The perfect combination of personality and knowledge. KZfaq providing a platform for a truck mechanic who otherwise would have been unknown to the world. This guy will have people who don’t care about trucks following the pointer!
@2dogsmowing Жыл бұрын
Well said. I wouldn't get any work done around this guy. Because I see him holding this pointer everytime he's talking to someone. Especially to make a point in his conversation. I would be dieing from laugher watch the "bob" the pointer. Lol
@billynomates920 Жыл бұрын
yep.
@leekazan556 Жыл бұрын
So true. It’s the combination of his personality, his expert knowledge of repairing bent frames that we would otherwise think of scrapping, and of course the finger pointer!
@fastinradfordable Жыл бұрын
“Unknown to The world” Bruh people probably travel hundreds of Miles to find this guy
@ryane6719 Жыл бұрын
@@fastinradfordable haha truth.
@technicality718 Жыл бұрын
You can always count on Bob to dish out a few good pointers.
@scottyp1303 Жыл бұрын
Good of you to point that out 🤠
@cameronduff884 Жыл бұрын
...I think we get the POINT, now SIT ON IT...(just kidding)
@sicsempertyrannis4104 Жыл бұрын
Thanks for Straightening us out 🤘🏼😂👍
@lmj420 Жыл бұрын
PoinTdexter!
@snag56 Жыл бұрын
As a young and learning diesel mechanic I have learned so much from your videos. Thank you for explaining the way you do 🤟
@scottyp1303 Жыл бұрын
Good of you to 👉 that out.
@user-dc5ql3jf7j Жыл бұрын
This channel is sure to blow up Bob is the youtuber that truck drivers have been waiting for 🤠
@somewhereinagalaxyfarfaraway Жыл бұрын
I mean that's why I'm here. Learned a few things already for sure.
@darwindodge6260 Жыл бұрын
A good tip to point out When replacing springs you need to look for a matched set Some springs come with a + or a - painted on them That is indicating that they have been matched to each other The only time I got bit by that snake We changed one side owner didn't want to do both He came back later to get the other We ended up with a plus and a minus spring It caused a lean
@ronfullerton316210 ай бұрын
With the old lead springs, it was really a dumb move not to change springs out as a set. We had a new supposedly mechanic, and he only had the side fixed that had broken leaves. There was a spring shop nearby that rebuilt springs, and they replaced not only a broken leaf, but several that had lost the proper arch. We sat the two springs side by side to show him both needed repaired, and the difference in arch was unbelievable. Nope, he wouldn't have the other spring repaired. And of course, it sat leaned over empty. And the lean got worse when loaded. Good look when you want to meet DOT Enforcers.
@markhuyette85092 ай бұрын
Glad to see you had a vacation as hard as you work you deserve one have a blessed day today 🙏
@andrewjoyce7789 Жыл бұрын
Bob's a good name for Bob....
@mikeupton5406 Жыл бұрын
Bob is a Rockstar. Informational Bob.
@Jdub65807 күн бұрын
Boy that re-rail looks like a fun job!
@AGreedyTree Жыл бұрын
I feel like the truck at 2:13 has a better suspension setup than my Freightliner Cascadia because the axles are underneath the leaf springs. I don't like the idea of having all the weight being only supported by the u-bolts.
@subzeromjc Жыл бұрын
Best of luck in the new shop.
@0dbm Жыл бұрын
Bendon for President !!
@paulcoulter7181 Жыл бұрын
Bob is your number 1 employee!!
@raymooney65066 ай бұрын
Thank you for a very informative video Please let Bob rest he's probably really tired n need a beer after all that action
@jimkoonce6574 Жыл бұрын
Just because the tires are marked the same size, you can get different circumference from one brand to another!
@cameronduff884 Жыл бұрын
...I've always wondered about that, but our tire caliper stays locked away from the lowly tire filter for some reason...
@nicholassmith2466 Жыл бұрын
Heck yea love every video full of information every time .. keep on rockin brother
@craigmayo315 Жыл бұрын
Love the videos! Thank you for all the information!
