Bending a 3D Pattern Along a Face with Flowify - SketchUp Extension Tutorials

Рет қаралды 80,690

Күн бұрын

In this tutorial, learn to use the SketchUp extension Flowify to bend a 3D extruded pattern along a face.
♦DOWNLOAD FLOWIFY♦ extensions.sketchup.com/en/con...
♦SUPPORT ME♦ www.thesketchupessentials.com/...
♦OTHER FLOWIFY TUTORIALS♦
• Creating a Spiral Stai...
• Bending Shapes in Sket...
♦Courses♦ www.thesketchupessentials.com/...
♦Website♦ www.thesketchupessentials.com
PLEASE LIKE AND SUBSCRIBE
More SketchUp tutorials and resources at www.thesketchupessentials.com
Check Us Out On -
Twitter - / easysketchup
Facebook - / thesketchupessentials
Pinterest - / easysketchup

Пікірлер: 109

@sipivu 3 жыл бұрын

Each of Justin's video teaches me a lot. They are really clear, well structured and very informative.

@vicarioustube 2 жыл бұрын

Thank you VERY nice as always

@willembuiting 7 жыл бұрын

Great video again Justin! One of the few that explain this extension well.

@Thesketchupessentials 7 жыл бұрын

Thanks Willem! I had a ton of trouble learning to use this extension because some of the other tutorials weren't as clear as I'd like. I'm trying to make all of my flowify tutorials super simple!

@miraclespyer 7 жыл бұрын

I always like these videos before even watching them!

@Thesketchupessentials 7 жыл бұрын

Thank you very much!

@fatimaaldolaimi9936 Жыл бұрын

thank you so much , very good job ❤❤

@861063 7 жыл бұрын

Great video... I see a lot of uses for it. Thanks Justin.

@Thesketchupessentials 7 жыл бұрын

Thanks for watching Gerrit!

@jaffersiddiqi2455 5 жыл бұрын

Thanks i love the way you teach!

@Thesketchupessentials 5 жыл бұрын

Glad you liked it!

@HeyHeySav 5 жыл бұрын

thank you!

@rychystvincent4095 6 жыл бұрын

You're a good teacher.

@Thesketchupessentials 6 жыл бұрын

Thanks very much - I appreciate it!

@user-ko2ih1ri5v 3 жыл бұрын

Thank you

@hodakananimoghadam6715 2 ай бұрын

Very clear and useful video😊

@Thesketchupessentials 2 ай бұрын

Glad it was helpful!

@aartisapariya2187 4 жыл бұрын

Thank you...very much.

@blackstar-bk5ut 4 жыл бұрын

You are amazing *-* thanks you very much for the video^^🌸

@Thesketchupessentials 4 жыл бұрын

Thanks for watching!

@sudhammikalaksiri1479 6 жыл бұрын

Beauty lesson-Again-Tks

@Thesketchupessentials 6 жыл бұрын

Thanks! Glad you liked it!

@apoorvakulshrestha1445 4 жыл бұрын

Hi Justin, thanks a ton for teaching us through your extremely informative tutorials! I have been tryoing to create a pattern of small triangles using flowify on a curved wall (made using 2 point arc tool). Although i am able to successfully flowify other shapes , i am still not able to do for triangle pattern. I am able to impose grid though ( So i assume my grouping is right). I dont get any error msg and on zooming out the mode; enlarges in scale without patterns flowifyied. Pls help

@nanettasztanko2392 6 жыл бұрын

very good video! great help!

@Thesketchupessentials 6 жыл бұрын

Thanks Nanetta!

@richardstiers9010 8 ай бұрын

Great video! Will download at once. However, can Floify also project onto a sphere? Not just a cylinder?

@ejsarmiento5891 6 жыл бұрын

AWSOME!!!

@adilnawaz4714 3 жыл бұрын

"This name ny this person " 😂😂😂 that was cute. But really amazing work. I watch every video from you. You ate legend.

@vicarioustube 2 жыл бұрын

Hi, does it matter if the path lines going down are not vertical, but going inwards symmetrically. My curved object is deeper so the curve is stronger. Thank you.

@user-lr7yj1qn2c 4 жыл бұрын

Hi justin , i think it would be brtter to have more video about flowify to understand well

@melom26able 5 жыл бұрын

well, till 10 mins ago I wasn't able to use it!!! thanks again!!

@Thesketchupessentials 5 жыл бұрын

Awesome - glad you got it running!

