Bending Tubing On Brass Instruments

No video

Bending Tubing On Brass Instruments

Рет қаралды 8,114

3 жыл бұрын

This video is about how to bend tubing for brass instruments.
Most people should not try doing this, but you can watch the video and enjoy watching how it is done. Only try doing this if you are an experienced brass repair technician
Do you want to leave a tip so Art can continue to make more quality videos?
TIP JAR - paypal.me/brassandwoodwindsho...

Пікірлер: 26

@bruhsoundeffect8455 3 жыл бұрын

I can’t wait for the mini baritone videos lolol

@1090yoyo 3 жыл бұрын

Nice new torch ;) thanks for the video. The only tube I had to bend, I used cerrobend (Woods metal). I suppose pitch works similarly but for some reason it's nearly impossible to find in France (ans for what I know, cerrobend is way less smelly) the mini baritone project is promising, can't wait !

@theosmith2214 3 жыл бұрын

Can you do a video on soldering on different plated Instruments like nickel and silver? Also have you ever used woods metal instead of pitch?

@israelsa899 3 жыл бұрын

Genial!

@palletcolorato 3 жыл бұрын

Interesting.

@maj.wm.keithwatson8430 3 жыл бұрын

I’ve also seen sand used as a filler.

@kallekarlitos 3 ай бұрын

Hi there. Thanx a lot for wonderfull vudeos and a lot of informacion. One question. Do you know if the pitch is the same as juwelers calls chasers pitch? Here in spain it seems imposible to get, but meaby on the internet. All the best.

@coldiceEVO Жыл бұрын

would ice and wax work as the filling?

@vitodenora5387 9 ай бұрын

Hi,...how take off pitch by tube After bending? 1) heating again to remove the big part of pitch....ok But how to remove the pitch that remain in the tube After heating....?

@paix2669 3 жыл бұрын

Hi man, other video idea, how do you unstain a clarinet to reveal the beaUtiful grenadilla wood underneath? What do I use, what to do step by step. THANKS☺

@TheBrassandWoodwindShop 3 жыл бұрын

I will try to do this in the near future.

@iainsimpson6174 3 жыл бұрын

How easy is it to clean the pitch from the inside of the tube, and do you remove all the pitch from the inside

@TheBrassandWoodwindShop 3 жыл бұрын

The vast majority of the pitch drips or burns out when you heat it up. Most of what is left is soot from the fire. If you wash it out and use a brush on the inside, it will almost all be gone.

@williamhitzemaniii4564 Жыл бұрын

where can I buy french horn lead pipe. One of the places I tried only sells to instrument repair ships. Haven't found any other sources yet.

@TheBrassandWoodwindShop Жыл бұрын

If you know what leadpipe you need, you can go to a music store and see if they can order one for you. You can also keep looking on ebay or reverb.

@musikserviceatzlog3893 3 жыл бұрын

Where do i get this pitch??

@TheBrassandWoodwindShop 3 жыл бұрын

I get it from the pitch filled tubes that I get from Allied. I do not know if Ferree's Tools sells it. Also, one of my viewers said that Cerrobend works. I am not familiar with this, but you can check it out.

@daniellopezgandolfo5217 2 жыл бұрын

Where Can I buy the pieces of pitch?

@TheBrassandWoodwindShop 2 жыл бұрын

I save mine that I get from the pitch filled leadpipes, but most people do not have access to those. Look at the other comments that people left. I think there are some suggestions for where you can get some.

@javierquesada798 3 жыл бұрын

By flute I mean the distance of the keys from the holes of the flute

@TheBrassandWoodwindShop 3 жыл бұрын

Here is the link to a video that will answer that question. "Flute Pad Height: How Far Should the Keys Open?" kzfaq.info/get/bejne/n9CVY6d1u8m4iGg.html I hope this helps, Art

@AngelBalancan 3 жыл бұрын

what material is thath!? can you spell it please? and thank you a lot from México

@TheBrassandWoodwindShop 3 жыл бұрын

It is pitch. It is a lot like tar. It smells like a newly paved road. I am sorry, I know some Spanish, but I do not know the translation for it.

@AngelBalancan 3 жыл бұрын

@@TheBrassandWoodwindShop thank you a lot!! I'll search for it. Im an amateur tecnitian and is knd of hard to achive specialized tool here in Mexico. Many times I handcrafted it all

@israelsa899 3 жыл бұрын

@@TheBrassandWoodwindShop Pitch (Chapopote in spanish)

@vicentejacuinde9484 Жыл бұрын

Es brea