Beadlock Killer?! 0 PSI Test On The Lightest Street Legal Offroad Wheel! Method Bead Grip Review.

Рет қаралды 144,000

Жыл бұрын

These Method Bead grips are very revolutionary. Today, I want to push them to the limit and see how low I can go without losing a bead. The fact that you can basically get the same level of performance as a beadlock wheel in a simpler lighter package AND still be DOT legal is pretty wild.
Make sure you check out ‪@thedirtheadshed‬ and ‪@TheStoryTillNow‬ and
When you are ready save some money on Method, Yukon, Fox, Warn, Etc., click the link below. Use coupon code dirtlifestyle for 20% off your membership. You won't find discounts this big anywhere else!
ONX: webmap.onxmaps.com/account-pu...
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
DOMETIC: bit.ly/3zPPRwN
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
MIDLAND RADIOS: bit.ly/2IjmlZD
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DiRTBAG MAFIA Facebook Group
groups/34277...
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.

Пікірлер: 359

@eeassa Жыл бұрын

I run those wheels on 37" Toyo MTs rock crawling at 7psi for the last 2 years. Never broke a bead. My friends think I'm crazy but the proof is in the pudding!

@DirtLifestyle Жыл бұрын

I believe it! I rock crawl between 6-8 as well with a perfect track record 👌

@jeeperp3926 Жыл бұрын

“The proof of the pudding is in the eating”, is the actual phrase.

@jasonh4167 Жыл бұрын

I love me some proof pudding.😋

@Agent.K. Жыл бұрын

I do dune bashing at 8-5 psi. Oem rims. Not sure why people are scared!

@markfisher9016 Жыл бұрын

These don’t keep the tire from rotating and screwing up the balance do they?

@Maxx.Powell Жыл бұрын

It was great to see you at The Overland Truck Store. I’m stoked they were able to fix that Tacoma of yours! They just fixed my nanny sensor issues as well. Let’s goooo!

@HoovSteeze Жыл бұрын

Last snow wheelin trip, had a valvecore not seat all the way and by the end of the 23miles I was at 0psi and no de-bead on method bead grips. Sold me! Just aired back up and kept truckin!

@DirtLifestyle Жыл бұрын

I've had a ton of wheels come off the bead over the years. Quite a few that got a small puncher and lost air overnight. The next day, the tire had fallen off the bead just sitting there, lol. So, the fact that I've seen three flat tires be driven on with no issues and now reading your experience speaks volumes of how brilliant this product is. I've ordered two more sets...

@ChuckHolt Жыл бұрын

Hey Nate! Two of the guys in my wheeling circle runs those wheels and we snow wheel every weekend, the proof is in my channel. We are just south of you. They both run around 2 psi in the snow and have never lost a bead, one thing someone brought up thou that I never thought of is if you need to put a boot on the inside or need to do a massive repair you will definitely not be able to get the tire debeaded on these wheels, so that’s where an actual beadlock has a benefit, I never thought of this until someone brought it up. I still want a set but something to keep in mind. The beadlock is 32 bolts away from being able to get to the inside of the tire.

@Stuka87 Жыл бұрын

I have been running those same method wheels since they first came out. And I love them. As I recall, Method has a patent on the bead grip design. So you won’t see them on other brands. But method does offer several different designs in the trail series now if you don’t like the wagon wheel look.

@adamtoepfer131 Жыл бұрын

I've got a set of AlphaEquipt wheels with the "beadgrip" it's just designed differently. I've yet to see how well it functions in the real world because I've only had them on for about a month, but I'll be at Lonestar Toyota Jamboree so I guess we will see then. I liked them because they offered them in a "pizza cutter" spec so I can run my tall skinnys but still sit nice in the fenders. Plus they had a white option. I was trying to get away from the black.

@Stuka87 Жыл бұрын

@@adamtoepfer131 Which model AlphaEquipt wheels are they? I did just look, and Method does in fact have a patent on it. Would be curious how similar the Alphas are.

