Become a MASTER LASER ENGRAVER with my Universal Test Card!
Рет қаралды 45,453
Жыл бұрын➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero
@steveparry7364 6 ай бұрын
A wise man learns from his mistakes, a wiser man learns from someone else's! I pounded that into my kids heads as they grew up... And that saying is especially applicable to this laser! You can save yourself countless hours of "hit and miss" effort by using these test patterns! It's the FIRST thing you should learn to do! Every machine is different, every material is different. And you'll be doomed to "hit and miss" until you master these test files!
@TheLouisianaHobbyGuy 6 ай бұрын
Awesome! 👍 Thanks for watching!
@dereksummers8598 Жыл бұрын
Love your videos Rich, so full of hidden tips. I can’t wait to get home and finish this one. Thanks
@TheLouisianaHobbyGuy Жыл бұрын
Glad you like them Derek! Thank you!
@rezo1982 Жыл бұрын
So glad I found this, I been struggling. Thank you for your time in doing this. I can't wait to get this started.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Robert!
@MarklTucson Жыл бұрын
Really appreciate these videos, they are super helpful as I step into learning this new tool in my arsenal
@TheLouisianaHobbyGuy Жыл бұрын
Glad you like them Mark, thanks!
@peggycasey2265 Жыл бұрын
Thanks Rich, love your videos. Always learning something new from you.
@TheLouisianaHobbyGuy Жыл бұрын
Glad to hear it Peggy! Thank you!
@chiliman321 Жыл бұрын
My friend, Thank you thank you ! I forced myself to spend the time to do this. I messed up quite abit till the light bulb went off. Bingo!! I did the Engraving test 3 times and got it right where i need to be. I feel empowered! Thank you my friend!
@TheLouisianaHobbyGuy Жыл бұрын
Awesome! 👍 Thanks for watching!
@Embracetherandom Жыл бұрын
Another awesome tutorial! Thank you so much for sharing!
@TheLouisianaHobbyGuy Жыл бұрын
Thanks for watching Debra!
@terrydriskel9731 Жыл бұрын
Another great video Rich. Explains things perfectly
@TheLouisianaHobbyGuy Жыл бұрын
Glad you enjoyed it Terry! 👍
@jmdd03 Жыл бұрын
Fantastic video Rich, tanks again for your time to make this video.
@TheLouisianaHobbyGuy Жыл бұрын
My pleasure Juan! Thank you!
@badbadbob1 Жыл бұрын
You helped my so much with your explanation on test patterns to find your settings. Thank you.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Bob!
@davidelder5399 Жыл бұрын
Another great video Rich. Very well explained and easy to follow. I'm now a step closer to pulling the plug on a thunder laser
@TheLouisianaHobbyGuy Жыл бұрын
Awesome David! Thunder is quality!
@wck2318 Жыл бұрын
Yet again Rich, your an amazing tutor that always has time for us, and in such detail. Thanks Rich
@TheLouisianaHobbyGuy Жыл бұрын
Thanks again!
@geraldlamothe6091 Жыл бұрын
Thank you Rich...Like always....You are my go to guy. I admire your patience. Cheers!!!
@TheLouisianaHobbyGuy Жыл бұрын
I appreciate that Gerald!
@glasgowjohn7831 Жыл бұрын
Brilliant ive been watching a few of your videos in preparation of me getting my sculpfun S9 (should arrive next week on my birthday) :D and ive been mucking about with inkscape but finding this video is a godsend
@TheLouisianaHobbyGuy Жыл бұрын
Glad I could help John!
@simonwiltshire8941 Жыл бұрын
Just found the files thank you,this definitely has helped alot people and I know I'm very grateful 🙏.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it helped Simon!
@williammckee4369 Жыл бұрын
great work. I learn something new every time I watch your youtube.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome William! Thanks for watching!
@channettecoetzee8827 Жыл бұрын
Thank you Rich. I am new at this and learning alot from your channel, forum and facebook page.
@TheLouisianaHobbyGuy Жыл бұрын
Great to hear Channette!
@richardruark6422 Жыл бұрын
Thank you for the time and care you take in making your videos Rich.... I don't care that you make a long video, I appreciate that you take your time and explain step by step, thoroughly, each process and how to get the most out of your files. Thank You.. I'm just starting out so your help is greatly appreciated.
@TheLouisianaHobbyGuy Жыл бұрын
I appreciate that Richard! I make these for people just like you!
@thomasverga469 Жыл бұрын
Thank you so much. I just pulled the trigger and ordered my X Tool today. Your description of how and why to run test pieces is spot on.
@TheLouisianaHobbyGuy Жыл бұрын
Thanks Thomas! Have fun!
@raysalter6456 Жыл бұрын
Thank you Rich, test, test, test on all materials 😊😊😊
@TheLouisianaHobbyGuy Жыл бұрын
Yes, yes. yes! 👍
@Ged_Kellett Жыл бұрын
Hi Rich, Thank you very much for your very well presented videos, very informative and delivered in a relaxed, confident and inspiring manner. I have ordered my laser which is due for deliver in a few weeks time. Can't wait to carryout the various tests to set up my laser. Kep up the brilliant work
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Ged!
