Bent Lamination Wireless Charging Stand

Рет қаралды 7,005

7 жыл бұрын

I was sick of fumbling around with cords and occasionally having the USB connection not make good contact and fail to charge - so I made this!
Support these videos on Patreon! / chrisdeprisco
Special thanks to DOMINIK LIZAK, James Waples, John Scherer, Jon Einarsson, Daniel Wagner, Tex©, Euan Mutch and Ben Knight for their support!
Music by Approaching Nirvana
/ approachingnirvana
Songs: Reset and Still Lying There
Buy the song on iTunes: bit.ly/R8hVSy

Пікірлер: 46

@brukernavnfettsjit 7 жыл бұрын

Looks very nice! I would have tried to rough out the pattern on the bandsaw, then went straight to the finishing passes on the cnc to save some time.

@ChrisDePrisco 7 жыл бұрын

+Auarhau I tried but it was a tad too tall for the saw. It's ok though, I mowed the yard while it worked. :)

@brukernavnfettsjit 7 жыл бұрын

haha, that's one big advantage of cnc I guess :D

@michaelgimbel4418 7 жыл бұрын

All of your videos are so impressive -- if not in technical talent than in artistry. Thank you for publishing.

@acesofthesky 7 жыл бұрын

Thought this was LTT with that thumbnail, but I got awesome video instead

@IronHeadMachine 7 жыл бұрын

Very cool. I am not a wood guy but need to learn this stuff. Thanks for sharing.

@stancho44 7 жыл бұрын

This is the start of a beautiful channel

@unknownuser31792 7 жыл бұрын

So polished, very nice.

@a1var32 7 жыл бұрын

beautiful video

@AmateurRedneckWorkshop 7 жыл бұрын

Nice charger. Very labor intensive build. Keep on keeping on.

@ChrisDePrisco 7 жыл бұрын

+Amateur Redneck Workshop Thanks!

@limitededition7521 7 жыл бұрын

Great job. You could put the electronic between the layers😉

@ChrisDePrisco 7 жыл бұрын

That would certainly be cool! :)

@johngalt9262 7 жыл бұрын

nice work, as usual :)

@ChrisDePrisco 7 жыл бұрын

Thanks!

@r3vo830 7 жыл бұрын

Amazing.

@sr.fudensio2023 7 жыл бұрын

Perfeito bom trabalho vc coloca os links das peças dessa máquina que vc fabricou

@nowayjerk8064 7 жыл бұрын

very nice , but i see your steal working in that shower;) and why dident you use a short and or a bigger dia end mill for the roughing ?

@ChrisDePrisco 7 жыл бұрын

Lol yea, I'm making progress on that though! I didn't bother cause it's just wood so it's pretty forgiving of dumb ideas. It whined about it a bit but it worked well enough. :)

@fhmcateer 7 жыл бұрын

I would buy something like that. it's awesome

@ChrisDePrisco 7 жыл бұрын

+fhmcateer Thanks! I thought about making them for sale but they would be really expensive unless I had enough demand to "mass produce" them.

@fhmcateer 7 жыл бұрын

Makes sense. Wireless is great these days though but the stands are often plastic which looks a bit clunky

@ChrisDePrisco 7 жыл бұрын

And they all seem to be portrait only! That's why I made my own.

@SvenPHX 7 жыл бұрын

That turned out great. What software chain did you use to create the model and tool paths?

@ChrisDePrisco 7 жыл бұрын

Thanks! I used Fusion 360 for both.

@mchiodox69 7 жыл бұрын

Awesome project. Where did you get the charging electronics?

@ChrisDePrisco 7 жыл бұрын

They are all over ebay. Just look for "three coil qi charger board".

@masterrex1000 7 жыл бұрын

did you get a low amp charger? the more powerful ones can generate lots of heat that may be a fire hazard/ruin your phones battery.

@mchiodox69 7 жыл бұрын

Yes. Thank you. But trying to make the form without a CNC is a tad harder than it looks. At least for me it is!

@ChrisDePrisco 7 жыл бұрын

Yea, I can imagine. I didn't even attempt to do it by hand. :)

@Smileyreal 7 жыл бұрын

Do you still make the fiber laser songs if you do can you Play "Portal - You Wouldn't Know" and "Portal - Don't Say Goodbye" with the fiber laser

@stephenmetsch6316 7 жыл бұрын

Did you build the electronics or dismember a retail product???

@ChrisDePrisco 7 жыл бұрын

You can buy the electronics bare, on ebay.

@boobrowsky 7 жыл бұрын

im not cnc expert at all and it's very hard to understand for me why not to remove somem material before gluing piece? why you need powderize such big amount of plywood?!?

@ChrisDePrisco 7 жыл бұрын

I didn't have a way to do it easily. Anything I would have done would have to have been manual and not only is that a lot more work but there is the chance of screwing something up. The machine doesn't mind the extra work; I went off and did other things while it worked.

@TheMetalButcher 7 жыл бұрын

Still holding out on that bandsaw I see. Wait, what the hell. You do have a wood bandsaw. Whyfore didn't you rough it out on the bandsaw and save your cnc a mile of travel?

@TheMetalButcher 7 жыл бұрын

Fantastic build though.

@ChrisDePrisco 7 жыл бұрын

Cause it was about a half inch too tall. That's why you see the pattern taped to the side of the block; I tired that first! :)

@TheMetalButcher 7 жыл бұрын

That's fair. Time to build a bigger one >:)

@ChrisDePrisco 7 жыл бұрын

It's on the list! :D

@MrAntieMatter 7 жыл бұрын

@Lukas-qy2on 7 жыл бұрын

First view and comment and like!

@TheLiasas 7 жыл бұрын

goddamn that took so long. why not just saw the thing?

@ChrisDePrisco 7 жыл бұрын

I didn't have a way to; the bandsaw can't cut that thick. Besides, it's not like I had to sit there and watch it. I went and did other things - that's the beauty of CNC. :)