currently use EM106.

@zankhanashukla6766 3 жыл бұрын

I have winsor and newton varnish spray, which I use for acrylic paint. Can I use this varnish for terracotta jewellery?

@nehagopinathpillai 3 жыл бұрын

I think you can. I do prefer a varnish that can be brushed on. But given that you have a spray one for acrylics, you can go with it.

@zankhanashukla6766 3 жыл бұрын

@@nehagopinathpillai Thank you so much, you are super talented 🙏🏻

@nehagopinathpillai 3 жыл бұрын

@@zankhanashukla6766 That's very kind of you :)

@rajimurugesan5592 3 жыл бұрын

Mam I asked dought in fixing stud post in mail you told me to use araldite with right proportion of resin and standard it's working really good thanks you lotsss mam❤️

@nehagopinathpillai 3 жыл бұрын

That's good to know. Glad it worked for you :)

@rajimurugesan5592 3 жыл бұрын

@@nehagopinathpillai ❤️❤️

@reshup7419 3 жыл бұрын

Without kiln can we bake them for home use

@nehagopinathpillai 3 жыл бұрын

Sorry but I have no idea how it's done without a kiln.

@priyapriyanka2268 3 жыл бұрын

Can you please give an a idea for how to bake terracotta jewellery for without out klin.... If you have a time please will make one video... It will really help for us.... Because we don't have that much of facilities in our places....i tried some methods like (fire bake, salt...), but this are all didn't work for me

@nehagopinathpillai 3 жыл бұрын

I have no idea how it's done without a kiln. Sorry

@user-rb9ii5st9x 3 жыл бұрын

Any tips on baking, I tried baking for first time by my own in a mud pot using charcoal, my pendants, few studs got broken. Plz give me any suggestions on this

@supprajaraman7453 3 жыл бұрын

Hi! Make sure you are using good amount of rice husk/wooden shreds in between the jewel pieces.. also please dont over bake them.

@user-rb9ii5st9x 3 жыл бұрын

@@supprajaraman7453 i use wooden shreds too. How long it needs to bake? I knead the clay every time before making something still air bubbles getting formed, How to avoid air bubbles?

@nehagopinathpillai 3 жыл бұрын

Hello! I am not sure of any home based methods and I don't recommend it either. Usually when clay burns, the other things present in it such as Sulphur, organic matter etc tend to also burn giving out fumes which isn't healthy to breathe. Especially if there is no proper ventilation. Also, the results aren't always reliable. You might get damages, the piece would be brittle, and the worst part is if it gets damaged in your customers hands. It's best if you get it done properly. If you live in Bangalore you could get it done here: clay-joy.business.site/

@nehagopinathpillai 3 жыл бұрын

These videos might help, check it out: kzfaq.info/get/bejne/p7Fjgpl33uDaZ5s.html kzfaq.info/get/bejne/eZuopJx_0rmZkmQ.html

@user-rb9ii5st9x 3 жыл бұрын

@@nehagopinathpillai thanks alot.. I live chennai, will check out here for same

@nandhinicreations4766 3 жыл бұрын

How to order/book Terracotta set frm u?

@nehagopinathpillai 3 жыл бұрын

Currently not active, but will notify once I get back to active selling.

@Anshuofficial369 3 жыл бұрын

Can u suggest which clay is better and available in Amazon or flipkart

@nehagopinathpillai 3 жыл бұрын

clay-joy.business.site/ amzn.to/2ZdKEwP Give these a try.

@Anshuofficial369 3 жыл бұрын

@@nehagopinathpillai Tnku Sis...😍😍😍

@vijayaranibalasubramanian9867 3 жыл бұрын

Very nice idea. Can you pls tell me where I can get clay for Terracotta jewelry in India. Thank you.

@nehagopinathpillai 3 жыл бұрын

Thank you so much! Back in Bangalore I would buy my clay & get it fired only from clay-joy.business.site/ You can also look up: amzn.to/3b9z7UN

@vijayaranibalasubramanian9867 3 жыл бұрын

@@nehagopinathpillai thank you so much 🙂

@sudhansudhan4722 3 жыл бұрын

One request you can upload that baking terracotta pendants

@nehagopinathpillai 3 жыл бұрын

I don't own a kiln so I get the firing done a Pottery studio near by. kzfaq.info/get/bejne/g8CUjNJ2l8ndoX0.html

@sudhansudhan4722 3 жыл бұрын

Ok thank you so much

@sheetalkhidake6146 3 жыл бұрын

Hi ,can u tall me from where to buy this clay in Usa . I live in az Thank u

@nehagopinathpillai 3 жыл бұрын

I buy it locally here. I just pick up the clay so that I don't have to pay shipping which can be very costly. I would suggest looking for a ceramic studio locally and buying clay. You can look for Low fire earthenware clay without grog. Most brands like Laguna, aardvark etc are good ones.