@Thedavidsavage Жыл бұрын
Hi Bob 👋
@josephrasberry3850 Жыл бұрын
Cool dude thanks for teaching us
@loganwill-ut2ge Жыл бұрын
Yes sir hats off to you had 3 trucks during my 2 million mile adventures didnt know those repairs could be 3 truck payments my eq took good care of me may God bless
@diesel7495 Жыл бұрын
Yay Bob! Lol
@CrosstownExpress Жыл бұрын
If there's one thing I've learned in the trades it's 9 times out of 10 the dude with long hair knows what he's talking about and you should probably listen to him
@joeymortenson58276 ай бұрын
Great video Bobs the best for pointing out the troubled areas.
@andyg2591 Жыл бұрын
Bob is correct. I own a old freightliner flc 120 that leaned like hell since I bought it the bushings on the steer axle passenger side destroyed, new hangers, springs, pins etc truck has zero.
@LuciferElExpressTrust-lm8ys4 ай бұрын
Is it ok to drive?
@shawnbirt4161 Жыл бұрын
Thanks for your videos, incredibly helpful for people to understand what forces big trucks are under and how complex it can be to straighten them back out. Not many folks can do what you do it's a lost art!!
@squirrelydan4885 Жыл бұрын
Love the vids keep up the good work
@justbe4481 Жыл бұрын
Thanks for the schooling bro
@robertdees21507 ай бұрын
I'm sure that someone not letting you and Bob fix is there somewhere. Great job as always with your video and may you and your family have a happy and safe New Year.
@TheyForcedMyHandLE Жыл бұрын
Frame replacement video would be interesting. Maybe you already have a vid on that, but heck, if that's the case, make another!
@FlatThunder Жыл бұрын
Thanks Bob! 🤣 Any information on left to right leveling valves and how they work? Fun informational video 👍😁
@michaelmackey754 Жыл бұрын
Great video
@bendinwithbendon Жыл бұрын
Thank you
@kingjames72733 ай бұрын
Sometimes a driver will ditch a truck and never tell you..😅😅😅😅
@invisibilianone628810 ай бұрын
And reason # 0,,,,, Your wife/GF passenger, ate too many cookies😜
@2009KVFD976 Жыл бұрын
I worked at a truck shop a few years back and saw a truck come in with the cab leaning to one side.. turns out it was the torque arm that was broke on the rear axle to frame. Alot of dirty words later, it was fixed.
@2009KVFD976 Жыл бұрын
It was on a 2016 Freightliner Cascadia
@jenette169 ай бұрын
Love your videos
@davidpawson7393 Жыл бұрын
A 15 degree lean. Thanks Bob
@davetylutki Жыл бұрын
great video benden
@frmula1fan5110 күн бұрын
Reason 6: it's gangsta
@keithingram3428 Жыл бұрын
Good video usually common sense tells us what to look for but u look like u been doing this for a while like me but in the younger generation coming in behind me it seems like common sense is not so common 😂😂
@stevefortin7504 Жыл бұрын
Can you do a segment on how to properly check bushings and spring hangars?
@eVamlite Жыл бұрын
Good info Bendon
@jagmanpreetsingh8773 Жыл бұрын
Good information
@brandoncherry1651 Жыл бұрын
D00d be slepin on straightin axles😂
@craigcullen4171 Жыл бұрын
Brilliant !
@Jimmythefish577 Жыл бұрын
Bob is cool!
@jerrykinnin7941 Жыл бұрын
I run tri axle dump chassis by PRATT. They run mono spring. It's just one spring per axle per side. When they brake they literally SNAP at the axle. NEVER DEAD SPIN A LOADED TRIAXLE 20ft chassis with the axles stretched. But man they ride GREAT with 50000 in the box.
@jamisontankersley8718 Жыл бұрын
Paul the pointer
@Kimscrochetandknits10 ай бұрын
It's Peter pointer 😂😂😂 Bob works
@csoacomputers Жыл бұрын
so cool dude.....
