Belt Sander Conversion With Dust Collection

No video

Belt Sander Conversion With Dust Collection - 115

Рет қаралды 153,825

Күн бұрын

jayscustomcreat...
The entire lid is screwed on with 3 screws. The base is mounted to the platform with 3 screws. It takes less time to dissemble and change the belt than it does to put a dado stack in my table saw
--------------------------------------------------------------
Check out my website!
www.jayscustomc...
Free SketchUp video tutorials:
www.woodworking...
Support the site and get some gear!
www.cafepress.c...
--------------------------------------------------------------
Like and Subscribe if you like what you see!
--------------------------------------------------------------
Social links:
Twitter = / jaybates86
Facebook = / jayscustomcreations
SUBSCRIBE = / jayscustomcreations
Keek = www.keek.com/Ja...
--------------------------------------------------------------
Music:
"Octopussy" by Juanitos
is licensed under a Attribution 2.0 France License.
freemusicarchiv... Project plans: jayscustomcrea...
Tools in my shop (affiliate links):
Bandsaw - amzn.to/2gMHrjd
Bevel gauge (t-bevel) - amzn.to/2eYLB2N
Bluetooth adapter - amzn.to/1GDYgFl
Dado blade - amzn.to/210w6ex
Dewalt planer - amzn.to/1IGqVoz
Dewalt sander - amzn.to/1IGt0B6
Dewalt countersink - amzn.to/1ThxZQi
Dewalt trim router - amzn.to/2istJn9
Dovetail gauge - amzn.to/2bJpxIi
Eclipse quick release vise - amzn.to/1PUkyEW
Engineer square - amzn.to/2bqS0lA
Festool Domino - amzn.to/1IGrQ8u
Forstner bit - amzn.to/2fMph1z
Glu-Bot glue bottle - amzn.to/1LrKulZ
Gyokucho 372 japanese pull saw - amzn.to/1TgnE9i
Irwin Marples 10" blade - amzn.to/1klkIIr
Kreg K4 - amzn.to/1V4LTGM
Kreg DB210 pocket hole machine - amzn.to/1pFvmwU
Kreg Mini - amzn.to/1phH3cQ
Marble router bit or drill bit - bit.ly/1HIAZCA
Megapro NAS Driver - amzn.to/1OH8H8v
Milwaukee plunge router - amzn.to/2gSr5Ci
Mp3 earmuffs - amzn.to/1RF5CZq
Narex marking knife - amzn.to/2ciT7K2
Ridgid miter saw - amzn.to/2h0Xf2s
Router Lift Router - amzn.to/2zVUV2L
Rustic pine Briwax - amzn.to/1EnC0Jg
Ryobi 18v brad nailer - amzn.to/1Q3zZdG
SawStop titanium series blade - amzn.to/1OQUXbr
Scraper BAHCO - amzn.to/1PTR4Ie
12" speed square - amzn.to/1QY7BKg
Spiral router bits - amzn.to/2BnOINX
T-bevel (bevel gauge) - amzn.to/2eYLB2N
Table top hold down clips - amzn.to/2oP1wtw
Tudor brown briwax - amzn.to/1TnDPxC
Wax brush wheel for drill - amzn.to/1PtRYLi
Wood glue - amzn.to/1lZOwfc
Woodriver #4-1/2 - amzn.to/24pY95R
Woodriver #62 - amzn.to/22aF3F0
Social links:
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86
Mailing Address:
PO Box 33
Mathiston, MS 39752
Want to help support what I do? Here's what you can do:
Buy a Plan: goo.gl/L7wNIF
Patreon: / jaybates

Пікірлер: 99

@onlyinfresno 9 жыл бұрын

Awesome version of the other belt sander video I watched. Taking both ideas and making my own! Thanks for sharing Jay.

@michaelpeirce641 6 жыл бұрын

Love it. Practical, cheap, no floor space, easily made=right up my alley!