@sheetalkhidake6146 3 жыл бұрын

Thank u

@tarakiran3968 3 жыл бұрын

Mam when i roll clay for pendent,It getting cracks wat should i do...

@nehagopinathpillai 3 жыл бұрын

It could a result of clay drying out. You could add a little water, knead it and then use. Kneading helps make the clay more pliable. This might help: kzfaq.info/get/bejne/eZuopJx_0rmZkmQ.html

@tarakiran3968 3 жыл бұрын

@@nehagopinathpillai thnku mam😍

@nivedaravi2241 3 жыл бұрын

Good idea. Should be fast. I will try and see.

@nehagopinathpillai 3 жыл бұрын

Please do Niveda, would be a lot quicker.

@sindhum9724 2 жыл бұрын

Mam where you buy this scale.if you have any link please share the link mam

@nehagopinathpillai 2 жыл бұрын

These are just dowels I bought from walmart. Back in India, I would use the scales from clay-joy.business.site/

@shrijalp9212 3 жыл бұрын

Ma'am where you got those tiny cookie cutters!!??

@Rashmisharma-rn1cx 3 жыл бұрын

These are available at Amazon I have These from Amazon india

@nehagopinathpillai 3 жыл бұрын

I got one set in Bangalore long back. From a store called MK fancy. I bought another set here: bit.ly/2OC3tb9

@reshup7419 3 жыл бұрын

How much does the clay cost

@nehagopinathpillai 3 жыл бұрын

I pay about 14 USD for a 25 lb bag of clay

@pattiradha5515 3 жыл бұрын

Please tell,What kind of clay have you used.where did you purchase.

@nehagopinathpillai 3 жыл бұрын

I live in the US so I buy my clay locally here. I don't get clay shipped as the shipping cost would end up being more than the cost of the clay itself. Back in India, I would buy clay at well get it fired from here: clay-joy.business site

@pattiradha5515 3 жыл бұрын

This link page is not working mam

@nehagopinathpillai 3 жыл бұрын

@@pattiradha5515 clay-joy.business.site/ This should work.

@balajiu8951 3 жыл бұрын

hi sis.nan beginner tha so .painting yenakum varala brush marks theriuthu sis.what can I do.painting techniques sollunga

@nehagopinathpillai 3 жыл бұрын

You can watch these playlists, hope they help. kzfaq.info/sun/PLrLYTN-iFD14m7yWS0U_9mBpsD9aUHuKp kzfaq.info/sun/PLrLYTN-iFD15V0t6INj8wqIX2F22XViz6

@balajiu8951 3 жыл бұрын

@@nehagopinathpillai thank u sis

@ramuthaiswahath0173 3 жыл бұрын

Mam the clay you are using is you made or else shopped mam

@nehagopinathpillai 3 жыл бұрын

I buy the clay. I don't make my own. The one I use is listed in the description box of the video.

@ramuthaiswahath0173 3 жыл бұрын

Thank you for your replay mam

@aryap30 3 жыл бұрын

Thank u neha mam,even i use similar method,but the only difference is i am using pen cap, Mam need one help can u pls make one video on temple jewellery with mold.but specifically for its beads part,like if we want to use small peacock made in mold,or small ganesha made in mold,n then how to join them with u pin first n then fire it.

@nehagopinathpillai 3 жыл бұрын

Thank you so much for sharing that. A pen cap too would help in getting smaller size beads. Thanks for the tip. With regard to temple jewellery I will surely try to make a video on that. I may not be very good at it though. I usually don't make very traditional temple jewellery. But will give it a try for you.

@aryap30 3 жыл бұрын

@@nehagopinathpillai thank u dear, If u r saying u r not good in temple jewellery then where we will go dear,u r the best dear

@aryap30 3 жыл бұрын

N u had one video on Instagram using slip trailing nozzle,but which u r using is different than whose link u shared to get it in india.is that same one available here. N u said it will become darker after firing can u pls explain that piece,type, to us .Pls

@nehagopinathpillai 3 жыл бұрын

@@aryap30 you are very kind.I will try my best.