@anna-sophiameyer8891 4 жыл бұрын

Hi :) do you have an idea what to do if the polygon is to big and sketch up is crashing?

@sangwanqrduangkaew6670 6 жыл бұрын

Thank you!

@Thesketchupessentials 6 жыл бұрын

😀

@onzkicg 7 жыл бұрын

Awesome!

@Thesketchupessentials 7 жыл бұрын

Thanks!

@kamolkornchapoopoung8597 10 ай бұрын

Thank

@dindodayrit4958 5 жыл бұрын

GREAT VIDEO THANKS GOD BLESS

@Thesketchupessentials 5 жыл бұрын

THANKS

@caljucotcas 4 жыл бұрын

Thanks!

@Thesketchupessentials 4 жыл бұрын

No problem!

@abbasramadan468 4 жыл бұрын

Does this work with spheres?

@yankeeboys2009 Жыл бұрын

perfect

@silverrosen 5 жыл бұрын

Thank you very much for this! this is the first tutorial I'm getting it to work with! Now, if I could only figure out what I'm doing wrong with what I want it for...

@Thesketchupessentials 5 жыл бұрын

Well, getting the extension to do something is always the first step! :)

@silverrosen 5 жыл бұрын

@@Thesketchupessentials Indeed! I did eventually figure out what it was, I had a too sharp curve on my object so Sketchup registered it as two entities instead of segments, the moment I made the curve a bit smoother everything worked perfectly!

@Thesketchupessentials 5 жыл бұрын

Awesome!

@abid3050 7 жыл бұрын

thanks man

@Thesketchupessentials 6 жыл бұрын

Thanks for watching!

@Cyberdactyl 3 жыл бұрын

One issue I was having is I was making a group of the ENTIRE arch, meaning the sides. Which were three items and it wasn't working. ONLY the face of the arch is made into a group.

@MrSaintnani 6 жыл бұрын

THANKS

@Thesketchupessentials 6 жыл бұрын

Thanks for watching!

@MrDrourou 6 жыл бұрын

Greaaaaaaaaaat thank youuuuuuuuuuuuuu.....

@Thesketchupessentials 6 жыл бұрын

Glad you liked it!

@masood6086 3 жыл бұрын

thanks for share

@Thesketchupessentials 3 жыл бұрын

Thanks for the visit!

@hexikkeksik1662 4 жыл бұрын

how to do this around a sphere ?

@keylafazani2975 Жыл бұрын

Can you show how to make a round pathway, with a ramp on top that goes up and down? I am struggling a lot :(

@salestransformationservice6202 4 жыл бұрын

VERY nice .. Thanks for the info. I am new to Sketch-up and intend to use it to design wooden furniture pieces. I was wondering f there is a way to come up with a bill of material (list of components that make up the final object). Is this feature available in SU? if not, what is the closest to this? thanks again

@Thesketchupessentials 4 жыл бұрын

It would require you to set up your model in a very specific way using groups and components

@faresjawad3096 7 жыл бұрын

coool , and i have a question how to import a 3d Autocad model into sketchup .I model everything in sketchup put i received Autocad model from a vendor and I wanna adjust it in sketchup , thxx

@Thesketchupessentials 7 жыл бұрын

I believe CAD import and export are a pro feature - more info here - help.sketchup.com/sv/article/3000165 - I haven't done a ton with CAD files in SketchUp - thanks for watching!

@gsmarcom 7 жыл бұрын

Hi, I hv a question about performing a similar task like this, but instead of having the pattern laying on top, can you make it cut into (engraved) the curved face?

@Thesketchupessentials 7 жыл бұрын

That's an interesting question. Probably the easiest way to do that would be to model it above as if it was already engraved on the face, then bend that along the curve. Does that make sense?

@21Liberdade 4 жыл бұрын

Would this be a suitable tool to bend objects or patterns around less curved shapes? Say for example, using a 12 side polygon that will serve as your base bending face.

@Thesketchupessentials 4 жыл бұрын

As long as they have 4 corners

@idiearon32 7 жыл бұрын

Cool

@Thesketchupessentials 7 жыл бұрын

Thanks!

@Sketchup_Tutorial 6 жыл бұрын

Great Tutorial, Thanks.... My question is: what does mean (Reverse Faces)? and that you did in minute 3:59

@Thesketchupessentials 6 жыл бұрын

Every face in SketchUp has a front face and a back face - by default the front faces are white, and the back faces are gray. It's generally good modeling practice to always have your front face facing outward, otherwise you can get some weird results in rendering programs, etc. Did that help?

