Beiter Plunger Tipps & Tricks

Рет қаралды 62,972

5 жыл бұрын

In this tutorial we wil try to explain some of the special features of the Beiter Plunger as well as some Tipps how to better use it.
- Did you ever break a Beiter Plunger Wrench... well you will not anymore after this video
- Did you ever ruin a Springball of your Beiter Plunger... just a small hint how to prevent it
- How do you read the scale and work with it
- How do you choose the right Beiter Plunger lenght for you
- How to clean the Beiter Plunger
Facebook: Beiter
Instagram: @beiterarchery
KZfaq: wernerbeiter

Пікірлер: 41

@127TROOP 2 жыл бұрын

Excellent tutorial...thank you...NOW I understand my Beiter plunger......

@MrIanfurniss 5 жыл бұрын

Very useful info, and thank you for all your great products!

@re8ktor718 3 жыл бұрын

Herrlich Andreas, Respekt für das saubere Englisch, und für die wirklich helfenden Infos

@wernerbeiter 3 жыл бұрын

Vielen Dank!

@toxy1948 4 жыл бұрын

This is a great explanation-best plunger out there.

@wernerbeiter 4 жыл бұрын

Thank you!!!

@marjanpodrzaj1518 5 жыл бұрын

Thanks Andreas, useful tips for every archer. Best regards

@wernerbeiter 5 жыл бұрын

Welcome!! Took a while...

@m.j.rogers6801 5 жыл бұрын

Well done Andreas. I'll be sure to share. Thanks.

@wernerbeiter 5 жыл бұрын

Thank you MJ!

@kraffles 3 ай бұрын

Thank you, very informative.

@crispinduenas7297 5 жыл бұрын

Great reference video! Thanks Andreas!

@wernerbeiter 5 жыл бұрын

Thank you Crispin!!

@ArcheryGeorge 5 жыл бұрын

Yes Andreas, some great tips. Hope you are well.

@wernerbeiter 5 жыл бұрын

Thank you!! All good

@adriang.3866 5 жыл бұрын

Thanks! Very usefull tutorial.

@wernerbeiter 5 жыл бұрын

Gracias!

@jumpingjoly 5 жыл бұрын

Great tutorial!

@wernerbeiter 5 жыл бұрын

Thanky you!

@AntonLevshunov 5 жыл бұрын

Thank you, was useful. So, 17.5-23.0 mm and 21.5-27.0mm versions of a plunger have the same length but the size of the nut is different, right? And the 25.5-29.5mm and 31.5-34.5mm versions are long version with two nut sizes?

@wernerbeiter 3 жыл бұрын

Exactly

@mikebyford5258 3 жыл бұрын

This should be part of the user manual with such an expensive button

@wernerbeiter 3 жыл бұрын

Mike... it is available online.. :-) I mean this is better than a user manual.. you can watch it at anytime on your cellphone

@pufek77 5 жыл бұрын

Thank you

@wernerbeiter 5 жыл бұрын

Welcome

@slowmotionarchery 3 жыл бұрын

What's the reason for the round end on the wrench? Are two wrenches provided so that one is a backup or is there some other reason? Thanks!

@wernerbeiter 3 жыл бұрын

Dear Lester we had the yellow one since ever...and we gave 2 of them in each box. Than we realized that when the barrell was too close to the nut, you were not able to screw off the plunger from the bow as the open end of the yellow would not fit over the barrel. So we made the red/orange one with 2 open ends. We kept the yellow as it is, as it has the chance to better adjust the hex nut of the springball.

@slowmotionarchery 3 жыл бұрын

@@wernerbeiter Thanks!

@user-pr1fm3em5i 3 ай бұрын

@wernerbeiter you re totally german... Like mg3... But we want to PKM... Why dont you simplify things?😄

@lorrainehaymes410 2 жыл бұрын

Quick query, with a draw weight of 26lb would you suggest med spring at 7-8, or light spring at 5? Many thanks

@wernerbeiter 2 жыл бұрын

Start with center position 5 and find the spirngload needed by tuning the bow correctly

@lorrainehaymes410 2 жыл бұрын

@@wernerbeiter with the light spring?

@wernerbeiter 2 жыл бұрын

@@lorrainehaymes410 you can start with it...yes

@randallkadish5663 11 ай бұрын

Still have no idea how to measure the length.

@werneririscenterbeiter2066 11 ай бұрын

If you dont have a caliper just use a regular measurement scale and measure the screw in depth from the plunger tip front to the nut.

@polycrase 3 жыл бұрын

Why not make the wrench out of steel instead of cheap plastic?

@DemBones7 3 жыл бұрын

So you don't overtighten and damage your plunger or riser.

@BennerWild 3 жыл бұрын

Das ganze auf Deutsch wäre schön....

@wernerbeiter 3 жыл бұрын

Ja.. das stimmt.. aber es gibt so viele andere Sprachen und unsere Produkte sind in 180 Ländern erhältlich. Da wir ein kleiner mittelständischer Betrieb sind und selbst zu 100% in Deutschland produzieren haben wir nicht die Zeit und Möglichkeit Zeit zu investieren, die andere haben. Wir können uns vorstellen.. keine zufriedenstellende Antwort, aber wir konzentrieren uns auf das was wir können,...Filme zu machen gehört nicht dazu! Wir sehen nur, dass wir Informationen bereitstellen müssen und versuchen es in einer universellen Art und Sprache zu machen.

@BennerWild 3 жыл бұрын

@@wernerbeiter das verstehe ich 😉 bin auch so zufrieden mit ihm 👌🏻

@klausmuller8364 7 ай бұрын

Thank you for travelling with Deutsche Bahn...genauso doof