@Jay-em4iq Жыл бұрын
Thanks again for your amazing teaching skills!!
@TheLouisianaHobbyGuy Жыл бұрын
My pleasure Jay!
@williamgreathouse3953 Жыл бұрын
Thank you for the info. I’m just starting with diode laser engraving, and I appreciate your style. Just like sitting down and talking. Perfect. Enjoy! Bill
@TheLouisianaHobbyGuy Жыл бұрын
Glad to help William!
@Utoobasaurus Жыл бұрын
Hey Hobby Guy! Thanks so much for this video, it's come at the right time for us and our new laser machines! Just to let you know that we appreciate you very much! And for relaxation, information and enjoyment, we simply love watching different materials get lasered and what happens to them, so feel free to make lots of videos of just simple straight engravings or cuttings. Informative, yet relaxing lasering videos can be very inspiring and we often search for them so we can play them in the background while we do our work! If you make them, we will come! 🙂
@TheLouisianaHobbyGuy Жыл бұрын
Hmm, thanks for the suggestion!
@tomefabio0911 5 ай бұрын
Hey Rich! I’m very impressed with you how you explain for us, very clear and very helpful. I bought my diode 10W couple weeks ago and I had no idea how start until I subscribed your channel, after that “The Louisiana Hobby Guy” became my addiction every night after dinner. All my accessories I’ll order from your Amazon store. Thank you Sir for your dedication to helping us. I appreciate you buddy, you’re the best. 👏👏👏
@TheLouisianaHobbyGuy 5 ай бұрын
Wow! Thank you so much! I appreciate that! 👍
@marcozavarella9352 Жыл бұрын
Great crystal clear lessons! Thanks!
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful!
@patpliley5535 10 ай бұрын
Your advice is still great even after a year or more. Thanks for helping a new old man to get this laser to start to do what it should. Thanks you I hope that I can keep your out look and attitude for using the laser.
@TheLouisianaHobbyGuy 10 ай бұрын
No problem!
@rightpassage Жыл бұрын
You're the best Lightburn brain! I just became a member now that I have my D1 Pro business kit! Burned my grid, & ready to burn some test! I will soon watch your academy mix & be certified!! Thanks for taking the time to help us, newbies, in our endeavors. 😁
@TheLouisianaHobbyGuy Жыл бұрын
Welcome aboard!
@harrysample894 Жыл бұрын
I am beginning to understand how to use my S9 thanks to your thorough tutoring. I will create some test cards with the wood that I have on hand. Thank you.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Harry!
@darrellbrantley4983 Жыл бұрын
Thank you soo much for all of your videos. I just received my fist laser engraver comgrow Z1 5W and had absolutely 0 knowledge of what I was doing. I have learned an amazing amount from your videos and just joined your forum. Again thank you so much!!
@TheLouisianaHobbyGuy Жыл бұрын
Glad you like them Darrell!
@nipajhaveri434 7 ай бұрын
This is so what I needed. Thank you Rich.
@TheLouisianaHobbyGuy 7 ай бұрын
Glad it was helpful!
@nctplarry Жыл бұрын
WOW!!! As a relative newbie (had my xTool D1 only a couple of weeks and have made only a few burns worth keeping), I am totally blown away with how much valuable information you have not only collected and organized, Rich, but also how much you SHARE. I'm like a puppy dog at the feed bowl! Many thanks, sir!
@TheLouisianaHobbyGuy Жыл бұрын
Great to hear it Larry! Thank you for watching!
@MikeNHOC Жыл бұрын
Lots of great information! Thanks for sharing!
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Mike!
@dereksummers8598 Жыл бұрын
Wow. Best tip this video? Start job from here. Thanks Rich
@TheLouisianaHobbyGuy Жыл бұрын
Glad it was helpful Derek!
@slhasebroock Жыл бұрын
Another excellent video! Your content is excellent and your forum super as well. Signing up to become a Patron.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome Steve, I saw that, thank you! 👍
@zsot 9 ай бұрын
Thanks a lot! Your work is extremely helpful.
@TheLouisianaHobbyGuy 9 ай бұрын
Glad to hear that!
@georgeknight1645 Жыл бұрын
Another great video Rich thank you 👍
@TheLouisianaHobbyGuy Жыл бұрын
Glad you enjoyed it George!
@michaelmcdonough1989 Жыл бұрын
Another super video Rich. I look forward to your next one whatever it is. Thanks. BTW I am a woodworker from WAY back and I see a lot of posts on FB about finding the center on an item such as wood and making a cross where it is, my little tip to those individuals is, to remove the pencil mark take a little bit of acetone on a paper towel or rag and just wipe it off. Works like a champ. Mike
@TheLouisianaHobbyGuy Жыл бұрын
That is awesome Michael! Thanks for the tip!
