Beginner Tumbler Tips | How to use Water-Slide Paper

Рет қаралды 125,158

4 жыл бұрын

Quick overview of how to use water-slide paper on tumblers
Find thousands of decals on Creative Fabrica for your water-slide paper projects!
-Join Creative Fabrica for lots of great decals: www.creativefabrica.com/ref/1...
Clear Waterslide Paper: amzn.to/3cG3pO0
White Waterslide Paper: amzn.to/2MusyjR
Clear Spray Paint: amzn.to/2AHFU9G
Glitter Shop: www.SOCglitters.com
Sandy’s Organized Chaos VIP Facebook Group: groups/66793...
Royalty Free Music provided by www.bensound.com
#WaterslidePaper #WakePrepSlayAllDay

Пікірлер: 423

@meghanmcintyre8765 3 жыл бұрын

I literally paused and pulled my preteen son out of headphone land over how EXCITED I was to see my name spelled right with my FAVORITE animal in your example tumbler! 🙌 It's the little things. 🤣 Thanks for another great video! 😁💜

@ljsimon562 3 жыл бұрын

Thank you for the video! I had additional questions, but found them asked and answered in the comments. Thank you very much for sharing your knowledge and experience. 😊❤️

@kennyjohnson4411 3 жыл бұрын

Very nice video Ma'am. I'm trying to surprise my wife and do this waterside tumbler for her that she's been trying to get completed. You're a great teacher. 👍🏽

@SifuPonce 2 жыл бұрын

You have just become one of my favorite people. I am trying to get started making tumblers and your videos are so helpful, thank you.

@bettykadel 2 жыл бұрын

THANK YOU for doing this Video! Straight to it and easy instructions!!!!

@dawnalexander1219 3 жыл бұрын

Easy peasy directions! I needed this!!

@mamatosh05 3 жыл бұрын

You talk so calm; so relaxing to listen to. Your work is beautiful. I love the black tumbler. Thanks for sharing.

@SandysOrganizedChaos 3 жыл бұрын

Thank you ❤️

@MelsCornerCreations 3 жыл бұрын

This was the nicest, easiest video to follow thank you so much!

@malysabriones6094 3 жыл бұрын

Super helpful! Thank you so much. Beginner waterslider here!

@elielozano404 2 жыл бұрын

What a great video!! Thank you so much for sharing!!

@Robsquick 4 жыл бұрын

Awesome! Wish I had seen this before the first time I tried WS! Great info, thank you!

@AG-we8gg 3 жыл бұрын

Thank you for this easy to follow tutorial. I watched other videos and thought ok I can do that. Then got problems with the image cracking not tearing but cracking up. It was horrible. But, I think I can see where I went wrong now. Thanks so much!

@lynnebizlyne436 Жыл бұрын

Great tutorial! Thank you for sharing with us newbies 😊❤

@alicedolengewicz1214 3 жыл бұрын

Thank you for guiding me to this video... I love your videos, they are so easy to understand and follow ❣️

@ninagonzalez8683 4 жыл бұрын

Omg!! You read my mind! I needed this tutorial so bad. Thank you are amazing!!

@SandysOrganizedChaos 4 жыл бұрын

🤗

@kellyvaughan9322 3 жыл бұрын

Thank you for a great tutorial!

@rachelcardona7230 3 жыл бұрын

Beautiful design and great work

@starlafogarty9501 3 жыл бұрын

Thanks for the awesome tips!

@bosslady9717 2 жыл бұрын

You're very talented, Thanks you for sharing your crafts, you items are really beautiful.

@tamikka09 4 жыл бұрын

Great video tfs. I received my glitter order and so ready to create ❤❤

@hodlmama6729 2 жыл бұрын

Loved this video.

@Riathathor 3 жыл бұрын

really really nice designs!!

@deelicious1920 3 жыл бұрын

This was awesome. Thanks.

@Leavemealon369 2 жыл бұрын

Awesome video. Thanks so much.

@dianekell5460 3 жыл бұрын

Wow! Thank you!

@ydee2010 Жыл бұрын

So helpful thank u so much!!!!

@crystalrodriguez4403 4 жыл бұрын

I am so glad I found you!! You are awesome 😎 great work!!!

@SandysOrganizedChaos 4 жыл бұрын

Thank you! So glad you found me as well 🤗

@SusanWaddleton Жыл бұрын

Beautiful. Thank you for sharing.

