BEST Backpack Clip of 2023 - NOT Peak Design

Рет қаралды 37,801

6 ай бұрын

Switching from the Peak Design Capture Clip to the NEW Falcam Backpack Clip V2. Finally completing my quick release gear kit!
Falcam BackPack Clip V2: geni.us/FalcamBackPackClipV2
F38 Quick Release GOODS: geni.us/DMUlanziF38Quick
---------------------------------------------------------------------------
Aura Frames: on.auraframes.com/3ivNsCi
$30-off Carver Mat frames with code DAVIDMANNING
---------------------------------------------------------------------------
SUPPORT THE CHANNEL WITH MERCH: shopdavidmanning.com
---------------------------------------------------------------------------
MY CAMERA GEAR:
Video Camera - geni.us/DMA7Siii
Photo Camera - geni.us/DMSonyA7IV
Main lens: geni.us/DM16-35
Favorite Lens: geni.us/DM24-70
Long lens: geni.us/DM70-200
NEW Camera Bag: geni.us/DMurbanexplore
Backpack Clip: bit.ly/3jQvqri
BEST Travel Tripod: geni.us/DMUlanziTripod
💰 USE CODE "DAVID" TO SAVE 20%
F38 Quick Release System: geni.us/DMUlanziF38Quick
Vlog Tripod - geni.us/DMApexBase
Vlog Tripod Head - geni.us/DMJobyBallhead
Quick Release System: geni.us/DMF22
THE MUSIC I USE: bit.ly/epidemicsoundDM
---------------------------------------------------------------------------
ACTION CAMERA GEAR:
Insta360 Ace Pro: geni.us/DMAcePro
Insta360 ONE X3 - geni.us/DMVX3
DJI Action 4: geni.us/DMdjiAction4
GoPro Hero 12: geni.us/DMGoPro12
THE BEST GOPRO ACCESSORY: geni.us/DMSnapMount
Quick Release Action Gear: geni.us/DMF22
---------------------------------------------------------------------------
MY PRIME LENSES
35mm - geni.us/DM35mm
50mm - geni.us/DM50mm
85mm - geni.us/DM85mm
90mm - geni.us/DM90mm
The leather camera strap: cleversupply.co/?ref=MKNDV
----Use Code "MANNING" for 10% DISCOUNT
---------------------------------------------------------------------------
GET AHOLD OF ME
INSTA - / david_manning
TWITTER - / david_manning
---------------------------------------------------------------------------
📫 I LIKE MAIL:
David Manning Vlog
PO Box 2622
Valley Center, CA 92082
---------------------------------------------------------------------------
Chapters:
00:00 - Intro
---------------------------------------------------------------------------
*Most links in the description are affiliate links meaning I earn a small commission when you purchase.
#falcam #peakdesign

Пікірлер: 164

@ArgoFowl 6 ай бұрын

great vid man, I was googling a lot of questions that you answered here

@basicgamer9831 6 ай бұрын

This is awesome, can't wait for it to be available on amazon!

@koolaidpapi7674 6 ай бұрын

Yeah i love the F38 /F22 system it’s crazy that peak design dropped the ball and didn’t build out a eco system they just stopped making products either way even if they did it would be outrageously priced

@shaunng8781 6 ай бұрын

Just ordered this yesterday! I was having the same problem with the pointy things hurting my arm so I’m very happy they fixed it

@OzxGG 6 ай бұрын

Yes! I was on this same boat, just ordered the clip!

@SteveGong 2 ай бұрын

That's an ingenious design. Very impressed.

@darrenlam4189 6 ай бұрын

You forgot to mention two of the biggest upgrades to the V2: 1. The plates are infinitely smoother to clip in and remove compared to V1 2. The V2 is compatible with almost all square QR plates from most major companies (PD, PGY, Arca, etc) My only concern for the V2 is how durable to little locking cable is on it. It looks like a similar cable used by the PD attachment points, but we all know how the V1 and V3s could actually fail at a decent rate.

@Taudris 5 ай бұрын

The locking cable doesn't carry much of a load, though. It's just there to keep the metal bar attached and help you gauge which slot to put it into for that particular strap. Hopefully that means it won't be a problem. Very clever system.