@fredfloyd6957 Жыл бұрын
I struggled with making my own test cards, mostly without success. Finding your test card library will go a long way to learning how to control the laser to its optimum performance. My laser is a JTech Photonics 14W Dual Pro. I think this is what you would call a 10 watt laser, so that will be a jumping off point for my testing journey. Your library of videos is helping me to go from ground zero with laser to "no longer a noob". Thank you!!!!!
@TheLouisianaHobbyGuy Жыл бұрын
Awesome Fred! Great to hear!
@d.i.l.l.i.g.a.f Жыл бұрын
Always wanted to know how to set up my snapmaker, looking forward to this
@TheLouisianaHobbyGuy Жыл бұрын
Thanks for watching!
@steveparry7364 6 ай бұрын
I've had my laser about a week, and I've been working on images, mainly on a piece of material I bought from Lowe's. I've gotten pretty decent at making them come out good through trial and error... But the gray-scale test card is a MUST HAVE! It would save you hours and material, trust me, I know. LOL Thanks
@TheLouisianaHobbyGuy 6 ай бұрын
Glad to hear it's working for you Steve!
@jonsaircond8520 Жыл бұрын
Good timing I almost have my new Monport 80W ready. I have for the first time in my life waited to completely set it up before running it. I have done the Infinity exhaust and installed a air solenoid with compressor. The chiller arrived yesterday so finally this weekend I will get to fire the laser for the first time. So far I've been very impressed with Monport. My machine came in perfect condition and after going over everything only thing I found was the door switch was a little loose, from shipping I'm sure. Hopefully the laser part is as good as the machine has been
@TheLouisianaHobbyGuy Жыл бұрын
I love mine! Congrats on the new laser!
@larrystaas1940 Жыл бұрын
Great video as always. Food for thought, all new comers to lasers have no clue where to start with feed and speeds and that is the reason for them asking. I am new and have a Yorahome 40 watt and cannot find out what the capabilities of the laser is and where to start setting things. Granted I have picked up quite a bit from watching your videos but it took way too long for me to find your site. Keep up the good work.
@TheLouisianaHobbyGuy Жыл бұрын
Thank you Larry!
@janesfavsvideos Жыл бұрын
I believe watching you I might come close to being a master complete newbie with a Xtool M1, so detailed in your videos, always straight to the point, and not a lot of extra stuff. Watching you gives me a little more confidence each video, THANKS
@TheLouisianaHobbyGuy Жыл бұрын
I don't think the M1 is compatible with Lightburn Jane, or perhaps you meant the D1.
@janesfavsvideos Жыл бұрын
@@TheLouisianaHobbyGuy unfortunately the M1 is not compatible but I still love learning from your videos. Because it gives me a starting point like you said.
@PhilippinesDarrellCheeks Жыл бұрын
Thanks Rich !
@TheLouisianaHobbyGuy Жыл бұрын
You bet!
@merrillalbury8214 Жыл бұрын
Thanks for the review.
@TheLouisianaHobbyGuy Жыл бұрын
My pleasure Merrill!
@scorpianspirit5124 11 ай бұрын
As a new user, this is extremely helpful. In my case I'm using a CNC machine with a mounted laser it's limited to 2000mm speed, but you have answered my question about where to start. There is no universal settings as it's a case by case because of all the variables, so these tests will allow me to test and experiment what my setup is capable of. I have to admit, it was all a little intimidating getting started with using the laser, but almost daily now I have the moments where I learn and accomplish the skills needed to use the machine. There is a lot of satisfaction in those moments ! Really well done video Rich, You gave me one of those" light bulb comes on" moments ! LOL...I'm 61..(old dog).. and pleased to know I can still learn new tricks... ;-) Cheers my friend...
@TheLouisianaHobbyGuy 11 ай бұрын
Glad it was helpful!
@MrRdjhebs Жыл бұрын
Another great video
@TheLouisianaHobbyGuy Жыл бұрын
Thanks again Robert!
@kteilers1 Жыл бұрын
I had struggled figuring out how to tailor this to my XTool D1, 10 W but this was exactly what I needed to see. Running a grayscale test on a 4" ceramic tile now. I couldn't quite size it up to 155mm as the instructions showed. I downloaded the cut library and even though your UTC said it was built with a 5W speed/power, the library actually showed an even slower speed, not faster. I split the difference, so fingers crossed. Wondering if at 5% you will even get any shading on tile since it's such a hard surface. Thank you!
@TheLouisianaHobbyGuy Жыл бұрын
The D1 10W isn't known for low power Tim. In fact, I couldn't get anything worth using until around 14%. So for the one I have, 14-100% is the operating range. Yours may be different.
@henriquesantana9609 Жыл бұрын
WHAT ARE YOUR SETTINGS??? LOL Every single time, no mater what laser or job or place that is the first comment! hahhaah I try to explain to folks the same thing you are saying about the diferences of machines, climate, supply, EXPERIENCE, power, feed, and not to mention is your beer cold enough because that will effect your laser burns as well! lol Thank you for sharing and educating us!