@JohnHeisz 11 жыл бұрын

Great job, Jay! Thanks for the mention, much appreciated!

@biscottiapplebutter 9 жыл бұрын

I LOVE YOUR CHANNEL. Such great projects!!! I am converting my garage to a full fledged workshop as we speak and found many great ideas here. Keep up the good work man

@alexsemine1 10 жыл бұрын

Cool solution and cool orange T-shirt. I remember seeing in some video that it's a good idea to give some angle between the direction of motion of the belt and the table, keeping the surfaces (table and belt) perpendicular. Doing this you'll be wearing the belt in a more homogeneous way.

@stevansheets 11 жыл бұрын

So great! Very practical! Thanks for posting, Jay!

@DDT8387 6 жыл бұрын

This is Bulls hit. You make it how you want it . I thought I was seeing something new . Love you

@50sventovit 8 жыл бұрын

Excellent idea. I will try to make something similar for my large belt sander. Thanks for the video.

@jeffnordengren3797 10 жыл бұрын

Well now that Ive read the comments it looks like im def not the only person inquiring about the belt change. You should do a vid on how to change the belt. New sub here and love your vids! Really creative and is inspiring me to do some of this myself. Cheers!!

@JayBates 10 жыл бұрын

Thanks for the kind words Jeff. I appreciate it. Belt changes are easy, just remove the few screws that hold the machine down and change as you normally would.

@BackyardWoodworking 11 жыл бұрын

Good use of an old tool.Nice design. Roland

@JayBates 11 жыл бұрын

I knew that was coming ;) The entire lid is screwed on with 3 screws. The base is mounted to the platform with 3 screws. It takes less time to dissemble and change the belt than it does to put a dado stack in my table saw

@sjbelaire67 11 жыл бұрын

Thanks for the response Jay!

@greypoet2 10 жыл бұрын

Thank you. I can now get rid of the crap I've been trying. Subscribed!

@ericdefratis7109 11 жыл бұрын

Looks good. Always like ideas like this.

@MrDpoling 10 жыл бұрын

I've been looking for this vid from you. I have been wanting to figure out how you did this! It's on my todo list.

@chrisneal4496 6 жыл бұрын

Dusty air flow can be improved using the 'Franklin' effect, designed for the 'smoke free chimney'. Basically by restricting, tapering and shaping the air intake, it speeds the rate of movement of the air across the nearer surface and increases the efficiency of the dust collection, clearing of the intake and reach of the surrounding area.

@notaflightmedic 10 жыл бұрын

I found an OLD belt sander at a yard sale for $2. Plugged it up and checked that it worked before I bought it. I was excited. I finally picked up a belt for it today. Only thing is....the sander takes a 16" belt. I can't find a belt to fit it now. So, I am shopping for a belt sander again.

@JayBates 11 жыл бұрын

Apartment complex. I'm maintenance. More info on my website :)

@christiankrippler9162 8 жыл бұрын

Cool design...I'm working with a rigid belt sander. Will have to give this a look. Great videos by the way. I heard April Wilkerson mention you in one of her videos...

@tiffanyjohnson3110 8 жыл бұрын

Your music & editing is the best out there. #superfan.....lol

@nobuckle40 10 жыл бұрын

Been meaning to build one of those for some time. Just have to get a belt sander first.

@timpetsche 7 жыл бұрын

best one I've seen yet good job

@Bennetts74 11 жыл бұрын

Great job I will have to make one for my small shop

@thalesfeitor 10 жыл бұрын

Excelente trabalho amigo!

@JayBates 11 жыл бұрын

Thanks. It is excellent.

@JayBates 11 жыл бұрын

Thanks. Yeah man, no problem. Thanks for the inspiration.

@TomNomNomDotCom 11 жыл бұрын

Ah; I must have missed that! Nice work through and through in that case :)

@JayBates 10 жыл бұрын

At the very beginning you can see the exposed lever tension release. To change the belt in the new setup I have to remove 6 screws and dissemble the unit.

