Benefits of UTV Gear Reduction and Why its Better Than a Clutch kit

  Рет қаралды 18,339

Deranged Off-Road

Deranged Off-Road

2 жыл бұрын

If you’re swapping the stock tires and going bigger or want better low end for slow and low Rock crawling, getting a gearing reduction can help you keep the speed you want or help you do that low and slow rock crawling. In this video, our friend Scott from Project UTV shares with us some of the benefits of getting a gear reduction done and why it is a much better option than just adding a clutch kit.
If you live in Utah and are considering getting a gear reduction done, reach out to Scott on Facebook and he'll get you set up!
Contact: / scott.kartchner.1
WAYS TO SUPPORT OUR CHANNEL
Buy parts from Rocky Mountain ATV MC: tinyurl.com/derangedrockymoun...
Subscribe
Buy parts, accessories, and apparel at: derangedoffroad.com/
Become a Patreon supporter: / derangedoffroad
Connect with us on Social Media:
* Facebook: / derangedoffroad1
* Instagram: / deranged.off.road
* TikTok: / derangedoffroad
Contact us: info@derangedoffroad.com
#polaris #proxp #offroad

Пікірлер: 59
@winstonsmith8898
@winstonsmith8898 Жыл бұрын
This is a video that should be mandatory for all UTV owners.👍
@offroaddiaries
@offroaddiaries 2 жыл бұрын
Scott is the man! He gave me some great pointers in my trans rebuild. He's for sure a guru in the gear reduction world! And also someone I consider a friend.
@TheClifford78
@TheClifford78 2 жыл бұрын
Most informative video I’ve watched!
@NelsonSam
@NelsonSam 2 жыл бұрын
Great video! Lots of good info.
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Thanks 👍
@kiloknox
@kiloknox 2 жыл бұрын
what state do u live in. i need a Scott to look at my turbo s. great vid thanks alot
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Utah
@razorsedgeadventures6599
@razorsedgeadventures6599 2 жыл бұрын
Great info! So my 21 RZR XP 1000 Trails and Rocks edition came with a 50% gear reduction in low range and 30” tires. Does this factory gear reduction mean it’s safer for me to bump to a 32” tire without adding undue stress on the drive train?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
You should have no issues running 32’s. -Garrett
@peterkueffner747
@peterkueffner747 2 жыл бұрын
Great video! What is roughly the cost of the kit and labor to put in?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Depending on what you go with, around $900 to $1300.
@1fastc14
@1fastc14 2 жыл бұрын
Do you have a link to buy the 16% gear reduction for the pro xp?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
No we don't. Scott who did it ordered all the parts. His contact info is in the video description. -Dave
@peachpole
@peachpole 2 жыл бұрын
I’d be curious to know exactly what gear sets he is using. I’ve been researching this for a while for my Pro and trying to decide if i want to gear down or not for 32s. It seems pretty happy on hard pack but feels like a total slug in the sand even after dropping tire pressure to as low as 7psi.
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
The gear set is from RCR, but you can reach out to Scott. His info is in the description below. 👍 -Garrett
@samkiepprien3858
@samkiepprien3858 7 ай бұрын
I'm not out West. Do you have any recommendations on where I can take my machine to have gear reduction done to Turbo S. Plan on running 35s, and carry gear tools. The 60% in low I think is what I want too.
@DerangedOffRoad
@DerangedOffRoad 7 ай бұрын
Hopefully any UTV shop should be able to do it.
@copisetic1104
@copisetic1104 2 жыл бұрын
The Kawasaki’s already have lower gearing, and wet clutch for smooth takeoffs
@palisicky
@palisicky 2 жыл бұрын
I desperately need an answer that even polaris themselves can’t answer! I have a 2018 570 utility that comes with a factory gear reduction, i know i go about 10 mp/h less than a normal model but i dont seem to have more acceleration? What tire size could i put on to be about like the normal ones i have 25 tires how higher could i go without going to far
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
With a 570, probably 28s would be the max size in my opinion.
@wideopen9791
@wideopen9791 5 ай бұрын
2023 can am defender lonestar come with 30 inch tire stock size planning to put 35 inch do you think 20 % gear reduction is good i only do trail riding no mudding or rock climbing…
@DerangedOffRoad
@DerangedOffRoad 5 ай бұрын
Yes, it would be great for that setup while not losing too much on the top end.
@jesse1441
@jesse1441 2 жыл бұрын
What size and brand tires on on the rzr in the background?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
The new chicanes. I believe they’re 35’s. -Joe
@jesse1441
@jesse1441 2 жыл бұрын
@@DerangedOffRoad thanks they look really good on that machine
@ChristopherMCross
@ChristopherMCross 2 жыл бұрын
Are you doing the gear reduction due to the 32s?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
We did it mostly due to the use this machine is going to get. It will spend a lot of time in the rocks and we’ll probably eventually go bigger than 32” tires . Plus we wanted to be sure that the trans was properly aligned with the engine so we can have the best possible belt life. -Dave
@CraYzJake1
@CraYzJake1 2 жыл бұрын
which gear reduction kit did you guys get installed?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Scott did all the ordering and install. You can reach out to him. His info is in the description but it was the gears from RCR not factory. -Garrett
@azrzr5440
@azrzr5440 2 жыл бұрын
What kinda top end are people doing with gear reduction