@adamtoepfer131 Жыл бұрын

@@Stuka87 AlphaEquipt Foxtrot "PizzaCutters". There was a GXOR special edition. But it looks like on their website the standard foxtrot has it as well.

@stich1960 Жыл бұрын

@@Stuka87 Depends whether its a design or utility patent. If it is a design patent then its a joke Could also be licensing the patent to another company

@6226superhurricane Жыл бұрын

@@stich1960 interco (super swamper) sold birddog wheels that had a similar designed safety bead they came out at least 6 or 7 years ago maybe more.

@andrewtremper8453 Жыл бұрын

Nate, really nice to see a practical review of these rims. I bought a set of them a while back thinking the same, I want to drive to/from the trail but I can’t justify legit bead locks. Thanks for the video.

@rashlaninburhan Жыл бұрын

I encourage all subscribers of this channel to like and share all videos as support for this guy. Man you helped me in my build as you can't emagine .

@octurbojoe Жыл бұрын

Had my MR701s for almost 2 years. Aired down to 8-10psi with Yokohama Geolandar M/T G003's. I've bashed them on rocks and even accidentally aired them down to 0psi and they still never de-beaded. Best wheels ever for wheeling.

@angelmvniz 4 ай бұрын

Got a full set of these beadgrips as soon as I heard about em. Best decision ever!

@flyfisher530 Жыл бұрын

Great video Nate! Would love to upgrade to these wheels someday, what a brilliant design! Thanks for sharing!

@DirtLifestyle Жыл бұрын

Thanks for watching, man! This is such a simple design, and it solves so many issues. I can't believe we are just now seeing it come to market!

@anarchyrun8253 Жыл бұрын

Thanks for the full review, I've been eyeing the Method bead grips. Looks perfect for my application.

@ThatRedMachinist Жыл бұрын

I love seeing Dave and Fred keep on with making content either by themselves or with other creators after the heart break of dirt every day being cancelled

@lit_taco4x4 Жыл бұрын

No one will believe me but I de-beaded these. I was being a bonehead though, I put lots of beans on it trying to bump up a rut. My guess is that because I have such a strong steering rack and heim rods, the wheel was the weakest part. I was at 8 PSI. That being said, I will continue to rock these!

@wontontacoadventures Жыл бұрын

Thanks for the review Nate! I’ll have to grab me a set of these bead grips one day. Keep ‘em coming.

@chir0pter Жыл бұрын

Dave’s truck is so cool, awesome vintage rig. One of those cars that you used to see a decent amount but have totally disappeared off the roads because of rust and just the fact they were cheap cars few bothered to preserve and maintain. Amazing that so much of the body is cut away yet he still kept such a density of recognizable styling cues that while not looking factory it still looks intact, nicely done.

@elsievers Жыл бұрын

Great content Nate! The Beadlocks are great wheels. I run them on my Gladiator and had them down to single digets yesterday in the snow with no problems.

@HaugenDustin Жыл бұрын

Picked up my 703 methods and 35's in December. Awesome wheels! Your previous videos inspired me to buy them!!!

@TimmyG2011 Жыл бұрын

I had a set of these Method Bead Grips and they never let me down, not even once. Even with single digit tire pressures-no problem. I would buy them again 100%.

@mattbrew11 Жыл бұрын

I have the Method 701s on my diesel JT on 39” KM3s. I was thrilled at how they were working at 9psi but I saw this video a week ago and just had an absolute blast in Sand Hollow running at 5psi doing low and some middle speed sand stuff. Unbelievable traction and everyone else in my group had regular beadlocks. Considering the weight and cost savings plus the convenience I’ll never go back to 2 hr torque-a-thons again. I do wish theyd come out with a rash ring though like Teraflex which is like HDPE or something. Thanks again Nate!

