This has been driving me insane for 10 days! I'm no newbie, and no expert, but this desk had me totally head-scratching. Not using the XLR outs seems so insane. Odd routing. I cant thank you enough. Great guides. 😍

Just wanted to say your videos have helped me out immensely and i appreciate your time and effort in making them, hope your doing well and again many thanks.

You've lighted up three years of wrecking my brains to figure out how to record with this engine. It's so shameful these Germans are so cryptic about it in the manual, making me think this feature wasn't there at all. You've been drastically beneficial to my music career. So, thank you.

Been trying to figure out this mixer… thanks for showing how to use the effects it has been driving me mental

You are a very good teacher Elias. Thanks alot for this video.

Omg. You helped me with the FX. Main Mix must be on... ok. THX a lot dude.

USB interfaces can carry many channels of audio. My Motu 8Pre can record up to 16 channels of audio over a standard USB connection to my computer...The limit of only 2 channels is not due to the fact this mixer uses a USB interface.

Is there a distortion and overdrive effect included in the FX section on this mixer?

I like this I wish.

genial!!

merci😍🥰

I'm guessing if using with multiple speakers a. They need to be active speakers or have an amp for passive? And also if I was to hook up a set of active speakers thought back XLR can I use the front 1/4 inch jack on the front as well? Also can I use the sub outs to a separate amp for monitor speakers on stage? Thanks

Was the ability to enable track monitoring not a function back when this video was made? Wouldn’t that make it so you inherently hear what you’re recording?

Hi, Thanks for the tutorials on this product. They've been helpful, but I didn't find my specific question answered in any of your videos on this mixer so I'm gonna ask here. Right now I'm looking to buy a new audio interface or mixer. The problem with my old M-Audio Fast Track Pro was that I could not record outboard FX with it. Whenever I would try to record with my Korg Kaoss Pad I would get a buzzing sound which I figured out later was called a feedback loop. Apparently you simply can't plug in the outputs of the Kaoss Pad into the inputs of the Fastrack Pro, and the outputs of the Fast Track Pro to the inputs of the Kaoss Pad. I was considering getting a Steinberg UR-44, but in doing a little research I found that some people were basically having the same problem with trying to record other outboard FX. I've never used a mixing board in my own setup. I've always had an audio interface so I'm not sure if a mixing board with an FX/Aux send will do the trick. Do you think that with the fx or aux send capabilities of the Behringer X1622 I will be able to connect my Kaoss Pad to the mixing board and record FX with the Kaoss Pad on my computer without having a feedback loop problem? I have one other quick question. If I plug in headphones to the mixing board will that automatically shut off outputs connected to speakers?

Hello. Please, I need help. I have a Behringer qx1204usb. I want to record an improvisation with my guitar over a playback. I need to listen by my microphone what I’m playing vía usb and at the same time, listen the playback via usb too. I need to know how to do it and whether this mixer is way out and in vía usb simulteneously . Thanks a lot

problem, if I using microfon with Effects FX,microfon signal going ONLY to MAIN OUTPUTS. SUB OUTPUTS and CONTROL ROOM I have Only Microphone signal no Effect, whay? I play live music and I need 3 different outputs work Together same time,how I can fixed, thanks

You have 2 mixers and were not able to record your voice with a mic and the "Monitoring" sound of the Behringer control room line so both could be listened to? I had to volume up the sound to hear your voice and had to reduce volume once there was an output on the monitor/control room line. That, in a kind, ruined a very useful video. And you could have described the "two knobs" of the FX section more precise. The 3rd knob, the one in each input line, just defines how much of the sound effect is present on that channel, so one can differentiate the hall effect between the lead singer and the background voices. The left knob on the FX section itself works like the gain knob on the mic lines and should be set so, that on loud parts the vu meter beside the FX indicator do not clip. The right knob kind of works like the volume level of each channel, it sets the level how "loud" the effect is mixed into the master signal.

how to senc pc sound to control. Its routing to main

Hey Elias, I have a question about the Behringer xenyx ufx1604...I'd like to be able to record my 3 man band all at once into Mixcraft 6, (or if there's any other software I'd need) and edit the channels individually in the software. Thanks!

I have one question. I see that you can direct one of three sources to the phones/ctrl room output. Can you select multiple sources? Like, can I listen to Sub 1-2 and 2-Tr/USB in Phones/Ctrl Room at the same time? Thank you so much if you see this.

can i use this mixer on events like show? because someone wants to sell to me but im scared maybe is too small for 6 speakers and two sub bass ?

there is something little confusing in this tutorial because by not pressing the red button above the room/phone controller normally you can't get any sound from you computer back to the mixer even if the main mix is controlled by the phone/control-room controller can you explain us how it works?

Hi, what model Presonus do you have?

Hi, i have one question about this mixer. I try to connect by USB on my Mac and on my PC but i cant send or receive sound by usb. I see the x1622 mixer in my sound device on each computer, but no sound :s can u help me ?

Is this mixer a powered or a passive mixer?

Tell us about the software

Hello, I want to ask some Questions. I use this mixer x1622usb but when I plug my electric guitar on the mixer the sound is good but when i want to play it on my Guitar Rig & Amplitude on my DAW, there's no input signal and the sounds is still the same just like acoustics guitar on every effects that i use so how to solve it.

Isn't that you doing called analog tracking ?

hi Elias i'm trying to connect the speakers in control room as you said but still i cannot hear any sound coming out while the usb button is up..PLEASE HELP..

hi. i have a x1204 usb and i'm having trouble working with the fx. the volume is too low to matter how much i turn up the volume knob.

ok so if i need to record 8 channels live from the mixer I would need to use firewire not usb. I would need a firewire port-?

Hey Elias, i just found your channel while i was looking up demo videos on the KRK monitors. I must say, you have a great channel here, so i had to subscribe. What camera did you use for this video? Great job.

Edit this great review to bump up your mic volume.

What's FireWire?

Can I connect this mixer to a powered speakers

Как выключить ехо на таком пульте

Those are trs not xlr

Ineeda a new piano 🎹 BUY new one😂🤔

This is Totally Misleading!!!! You can record ALL the mixing channells (or imputs) or your band, voice instruments, etc. up to the numer of channels that are on your mixer. The thing you mean to say is that it will all ony record down on to one stereo or 2 mono tracks on you software on computer. I know, I just called my local Guitar center and asked the guys that sell them. Please report info correctly!!!! It was very misleading for me!!!!