@Kaiu24 5 ай бұрын

So my question to this is if you can answer is if the F38 will accept the Peak Design Dual plate?

@ExploreTravelTV 6 ай бұрын

dang, nice, now I have to buy this new strap holder. I have the tripod and various other mounts for this as well. thanks for the review!

@maruwaanmoses 6 ай бұрын

I just got one yesterday! It's incredible

@RafaelSwit 6 ай бұрын

Just got mine a week ago, after Ulanzi Black Friday Sale. Since watching all your previous f38 vids, I was actually wondering when you’ll review it. Nice job!

@WanderingMonkHikes 2 ай бұрын

My new Falcam Backpack clip arrives tomorrow. You and Mark Bennett are costing me a fortune. 😂 Seriously, great video. Thanks for this. I was looking for a solution to carrying my camera. All the best!

@ClaudioAFC 6 ай бұрын

Have you tried the Pgytech Snaplock? Love it. Doesn't move even after so much use.

@JoshuaPeterson_yt 6 ай бұрын

I ordered 2 of these a week ago. Was wondering when we would see videos about it. Ulanzi is really knocking it out of the park lately.

@firpofutbol 6 ай бұрын

I'm deep in the Falcam system but didn't know about this product. I was literally on the same boat as you were when it came to the backpack mount - preferred the peak design over the old falcam mount. Now selling my Peak Deisgn stuff ASAP and getting this thing. So stoked.

@inedex 6 ай бұрын

Ulanzi released it couple of weeks ago. I discovered the clip couple of days ago while browsing their web store. I tried to search for KZfaq reviews and there was literally one. So happy to fully leverage Falcam now as I was considering PD which is too overpriced.

@mtbboy1993 6 ай бұрын

1:06 I saw a review where the guy compared the construction of both tripods, he went really in depth. Conclusion was Peak design has a better construction, as the centre part the centre column goes trough is plastic on the Ulanzi, but it's metal on the Peak Design, but has a plastic part in there too, but just a bushing, so still metal for the main part. So I'm not regretting getting the Peak Design Alu on sale I think I got it for 40% off or something. Got to love sales. But Peak design offers a universal head, so you can mount any head you want. I will eventually do that.

@demiqshots 5 ай бұрын

I've been using the V1 Falcam clip for 2 years now and my issue was the same with the rubbing/uncomfortable build of the backpack clip but the ecosystem is so good, this updated version looks way better and I'll have to get my hands on that!

@stevenwaldstein2249 6 ай бұрын

Thank you for the video. Have been wanting to try this out but my last attempt to order I mistakenly ordered the unit to put on a tripod and not the strap clip. Now I understand what I need to order. Also, what camera bag were you demonstrating with in your video. Can you please share that info. Take care.

@massimopraga4476 6 ай бұрын

Hi David. Is the Peak Design standard plate fully compatible with the Falcam Backpack Clip V2?

@cowanphotograf 5 ай бұрын

I just ordered the falcam v2 with only $5usd delivery to New Zealand , thank you

@NickWiggins20 6 ай бұрын

Hey David great video as usual, would love to make the switch to this system but I recently added the ATOL by silence corner into my setup and I love it as it slides right into my PD capture clips. Do you know if it would work on this new falcam clip. Many thanks keep up the great work 👍🏻

@mtbboy1993 6 ай бұрын

8:47 Interesting mount. I like the locking mechanism. That's simple and secure.But my concern is the strings you wrap behind the straps.

@andyprosserman2088 3 ай бұрын

I’m glad I came across this video, I wanted something like this a year ago and stopped looking! Gonna grab one of these now. Now I just need an F38 attachment that’s compatible with Peak Design’s new Camera Clutch and I’m set. Unless Falcam’s since made one of those too? I’m off to check.

@PortugalCarp 6 ай бұрын

Among other things from them, I got their F38 Quick Release For Camera Shoulder Strap V2 as, unlike the V1 one, it takes other quick release things like the Ellie PD Universal L-Bracket by 3 Legged Things.

