for anyone that wants to quickly swap between the sloooowwwwwweeeessssttttt settings... 2:48 pedal off 1:38 slowest normal 3:13 slowest w/ mod

Another fun mod is to have your capacitors slightly mismatched, this makes the LFO cycle uneven and sounds a bit like a garbled cassette.

I did it! Thanks for the instructions. First-ever pedal mod. I have a minimum of electronics and soldering skills and your video made this dead easy. Quite frankly the hardest part was the switch placement. I opted to move it a bit to the left so that it would be under the "mode" slider switch and it was a bit tight--had to monkey around with the drill to make the hole a bit larger but eventually got it in and it still looks good. Bought the pedal for $20 on sale at Sweetwater plus about $10 for the capacitors and switches. Sounds 100% better. (Plus enough capacitors and switches to make 9 more.

hey man, just wanted to thank you for this. my vibrato sounds way better now!

Just got this pedal today, going to do this mod. Thank you so much !!

The slow rate sounded so much better to me so last weekend I did the mod (without the switch) Found it a bit fiddly and had to use a magnifier and a cuppa coffee but it went well and the pedal sounds great now. Thanks so much for the video!

duuude, this is exactly what i was looking for ,thank you!!!! super helpful

I had just started looking for vibrato pedals with a slower rate than the UV300. Found your upload, and now I don't need to buy a new pedal. THANK YOU!!

I tried it with beer. Still works great. Thanks alot for the video!!

I've been meaning to do this mod for a while. Thanks for making the video, it's really helpful!

Just ordered one… Gonna give this a try

Thanks a lot. I was going to buy this pedal until I saw your review. Now without your incredible mod I don't want those pedal I want that super slow mod. Awesome awesome job though.

Very good instructions, very clear. Excellent diagrams.

This mod is so incredibly useful.

I would buy this pedal right now if behringer had them all with your mod. Sounds fantastic

Nice vid bro! Just got one of these, can't wait to mod it

Dude, you are best! Thanks for the information. There are many overpriced vibrato/lo-fi pedals, but Behringer with your mod is the best!

Amazing work all round!

Big improvement, thanks so much for the video!

fantastic video. thank you for posting.

Thanks so much! It's sounds amazing now

I had speculated it might be possible to change the oscillator range by adding some capacitors, but I hadn't put in the work to actually find the right ones on a schematic so thanks for doing the legwork!

Liked and subscribed! Informative and helpful, thank you. 🎸

I did it today, great video

I like the outcome! Definitely thinking about getting one of these and doing this mod. Gonna use it with synths to give them that "Boards of Canada" 'warped' sound while keeping the LFO available for patching to other things. :D

thank you! was stoked to fuck around with that MBV de-tuned sound with the unlatch mode, but the rate is too fast

Just wanna say thank-you, I just did this just 5 mins ago following your instructions, and it worked great without any issues despite my crappy soldering. Now I can have Boards of Canada synths to back my guitar! :D

Yo yo yo Bo! This is brilliant!

Thank you !!! it works great. Verified.

Great vid

I believe I misspoke when I used the word range. But you just need an SPDT switch that has the 1uF in parallel with caps 12 and 15 on the pedal. The two contact points are the bottom side of C15 and the top side of C12.

damn that sounds good, thx for viddy

This sounds way better and I love the way it can revert back to stock settings. How big a switch did you buy. Is there a product number? Thanks.

Think I'm gonna do it

Thanks man!

Hi and thx a lot for this step by step tutorial, super useful !!! Something I don’t understand. Are you replacing the old capacitors or are they still in place?

Just bought one with the mod :))) can't wait !!!

If your vibrato depth is flatlining with this mod, I was able to fix it by getting a different type of ceramic capacitor (same value). Additionally, you can place a resistor in parallel with R5 (between 150k - 200k ohms works) to get a lot more sensitivity out of the depth pedal. I highly recommend this resistor mod. You can solder the resister to be always on (no switch) because all original depths are still possible on the dial, there is just a greater top range.

Hi! C12 and C15 are connected. You only need one cap. Put it in parallel by connecting with an SPDT so that you are soldered to the bottom of C15 and the top of C12. I use anywhere from .1uF to 1uF.

If I want to have it permanent do I need to put capacitors in the line ore is it enough to bridge them with just a cable. Thanks a lot for that great video!!!

Nice

buenisimo

You have to be oh so careful doing this mod. I have done a lot of these for customers. Managed to mess up twice :)

Great tutorial man. It would be great if you could provide some links to all of the tools you use to do the mod.

