Short, sweet, and to the point.... without a 20 minute lecture on BS just to hear yourself talk. If only everybody would do this!

Thank you very much for your hard work and dedication making these videos. I work at a "Big Box Retailer" and ppl come in expecting is to know everything like an electrician. Guy came in wanting to install a 30 amp receptacle, but had no clue what parts he needed.

Good video shows everything from the electrical panel including the type of wire with conductors and gauge all the way to the type of box to use four gang

Great tutorial ! May be the best, most clear instruction I have ever come across. Thanx alot !!

bravo! someone who knows how to insall a dryer receptacle. dryers & rangers were improperly wire for decades with 3 conductor romex which tied ground & neutral together. so many youtube videos on wiring are scary, this one is o.k.

Panel wiring was beautiful...a good electrician will even make the wiring you'll never see look nice! A pro!

Dryer plugs and stove plugs look the same. But are different. Dryer plug he used the neutral was shaped like an L. That’s your white wire. The stove plug the neutral doesn’t have the L shape. It’s straight. Just to let everyone know the difference

The groud wire does need to be actually hooked up on the 4 prong receptacle. I found this out the hard way. Can't leave them hanging anymore.

Great video. I was going to hire someone, but seeing this video I gain confidence. Thank you. Well done..

Would have been nice to see you hook it up at the breaker

Thank you for this video! I just moved my dryer down to my basement in an older house I just bought. In the process I found that I have to rewire it with new 10-3 instead of using the old 10-2 wire that was originally installed in the house. I was confused with how I needed to connect my 10-3 to the circuit breaker box. This helped me out so much!

Thanks for video but please don't use a ring when your work have a great week

thanx for your time, effort and list/links on this matter

Make sure all screw are vertical!!!!

Hello, Ben! First of all I wanna say thanks for your videos!! Now I would like to know how high should that box be. Could you please tell me?

Thank you,, short and sweet and to the point exactly what I was looking for!!

Orientation for the receptacle to match the plug on the cord? Cord does not come with appliance ?

Most importantly, screws horizontally. 😅 Thanks for a good video!

Thanks. Is there any specific height for the dryer outlet in the basement.

Very good info. Simple

Hi, hoping you can help... All I'm trying to do is hookup a dryer in an older building (1976 condo) and I've added a ground and converted from 3-prong to 4-prong, standard US 30AMP circuit. I've watched like 30 videos and everyone seems to claim 240V is either RED or ORANGE, and showing a FLAT wire. I have a single Romex BLACK, ROUND 10/3 wire (2 white/black hot, 1 ground, and 1 neutral bare wire) coming into a 1-gang old metal box (is this legal?). I am in the US/North American (NJ state). I simply want to move the receptable down lower on the wall out of sight, i.e. extend the Romex a foot or two inside the existing drywall, using up-to-date code and the correct type of cable, connector, and junction box(es). Please explain: 1) Why is my 10/3 a BLACK cable, and round not flat RED or ORANGE? Is this just common in older construction, or was the wrong type of cable used all the way back to the circuit breaker? 2) What is the difference between Romex 10/3 300V vs. Romex 10/3 600V, which are currently the only ones still being sold at Home Depot. No sign of any red or orange 10/3. Are these ROUND BLACK cables still current and OK to use inside drywall (like what appears to be there now), or is that the older style, for outdoor use, or some application? When did they switch from red or orange to black, and flat to round, or vice versa? 3) Does it matter whether I use 300V or 600V? What is the typical application for each? (I've googled till I'm blue in the face...can't find ANY videos talking about this anywhere!!) Is 600V just overkill? What is that typically used for? Would it hurt anything to use 600V in a 300V application (ie either fine for an electric dryer 240 30AMP circuit), or is it bad to use a higher rated voltage wire for any reason? 4) What is the proper size ELECTRICAL / JUNCTION box for a 30AMP Dryer 240V circuit with a METAL BOX (ground screw in box)? Except for yours, 90% of the 4-prong dryer outlets stocked at Home Depot and almost every video on KZfaq seem to show people installing these newer 4-prong dryer outlets into 1-gang boxes. Even the receptable instructions itself claim "Do not install in 1-gang" yet the plate itself is sized for 1 gang (only two screws top and bottom, like on a normal light switch)! What is the code for 240A? 1-gang or 2-gang? Why are the majority of outlets sold with a 1-gang plate if the box is supposed to be 2-gang? 5) What is the code and safety requirements to SPLICE and EXTEND the cable inside existing drywall? I read somewhere code says you can't have a junction box behind drywall. So do I need to actually REMOVE the existing junction box, splice all 4 wires including ground using push-fit or butt connectors to extend the cable inside the drywall, then leave that cable there loose in the wall outside of a junction box, just to relocate a new metal outlet box 2 feet lower with an outlet on it? Is it OK to drywall over the existing spliced section? (This seems a lot more unsafe to me than just leaving the spliced section inside the existing metal junction box, and then extending on down to the next one.) Thanks if you can help. Will vote up the video...because I can't find these basic answers anywhere! Thanks