@TheOrdinaryUnordinaryGuy 6 ай бұрын

Also bought a bunch of a F38 when I watched your first video about it and then got the mt-68 mini tripod as well. Loving it! But then I recently purchased the Peakdesign micro clutch which sadly doesn’t work with the F38 plate 😢 The clip looks great and definitely looks much easier to attach 😅

@Caprica_ 6 ай бұрын

Love Ulanzi stuff also. I still need to figure out all the quick release parts toorder for my set-up. Just curious if you've also adapted your gopro stuff onto it also. Would be interesting to see that.

@todddammit4628 6 ай бұрын

I saw these on their website 2 weeks ago and pre-ordered 2 of them. Hoping I get them soon!

@PaulFeinberg 6 ай бұрын

Dang it man I just bought more F38 / Peak design plates for this reason!! lol 😂 Now I want the new backpack strap and go back to using just the normal F38 plates! My F38 tripod comes in soon!! Excited! Great video as always! #loveyourcreators

@HDBnB1 6 ай бұрын

your audio is amazing! Did you make a video of your youtube setup?

@MerlinVisuals 6 ай бұрын

Ulanzi fixed all the problems with switching camera gear. I now have one plate mounted on my camera and that goes onto everything: Backpack, Tripod, Gimbal and even the Tripod from my Gimbal has a Ulanzi quick release plate so I can take that off without screwing and it also fits on the camera plate. If you are looking for a all in one solution - this is it.

@JPGam1ng 6 ай бұрын

Dam I just bought the Peak design, am looking for quick release system and I just found it .thanks to this vídeo!!

@shawnchenco 6 ай бұрын

Love my Peak Design stuff! I am not thr biggest fan of Ulanzi but I am happy there is new innovations and competition. More cool stuff for everyone!! But ya not switching, QR is great but i prefer arca swiss compatibility. 👍

@Webpromotions 6 ай бұрын

I had the peak design clip and it kept coming loose. So much so that it went in the bin as i couldn't trust it. Instead I also bought the ulanzi system, f38 and haven't looked back. Its brilliant.

@RobinSaini 6 ай бұрын

Awesome video, can u share that white mat on ur table , can u share the link please

@alexandertaylor6534 5 ай бұрын

Just got a mirrorless and have been trying to figure out which system to go with. People initially recommended PD to me but I discovered F38 thanks to your videos and this system makes more sense in every way. Cheaper, lighter, sleeker design, the F38 has a more efficient mechanism that's also easier to use both in terms of moving the clip to/from backpacks and belts, as well as everyday usage when clipping and unclipping the camera from the base. Great video, thanks for showing us every aspect of what you were talking about in practice. Now to figure out which strap system to go with...

@floof_ball2588 5 ай бұрын

my only concern about his tripod recommendation is the customer service seems horrendous from other people's videos. Thats why I want to go full PD. I am still undecided

@jamesgamerguy3 5 ай бұрын

i got the tripod when it was first announce, i abuse tf outa it. never had an issue other than the fact that it comes with a screw in ball head instead of the f38 ball, the only recently came out with the f38 head and it is not included with the carbon fiber tripod for whatevr reason @@floof_ball2588

@jamesgamerguy3 5 ай бұрын

ive used both. the firmness of the f38 alone is worth the investment. all the pd stuff feels loose and janky , like it works and its meant to be not so firm , but it feels expensively cheap, the f38 stuff legit feels welded on when you use it. like im sure my camera or lens would break way before the mount would fail. thats how tough the lock feels on my rs3 stabiliser

@BrooklynJimmie 6 ай бұрын

That's cool. I bought PGY Tech one and I used it a few times.. Got tired of forgetting the Allen key to get the plate off the camera. I have a Few f. 38 plates though. Maybe... Hmmmm.. Maybe...

@yeeisme 6 ай бұрын

I'm glad to see the chest spurs of V1 go bye-bye. How is it working with your cages?

@demojoys Ай бұрын

ok, sick video but DAMN holy organized wall behind you. Love it

@jwkm6918 6 ай бұрын

Question regarding functionality? Does it work better than PD Capture Clip when fastening/unfastening the camera to the clip? I've always thought that PD's version is hit or miss if you don't get the plates aligned perfectly flat relative to one another when guiding the plate into the clip. Thoughts?