@TheLouisianaHobbyGuy Жыл бұрын
🤪 Thanks for watching Henrique!
@ammar2developIT 2 ай бұрын
great man
@TheLouisianaHobbyGuy 2 ай бұрын
Thanks for watching!
@mfitzi69 Жыл бұрын
Hey man thank you so much! I had a CNC machine and stuggled for a year getting speeds and feeds down and lost interest. Your approach is great by getting us to input our values. I wish I had something like this then (I'd still have it)! Again, thank you!!
@TheLouisianaHobbyGuy Жыл бұрын
Glad I could help!
@kevinstrickland6314 Жыл бұрын
Awesome vid and great explanation! Itd be cool to see a rotary video with setup on lightburn...mm per rotation etc.
@TheLouisianaHobbyGuy Жыл бұрын
I have two of them on the channel Kevin.
@kevinstrickland6314 Жыл бұрын
@@TheLouisianaHobbyGuy awesome thanks I'm going to look at them 🤙🤙 the atomstack r2 pro came with no info pertaining to this roller with lighburn. All it says is to change the settings in the actual Y axis of the machine which doesn't seem right. Using Atomstack S20 Pro w/ R3 Roller Pro
@ortholoc Жыл бұрын
This is very informative. However, since I'm a complete beginner, it was rather overwhelming. Having said that, almost every laser engraving video influencer has always referred to your videos. I have now subscribed, and looking forward to your other videos for beginners. I know nothing of the lightburn program, but plan on learning with the beginners program included with the XTool D! 10W laser(laserbox), I will be getting next week. Any tips for a newbie? You're very articulate with your explanations on your videos. So again, looking forward to watching more. Thank you for sharing your knowledge.
@TheLouisianaHobbyGuy Жыл бұрын
I have a playlist called Lightburn College Larry. Start with Lightburn 101.
@andrecanis4894 Жыл бұрын
Thank you Rich, I'm still new to the laser so your videos have been a godsend for learning. About doing a grayscale test on slate - I've been dithering my images for slate engraving, because I had read that slate was a "black and white only" material. So can I really do grayscale on slate instead?
@TheLouisianaHobbyGuy Жыл бұрын
Yes you can Andre! You have to run several tests to dial it in, but I do pet cemetery headstones with photos on the Co2. The diode, not so much.
@ZuoKalp 2 ай бұрын
"Make an account on my forum to get the file" Sneaky tactic, you got me
@TheLouisianaHobbyGuy 2 ай бұрын
Good thing it's free!
@hiramcinar2975 Жыл бұрын
You re awsome man, thanks for the info, The Almighty God bless you.
@TheLouisianaHobbyGuy Жыл бұрын
Thank you so much Hiram! I really appreciate it! 👍
@farshadbagheri Жыл бұрын
Hello and thank you so much for making this file available to members. What would your recommendations be for adjusting the values for a 150W Coherent laser? Thanks again.
@TheLouisianaHobbyGuy Жыл бұрын
I would have to run a few test files and see. The tests determine the settings Farshad.
@farshadbagheri Жыл бұрын
@@TheLouisianaHobbyGuy Thank you. I will start with what I estimate to be a good range and hone in from there. Thank you for all the content you share. I have learned a lot and really appreciate it.
@mrzakkral Жыл бұрын
Thank you for the video. I love running tests but had a question. Is there a specific size of image that has to be used? Specifically gray scale test. You mention that the rotary grayscale had to be 155mm. For me that is a lot of product to use, how much is loss if you change that to like a 50-78mm rotary?
@TheLouisianaHobbyGuy Жыл бұрын
You can, but it reduces the accuracy Zak. The color wheel be fine.
@LouiseHolmanClarke Ай бұрын
I love all your knowledge the only thing is I am trying to get best engrave results on rubber.....do you have any video's on this material?
@TheLouisianaHobbyGuy Ай бұрын
I did this one on making a rubber stamp Louise: kzfaq.info/get/bejne/oLN4ZLSpxJzbmX0.html
@LouiseHolmanClarke Ай бұрын
@@TheLouisianaHobbyGuy thankyou I will take a look 👀
@gregoryalexander6864 Жыл бұрын
Been wanting to start my own side hustle doing this, but not sure to go diode or C02. Other concern is the environment in my home town! Humidity, Heat, etc…
@TheLouisianaHobbyGuy Жыл бұрын
Lots of variables involved when choosing a laser Gregory.
@charleshouseknecht6970 Жыл бұрын
Thank you for all your work making videos. I learn more from your videos, compared to the manufacture's videos.
@TheLouisianaHobbyGuy Жыл бұрын
Great to hear Charles, Thank you!
@2ksolar 4 ай бұрын
Interesting and informative as usual. Quick question: don't most of the hobby type 5W or 10W lasers have a speed limitation of 100mm/s? I have the AtomStack A10 Pro and that seems to be the case. So why, would we ever create a layer with speeds like 8000mm/s? Just curious.