@SandysOrganizedChaos Жыл бұрын

You are so welcome!

@brittanyarndt8512 3 жыл бұрын

Thank you! This was such an easy explanation:)

@pensychan Жыл бұрын

Than you so much for sharing your process, I had been trying to find a simple method to print on tumbler for details and stuff and all i could come up with was too complicated, I'm for sure doing this next time!

@antonietta2874 7 ай бұрын

Thank you for sharing.

@stirer1 3 жыл бұрын

Thanks again for a great video

@vernellthomas1744 2 жыл бұрын

thanks for the video very easy to follow

@breathrelax7716 3 жыл бұрын

you made it look super easy!!

@SandysOrganizedChaos 3 жыл бұрын

It wasn’t easy when I first started 😅 but it gets easier the more you do. ❤️

@ingridhernandez5625 3 жыл бұрын

Beautiful

@pink.ivy87 2 жыл бұрын

Great tutorial. You made it look so easy...

@SandysOrganizedChaos 2 жыл бұрын

It was hard when I first started using them. But it gets easier the more you make 💖

@BoojeeUniversity 3 жыл бұрын

Im learning soo much from your videos 😁 thank you for posting 💕

@SandysOrganizedChaos 3 жыл бұрын

So happy to hear this ❤️❤️ thank you for watching 🤗

@sherylldupuis6323 2 жыл бұрын

Thank you. Thank you Sandy. Just did my first waterslide today. Yeah. Ready to epoxy. Luv yr channel. Hugs. ❤️🇨🇦

@SandysOrganizedChaos 2 жыл бұрын

🥳✨ that is so awesome! 🤗💜💜

@xMESx-og1fn 2 жыл бұрын

Is it just regular ink in the printer or sublimination ink?

@vickyewilliams5764 2 жыл бұрын

Thanks so much! ❤️

@suzettegarcia8519 3 жыл бұрын

Love your videos, you really are very creative!

@SandysOrganizedChaos 3 жыл бұрын

Thank you ☺️

@zoilarangel6328 3 жыл бұрын

Beautiful thanks for this tutorial

@SandysOrganizedChaos 3 жыл бұрын

You are very welcome!

@christini2828 3 жыл бұрын

Love the turtles so beautiful

@minicaestilette3010 2 жыл бұрын

Wow!!! That seems so easy to make waterslide decals They Beautiful I'm trying to find that perfect printer for making them Ty so much

@lolitascreations 3 жыл бұрын

Thank you for sharing 🌸💕🌸

@SandysOrganizedChaos 3 жыл бұрын

You’re very welcome!

@kaybryant7987 3 жыл бұрын

I enjoyed your video

@BGLFCreative. 3 жыл бұрын

This is very nice

@RickCheadle 3 жыл бұрын

awesome video!

@SandysOrganizedChaos 3 жыл бұрын

Thank you, Rick!

@Lonepineacres 3 жыл бұрын

Where do you get your designs to print? Specifically that beautiful sunflower 😍

@Jeffreysaunt 3 жыл бұрын

New lady here. Thank you !

@jruth5005 3 жыл бұрын

You made this look extremely doable

@jonellejacobs2934 4 жыл бұрын

Thanks for another great tutorial! I was wondering what was the difference between the white and clear. I definitely want to try the white now.

@SandysOrganizedChaos 4 жыл бұрын

🤗

@jackelinharo4755 2 жыл бұрын

Subscribing 😍.

@luckylaken4364 3 жыл бұрын

Thank you for the very helpful video! My only question is, do you have to spray paint it or could you just lay the decal down and then expoy it to seal it in?

@michellecabral3739 3 жыл бұрын

Hi. Thank you for this video! I have been trying to figure out how to cure the medium without putting it in the oven. I didn't know you could use epoxy. I would like to know what you use for epoxy please. I am trying to make some tumblers as gifts and just want to make sure I buy the right product. Thank you again. :)

@crb1567 3 жыл бұрын

This video was very helpful. Thank you! I’m New to this and very scared to try my first tumbler. What type of printer would you recommend to use? Thank you!

@davidwilkes9752 2 жыл бұрын

Hi great video. My question is what setting do you use for printing do you have it to print on plain paper or glossy

@teresasdaisy 3 жыл бұрын

Great explained video. I have a question. I've seen videos, just like this one, but they apply the waterslide, face down. Is this something that also can be done ?