@ghernandez6457 4 ай бұрын

Damn bro Id hate to run heavy beadlocks on my RCVs D44 with 38s patagonias. I am currently running ION alloy wheels but I want to run 7 to 8 psi without risking it. You have convinced me to get these wheels.

@daviddebuhr8995 Жыл бұрын

I'm new to wheeling and just got my first Jeep (a stock TJ ). Your videos have been super helpful to me in getting started.

@UrbanOpsOffRoad Жыл бұрын

Been running method’s 704 titanium and I love them. I’m all about functionality over instagram hype. To me it made total sense going for a wheel that provides a benefit. Air the tires to 10 psi’s worry free for sure. I highly recommend beadgrips(I’m not paid by method( I wish lol))

@RyanAlward Жыл бұрын

Thanks for reminding me why I got my Methods! I run them on a 4Runner with the stock sized tires and I have aired them down to single digits in the Sierra and in Death Valley. No issues yet!

@rashlaninburhan Жыл бұрын

I liked all your videos as support for sharing, dedication, hard work. Keep them coming.

@Lifesmasher Жыл бұрын

I bought method wheels two years ago and they continue to impress me I think the 701s just look so dang good

@abnpthfdr2934 Жыл бұрын

The 2 PSI to 1 PSI overnight is exactly what you mentioned, just from cooling down sitting in the cold overnight not driving them. This is great! I currently run Method wheels on my Jeep and I like them pretty good, but the Bead Grip arre a game changer. Thanks for featuring them on your video. They should sponsor your channel!!!😉🤙🏻

@ALMX5DP Жыл бұрын

Fantastic video and review. I've had experience with track wheels that have little knurls (horizontal hashings) on the bead surface to prevent slippage, and have a set of Venomrex wheels that have similar. Havent seen the longitudinal gooves before though, looks like it should help keep that friction and pretty cool to see it work even at 0 psi.

@Josh47X Жыл бұрын

Great video! I have been looking at these wheels for a little while now for my 68 Jeepster. Appreciate the review!

@kristoferfc6525 Жыл бұрын

I'm on my second set of 701's, ran a fat Suburban with them at 16" on 33" K02's in the snow a lot, 0 psi I TRIED to throw a bead and couldn't. Poor baby got T-Boned so I bought the new Silverado ZR2, put 17" 701's on it with 35" KM3's, been down to 10 psi ton of times never needed to go lower with the truck yet in the snow, super super happy with the wheel, and to top it all off it's a lighter wheel than the factory Chevy wheel. I COMPLETELY agree with you on the compound quality being the make or break difference on the tires seating to the wheel and getting the most potential out of the Beadgrip.

@FPlacucci Жыл бұрын

As a 3rd gen Tacoma owner who's just starting their overlanding journey, I am sad to hear you are getting rid of your truck! I look forward to a video explaining your decision! Keep these vids coming, they are awesome!

@IndependenceOverland Жыл бұрын

I thought I wanted these for the next build, now I’m sure! Thanks for the video, Im glad to see it’s not just a gimmick!

@jeepspeednate Жыл бұрын

Dirt head dave is kinda a hero of mine, I'm glad to see you guys having fun together. Great video as always.

@SteveH98264 Жыл бұрын

Makes me feel better about the Method 703s I put on my Gladiator last year. Good work Nate!

@jareddodge1985 Жыл бұрын

Thanks for doing this test Nate I’m really thinking about getting this wheel

@HTRNF67 Жыл бұрын

Nice timing for your video! I just ordered a set of the bead grips for my Jeep JKU. I was going to go with bead lock rims until I started studying them. I know I will drive on the road quite a bit and I want my Jeep to be road worthy as well as off road capable. Thanks for the great video!

@mdocod Жыл бұрын

I run 315/75-16 on 7.5" wide factory rims. The wide tire on narrow rims helps hold the bead pretty well. I run ~12PSI on rough rocky roads in the summer and down around 6-8PSI when we get big snow storms.

