Wrecked bike rebuild ZX14 TWIN (PT. 3 TOTAL engine inspection/tune up)

Рет қаралды 7,703

Жыл бұрын

I started to inspect the new ZX14 twin project I got. the bike is actually a Concours 1400, very similar to ZX14 motor with a few exceptions. I bought this project bike for $500 thinking it was a steal, come to find out there was a major issue that I completely overlooked when purchasing. The bike actually had a damaged engine casing from the impact during the wreck. Y’all stay tuned into this wrecked bike rebuild where I inspect the engine and get it tuned up and ready for installation back in the bike!
CARDO Discount code/link
Benjamminoutdoors
cardosystems.rfrl.co/mw3dd
YESWELDER Discount Code -
BENJAMMINOUT
yeswelder.com/discount/BENJAM...
My Amazon list
www.amazon.com/shop/benjammin...

Пікірлер: 40

@CJMediaOfficial Жыл бұрын

I really enjoyed the whole process of the valve checks and engine tune up! I'm eager to learn this stuff

@Benjamminoutdoors Жыл бұрын

Thanks man! Yeah it isn’t too bad!

@karlvanboxel561 Жыл бұрын

I always turn the engine a couple of turns to help seat the shims b4 checking gd job man she’s coming along nice

@EssentialComment Жыл бұрын

yes especially with all that oil that was dumped in, but this was really good anyways

@Benjamminoutdoors Жыл бұрын

Hmm yeah I’ll have to do that next time! Thanks!

@H-M-78 Жыл бұрын

Wife says you sounds like a young Michael Douglas. Great content! 👍

@Benjamminoutdoors Жыл бұрын

Haha nice, thanks!

@andreungerer3531 Жыл бұрын

Btw, the rubber you found was from a plug spanner. It keeps the plug secured in the plug spanner.

@Benjamminoutdoors Жыл бұрын

I don’t think so, it was tight on the walls of the tube unless it some how swelled a lot I don’t think it would fit in a socket or anything like that

@sinn.abdullah Жыл бұрын

Eagerly waiting for this beast to roar again❤️‍🔥

@uriteruel Жыл бұрын

I love the way you work, it's relaxing to see you enjoy and work without needing a rush. Nice project btw 🤟🏻

@Benjamminoutdoors Жыл бұрын

Thanks!

@SanjanaRanasingha Жыл бұрын

Love the series

@miguelcardoso395 Жыл бұрын

Top

@asdfg6528 Жыл бұрын

good job man keep it up

@Benjamminoutdoors Жыл бұрын

Thanks!

@kimbaertasbert7157 Жыл бұрын

Hey, next time mesure all the shims first. You mught be able to interchange shims without having to take new ones. Sometimes the shim you need in on one of your exhaust valves, that you need to change anyways. Just a tip :).

@Benjamminoutdoors Жыл бұрын

That’s exactly what I did! That’s why all the buckets are on my table at the same time.

@schzx14 15 күн бұрын

I think you have a Concours 14 motor based on that vvt. Might be wrong.

@thematrix3431 Жыл бұрын

Ah yes. The ever familiar rage inducing experience of tightening your cams down only for the intake side to slip as the lobes push them whichever way they will after you spent way too long making sure the proper shims were being put in only to realize that you don't have enough of the shim size that you need. 😂😂😂😂😂😂😂😂. It doesn't matter how much I overstock shims. Without fail, when doing valves, the one I have least of is the one the bike is going to need. It's sick and twisted

@Benjamminoutdoors Жыл бұрын

Haha yeah every time

@steveo7767 Жыл бұрын

That rubber piece looks like the inside of a socket for spark plugs. Usually they have a rubber piece in them.

@Benjamminoutdoors Жыл бұрын

Yeah it does but it was too big to fit into any of my spark plug sockets which doesn’t make any sense lol.

@steveo7767 Жыл бұрын

@@Benjamminoutdoors Possibly it was swollen no telling how long it had been in there.

@cullercoatstunneloflove4307 Жыл бұрын

The rubber ring on the spark plug could be from the last person who changed the plugs? I have seen this before when some uses an old spark plug socket and the rubber insert from the socket detaches and remains on the spark plug.

@Benjamminoutdoors Жыл бұрын

Except this doesn’t fit in the socket the OD is too large it was the size of the spark plug hole itself

@cullercoatstunneloflove4307 Жыл бұрын

@@Benjamminoutdoors God knows then? Love your posts. Thanks

@rg2431 Жыл бұрын

Show how you connected stater with battery to turn the engine

@Benjamminoutdoors Жыл бұрын

I just connected a a ground from the battery to the engine block and then a cable from starter positive terminal to the battery positive terminal

@1504strikehold Жыл бұрын

Did you alter or remove or modify the VVT mechanism ? I understand that the ZX-14 does not have that feature?

@Benjamminoutdoors Жыл бұрын

I did not modify it at all, I left at stock because it would require tuning

@giraffeapproved Жыл бұрын

Is it really necessary to put double gasket sealer on? Seems like overkill. Great video none the less!

@Benjamminoutdoors Жыл бұрын

Maybe not, but it guarantees me I won’t have any leaks or seepage of oil. Because it’s a pain to have to drop the motor or remove the valve cover again.

@ryanwilliams5744 Жыл бұрын

Wanted to ask you about a 125r honda its not starting

@Benjamminoutdoors Жыл бұрын

Email me, Benjamminoutdoors@gmail.com

@firasgraiaa1414 Жыл бұрын

Where the gsxr 1000

@Benjamminoutdoors Жыл бұрын

Hopefully putting one out soon

@andreungerer3531 Жыл бұрын

Why is it called Benjamminoutdoors when in fact it is Benworkingindoors?

@EssentialComment Жыл бұрын

maybethatwastaken

@Benjamminoutdoors Жыл бұрын

Lol I coined the name Benjamminoutdoors in high school before KZfaq. I used to fish, scuba dive, ride bikes, and tons of other outdoor activities and but the bike rebuilds did well so I’ve been steady making those videos and not ganna change the name haha.