@chantelleblackson9238 3 жыл бұрын

Hi Sandy! This is the easiest video to follow! Thank you! What is the name of the long script font on the tumbler sitting in the background?

@jayceelu5464 4 жыл бұрын

I love your videos! So very helpful. You’re a great teacher. Do you ever have an issue with your ink bleeding after you apply the water slide? I was sure to seal mine with plasti glossifier and it bled. I did remove the no bleed option on my printer too! Perhaps I should try the rustoleum brand. 🤷🏼‍♀️

@SandysOrganizedChaos 4 жыл бұрын

Thank you! And it sounds like you may not be using enough of your spray sealer. I hear that people who use the plasti glossifier do a couple of coats. Next time you need to purchase a spray sealer I would give what I use a try. One good coat and done.

@kimmied546 2 жыл бұрын

Hi Sandy! So happy I ran across your video. Is it an easier way to know if a waterslide decal will show up on the color your using on your tumbler? I ran into this problem with a tumbler that I had already used brite tone on only to find out that the decal was waaay too transparent 😩😩 now I have another order on a different tumbler and am scared to even start glittering it because I’m not sure what color to use to make sure that the decal will show. Sorry so long! Lol

@billiejamison9851 3 жыл бұрын

Thanks! Have you ever layered waterslides on a tumbler/substrate? Or is that even possible?

@IGFineArt 4 жыл бұрын

So nice craft tutorial...👍👏👌

@AG-we8gg 3 жыл бұрын

I also like to have some printed already n put away for when I need them. Do you spray n seal the design right after printing n then put them away got another day or right before your about to use them?

@bettysullivan8562 3 жыл бұрын

If I want to add a photo to my tumbler, would water slide work or use printable vinyl ? I’m new at this so need help. Thanks. Loved the video

@jenniferdodd701 3 жыл бұрын

I have the ink not the cartridges will it still work on the water slide paper. This is my first time and u did a good job on showing me the steps. Thank u

@naiomisweets8942 3 жыл бұрын

Thank you fornsharing. Do you have to use epoxy over it? I've never used epoxy and worry a out applying it to mugs. Any info would be soooooo appreciated.

@bfffl13 3 жыл бұрын

Love how easy you made this look!! I’m so ready to try and make my first water slide decal tumbler!! I do have a question though.. The reviews on the transparent water slide decal paper on amazon, said you have to mirror the image before printing it out? But I didn’t see you do that, and I just wanted your opinion on that before I purchase it because now I’m confused lol

@SandysOrganizedChaos 3 жыл бұрын

I don’t mirror my images. I know some mirror theirs and apply it by facing it down onto the tumbler then sliding the backing off. I just do it as the instructions on the package state, or as you see me do it in my video.

@lisamancha149 3 жыл бұрын

I love your work!! So amazing!! I want to start making tumblers. I have a question I live in an apartment.. I do have the mask but I’m afraid doing the tumblers in the kitchen right next to the door won’t be ventilated enough ? Any recommendations?

@SandysOrganizedChaos 3 жыл бұрын

You could always get two box fans. One in a window bringing air from the outside in, if possible, and the other fan facing out the door to help keep the air circulated. Just make sure the air isn’t blowing directly onto your work. You just want it to be lightly moving the air around and out.

@celinadomagalski5160 3 жыл бұрын

Hi there! Everything I've been researching says that the decal needs to be sealed. If I apply a waterslide to something like those insulated koozies (like Brumate), how would I seal the waterslide if the image is mirrored and applied upside down?

@primadonna29906 3 жыл бұрын

Which paper do you recommend to apply wording to ceramic plates?

@silo122 Жыл бұрын

Thanks for the video! Quick question for you as I'm having issues with my water slide. How long do you leave it in the water and does the temperature of the water matter? Mine doesn't seem to be separating well and it's messing up the picture.

@fatimahuerta7525 4 жыл бұрын

Thank You for your video, very very helpful. I need to apply a clear full wrap waterslide and after epoxying and dried, I was left with with two little needle size protrusions and one bigger one. I know if I sand them, they will show under waterslide. Do you have any suggestions for this problem? Thank You ❤️

@SandysOrganizedChaos 4 жыл бұрын

If you’re worried about the sanding showing through, just apply another coat of epoxy just to make sure it’s completely smooth for your application.

@lynnallen53 Жыл бұрын

Sandy I love your videos. I've learned so much from you. May I ask where you find your waterslide graphics? I just bought waterslide paper but don't know where to get the graphics. Thanks in advance. Lynn

@heatherbrown9324 3 жыл бұрын

Awesome video, I appreciate you showing how to do this.. I do have a question though, why do you spray the decal with a clear coat spray?