@TheLouisianaHobbyGuy 4 ай бұрын
Most of the older generation lasers have a restriction of 6000 mm/min. However newer ones from 2023 forward have differing speeds up to 48000 mm/min.
@rustyp21 Жыл бұрын
Rich, on your 80w Monport, did you find it necessary to upgrade the air assist? I see a lot of people doing that but wasn’t sure if it is needed with this particular laser. Thanks again for ALL of your help and replies. I’m going to go do a ramp test now - my first use of this new beast.
@TheLouisianaHobbyGuy Жыл бұрын
No I haven't. In fact, I didn't even hook up my compressor to it. It's doing fine with the included air assist David.
@alg4633 Жыл бұрын
Hi Rich, excellent videos, you are so helpful. I have a question...My laser also is Z axis adjustable for Focus for different materials. I notice you never adjust your Z axis in your videos. This also impacts the cut and engrave settings. For my Gweike Cloud Pro 50w, they recommend a Z axis focus of 14mm for 3mm Basswood. Do your burn charts factor in laser focus?
@TheLouisianaHobbyGuy Жыл бұрын
No, I use the UTC as a baseline without focal adjustment. When I do an actual job, I adjust the focus down 1/2 the thickness of the material to cut.
@Jay.C.H 5 ай бұрын
I just ordered my MKW30. You have so many videos, and the show up on KZfaq is mixed date order. Just a thought, and it might not be something you would want to do, but it would be a great thing to have a list of videos that are in a class type of file that lists in order a “just got my laser to a I should know what to do.” I hope that made sense. I need to add a device, leaven Lightburn, and etc. I would even pay for something like this, I imagine other new owners wood as well. Just a thought. I am excited to set started, and I am headed to the forum. Thanks for spreading all you knowledge to all.
@TheLouisianaHobbyGuy 5 ай бұрын
KZfaq doesn't allow you to reorganize or edit videos. There are playlists though.
@Jay.C.H 5 ай бұрын
I am subscribed and see the playlist. Why I was asking for a list in chronological, order or something like that is KZfaq in their infinite wisdom doesn’t have a sort option.
@TheLouisianaHobbyGuy 5 ай бұрын
No they don't have that option for me to reorder them, and any reasonable person would say, *WHAT! WHY??*
@andreapancini9652 Жыл бұрын
Hi Rich, special thanks for your hard work. Always appreciated! I would like to ask you if there was an error in the file. **IMPORTANT** CHECK YOUR CUTS AND LAYERS PRIORITY! The Cuts / Layers tab should be in THIS order from top to bottom: Text - Layer 00 - 2000mm/min 75% Power InnerLine - Layer 01 - 2000mm/min 75% Power Grayscale Image - Layer 00 - 3000mm/min 100% Power Raster1 - Layer 05 - 2000mm/min 100% Power Raster2 - Layer 06 - 2500mm/min 100% Power Raster3 - Layer 07 - 3000mm/min 100% Power Raster4 - Layer 08 - 3500mm/min 100% Power Raster5 - Layer 09 - 4000mm/min 100% Power Raster6 - Layer 10 - 4500mm/min 100% Power Atkinson - Layer 01 - 3500mm/min 100% Power Newsprint - Layer 02 - 3500mm/min 100% Power Dither - Layer 03 - 3500mm/min 100% Power Jarvis - Layer 04 - 3500mm/min 100% Power Line Cut - Layer 13 - 200mm/min 100% Power InnerCut - Layer 03 - 200mm/min 100% Power --------> FlexCut - Layer 04 - 200 mm/min 100% Power
@TheLouisianaHobbyGuy Жыл бұрын
Not that I know of. It has been downloaded and used thousands of times.
@RubenWoodcraft Жыл бұрын
awesome resaurce, thanks for sharing. I only have 4 mm plywood at the moment, would you start by doubling the passes or going down to half the speed as a starting point?
@TheLouisianaHobbyGuy Жыл бұрын
For cutting, I would start with a cut test in Lightburn. Laser Tools --> Material Test
@RubenWoodcraft Жыл бұрын
@@TheLouisianaHobbyGuy makes sense. Then I' ll have a baseline to refine with the test card. Much appreciated!
@paulantonucci6933 Жыл бұрын
outstanding you are the best
@TheLouisianaHobbyGuy Жыл бұрын
Thank you so much Paul 😀
@paulantonucci6933 Жыл бұрын
Hey i can't get on ur site
@rustyp21 Жыл бұрын
Great video Rich. But! I haven’t used my Monport 80w yet and just loaded the library you sent me. In there, there is no Basswood (which I want to burn this on). I created one, then created an Engrave under (no thickness). When I get to the “Images” I cannot change the min power as they are greyed out. Any suggestions? Also, you skipped Line Cut and went to Inner cut - are they the same settings? Thanks again for all you do!
@TheLouisianaHobbyGuy Жыл бұрын
Minimum power is only available for grayscale images and vector cornering David.