@sangerstud06 4 ай бұрын

Thanks for the Onyx Elite code! I just ordered some bead grip wheels 703’s thanks to your video and code. 🤙🏻

@MacsSpecialitiesMotorsports Жыл бұрын

2:04 YES a ZJ. BTW love the collaboration with you and #thedirtheadshed. Looks like a EPIC time!!

@PhatboyHD88 Жыл бұрын

I have had Method wheels on my Jeep for about 3 years now and i love them , great wheels..

@shawnphillips4473 Жыл бұрын

This was an awesome Video, those rims are a game changer I need like 2-3 sets for my rigs.

@jiggyquinn5635 Жыл бұрын

Thank you. I like when people sell the technology rather than company. The companies will still get the benefit, the consumer gets knowledge.

@prorider6997 Жыл бұрын

Absolutely love my bead grips. In fact you're the reason I chose them over beadlocks.

@jeffm8882 10 ай бұрын

Awesome video. Everything explained in detail perfectly.

@tyspencer-rz7db Жыл бұрын

Great video Nate! I have a set of bead grips for my sxs. Really looking forward to testing them this year. Are you going to get into the details of what the root problems were with the electrical system on the taco?

@raullywhere3602 Жыл бұрын

Awesome Nate! You're killin it!

@DirtLifestyle Жыл бұрын

Thanks brother 👊

@NorthShoreOverland 4 ай бұрын

Very good explanation! I usually run at 4 to 5 psi for snow wheeling. And after popping beads 5 times this winter I'm really considering these.

@rrussi6118 Жыл бұрын

I got a set of those in bahia blue with 37" Micky Thompson Baja Boss MT's & never looked back. Love them, I've only aired down to 8/9 lbs of air but now I'll feel confident going even lower.

@MrMrsregor Жыл бұрын

these look awesome! the only two problems that i see with these wheels are; 1) looks very difficult to change your own tires by hand (i have been having to change my own tires because the last few sets of offroad tires i bought, the shop could not get anything more than an all terrain and they charge WAY too much for me to pay them to mount them if i buy them somewhere else) 2) they dont offer a 15" wheel with 5x4.5 lug for all of us old school wheelers

@PaulKaiser42 Жыл бұрын

They are a great little wheel 👍🏻 awesome video as always 😊

@coreycheatham06 Жыл бұрын

Never knew about those wheels, that's a great idea! Wish you would have gone to the wrecker games, sure would have liked to meet you! You're such a wealth of information.

@Kevin_604 Жыл бұрын

Running 37’s with the 701’s on my JL and they work great!

@JasonSnailer Жыл бұрын

Hi Nate and Dave. I love your channel and I miss Dirt Everyday

@FernandoDenise2558 Жыл бұрын

Another awesome video and very informative man. Just from a former Toyota technician, those PSIs will certainly change within minutes depending on the temperature inside the tire.

@JohnDoe-ud2cc Жыл бұрын

The key is also wheel width. The narrower the wheel the better the tire stays on. I destroyed the sidewall of a 37 km2 from rim to tread on a stump. I had it mounted on a 15x8, and with a 8” sidewall gash, I was able to 4 miles off-road on it and 7 miles on road without that tire moving on the rim. On the road the tire was folding over on it self and throwing tread, but the bead held the whole time.

@TwoFeatherChannel Жыл бұрын

the disadvantage is that it's still a traditional wheel when it comes to installing a tire. you will have to take it to someone or use a shop machine to install tires. that's what I like about the Beadlock style, it allows you to install tires yourself at home. I've had too many tire installers in the past mess up lug nuts on traditional truck wheels to where I remove the wheel myself and bring it to them to install a tire.

@mikewhitman745 Жыл бұрын

Maybe, but they are legal to use in all 50 states so that's a tradeoff huh?