@jaredfife4817 6 жыл бұрын

I grouped all the three individual groups together and click on "Flowify" and I get a " Not enough imput" Error...How do I fix this ?

@Thesketchupessentials 6 жыл бұрын

Generally this error means you don't have your grouping set up properly, or your target shape doesn't have 4 corners...

@huanxihe8551 7 жыл бұрын

有没有人可以推荐一个中文的学习平台？

@robby152 4 жыл бұрын

nice tutorial... hey, I have a question, can you help me? I have a pattern, and I want to add the pattern into a lamp shade, how could I do that? Thanks a lot

@Thesketchupessentials 4 жыл бұрын

Depends on the pattern

@robby152 4 жыл бұрын

@@Thesketchupessentials 3d pattern

@ocivdelos2335 4 жыл бұрын

how do you increase subdivision on impose grid, i need more smoother surface. thanks

@Thesketchupessentials 4 жыл бұрын

I'm not aware of a way to do this

@ocivdelos2335 4 жыл бұрын

@@Thesketchupessentials Hi Justin, i got it. the subdivision depends on the segment of the arch created.

@acquireprojects2715 4 жыл бұрын

In my sketchup file ,there is no flowify extension command shown. what can i do?

@Thesketchupessentials 4 жыл бұрын

Install the extension

@HergerTheJoyous 4 жыл бұрын

No matter what I try I can't get it to be impose a grid on the rectangle. They are all separately grouped. I don't know how to make this work?

@Thesketchupessentials 4 жыл бұрын

Either your grouping is wrong, or your target group doesn't have four corners. Go back and check your grouping again

@HergerTheJoyous 4 жыл бұрын

@@Thesketchupessentials I tried again but no luck. Thanks for the tip though.

@arslankhalid614 7 жыл бұрын

how i can download this extension ?

@Thesketchupessentials 7 жыл бұрын

The link should be in the video description below. Thanks!

@pistreemmanuel 7 жыл бұрын

Go Justin your French cannot be worse than my English thanks again for all the advice

@Thesketchupessentials 7 жыл бұрын

Haha - I think you'd be surprised! :) Thanks for watching!

@paulhiso3420 4 жыл бұрын

impose grid not working

@manavahuja4526 4 жыл бұрын

While sending the command the error shows up saying that the source geometry group must contain raw faces.. what should i do?

@Thesketchupessentials 4 жыл бұрын

Your grouping is wrong and your source geometry group has a group inside of it. It can ONLY contain raw geometry

@manavahuja4526 4 жыл бұрын

@@Thesketchupessentials oh okay. thank youu so much

@muftisameer8448 2 жыл бұрын

NICE DEAR..! I WANT TO LEARN V-RAY FOR SKETCHUP(RENDERING) PLEASE RECOMMEND ME SOME BEST CHANNEL FOR ME. THANKS #WAITING....

@Xatriaful 3 жыл бұрын

i followed the same process and it never works out. tried all the solutions in the comments! group, smothed, remade..how can i make it work?

@Thesketchupessentials 3 жыл бұрын

"It doesn't work" isn't enough information for me to figure out what's not working

@Xatriaful 3 жыл бұрын

@@Thesketchupessentials I figured it out. I had to delete the plane base of the semi-circle and only left the curve. And it worked!

@nikhilpatel5875 5 жыл бұрын

Doing same but this error comes. INPUT ERROR : Not enough input

@Thesketchupessentials 5 жыл бұрын

Check your grouping - your groups aren't set up right

@nikhilpatel5875 5 жыл бұрын

@@Thesketchupessentials Sure, I will check

@Din258 6 жыл бұрын

input error ?

@Thesketchupessentials 6 жыл бұрын

Usually means that your groups aren't set up properly

@karthigadevarajan2399 Жыл бұрын

i couldn't do it right impose grid doesn't produce grid on my top rectangular face

@karthigadevarajan2399 Жыл бұрын

yeah i did it !!😁

@dianagutierrezrossell4902 Жыл бұрын

@@karthigadevarajan2399how!?

@florenciocatubigjr9729 3 жыл бұрын

i follow ur tuturial.its doesn't work....

@Thesketchupessentials 3 жыл бұрын

This isn't nearly enough information for me to help you

@namle-jj8fj 5 жыл бұрын

you say too much and make it too fast at important point

@Thesketchupessentials 5 жыл бұрын

Some people tell me I'm too fast, some tell me I'm too slow