@damonharvey8792 Жыл бұрын
first of all. Thank You So Much for these videos. I have learned so much. I have one question about the grayscale that I didnt catch the answer to. Does it matter the size that you run the gray scale in accordance to photos? do I have to run a grayscale test the same size as the photo I am engraving? before I watched your videos, I saw someone saying that the size of the photo engraving determines the speed/power. Thank You.
@TheLouisianaHobbyGuy Жыл бұрын
Not necessarily Damon. If you do a color wheel test at 150mm, that will give the settings for any size. Of course, really small images need to be done slower.
@damonharvey8792 Жыл бұрын
@@TheLouisianaHobbyGuy thank you
@charlesanderson3801 Жыл бұрын
Hello, thank you for the great instructional video. BTW I have the latest version of Lightburn, 1.2.01, and I have 3 questions: 1st, When opening the latest version of UTC, the images are inverted horizontally. I saw the comment below and restarted everything and with or without the tool connected, the image is still backward and upside down when I open the file. Second, since I am so new at this should I maybe study the Lightburn 101 or other prerequisite prior to attempting to use the UTC? I'll worry about the 3rd question later, it's not a big deal. Thanks so much for your time and any advice. Charles
@TheLouisianaHobbyGuy Жыл бұрын
The UTC was designed on a diode laser with an origin of the front left. Your origin may be the back left. All you have to do is Ctrl + A to select all, and then use the mirror icon on the top toolbar to correct it. Yes, if you haven't seen the Lightburn college playlist, I would highly recommend starting there.
@woldschnaggl Жыл бұрын
hi rich. i really like your kontent! i ordered a atezr p20 plus and i would like to know if it is a good choice to run the laser always at 100% power like you did. because i think i have read somewhere that 100% is not good for the lense. its better to max the power to 95%.. what u think?
@TheLouisianaHobbyGuy Жыл бұрын
95 or 100 doesn't make any difference. If you want to conserve the life, stick to 70 or so, but it's not like a Co2, I run all my lasers at 100% when I need to.
@custompc5232 Жыл бұрын
Hi Rich, having issues with Neje E40, so going to start from scratch to resolve. Are you able to put up your E40 Materials Library onto your forum as it would help greatly with diagnosing. I say hardware, support says settings so be both cant be right.
@TheLouisianaHobbyGuy Жыл бұрын
The E40 is an 11W laser, so any 10W output library should work fine from my forum.
@Ryan82288 Жыл бұрын
Is there a certain metal grate you use for cutting through wood. Or a raised grate that works good.
@TheLouisianaHobbyGuy Жыл бұрын
I've used an old radiator, an oven broiler rack and a honeycomb bed. It really doesn't matter Ryan.
@garystovall4225 Жыл бұрын
Do you have a video showing how to set up and use auto focus, I am using lightburn with the Two Trees ts2 in Windows 11.
@TheLouisianaHobbyGuy Жыл бұрын
I don't have the TS2.
@garystovall4225 Жыл бұрын
That,KS for the reply, I figured it out, I have been enjoying ur light burn videos, it was an issue in light burn, sounds like u know lughtburn well, so have it a shot.
@mp6814 Жыл бұрын
Great tutorial, thanks a lot, Rich! Quick remark - I know some folks, including me, do no like to push their machines (LED or CO2) anywhere near 100% rated output power. I personally like to stay at or below 80% o it, understandably an arbitrary number, but one that I believe extends the lifespan o the the laser itself (diode or glass tube). This idea is corroborated by charts issued by laser makers. So, how about setting the power to 5% to 100% for the tests, but limiting the output ratio to 80%, therefore making e.g., your 80W Monport CO2 laser a 64W machine, still a powerful device AND extending the longevity of it? Same is true or diode lasers as well. You may have talked about this, if so, please ignore... Thanks!
@TheLouisianaHobbyGuy Жыл бұрын
It's actually not true. Co2 lasers are far different than diode lasers. The Co2 is/can be a hyper-consumable if not used properly, and my controllers are set in mAs, not specific power percentages. So my 80W for example, is set to 21mA power on the controller, which is 70% of actual power. Lightburn will send 100% to the machine and the controller throttles that to 21mA. The diode is completely different. If you research the life of the diodes used in lasers, you'll see the power loss curve @ 90% (which is how they're tested) power drop off about 5-7% for every1000 hours. Running a diode at 100% isn't going to make much difference in the longevity. This information has been propagated all over the Internet and people have taken Co2 rules and applied them to diodes without any research or statistics. I call it the, "Facebook Fallacy." If you really want to extend the life of your diode, *time is the issue*, not power! Try to run it no more than 30 minutes at a time. You can pause and resume jobs in Lightburn.
@mp6814 Жыл бұрын
@@TheLouisianaHobbyGuy Strong answer, but perhaps we are both correct. Little doubt about CO2 tubes, there's a consensus on this one. The main problem for LED lasers is heat. Driving them at 100% for longer periods of time (i.e., not an occasional event) without breaks brings on the risk of exceeding safe operating temperature zone for the diode. So, we can talk about the detrimental effect of increased temperature (say, going above 30C or thereabouts?) as a direct problem, or driving them at maximum as a proxy for increased temperature. Agreed?