@bagelsgarage Жыл бұрын

With a tire that big it would be easy to mount yourself at home. Couple prybars and dish soap and you are good

@dangermtbbronco Жыл бұрын

Great video! I'm running the Method bead grip 705s and ko2s and after watching your video I may have to try below my comfort zone of 14 psi 😂

@clifford_overland Жыл бұрын

Great video! I have the Method bead grips on my super duty weighing in at 10k and haven't gone below 20psi cause I've been chicken and haven't done a test run at lower psi. I feel now I could get away with a lot less, thanks again. Test run to come tho.

@Skinflaps_Meatslapper Жыл бұрын

You should be able to half that safely in soft terrain. Your minimum psi is going to be way different than his though, it has everything to do with how much weight is on the tire. Your truck will likely pop a bead at 5psi or more whereas his could run just about flat without issue. Run what works and don't get hung up on a number.

@kenlchambers Жыл бұрын

Thanks for this. I ordered a set last night.

@corksauve4949 Жыл бұрын

I've had a set of these for a couple of years now. And love them. I didn't know how they would do below 10 psi. so I always stayed at about 12 psi. Now, I'm ready to set them to 10 psi or maybe lower. Thanks for a great video.

@mikewhitman745 Жыл бұрын

Sometimes it's better to experiment and figure things out for yourself than it is to wait around and be told what to do.

@corksauve4949 Жыл бұрын

@@mikewhitman745 No one told me what to do. I usually go out with just me and my wife. So, I stay on the safe side.

@skumancer Жыл бұрын

Have been running beadgrips since 2019 with my KM3s and I love them. The only thing I regret is not getting a 5th wheel (spare) when I got the 4 original ones...the price has doubled since I bought them.

@stevenpeterson7234 Жыл бұрын

Awesome truck and awesome video Nate!! What stronger your Marlin front end or Dana 60 straight axles?

@skidroseracing Жыл бұрын

As a tire person, I have always disliked the inner bead on the bead grips. They can take a long time and a lot of tricks to break loose with a tire machine... But then I saw you potentially had an inner bead slightly slip loose and you changed my mind. That would have been a lot worse with a traditional inner bead. Turns out that the inner grippy bead is worth it! Still much easier than dealing with traditional bead locks. I definitely want these one day!

@hseriesonlymonctonnb1181 Жыл бұрын

Daves tires are maxxis Razors in this video 100 percent we discussed it in his video about this day

@phlfly10 Жыл бұрын

Just got methods as you said I found a good deal, it's happing on specific wheel style once in while

@granitesand78 Жыл бұрын

I have the hutchinsons on my xj and love them. I looked for these methods for a 15x8in and couldn’t find them but look great. Nice video! Btw would be nice to see you test these in mud and rocks. I used to run my standard wheels at 3psi all the time in snow

@auyocross72 Жыл бұрын

I looked at these too, but was also went a different direction since they don’t come in a 15”

@slamboy66 Жыл бұрын

I use self tapping screws on my trail rig like on my '79 Malibu for wheelspin. When on icy snow I run them into the tread for more traction. Get the slotted ones, they bite better.

@MrDzaster4u Жыл бұрын

Thanks for the info.

@TannerFarrand Жыл бұрын

So sad you're selling it! Glad you got your hands on one to show us what it could do!

@Skiridr22 Жыл бұрын

That is some serious snow 😮

@psycho-nutkase9233 Жыл бұрын

"Icon Rebound Pro" uses a different Bead Lock method of rounded bolts around the the inner side of barrel to retain the bead to the inside of the lip on the out side and are DOT approved. Edit: I'm currently running them on my rig , and I paused to type a second to early before you mentioned them. 😂

@deadgameguns Жыл бұрын

Those method bead grips are impressive. You should lengthen the off road wheeling footage when you drop vids…I’d stay tuned in for it.

@Lukaslevanen1435 Жыл бұрын

I have a set of those bead grip wheels on my diesel Colorado zr2 and love them. Air down and go without worry.

@jake-mv5oi Жыл бұрын

I welded some 3/16" rod to my inner bead to keep my tires on. No problems yet.

