Beginners guide to modelling a wooden ship Part 9

Рет қаралды 18,866

Күн бұрын

Beginners guide to modelling a wooden ship. Part p
This is an entry level model, the kits are available on Amazon, AliExpress Lazada and other online stores for as little as $15us.
Please help me produce more video.
www.buymeacoffee.com/jimstein
or
PayPal
www.paypal.com/paypalme/jimst...
#halcon

Пікірлер: 42

@stewfly9227 2 жыл бұрын

looking forward to part 10 that's right around where I"m at in building this same model. your ship is looking fantastic

@paulmaurenbrecher5215 2 жыл бұрын

Hi Jim, I actually commented in part 5. But I wanted to know if you went past part 9. I am quite keen to see you do masts sails and rigging. regards and thanks.👍😃

@isidorvu 2 жыл бұрын

Thanks for sharing your experience with us! Can’t wait for part 10!

@cjstein2000 2 жыл бұрын

Working on it

@ivanradovcic379 2 жыл бұрын

THANKYOU I HAVE LEARN ALOT YOU GOOD TEACHER

@cjstein2000 2 жыл бұрын

Thanks

@angelu__3059 Жыл бұрын

I binged watch ur boat making videos since I'm a beginner at building and it helped a lot. The boat kit and tool kit I ordered are on the way and I'm very excited to try this. Ppl say that this is a great mind-clearing activity and just watching your videos helped me clear my mind, hopefully I feel the same while building one 😊

@cjstein2000 Жыл бұрын

Thanks

@davestrains6816 2 жыл бұрын

Cool idea on the applicator. cannons look great. Thanks for sharing. Dave

@cjstein2000 2 жыл бұрын

Thanks

@paddycrean4932 2 жыл бұрын

Hi Jim, I am in my 80s and have problems with my hands so your viideos have given me the confidence to make ship models. Thank you

@cjstein2000 2 жыл бұрын

Yes sometimes I just have to stop work and rest for a while, but I don't give up.

@leester9487 Жыл бұрын

Wholeheartedly agree. I'm only in my 50's, but I've been struggling as well, especially my eyesight. Thanks.

@roncalverley 2 жыл бұрын

2:03 Now! Who would have thought that such a simple idea could be so helpful! 3:14 Haha! It's contagious.😁 8:50 👍👍

@cjstein2000 2 жыл бұрын

I pinch ideas from everyone. 😀

@briangilbert3884 Жыл бұрын

Hi Jim- I see you haven't posted anything on this build for a year now, so I hope that doesn't mean you're not doing well... of course I'd love to see a little more on this build. I've thought about using this kit as a starting point and scratch building the details, so watching your process is helpful. But I can understand that making videos is a pain in the butt... I've thought about doing some myself, but never can seem to get that excited about all the additional work that it takes. So thanks for all the work you've done so far, stay well!

@cjstein2000 Жыл бұрын

Just got side tracked.

@kathypower9524 Жыл бұрын

@@cjstein2000 Hope you are well. Looking forward to seeing part 10 (and 11). Hubby is stuck (and frustrated), so the videos have been a tremendous help.

@MrTeddlpounds 2 жыл бұрын

Can’t wait for part 10 I am going to be starting a cheap Harvey model bought on Amazon I am very inspired by your skill and find your tips helpful and look forward to putting them to use

@cjstein2000 2 жыл бұрын

Thanks, my health at the moment is reducing the amount of time I can spend at the bench. Doing a little bit at a time.

@petethehawk5186 2 жыл бұрын

@@cjstein2000 we’ve enjoyed the series Jim and I hope you’re feeling well soon.

@cjstein2000 2 жыл бұрын

Back at the work bench now

@curtissuddarth1759 8 ай бұрын

Howdy Jim, I really appreciated this series very much. I bought one of these models because I figured it was a cheap way to get into the hobby. Did you complete this model, and if so any more videos for it? I learned a ton watching your craftsmanship. Thank you for your time 🙏😊

@CorrectAgain 2 жыл бұрын

hope youre feeling well jim (said your health isnt the best in a previous comment) its ok if it takes a while for you to post videos, quality content doent happen quickly, really appreciate the patience and effort youve put in to make these videos. I wouldnt have had a clue where to start without them. Part of me is thinking id like to build the mary celeste, but then another part of me is thinking maybe thats not a good idea, might bring bad luck......lol...on that topic, Do you believe the crew disembarking to the lifeboat and the line snapping theory? would love your opinion

@cjstein2000 2 жыл бұрын

Thanks getting better, managed to spend some time on the bench for the last few days

@donaldmatthews7226 Жыл бұрын

Hey Jim, just wondering if you have progressed further?

@kathypower9524 Жыл бұрын

Hubby is stuck on what appears to be the part 10 (and 11) sections. Have you (or anyone else) had a chance to work on them?

@leester9487 Жыл бұрын

Anyone know where to get the little cannons and perhaps anchors?

@cjstein2000 Жыл бұрын

I got mine including a dingy and anchors from AliExpress

@CorrectAgain 2 жыл бұрын

did you finnish the halcon jim?/ are you going to finnish her?

@cjstein2000 2 жыл бұрын

Still working on it

@RossPotts Жыл бұрын

😅😅😅😅 @2:10, holder downer…

@cjstein2000 Жыл бұрын

Need a better name, copied from Ron Calverly

@RossPotts Жыл бұрын

@@cjstein2000 no! It’s perfect!

@davidedel31 2 жыл бұрын

Hi Mr Stein, when you got the kit for the Halcon, did you get an instruction sheet for culling the sails? I am working on this ship kit also and do not have a sheet for cutting out the sails from the cloth. I you do have this can you please send me a copy of this page with the sails and their measurement so I can cut and install the sails. Thanks David

@cjstein2000 2 жыл бұрын

I didn't get that information, the instructions are very poor. No rigging diagram either.

@isidorvu 2 жыл бұрын

I have a sheet for cutting out the sails. How can I send it to you?

@cjstein2000 2 жыл бұрын

Send to jimstein@live.com.au

@isidorvu 2 жыл бұрын

@@cjstein2000 Sent...

@leester9487 Жыл бұрын

I watched video by @BoilerDan1 and he had a great suggestion of running CA along the edges after you've marked them out on the canvas, to keep the canvas from Fraying.