No video
BERNINA Edgestitch Feet #10: July 2021 Foot of the month
Рет қаралды 10,845
Күн бұрын
@catherinelavoie2694 3 жыл бұрын
I am going to the machine right now to try it out. Thanks!!!
@Rusticpixel 2 жыл бұрын
Great. Thanks so much. I just purchased the Bernina 480 today and learning.
@alexaelliott2598 3 жыл бұрын
Number 10 is the most useful foot for so many uses. It allows great accuracy.
@cathj8568 3 жыл бұрын
This was so very helpful. U gave grt trouble wth bindings and have tried th 71 foot wth varied success. This seems to be a nice alternative. Thank you
@dianen420 2 жыл бұрын
Great tutorial. Thank you. Have had my 10D foot for a very long time and finally know how to use it for binding.
@DD-ek8qc 2 жыл бұрын
Great demo!
@kristenbjorne8703 Жыл бұрын
Thank you! This tutorial was VERY helpful. I needed your demonstration with this foot to bind a quilt. I will use my new foot soon to do this!
@Ayram9 5 ай бұрын
The problem with the #10 foot on the smaller 5.5mm machines is that the needle can't move far enough away from the guide/edge. So it's super super close to the edge, even when the needle is moved way over all the way, which doesn't look as nice when topstitching binding. 😢
@BERNINAofNaperville 5 ай бұрын
Perhaps your machine needs an adjustment because this is not the case at all.
@Ayram9 5 ай бұрын
@@BERNINAofNapervilleCan you please explain what an adjust menu is? Thanks! And that's great news if this could be fixed!
@BERNINAofNaperville 5 ай бұрын
I don't know what you mean by adjust menu?@@Ayram9
@Ayram9 5 ай бұрын
@@BERNINAofNapervilleSurely you must (feeling slightly gaslit here) as you wrote it before editing it.😆 But I see now that you changed it to "adjustment" and feel like an idiot for googling "Bernina adjust menu."😂 I thought maybe I could go into the menu and adjust the numbers somehow. Too funny. Anyway, the needle can't go over any further and the guide is straight so it's hard to imagine what adjustments might make a difference. But I'll ask about it. I'd show you a picture of two samples but no way to do that here. Thanks!
@BERNINAofNaperville 5 ай бұрын
@@Ayram9 you need to visit a dealer. This is not normal. And there are multiple folks who monitor our social so someone corrected and I was not aware.
@shinningpearl3526 Жыл бұрын
I have Bernina Activa 130 sewing machine but I lost its foot kindly tell me from where I buy it's foot
@BERNINAofNaperville Жыл бұрын
You can purchase from us www.berninaofnaperville.com or call 431-472-4231
@estellastrawn4814 3 жыл бұрын
Thanks!! I was just doing some binding on some placemats… I needed this. Thank you! 🧵✂️🪡
@lindacontois8818 3 жыл бұрын
I have a 770QE and was given a # 10 foot a regular Edgestitch foot, is it OK to use it on my machine?
@BERNINAofNaperville 3 жыл бұрын
Yes, you just will not be able to get the full range of needle positions as you will only have 5.5mm stitch capability.
@amypetiprin8435 3 жыл бұрын
Thanks learned something new. Machine needs oil ?
@BERNINAofNaperville 3 жыл бұрын
Actually the Mike picks the sound of the machine up in a weird way in my sewing room :)
@debramerchant2400 2 жыл бұрын
What is the stitch # for joining the batting?
@BERNINAofNaperville 2 жыл бұрын
That’s the rampart stitch #12 on 4-8 series machines.
@valeriespackman4102 3 жыл бұрын
What kind of scissors are you using?
@BERNINAofNaperville 3 жыл бұрын
These! www.berninaofnaperville.com/products/tula-pink-straight-scissor-6?_pos=22&_sid=69cf60fb1&_ss=r
@valeriespackman4102 3 жыл бұрын
Thanks! I expect with Tula Pink, they’re probably good. I have some other notions of her and I love them!
@lizkimber 3 жыл бұрын
Awww someone slept through your video. Little snores
@arianedruez8618 2 жыл бұрын
Encore en langue de bois
@BERNINAofNaperville 2 жыл бұрын
Excusez-moi, mais je ne comprends pas votre commentaire?
Gina's Bernina Sewing Center
Рет қаралды 10 М.
Poppy Quilt N Sew
Рет қаралды 4 М.