@wareskentucky Жыл бұрын

i love that mazda we used to have uno of those, exactly the same

@AntiPattern328 Жыл бұрын

The other really nice thing about the bead grip is balancing! Generally balancing beadlocks is nearly impossible so you always have a shake on the road.

@Skinflaps_Meatslapper Жыл бұрын

The downside to the bead grip is the same issue...balancing. With a beadlock, your wheel isn't going to spin inside of the tire, it's locked down on the bead. With the bead grip at really low psi, the wheel will absolutely spin inside of the tire. So if you have them balanced and go wheeling, they won't stay balanced for long. If you can find a tire shop that will balance beadlocks for you, they're a lot more likely to stay balanced.

@ultra4suzukisamurai679 Жыл бұрын

I wish they made bead grips in a 15” wheel

@zaphods2ndhead193 Жыл бұрын

There is one other option you didn't mention. Icon Vehicle Dynamics wheels with the Innerlock Technology. So that makes 4 options for bealock like capabilities. Beadlock, Beadgrip, Rock Monster and Innerlock by Icon. IMO, except for the weight hit, the Rock Monster wheels are the best because it locks both inner and outer beads but that is only for hardcore enthusiasts. For everyone else I think these Method Beadgrips look great!

@GizmodoMN Жыл бұрын

Those are mentioned, although not by name, at 14:45.

@ace95835 Жыл бұрын

I used to do tire work on big machines and one day, I got called out to do 2 18.00-33's on a mine truck that had lit on fire and burned until they exploded. It took my partner and I 2 days in the Utah snow to get them replaced and the machine back into service. I told you that story to add some perspective; I would much rather do all that again, than dismount a single beadgrip wheel to do a flat repair. These wheels are absolute beasts.

@oOAltoOo Жыл бұрын

There's also the coyote style internal inflatable double beadlocks, you still get some impact protection even running down at 0psi.

@jfreakinl4719 10 ай бұрын

I grabbed a couple sets of bead grips for my GX470 and my buddies Tacoma. We love them on our wildpeak AT3w's. Right to lords lake loop road lol

@heavymonty Жыл бұрын

someone needs to do a test of how much force a tire machine applies to break the bead of a traditional setup vs the method locks vs gorilla tape vs etc..

@davelentz7888 Жыл бұрын

I'm sold. Great video.

@DirtLifestyle Жыл бұрын

Thank for watching! Good luck with the new wheels, you will love them.

@Cornell1 Жыл бұрын

Ran my 17 ford raptor on stock wheels/tires at 9 PSI on trail, surprisingly no issues

@hotdog7214 Жыл бұрын

Hell yeah. I drive past overland everyday on the way to work

@JKURR Жыл бұрын

Thank you for the info. When are you going to look into portal knuckles. I’d like to get your take on ‘em. TIA!

@DirtLifestyle Жыл бұрын

Portal knuckles for which application? Like an upgrade for the portals on my Samurai? Or something else?

@TheDefenderSisu Жыл бұрын

Just went to the site to look for so bead grip wheels and they don’t make any for the new defender 110. Nate if you could suggest it to them I would appreciate it. I have a 2020 Land Rover Defender 110 P400, that is the straight six engine. We will be taking it to Alaska next year on a bucket list trip I have always wanted to do, so I getting it ready for it. Thank you Nate much appreciated. And keep up the great work you do.

@patrickmyersjn8455 Жыл бұрын

NATE, I have AVE beadlocks on my 2004 Rubicon, 5x4.5 bolt pattern, from what I understand they are DOT complient. I do not believe the company does not make those wheels in that bolt pattern dimension any more. Great content.