@eagleeatsmonkey3621 6 ай бұрын

ive been waiting for this new clip for mths ... gonna order one now

@jasonspruance 6 ай бұрын

Peak design Arca Swiss on everything but I like this better. On question though, can the F22 plates work on the F38 backpack brackets. It would be nice to be able to put my full size camera for carrying, or my Action Or Insta360 on there for POV shots and still keep the plate size small on the action cams.

@angelocajipe7617 5 ай бұрын

my thumbs were always hurting from the thumb screws of PD, i ended up using the hex screws instead with the allen key be it wearing in my belt or in a back-pack clip. Will also be testing the falcam v2 backpack clip if it's also comfy enough using with the belt 👍

@MartinV. 21 күн бұрын

Great Video

@thethirdrailchannel 6 ай бұрын

I started with Arca but tried the F38 and fell in love (well, not really). Then I found out the F38 base fits the Arca plate. Now I have several F38 and F22 systems. It *DOES* get expensive.

@ciba20 5 ай бұрын

Arca standard is 38 mm, F38 based on this. NATO rail standard is 22 mm, F22 based on this. Manfrotto standard is 50 mm, F50 based on this.

@joshuadanger904 3 ай бұрын

What’s your thoughts on the cable that’s holding that all together? That made me really nervous and is the only reason I haven’t ordered one yet.

@mtbboy1993 6 ай бұрын

7:11I was always weary about those strap clips coming loose, and camera smashing to the ground. But good to see it has a lock 10:02. But he thumb screws could be replaced with regular hex bolts I guess, you just have to match the thread pitch and head. Add some Loctite 243 to keep it secure for longer. 10:05 I guess it's made to be tricky to unlock so it won't happen by accidentally bumping it.

@alavallee2 5 ай бұрын

I have the f38 quick release system and just got the v2 backpack shoulder strap attachment as well. Thing is amazing!! Only minor complaint. Each falcon f38 base plate that I have came with different screws. One was just a flat head, one was a flat head and Allen that matches the f38 tripod Allen wrench(3mm I believe) with is awesome! Finally the new V2 backpack base plate screw came with a flat head and Allen but a 4mm Allen. Again, I’m nit picking, but would love to get one matching screw to that matches all of them. Wrote to Falcam and they said they can’t sell me 1 or 2 matching base plate screws. Looking for the flat head + 4mm Allen that is small enough to fit in Falcam base plates that not too long. If anyone knows where I can get a couple please share. David, thanks for all the great vids!!

@randomname931 5 ай бұрын

game changer. I'm sold.

@drunksaru 6 ай бұрын

Dang it, i gotta buy this now. I bought two of the V1's when they first came out but didn't work well for me so i just unscrewed the quickrelease portion and used that in other applications instead. But like you, i've swapped most of my peak design to Ulanzi's stuff except I still use Peak's anchor hooks and backpacks. Those are still superior in design over Ulanzi. Their anchor hooks snapped on me when carrying my 600mm.

@kaypochi1516 6 ай бұрын

i just buy the pgytech beetle few month ago.. 3 unit of them.. seems like falcam did their homework.. dont know whether is it worth to switch or not..

@paulg3388 6 ай бұрын

I’m obsessed with the F38 system and absolutely everything I have uses it from tripod to the Ulanzi tree system etc etc and I’ll never swap. Bit like Apple I’m deep in the ecosystem !! Lol

@stephensears7483 6 ай бұрын

I have F38 plates attached to everything, but have used the two-way plates because the Peak Design clip fits over my Shimoda backpack strap, and F38 version 1 clip does not. I wonder if the version 2 is compatible with the Shimoda Explorer strap? I know, I know their new urban bag has solved that, but I can’t justify a new bag just for that!

@donnawetter1513 5 ай бұрын

This looks even more compact than the PGYTECH Bettle, still not sure how I fell about the clamp mechanism though.

@micbernier6403 5 ай бұрын

Question, the clip attaches to the bag with 2 elastics cords? It doesn't seem strong to me.

@ChoaYeon 3 ай бұрын

its actually really nice, but i dont know if i trust that lanyard to keep the clip in place on my backpack as i use mu PD clip with a camera while hiking, maybe i'll use it for my urban kit but not for outdoors

@EroNekoSan 6 ай бұрын

Damn it! I bought the V1 3 months ago after watching your review...

