Great video! Looking forward to doing this job now that I've ordered the pullers and presses.

Thanks a ton for making this content. It was very helpful for me when I changed all 8 of the bearings on my 2019 SB130. I ordered the same RRP main tool and #11 kit and also the 15mm extractor from Wheels. I didn’t realize you are suggesting #2 is required for the shock extenders until after I ordered everything. For others out there I was able to go without RRP kit #2 and even without the 8mm Wheels extractor just fine. Instead I used a combination of sockets and kit #11 to make it work totally fine (although not how it was intended in the strictest sense).

There's something so satisfying about watching bearings pressed in with the right tools ;)

Great video..shared with the Yeti community

thanks for another video sir. it helps a lot for us begginers

Started using clear silicone calk around all new bearing joints. Made a huge difference. No issues all season.

Super helpful and informative video. I have been vacillating whether to tackle this job myself as any DIY servicing of the bearings will invalidate Yeti's lifetime warranty.

Thank you! This is excellent.

This was such a critical video for my first attempt at replacing bearings- thank you!! For only marginally more cost than I’d pay to have my LBS do the work, I was able to buy both the bearing kit and all the RRP, Wheels Mfg, and Yeti tools. Such great peace of mind to have these tools and skills to do this quickly and easily in the future 🤘🏼

Best information bro

Awesome video, appreciate it. So far my bearing replacement has gone well. I pieced together parts from two different bearing kits. I also have the yeti tool. I'm installing the second frame bearing with yeti's tool and I cannot for the life of me get the damn thing to go in straight. kind of scary

Great video! Can you tell me which RRP kits are needed for this job?

Awesome video. Great tool kit. I went on site for RRP Press, it mentioned something about adaptors sold separately. I just wanted to make sure that $70 kit has all I need for the Yeti SB130. Thanks again for a great video.

Using your video as reference material, I am about to undertake a first bearing service on my SB165. Presently I am assembling the required tools. As such, I would be keen to understand the brand & tool name for the 8mm & 15mm extractor tool that you use on the switch infinity bearing. keep up the good video

Any videos removing the rear shock for a yeti sb130?

Is it necessary Yeti extractor kit for the main pivot bearing or i can use RRP kit 11 instead?

Great video! Exactly what I needed for the SI link. Thanks sharing and for the links to the tools. Would you have any info on which RRP kit(s) to do the bearings on a 2016 SB5.5?

Did you buy any adapters with the RRP press or just the main kit?

where do I buy that rrp bearing press kit? I have an sb150 and need to replace the bearings. Thanks!

If I have the yeti bearing extractor tool, do I need the Wheels mfg extractors as well?

do you have a list of bearing sizes for your bike? i have an sb165 which prob uses the same adapters

Since the press has no thrust washers, does the drift spin when tightening to press?

Hi I have a sb100 yeti 2019 did you know the size for all berries what size I need to buy to remove all thanks God bless you can you help me

Would love to see an updated video with an SB160

Hi do you have at video how to remove the botton bracket from my yeti sb100 I want to check the bering thanks God bless you. I'm from San Diego California

I'm confused how many kits are used here...I have an sb165 and bought the Yeti extractor but what are all the neccessary kits and tools required to removed the rest of the bearings and push them back in.. Do I need kit 2 and kit 11?

Do you know how to remove the cap that covers the balls themselves on the switch infinity?

Bit late to the party. Great video. Do you happen to have the kit number for the RRP press and extraction bits please? Not sure what size I need to get. Thanks

What cup kit do I need for the rrp press?Everything is sold separately. Is there a particular size bearing extractor I need? Thanks in advance

wish i had this video a month ago, because i tried to replace the bearing the shock linkage on my sb130, i end up bending the thing. i had to get a new one. this is a really helpful video, thanks for making it as i will probably try this again in the future also is it kit no 2 for the shock extender?

Great video thanks for sharing, what RRP kit # are you using? im thinking of taking this on with my SB150.

Hey - thanks for the great vid. Any idea which kit for SB165 and SB5 ? Thanks!

Hi! Quick question for you: the 8 mm Wheels Manufacturing extractor is for a different type of bearing with a larger OD. Is this ok? No problem to extract those small 8 mm? Thanks in advance

Please let us know the rrp kits type number you used for this. Thanks

Where can I get that yeti bearing press tool?

For extraction purposes on the linkage, does the Yeti extractor do the same thing as the red pieces from kit #11? Also, for the shock extenders, are you using kit #2? I'm currently using the hammer out method and I don't like it. Thanks!

Where can I buy the tools

Excellent video, thank you. One question: what's the bearing number for the Switch Infinity? I know the link and seatstays use 6902.

goood new friendd i support you..

I wish I had more patience for that maintenance and I don’t trust my local Yeti dealer to do it, so I sold my SB4.5 before I needed to have it done. Great video tho. 👍

Great video! Which kit would I need to get from RRP? I've already got the yeti tool. I have an sb140 for reference.

Did the Yeti bearing kit include the SI bearings? The Yeti site isn't clear. Thanks for the video!

Also, I assume it doesn't do the BB bearings? Do you have a good idea for those on the Yeti? Thanks! Have the SB115 too.

Just a heads up. I priced up the bearings individually and they come out much more expensive, so the best option is to buy the kit from Yeti.

Hard rider tip: At the FIRST instance you hear noises, have a look. Especially now, bearings and kits are weeks if not months away. Intact bearings can be cleaned and repacked until new bearings arrive. I know... Now

So I ordered the RRP kit thinking that's all I need but they are asking what adaptor kit I need. There are several numbers. Do you know what kit number I need for the SB130? Thanks!!!

Fantastic vid. Loved it but also underlined why I'll never buy a Yeti. Ease of maintianence is obviously not a primary design principal with the number of unecessaey proprietary tools, all mismatched bearing sizes and duplicated methods of extraction required. RAAW bikes on the other hand are the opposite.

Hi where can I buy tha black extractor bering

Vin Diesel what happened to your voice!?