@marlawhite3682 8 жыл бұрын

great idea!! going to do this!!

@LutherBuilds 8 жыл бұрын

I think this is the very first video of yours that I watched. I think I found this video from watching John Heisz build his stand for his belt sander.

@JayBates 11 жыл бұрын

Two big thumbs up!

@presapus 8 жыл бұрын

Nice! thumbs up on this one...If I may suggest turning the music down a hair so we can hear you better. Nice job.

@JayBates 11 жыл бұрын

Thank you.

@paparobert13 10 жыл бұрын

Great video. Love the idea.

@summerswoodworking 11 жыл бұрын

Very nice and good job Jay! How well is the dust removal?

@Woodentoolcompany2 11 жыл бұрын

Looks good. I'm also a function over fashion kinda guy.

@CafeRacerGarage 6 жыл бұрын

this is bad ass and I'm so doing this :) thank you for the idea

@fluppir 10 жыл бұрын

Sweet man, my next project will also be one of these! (A functional one at best) tx for sharing!!

@michaelhuotariKJV1611 8 жыл бұрын

Thumbs up! Nice Job Jay!

@JayBates 11 жыл бұрын

Thanks!

@TomNomNomDotCom 11 жыл бұрын

Nice work :) you probably shouldn't have nailed the top piece on if you wanted access to the belt change bit though. Perhaps a hinge and catch instead?

@Tahnvalas 10 жыл бұрын

Great vid! You got yourself a new sub sir!

@KBBAKTHA 8 жыл бұрын

i LIKED THIS belt sander station very much and i am right now working on making one for my belt sander. Your design and system of mounting the tool on to bench would be suitable for my belt sander, Let me complete my project and share a picture with you. Thanks for your nice tutorial on thisl. Happy New Year.

@RJBWoodTurner 10 жыл бұрын

Great Video Jay, What size belts does that sander take?

@sirjohnbhoy 11 жыл бұрын

Thats great!

@johnhammond5314 10 жыл бұрын

Jay, was that your homemade French cleated router used in this project? By the way, your ideas and adaptions are brilliant. Aussie John

@ms0099rg 11 жыл бұрын

good stuff as always !!!

@JayBates 11 жыл бұрын

You're very welcome :)

@JayBates 10 жыл бұрын

Thanks! 4x24 if I'm not mistaken.

@CONTAINERMAN68 9 жыл бұрын

You could have hinged that top cover in order to change the belts?

@JayBates 10 жыл бұрын

Yes

@JayBates 10 жыл бұрын

Not sure on the brand. Its a 5hp 20 gallon I keep in another room.

@JayBates 11 жыл бұрын

remove 6 screws and the sander is mobile again. Takes less time to change the belt than put a dado stack in my table saw. In the description :)

@Peter-976 3 жыл бұрын

Is it a hassle to change the belts?

@alorr4uz 10 жыл бұрын

Good question from earlier, how do you change the paper? I have a bulky orbital sander Id like to mount up and I'll use some of those ideas.

@sjbelaire67 11 жыл бұрын

Nice project Jay...great job! On another note...how are you liking that Grizzly band saw, do you recommend?

@ginoasci2876 7 жыл бұрын

just my 2 cents, not a suggestion, im just wondering if it wood work if it could also turn the whole assembly 90 degrees clockwise to have two directions for sanding. your design has square flat surfaces so it could easily sit flat on it's right side so the sanding force is downwards. in some cases not fighting the side wards pressure is easier. then flipping it back to your original position and reattaching the original table. youd have two mmachines in one if its not too complicated. like i said, just my 2 cents.

@gb29855 10 жыл бұрын

great job Jay ...but how are you going to access the belt ?? everything seems glued and nailed

@JayBates 10 жыл бұрын

Take a couple screws out.