@UncleRons_3D_Pub Жыл бұрын
Just curious, before I burn one, dors ticking on the 'constant power' option in the layer setting negate the adjusted power setting from the shape properties tab? and, would you even want to use constant power on a gray scale image? Or does constant power not do what I am thinking that it does, which is to lock the laser in to a specific output power
@TheLouisianaHobbyGuy Жыл бұрын
No, I don't use constant power except to cut, and it does negate the power down for cornering, so you can get some burnt corners. Images should never have constant power.
@jdo62 Жыл бұрын
Rich, your latest universal test card is for a 5.5w laser and then you changed it to a 10w. Are these the input of the laser module or the opticle output? I have a YoraHome 15w (6.5w output) and we just purchased the TwoTrees TTS-55.
@TheLouisianaHobbyGuy Жыл бұрын
Optical output Jim.
@trcknup Жыл бұрын
Hey Rich, Im trying to get my LM3 tuned in for Norton White tile. Im not sure if Im reading this card right. 1500/100 seems to be coming out best on the grayscale test. Seems kinda slow for a 10W laser and Im not getting anything below 35% at any speed, but Im definitely a newbie at this. Also what are the powers on the four sections on the inner circle? They are coming out nice except the first one is pure white.
@TheLouisianaHobbyGuy Жыл бұрын
You have to adjust the speeds and power to match your laser. It was designed for a 5W laser. The center is just quarters, 25 to 100.
@hectorflores6666 Жыл бұрын
Thanks for the info! Q's HOIw do you add and or use the 'Library'?? I am new at LightBurn, my library is empty
@TheLouisianaHobbyGuy Жыл бұрын
Search my channel for library. There are several videos on the subject Hector.
@hectorflores6666 Жыл бұрын
@@TheLouisianaHobbyGuy Thank you! I just ran the Grayscale test, but everything is one shade!!!!! In the image, the circle is all one figure, I could not see that each section had a different power assigned to it!
@TheLouisianaHobbyGuy Жыл бұрын
@@hectorflores6666 Your power is too high.
@hectorflores6666 Жыл бұрын
@@TheLouisianaHobbyGuy Thank you for the feedback. I don't understand!! The template for the Grayscale I have does not have different power assigned to each section! I ungrouped the image and can't select any one of the sections independently!
@joshuacrom7121 Жыл бұрын
Would I just multiply by 4 to figure up the Xtool D1 Pro 20W settings? Speed, power, or both? I've had my laser for a couple of weeks now. I'm trying to understand how to set DPI or LPI as well. It's all Greek to me.
@TheLouisianaHobbyGuy Жыл бұрын
It doesn't really work that way. Get a cut and engrave library from my forum for settings: lahobbyguy.com/bb
@halfass.model.garage Жыл бұрын
I'm new to all this and I have a question on this test caard my grayscale is locked and won't let me put in the min power any help would be appreciated. thanks in advance and I love the videos learned a lot really fast.
@TheLouisianaHobbyGuy Жыл бұрын
Double click the layer and make sure the image mode is grayscale.
@halfass.model.garage Жыл бұрын
Thanks again I found it I was running Jarvis.
@rustyp21 Жыл бұрын
@@TheLouisianaHobbyGuy I cannot change any of the min power settings for the images (Atkinson, Newsprint, etc.) for my 80w Monport. If I change from Atkinson to Greyscale I can - but do I need to change it back and then save it?
@TheLouisianaHobbyGuy Жыл бұрын
@@rustyp21 Minimum power only applies to grayscale and vector cornering.
@geraldlamothe6091 Жыл бұрын
I noticed in the library ceramic is set at 900 speed and 100 power...Is this good? On the D1 (10 watt) I do tiles at 4500 speed and 85 power and they come out great
@TheLouisianaHobbyGuy Жыл бұрын
The libraries are based on the manufacturer recommendations.
@gregoryalexander6864 Жыл бұрын
Go Saints!
@TheLouisianaHobbyGuy Жыл бұрын
Who Dat! 🏈
@patrickvanbiljon3332 Жыл бұрын
There is a bug in new release 1.2.01 When cutting and you ajust speed or power they both change Have a look and see if you agree
@TheLouisianaHobbyGuy Жыл бұрын
You have to report it to Lightburn Patrick.
@doc_ineeda_win5834 Жыл бұрын
did you do part 2 for co2 laser? k40 lol maybe? but really any
@TheLouisianaHobbyGuy Жыл бұрын
I have several Co2 videos Doc.
@billieb Жыл бұрын
wow. This is overwhelming for someone that just got their d1 10 watt. Is there just a download this and cut it kinda starting point?
@TheLouisianaHobbyGuy Жыл бұрын
Try starting here Billie: kzfaq.info/get/bejne/iM92fcx9qdCdgqc.html
@angelasgarlata Жыл бұрын
Hi! It shows your site is down...any idea when it will be up again?