Pretty sure the whisky voids the warrantee

Someone should make a video on how to transfer Behringer pedals to a metal enclosure. A million views, I’ll bet.

Question. Can you use a DPST switch? DPDT switches are ON-OFF-ON, where DPST switches are just ON-OFF. From the schematic it looks like the second “ON” of the switch isn’t being used. Great video! THANKS!

Oh man! Do I hear Callisto? One of my favorite bands!

Thanks for the tutorial! What size drill bit are you using for the switch?

Are the wires a specific type of wire? Would i be able to find them at my local hardware store you think?

I thought this was a good idea, thanks, I really appreciate your efforts. I personally found that for my taste, as it is, the after mod depth control was almost ineffectual, and the fastest rate was too slow for an organ effect along with what is for me a too slow and subtle slowest setting, so rather than faff around drilling holes and adding wires etc. I just wired one of the caps across c15 and got a fully usable range and depth control. Even simpler and quicker, as no switch needed (unless you like ultra-fast vibe).

this video has too few views

I'd totally f this up if I did it. Are there any cheap pedals that go this slow as standard? I much prefer the sound.

Would 50nf caps make the effects half as pronounced? I'm trying to find an ideal value for an always-on mod (that skips drilling, and switch soldering)

I've been skipping around this video as I make this mod. I think I've heard how cool alcohol is about 50 times today.

you can also just do a 330nf in parallel with c15

Is there a similar mod for the depth control? I imagine it would be done with another capacitor?

Is there a way to get a slow uneven rate by slightly mismatching the caps? I'm looking for a warped vinyl-like vibrato

Out of curiosity, do you ask to use the clips of other youtubers even if they are super short and show the creator in a positive way? What's the etiquette for those situations like with the Josh Scott clip for example?

If u wanted to mod it faster switch what would u do

Hi. Thank you for your wonderful video. I am gonna mod mine as well. But what kind of capacitors are you using exactly? Do you maybe have a link to musikding, like you do for the switch? Thanks again!

Hello, Would this be possible on the behringer ultra tremolo pedal? the rate speed at its slowest setting is also too fast to me. thank you

If I just jump circuit the caps it will leave the mod on?

A 1uF cap will allow you to slow it completely down without changing the range.

but what if your guitar had floyd rose, would you still make this mod? and one more: can we just wide the range down to slow limit without losing fast limit, but changing one capacitor or resistor?

I wouldnt recommed trying this without decent soldering skills

I want to make sure I get the right kind of switch. Do you have a link to the one you bought?

What did he do in the 2nd of the videos. What did he repair?

damn. too much hassle😅. any pedal recommendations with slow rates for vinyl type effect?

Thank you! Does it suck tone or volume?

behringer or kokko vibrato please someone recommend me!!

First! I'm so cool!

did ya find a schematic online for this pedal?

Hey, thanks! A question for all: I just did the mod, and it works! BUT! After a few seconds on the slower setting, the pitch wobble depth decreases over about 10 seconds to nothing. The vibrato disappears. If I jiggle the rate knob, it comes back. And ideas what the problem could be?!

Bassists: DIY a blend pedal, put this mod'd vibrato in the loop and you've got bass chorus

Bought a modded one on reverb and the modulation isn’t near as deep as yours... any ideas why that would be?

Is there any to make this faster as well?

I’m 16 can I still get whiskey? Is it that important?

Does this mod work for the VB-2W? I know this is a "clone" but I don't know if that means the circuits are literally identical.

So, for non-switchable mod do I have to put a 100nf cap on c12 and another 100nf on c15?

Adding a switch and all the wire is too complicated for me. I think i'll just add the caps directly.

4:22 what's this for again?!

does this mode affect lacht unlatch function ?

I cant for the life of me figure out how you soldered the switch

So how many Behringer pedals have you broken? How many people do you know that have broken more than one? Why does everybody just repeat what they've heard and read...that "they aren't made to last" ? When they likely have zero experience with multiple Behringer pedals breaking(or even a single pedal) to say they aren't made to last. I have one from 2006 that's still working fine. If they were as crappy as you all make them out to be, it shouldn't have last more than a year or 2 🤷 That's the one thing I've noticed more than anything. Guitar players will repeat something as fact just because they hear it enough times and without having any personal experience or any facts to back up their claims. And no, I didn't have 10 pedals and they all broke except this one. This is the only one and it's been working fine since 2006. The original owner gave it to me last January when I started learning to play. He used it for 13 years until I got it.

I quit drinking in January.....grrrrr, don't tempt me.

4:27 im 13-

I’m garbage at soldering, so probably wouldn’t do this.