@joedogg707 9 жыл бұрын

Aren't you limited to the bottom of the belt area though? I know you had limitations because of the shape of the sander itself, just wondering out loud is all. Thanks, another nice useful build at no cost.

@atFullStrength 9 жыл бұрын

***** I thought the same and I would just raise the platform by adding 1/2" sanded plywood every so often.

@EthanDickerDesign 11 жыл бұрын

So where is your shop? In your house? I think i see a kitchen in the background :)

@theBarefoot 10 жыл бұрын

I just stick my belt sander in a vice when I need to.

@SkunkTreeCarvings 11 жыл бұрын

is the table 90' to the belt..? i didn't see you square it up.

@paulneeds Жыл бұрын

How do you get access for drive and sanding belt changes?

@charliecroker7380 10 жыл бұрын

Great idea, been thinking about doing it with my redundant sander. By the way; what does it say on the back of your T-shirt?

@frankb4449 10 жыл бұрын

Nice vid Jay, what kind of air compressor are you using with your nailer? Thanks

@JayBates 11 жыл бұрын

full article about it on my website

@telltina001 8 жыл бұрын

ok just seen the answer, six screws, thanks Jay.

@Stenkish 10 жыл бұрын

And people say Simple can't look good. Imo simple is the best solution...

@maturitycostyounothing 5 жыл бұрын

where did you get the dust collection port you added? Do they sell them at harbor freight?

@060hunter 9 жыл бұрын

Like your belt sander station but how do you change belts?

@JayBates 9 жыл бұрын

060hunter remove 6 screws with a drill.

@eggfuyung9214 10 жыл бұрын

Is your belt sander automatic? Or do you have to hold down the trigger in order to operate it?

@JayBates 10 жыл бұрын

The handle has a button lock.

@jeffnordengren3797 10 жыл бұрын

Ummmm what about the belt change? You have to take everything apart?

@JayBates 10 жыл бұрын

Read the description please :)

@jeffnordengren3797 10 жыл бұрын

I like the electrical box. Is that code?

@JayBates 10 жыл бұрын

Probably not. It's not hooked up anymore though.

@AngieWilliamsDesigns 10 жыл бұрын

I hate belt sanders. I think this is a great idea to use them.

@joedance14 5 жыл бұрын

Nice jig. Please ditch the music - it’s really annoying. Also be aware that at some point, it might be desirable to use your belt sander in a vertical position, or a horizontal position (I.e., on its back). Good work, as always. Best wishes.

@JayBates 10 жыл бұрын

It might be cheaper to buy a belt online than a new sander.

@geert108 11 жыл бұрын

How do you change the sandpaper

@nickdiamond5404 10 жыл бұрын

Jay you could have sold that belt sander for close to $250 and just bought a cheap belt sander/disk sander combo and had another $100 for something else...I know because I had the same one and sold it on Ebay for that much.

@romenorom 10 жыл бұрын

How can you turn this belt sander on or off?

@telltina001 8 жыл бұрын

is it simple to change the belt?

@nigeldavies8900 9 жыл бұрын

Jay what does it say on the back of the T-shirt, gotta know.?

@jsaurman 9 жыл бұрын

nigel davies The same thing as the front of the shirt...

@nigeldavies8900 9 жыл бұрын

of course, walked into that one

@7Glauco7 10 жыл бұрын

how the hell do you change the tape?! disassemble all????

@Reelmediacoach 9 жыл бұрын

How do you replace the belts?

@JayBates 9 жыл бұрын

The description says: The entire lid is screwed on with 3 screws. The base is mounted to the platform with 3 screws. It takes less time to dissemble and change the belt than it does to put a dado stack in my table saw

@Reelmediacoach 9 жыл бұрын

Ahhh, I see. Great project. I have been wanting to do something like this for quite some time now. I think I have a good idea on how to make one using my belt sander. Thanks!

@JayBates 10 жыл бұрын

plug it in...