@TheLouisianaHobbyGuy Жыл бұрын
Maybe next week sometime. We're working on it!
@billieb Жыл бұрын
is there a 10 w layout vs the 5 watt you show in the vid?
@TheLouisianaHobbyGuy Жыл бұрын
Not for this file Billie. You have to make the adjustments yourself. A good starting point would be doubling the speed.
@rustyp21 Жыл бұрын
Rich, are the settings for CO2 laser 500mm/min, or 500mm/sec?
@TheLouisianaHobbyGuy Жыл бұрын
This card was designed for a diode laser David, as I said in the video. All of my diode work is mm/min. If your using a Co2, you would need to know your baseline settings for engraving and cutting. 500 mm/sec would be on the upper end of my 80W capability and is pretty fast, and way faster than a K40 could go. You have to experiment with your settings.
@jasonfair5160 Жыл бұрын
This was a great explanation of the steps required to get great results! I did slate coasters the other day and I was not impressed with my results. Now I know what to do! Do you find that if you run 100% power more often that the diode laser will eventually get weaker? Thanks Rich!
@TheLouisianaHobbyGuy Жыл бұрын
No Jason, I have 3 diode lasers that were in production use for 3 years with no issues.
@jasonfair5160 Жыл бұрын
@@TheLouisianaHobbyGuy good to know!!
@sumanchowdhury5547 Жыл бұрын
Sir,how do i adjust this to 2.5 mm?I use a diode laser 5 watt.
@TheLouisianaHobbyGuy Жыл бұрын
An SD card is 2mm, that should be close enough.
@michaelmcdonough1989 Жыл бұрын
Rich, I noticed that on the cuts/layers window the Line Cut layer (13) shows 200.0 speed 100% power, and the image attached at the top right of the file shows 2000.0 speed 100% power. I know this is a minor issue but I just thought you might like to know. Also, Jarvis has different values and there is no flex cut layer as shown in the image of the cuts and layers. I hope I can burn some wood this weekend. Mike
@TheLouisianaHobbyGuy Жыл бұрын
Good catch! The image is wrong, the file is right Michael.
@PlanetrightPro Жыл бұрын
Wow your 80 watt is 19mA @ 70. Mine is 21mA @ 60. Did you recalibrate the power supply?
@TheLouisianaHobbyGuy Жыл бұрын
Yes, I adjusted the PWM on the power supply.
@lonniedupont Жыл бұрын
👍🏻👍🏻👍🏻
@TheLouisianaHobbyGuy Жыл бұрын
😎😎😎
@iwannaapple7190 Жыл бұрын
I downloaded the test cards. How did you set your laser to only burn darker lines for the Grey card test? When I did it, it discolored the wood for the ENTIRE card and then when it came to the circular part of the image, it burned that darker. I notice also that while your first attempt it wasn't acceptable but I also noticed at the bottom of the circle it pretty much did not burn (whitish area) whereas mine did the exact opposite. Instead of the laser not scoring the wood in that area, it scored the crap out of it. One weird thing it did was the 40, 45, 55, 60,65,70,75,80 was scorched with no variation whereas the 50,85,90,100,5,10,15,20 was not scorched and was light colored with little or no discernible color variation. IN other words, the 95% is the same color as the 10% with the only exception of how it feels when you rub your finger across it. The 95 had a deeper burn and feels rougher then the 10.
@TheLouisianaHobbyGuy Жыл бұрын
It all depends on the laser and the power. The power settings have to be tested and adjusted.
@iwannaapple7190 Жыл бұрын
@@TheLouisianaHobbyGuy I hope its not the laser.? Have removeable lensrs that also need focusing. Ill be testing more though. But strangely enough it burns the entire test card and left no white??
@TheLouisianaHobbyGuy Жыл бұрын
That means the power is too high or the speed is too slow or both.
@rustyp21 Жыл бұрын
I thought it wasn’t good to run your 5w at 100% power - that it decreases the life of the laser quite a bit more. Is that true?
@TheLouisianaHobbyGuy Жыл бұрын
The difference is nominal according to the manufacturers David. You'll notice most of them give you settings at 100% power.
@bigmd1343 6 ай бұрын
#LlaserKing !
@ellenoshea432 Жыл бұрын
Green
@TheLouisianaHobbyGuy Жыл бұрын
Blue?
The Louisiana Hobby Guy
Рет қаралды 63 М.
The Louisiana Hobby Guy
Рет қаралды 59 М.
The Louisiana Hobby Guy
Рет қаралды 25 М.
The Louisiana Hobby Guy
Рет қаралды 23 М.
The Louisiana Hobby Guy
Рет қаралды 23 М.
Laser Livestream - Laser projects & tutorials
Рет қаралды 13 М.
The Louisiana Hobby Guy
Рет қаралды 94 М.
The Louisiana Hobby Guy
Рет қаралды 16 М.
Bushcraft skills
Рет қаралды 32 МЛН