@CatRPlrC16 Жыл бұрын
Reason 6: You Reason 7: Your wife "Two Ton Toni"
@HeyDude93gtАй бұрын
I was always told, Left leaning, Fat driver. Right leaning, Fat passenger
@jeffreykreft54425 ай бұрын
This may be a dumb question, but I do not know ok. Do they actually do frame rail replacements? Seems that would cost more than the truck is worth, I mean I can't imagine the amount of labor involved to replace an entire side rail.
@moondogdieselworks3883 Жыл бұрын
You are awesome man. Need more knowledgeable people like you.
@clayton75967 ай бұрын
Bendon ,what about a box truck with air suspension at rear ,the shocks too can be a suspect of the rear leaning ?
@jamesblinzler742110 ай бұрын
My trash truck leans a bit. Never been crashed or abused? I’m gonna have to measure it now. I know it just has rubber blocks for suspension in the back. It’s a 10 wheeler.
@jacobalegria2323 Жыл бұрын
Had a truck go up in flames, burned the entire rear end. caused a lot of damage, bushings, airbags, air lines, harnesses etc. My question is, is the frame compromised? Will it ever be as strong as it was?
@j.r.790711 ай бұрын
Is this Bobs first video
@user-ln7of9gs4s Жыл бұрын
Bendon, what does it mean when you’re in the left lane and the truck pulls to the left? Or being in the right lane and pulling to the right? Tandem axle tractor aligned twice in a row, the second time to confirm the first alignment was correct. Before and after symptoms were the same, it pulled to the right and the front right steer had accelerated wear across the entire tread, in comparison to the left steer which was an identical tire replaced at the same time. There was difficulty per tech to get front right steer in spec. Thanks, love the vids!
@TwoAcresandaMule11 ай бұрын
Was this the birth of "bob"s name?
@jerrybigrig9475 Жыл бұрын
😎👍😎
@PuddinJr1993 Жыл бұрын
I have no reason to know this. But here I am. 🤣 Hello other algorithm wanderers
@wqdeqwe Жыл бұрын
king of New York Christopher walken s lost son if he were a trans port truck mechanic 18 wheel er mechanic
@eddiepacheco7885 Жыл бұрын
Hey there bendon. Quick question is it normal for classics to have lean to the drivers side on the front axle? Ive spoken with other classic owners and they’ve all said its normal. Its had it before i had new kingpins and front end work done plus alignment. TIA like the vids on tiktok 👍🏻👍🏻
@willf5768 Жыл бұрын
😊👍
@michealwilliams1274 Жыл бұрын
Hey do you have the alignment tool for Volvo’s and Mac if so can we get the part number
@steeltentadventures3918 Жыл бұрын
Where is the middle finger pointer, you should have no more than 3
@that_shadow6959 Жыл бұрын
how old is this channel and why so few subs?
@shiningstaer Жыл бұрын
This is gonna be a quality video
@badgerpa9 Жыл бұрын
Also if you are over 400 pounds it can cause a lean.
@sergioalfaro4803 Жыл бұрын
Do you know what can cause leaf spring to to not be centered with hanger bushings? My 2011 cascadia has that problem. Bushings are all good leafs are good theyre all just not centered with hangar bushing
@sergioalfaro4803 Жыл бұрын
No air bag lean either , just wanted to mention😅
@invisibilianone628810 ай бұрын
Is the one spring squared with the axle? Measure distance between front of springs and rear of springs. Can also use a carpenters framing square, ( large on, not the little one) The one spring may have been secured to axle with spring not positioned straight.on axle.
@thebaycuddy Жыл бұрын
Is single frame better than double frame when it comes to frames getting damaged over time
@michaelbundy3506 Жыл бұрын
My 99 volvo leans. Can I bring it to you to fix?
@kayinthepursuitofhappiness2159 Жыл бұрын
Where are you located?
@kuljitdhaliwal14909 ай бұрын
Where is your shop can you send me address my truck driver side leaning I go to many shop but no one fix when any curv driver side they leaning to much
@jayusher576 Жыл бұрын
And one more it could be the lard bucket in the driver's seat...🤤
@cameronduff884 Жыл бұрын
...ha ha, the left front tire of a school bus always wears out before the right front, but that never stops a Chad from taking a cheap shot at a Karen.....