@SandysOrganizedChaos 3 жыл бұрын

It’s habit. I feel the epoxy sticks better if I apply the spray sealer first.

@toscha1973 3 жыл бұрын

So if I'm wanting to put am image on a black mug, the white waterslide works? Thanks so much 😃

@50tmack 3 жыл бұрын

My first tumbler (recently) was with a water slide. I am near-certain it was a smooth enough surface, that I got all the water out, and I let it sit for 3-3.5hrs. It looked great. When I put on a coat of epoxy, some of the edges curled right up. Anyone have suggestions /advice? Thanks in advance!

@daniellejarrett9886 3 жыл бұрын

Can you use any printer and ink. Also can you apply this to any cup surface. I have the clear plastic cups.

@TC-um6ue 3 жыл бұрын

Hey which paper do you recommend for clear water bottles. Thanks

@annieferguson1084 2 жыл бұрын

How do you make sure your glitter tumbler has a “smooth enough” surface? I’ve herd of some people sanding them but I’m not sure the best way!! Please help!

@beautytrendz101 3 жыл бұрын

I use a cricut Air 2 and with my water slide I usually cut them by hand too but is there a way to remove that black border around the image since I am only printing from design space not cutting? Thank you!

@morgansegit1218 3 жыл бұрын

Which type of paper would you use on a glass mug?

@samanthasalazar6106 3 жыл бұрын

What app or site u go to to print your images, do custom names fonts and personal photos etc.. I have a printer no cricket machine. I want to get into doing tumbler water slide cups please help me I’m clueless lol

@joycelynmarty 3 жыл бұрын

I really enjoyed you video thank you! I have a question though. Can you use sublimation ink/printer with water slides?

@SandysOrganizedChaos 3 жыл бұрын

That is a great question. And I am not sure lol. From what I was able to find they say no. It needs to be an inkjet printer.

@abigaildurant445 3 жыл бұрын

Will any color printer work? I am just getting started and don't want to get a new printer as of right now but already have a cheap HP Deskjet

@aprilferguson2447 3 жыл бұрын

So say I have a motorcycle helmet in black, would I be able to use this method and would I use white background or transparent?

@makingMyHouseaHome412 3 жыл бұрын

Thank you. I saw where someone used what you did and plasti-dip. I could not understand why.

@samanthamooney6929 3 жыл бұрын

What printer do you have and what ink do you get from sams club?

@cocoagirl18 3 жыл бұрын

Hi, can I ask, how did you make the decal stay and not peel off? It was my first using it, and after a couple hours it peel off? is there any tip how to make it stick and stay? thank you in advance.

@wandafranco9516 3 жыл бұрын

love this video, I really appreciate your dedication. I want to know if once the procedure is finished on a cup, can I wash the cup without lifting the sticker? The other question would be, is it necessary to have special sublimation ink or can it be with regular ink? Thanks in advance.

@SandysOrganizedChaos 3 жыл бұрын

I would definitely recommend coating it in a sealer, like epoxy, to last. I just use whatever my inkjet printer recommends for ink 🤗

@wandafranco9516 3 жыл бұрын

@@SandysOrganizedChaos thank you for your response ♥

@taylorisrael8760 2 жыл бұрын

Hi, newbie here! Your video was so helpful, I feel like I can tackle this effectively! I do have one question, what is the purpose behind the spray? I like to know the why behind things and am curious, thank you!

@jasminedeadwyler1270 2 жыл бұрын

Spraying your waterslides help seal the them before you place them in the water just so the ink doesn't run off. The spray seals it.

@sayitwithatshirt 2 жыл бұрын

How do you get your colors to come out so vibrant? I have an epson ecotank 2850 that I just bought & converted in to a sublimation printer. My inks are printing out very dull. Do you know how I can get my images to com out vibrant? Thank u

@melodycrawford9943 3 жыл бұрын

Sandy I love your glasses, where did you get them ?

@SandysOrganizedChaos 3 жыл бұрын

Thank you! Lens Crafters they are Michael Kors brand. 🤗

@amandaramos3540 3 жыл бұрын

How long have you’ve been using this? I’ve seen some people always use a Cricut.. which I do want to have one later on in life but since I’m a beginner I wanted to get the hang of it first and be a little cheap