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Really it stays about the same you will just get there sooner and a little higher rpm.
@TexasPatriotOffRoadAndOutdoors
@TexasPatriotOffRoadAndOutdoors 2 жыл бұрын
Garrett, does anyone make a gear reduction for the KRX?
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Not that I know of, but at the same time the KRX is geared pretty low so that’s probably why most just mess with the clutches on them. -Garrett
@TexasPatriotOffRoadAndOutdoors
@TexasPatriotOffRoadAndOutdoors 2 жыл бұрын
@@DerangedOffRoad I agree on the low gearing. Was just wondering because I’ve seen a few of them in south (mud parks) have portals installed.
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Yeah that’s what they use to gear them lower. -Garrett
@petebolognese8488
@petebolognese8488 2 жыл бұрын
what if you put on 4in portal with a 15% gear reduction ? do you also do the rear end
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
You can depending on how much you want to go down. -Garrett
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
The great thing about a gear reduction is it is more customizable. You can gear low and high individually where with portals you are essentially doing a 15% across the board. Not to mention portals are big money compared to what we did. -Dave
@petebolognese8488
@petebolognese8488 2 жыл бұрын
Want to lift a 2022 4 seat general 4 in and some 32 tires ,so was thinking of portals.is a lift and a gear reduction better idea
@shmag4216
@shmag4216 Жыл бұрын
I ordered Stage 2 and 3 gear reduction. Should I not install the clutch kit?
@DerangedOffRoad
@DerangedOffRoad Жыл бұрын
We never did.
@1gr8oil
@1gr8oil 2 жыл бұрын
SO what about the front end gear ratio when you get into 4 wheel drive and the front and rear locked together!
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
From Scott: The driveline connects to the transmission so the front diff will always spin the same speed as the trans no matter how you gear it. Think of basically that the transmission acts as the rear differential, and transfer case all in one. 👍-Garrett
@1gr8oil
@1gr8oil 2 жыл бұрын
@@DerangedOffRoad So it isn't like a 4-wheel drive truck! Thanks Garrett
@TexasPatriotOffRoadAndOutdoors
@TexasPatriotOffRoadAndOutdoors 2 жыл бұрын
@@DerangedOffRoad Garrett, I may be wrong but I think what Wayne Owen is saying is that it seems with the current set up the following will occur: Although the trans output will spin the front drive shaft the same as the rear, once power goes through the pinion and ring ratio, the output at the axles/tires will be different. I hope I made sense what I said…
@deeadams1367
@deeadams1367 2 жыл бұрын
Please help me get ahold of Scott. Thx. I don’t know how to do Facebook. Dee
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
You can call Moto Armor in Utah and ask for him. 👍
@skeim5620
@skeim5620 2 жыл бұрын
What wheels are on there and size
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Methods 15x7 with 32’s 👍
@skeim5620
@skeim5620 2 жыл бұрын
@@DerangedOffRoad what’s the offset
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
4x3
@mikelewallen5917
@mikelewallen5917 2 жыл бұрын
How much does that cost
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
The upgraded gears we went with was about $1200. That could have all changed since this was a bit back.
@mikelewallen5917
@mikelewallen5917 2 жыл бұрын
Thanks..what gears did you go with
@DerangedOffRoad
@DerangedOffRoad 2 жыл бұрын
Not sure on brand because Scott put them in for us. It’s was a 46% low and 16% high reduction I believe.
@mikelewallen5917
@mikelewallen5917 2 жыл бұрын
Thank you sir
@bobvalenz4938
@bobvalenz4938 2 жыл бұрын
This guy is not cheap just look at where this guy lives Damn
@jeremypreston1593
@jeremypreston1593 Жыл бұрын
Actually he was the cheapest quote for me on a gear reduction. Scott's the man.
@DUNEATV
@DUNEATV 2 жыл бұрын
Nice video…but I think a lot of this was Dave’s point in your last video!
UTV Clutching 101: Everything You Need to Know and More!
6:39
Vivid Racing Off Road
Рет қаралды 228 М.
10 Reasons Why Your Polaris RZR Belt Fails
17:02
Hunterworks Inc.
Рет қаралды 358 М.
Sigma girl and soap bubbles by Secret Vlog
00:37
Secret Vlog
Рет қаралды 12 МЛН
🤔Какой Орган самый длинный ? #shorts
00:42
Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House
00:18
123 GO! HOUSE
Рет қаралды 17 МЛН
50 YouTubers Fight For $1,000,000
41:27
MrBeast
Рет қаралды 197 МЛН
HYDRAULIC PRESS VS ARMOR, USA AND RUSSIA
10:16
Crazy Hydraulic Press
Рет қаралды 10 М.
We’re Selling Our Supercharged Kawasaki KRX…But why?
10:58
Deranged Off-Road
Рет қаралды 7 М.
New Budget Friendly UTV Storage Box and Gear
13:17
Deranged Off-Road
Рет қаралды 8 М.
Gear Reduction VS. Clutch kit in a Polaris RZR or Ranger
14:19
Hunterworks Inc.
Рет қаралды 42 М.
CVT Clutch slipping on your RZR? Try this!
20:40
STOKED 2 SHRED
Рет қаралды 62 М.
How To Inspect Your Polaris CVT Clutch
8:25
Rocky Mountain ATV MC
Рет қаралды 519 М.
Why your Polaris RZR/General/Ranger has a Jerky Start!!
4:39
Hunterworks Inc.
Рет қаралды 449 М.
We Ride the Honda Talon R4 at Mid America Outdoor Park
18:29
Deranged Off-Road
Рет қаралды 3 М.
Fast and Furious: New Zealand 🚗
0:29
How Ridiculous
Рет қаралды 2,5 МЛН
профи на Тракторе Т-16
0:24
StellaTwin
Рет қаралды 2,4 МЛН
зил
0:32
Karol tv
Рет қаралды 1,2 МЛН
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19
KINO KAIF
Рет қаралды 9 МЛН
❌👽LAMBORGHINI VS FERRARI | WHO IS FASTER!?💨
0:11
ag_soccer team
Рет қаралды 1,4 МЛН
PRADO 250 - классная машина!
0:28
Тарасов Auto
Рет қаралды 3,5 МЛН