@jamesb3199 Жыл бұрын

Put bead grips on our 4Runner, I’ve not taken them to the single digits yet but this gives me more confidence in them

@BadlandIndustries Жыл бұрын

100% agree with the one piece vs the 32 bolts on the icons. I made the choice to go with the icons simply for that extra .01% security I wouldn't have my 40in tire debead on me. Well at least the outer bead lol

@KTMcaptain Жыл бұрын

I have the 703 methods. Love the look and been happy at 10psi

@Rowdyrigs69 8 ай бұрын

Wait dave from Dirt Every Day? That's so cool!

@madcratebuilder Жыл бұрын

I have Alpha Commands with a bead knurl that I've run down to 8psi in sand and snow. I'll try lower and see what happens. Thanks for the vid, great job.

@M.A.S.-SuperiorService- Жыл бұрын

without load on front axle the cv was at its max extension that plus turning the wheel made it so that it maxed out the joint, binding thus breaking

@vitaminb4869 Жыл бұрын

The most important thing to hold the bead is to get a narrower wheel relative to tire width. I've never lost a bead in a decade of wheeling. 12.5" wide tires, mounted to 8" and 8.5" wide wheels. I would not go wider. My standard pressure is 10psi, no matter if it's rocks or just cruising on FSR. Deep snow I drop it down to 5psi. I haven't tried lower, but I wouldn't be too surprised if I can go down to 2psi with no problems.

@hjalmarfossi5728 5 ай бұрын

I wanna make sure the next owner really loves this truck 😂😂😂

@philip4x4guy Жыл бұрын

Did you have a mark on the wheel and Tire to see if the wheel was spinning in the tire at all? I love the idea, for a multipurpose rig especially

@FerociousSniper Жыл бұрын

Bro, you might have just saved me hundreds of dollars. Thank you.

@Intentsrig 5 ай бұрын

Recently aired down to 6psi for some snow wheeling on the rubicon with the beadgrip 701’s. Went well all weekend! Apart from still getting stuck haha.

@jordantrujillo293 Жыл бұрын

My coworker has these on his truck, told me they’re almost impossible to dismount. I went to work on them, took me a good 20 minutes just to get the back bead to pop off the wheel. These wheels are serious, they grip the bead like no other!!

@DirtLifestyle Жыл бұрын

Definitely need a tire machine to dismount, lol. This is not something that can be done with a heavy truck and a highlift jack like a traditional truck wheel.

@jordantrujillo293 Жыл бұрын

@@DirtLifestyle this was at a Discount Tire, I had to put metal air chucks between the bead seat and the tire bead to hold it back all the way around. Then I was able to get the tire bead to pop over the wheel hump that’s designed into the bead grips. I’m definitely going to order a set this winter!

@Thexkidd Жыл бұрын

This scares me.

@andyvang2522 Жыл бұрын

@@jordantrujillo293 the local Indian shop did mine with ease lol

@jordantrujillo293 Жыл бұрын

@@andyvang2522 it very well could be our tire changers, also they were Nitto Ridge Grapplers 10 ply.

@KansasSlim64 Жыл бұрын

TeraFlex Nomad wheels have the same thing. Not sure who had it first, but I found the Nomads first and that’s what I’m running my 285/75 KM3’s on. Usually down to 12 psi, but I ended up down to 6 psi a few times on my last Sand Hollow trip. Haven’t lost a bead yet! KM3 37’s go on tomorrow!

@TrailExpedition Жыл бұрын

Looks like I got my Icon Rebound Pros about a year to early! 😆 those are the ones you referred to with the additional hardware but no ring. I do love them though. Air down to 5 PSI often and never have lost a bead.

@DirtLifestyle Жыл бұрын

You got a great wheel 👍. If the bead grip didn't exist I would be all over the icons

@JW-cn6op Жыл бұрын

My buddy has those Icon wheels also and runs them at 3psi all the time with 40s on a Datsun.Never had any issue tbe last 2yrs he has had them.

@TrailExpedition Жыл бұрын

@@JW-cn6op I had them side loaded while my buddy was trying to winch from my vehicle at an awkward angle. I thought they were gonna pop the rear wheel off as it was pulling my jeep sideways. Never lost the bead.