@nehagopinathpillai 3 жыл бұрын

@@aryap30 it's a similar one. I don't use the same bottle for clay slip and glazes. It might contaminate the glazes. I think in India you can look for henna bottles. That works. I have three such bottles from which I keep one for clay slip and the other two I use for glazes. Once the underglaze has dried , I apply a clear glaze and fire it again at cone 04. that turns then into a glass like surface (same way how ceramic cups, plates etc are made). But these pieces have to be fired in an electric kiln at specific temperatures. Home based method won't work.

@prashantimahankali7902 3 жыл бұрын

Hi Neha..any online link for getting those scales

@nehagopinathpillai 3 жыл бұрын

These are just regular wooden rulers I got from dollar tree.

@prashantimahankali7902 3 жыл бұрын

@@nehagopinathpillai i mean of different thickness

@nehagopinathpillai 3 жыл бұрын

@@prashantimahankali7902 you could use dowels. I just bought a packet of square dowels from Walmart. I can't find a link though.

@handmade23923 3 жыл бұрын

Hello mam. am a beginner. When I tried beads making, the sides got cracked. What may be the reason.

@nehagopinathpillai 3 жыл бұрын

Hello! Being a beginner, it might just be a matter of some practice. But you could also check if you clay is moist and pliable enough. Please don't work under a fan. That would dry your work in no time.

@handmade23923 3 жыл бұрын

@@nehagopinathpillai Thank you so much mam. For replying.

@swatikusnur9720 3 жыл бұрын

Nice .I m interested to learn this work can u help me

@nehagopinathpillai 3 жыл бұрын

Thank you so much I do take online sessions. Please send me an email on paintedearthbyneha@gmail.com

@bhargavibharadwaj9295 3 жыл бұрын

Mam i try acrylic colour but it is coming like this

@nehagopinathpillai 3 жыл бұрын

I have replied to your email. PLease check. Thanks

@bhargavibharadwaj9295 3 жыл бұрын

@@nehagopinathpillai thank u mam i ll send the clear pic mam

@shwethaswamy8992 3 жыл бұрын

I am also make terracota jewelry, how to sell mam tell me some tips mam

@nehagopinathpillai 3 жыл бұрын

You can try marketing your products via social media platforms. If you are registered you can also look to online selling via e-commerce platforms.

@shwethaswamy8992 3 жыл бұрын

@@nehagopinathpillai Thank you mam🥰🙏

@Sujatha0240 3 жыл бұрын

Hai Neha, i have been watching all your videos daily. You are so talented. If possible can you do mango necklace. I think most of the people will like those who love your work.😊

@nehagopinathpillai 3 жыл бұрын

Hello! Thank you so much. Glad you enjoy watching my videos. I did upload something simliar without a mold: kzfaq.info/get/bejne/heCkrJWgqZfdgo0.html I also put up a video on a leaf one which had a similar shape: kzfaq.info/get/bejne/jZabicdpq8WaZIU.html Will try to make more of these. Thanks again

@Sujatha0240 3 жыл бұрын

@@nehagopinathpillai wow thank you so much😃

@Sujatha0240 3 жыл бұрын

Also please tell me that which wire did you used for assembling the pieces together?

@nehagopinathpillai 3 жыл бұрын

@@Sujatha0240 I use a gear wire for assembling pieces after they are fired. Before firing, for the pendant and earring hooks I use nichrome wires gauges 24 and 26 respectively.

@Sujatha0240 3 жыл бұрын

@@nehagopinathpillai Thank you

@madushani1904 3 жыл бұрын

I am sri Lankan girl 😍😍😍👍👍

@nehagopinathpillai 3 жыл бұрын

Welcome to our channel!

@priyadharshini.b7682 3 жыл бұрын

But all your beads are looking same..when I do it I becomes uneven and diffrent

@nehagopinathpillai 3 жыл бұрын

Key is to maintain the slab all over in equal thickness. The thickness scales really help in achieving this. The rolling of the bead is a skill that you will develop with practice.

@priyadharshini.b7682 3 жыл бұрын

@@nehagopinathpillai tnk u mam