You didn't hook it up in the breaker box

Great work, Ben! Will you be doing more videos on this topic soon?

why don't we have to ground to the metal box as is common with other wiring of fixtures?

so the ground wire is indicated on the plug outlet and the rest of the wires you just made it neatly and snug?

What about the CB panel hookups?

Wish you had explained why a dryer receptacle (240v) needs a white neutral wire.

Allways the best videos,thanks

Good choice on carpet knife.

Are you supposed to remove the copper strip?

Im moving my dryer to a spot that dont have an outlet. Can i rewire from the regular plug thats 5 ft away. And route the wire to a dryer plug. If that makes sense

What is I don't have a ground wire for condo built in 1987? Should have one but just wondering. We will need to replace the old 3-prong receptacle for an old electric dryer with 4-prong receptacle.

Why does an electric dryer outlet burn /melt with dryer cord. Reasons?

Are ground and neutral bonded or connected on the outlet? So if you did an ohm test they would be connected?

6:32 It’s not color coded so how did you know what wire to put for each screw?

Sorry to ask. but your washer hookup. I see your supply and drain lines aren't connected like most of them are. they are placed on either side of the stud. where did you get those from? I've been looking but cant find them. Also the recessed dryer exhaust too. thanks!

thanks for this video.. well done.,.. very clear!

Explaining the wiring was helping

Just moved to new house and my new dryer chord only is a 3 prong. So I am running 10/3. I bought a 3 prong dryer receptacle. I am using a metal box. Do I ground the ground to the box? Because the receptacle doesn't have a spot for the ground?

Where do the other 2 wires go on the other end you showed 4 wires 0:35

How boyt the breaker box connection

Maybe want to mention 8/3 wire for voltage drop if the dryer is quite a distance from the box like mine but otherwise great

Need the panel box installation too. I was expecting the whole instruction of complete installation.

Can this be done to any outlet? For example the house my wife and I are moving into has gas connector for the dryer. Our dryer that we have in love is electric. If there’s an outlet close by in the laundry room am I able to change it to be for this type of outlet? Thanks

Where do ur wires the white on the breaker ?thanks

How did you run the wire into the wall on the other side of the receptacle?

does the latest NEC codes require a 30 AMP GFCI breaker?

by code, how far does an elec outlet have to be from a water source?

Very good information

Is there a reason for having the ground face up vs down?

thanks.. good info! Helped me out!!

what side wire can i use for light LED CAN YOU MAKE A VIDEO LED LIGHT

Never showed where the neutral went in the panel.

So 2 12-3 wires won't work?

Thanks! This helped a lot

Awesome video, thank you

I wish I could do this!

Thanks it work

nice video thanks

You failed to mention that this circuit is for 240 V/120 V Dryers.

Thanks

how come my dryer outlet only has 3 pins

What would you do for the 3 prong dryer outlet? Is everything the same?

Thank you sir!

I have red white and black wires no neutral

Working with a ring or any jewelry is a no no…. 😮

Your orange cable looks like it already has black white red and ground wires, at what point did your yellow (ground) cable merge into the box. You lost me there

I have only 3 wires

don’t tighten your screws to tight !

95 percent of electrical connections are over torqued...only 7lb/in needed ...just busting chops here haha