@hongk0ngfu3y 6 ай бұрын

is it solid enough for long exposures?

@laurencefleury9799 5 ай бұрын

may be you can help me :-) I first bought the: Ulanzi Falcam F38 Quick Release System (by mistake). I asked them if I can use the plate I already have for this new strap clip. their response was YES. I ordered the: Ulanzi Falcam F38 Quick Release Kit for Camera Backpack Strap Clip V2 F38B3803 × 1 I received it and when i clip it, there is a gap between the plate and the base: Sometimes the plate no longer comes out because it is not aligned for the exit. It makes noise and it could come out on its own... I wrote to them about the problem and their response was: These two products are compatible and the gap between them is normal and is for easier installation !! Did you encounter this problem? Thank you for your insight 😅 (sorry my English si not the best)

@hasimhalim5016 27 күн бұрын

would you mind to share what is the 2:28 plate and the link? it looks sturdy

@TOXICVISUALSS 6 ай бұрын

do your peak design plate fit the f38 mounts?

@kittparker4161 6 ай бұрын

Are peak design plates compatible with the Ulanzi strap clip?

@mtbboy1993 6 ай бұрын

Any reason you don't use a wrist strap? Seems simpler and quicker to me.

@shALKE 2 ай бұрын

so deep into this f38 system because they sponsored you lol

@DavidManningvlog Ай бұрын

Was deep even before they reached out! And they've never sponsored a video on the channel, just affiliate links. Try a few pieces of their gear and you'll understand why I switched my entire system👍

@yu_studio 6 ай бұрын

WOW! Finally, something better than PD!!

@trixieontrail 6 ай бұрын

I'd love to see a vid for an item like this and other accessories, for phone photographers

@luiscruz0530 6 ай бұрын

How secure it is attached to the Backpack? could the latch accidentally release?

@ShimodaDesigns 6 ай бұрын

I ordered my mom an Aura frame for X-mas. I think that’s the first time I’ve I have acted on a video sponsor :) Also new plate looks great, the older one is a bit of a clunker.

@33Jmarvine 6 ай бұрын

Can you please do a review on the “Ulanzi Falcam F22 & F38 & F50 Quick Release Foldable Half Cage For Camera C00B3809” also if your able to put a hdmi clamp on it 😊 , thank you

@lawyerdch 26 күн бұрын

Does v2 fit over wide backpack straps?

@DrummaBoy202 6 ай бұрын

The way he placed that camera face down without the lense cap

@TheRiehlThing42 3 күн бұрын

Do you have to use their plate? I'm trying to find a clip that works with Arca Swiss rail. I have a Smallrig cage, that has an Arca Swiss rail at the bottom, would love to use that, since I also have a Smallrig tripod that has a removable leg, to use as a monopole, if my 3/8" hole on the bottom isn't covered. I almost think I'm going to need to get a cheese board to mount on the bottom, since every plate I've had, whether it is Cotton Carrier or Peak Design, their plate covers the 3/8" hole.

@averyhernandez 6 ай бұрын

I’m considering switching but does it have that jiggle and squeaking like the Peak Design V3?

@tiemji 6 ай бұрын

It's crazy how peak design did not complete the ecosystem. Their gear was good but I switched to another one

@yoavPK1 6 ай бұрын

What about gimbals?? It’s fit for RS3 as well?

@manelbrandaopereira9752 Ай бұрын

Does it work with the f22 &f38 cage? I’d assume it does as it’s f38…

@Marcus_Visbal 6 ай бұрын

I use the pgytech snap lock. They have plates you put in and arca Swiss clap

@JeffCorcelius 6 ай бұрын

I like the F38 system. My first capture clip was polar pro version. It was awesome but also not compatible with anything.

@jakobbur 3 ай бұрын

Which quick release "bit" will work on the gorillapod?

@m1kel 6 ай бұрын

question is, is that bagstrap strong enough or replaceable?

@DavidManningvlog 6 ай бұрын

The Shimoda is designed specifically for a camera clip👍

@hexagonvn8744 6 ай бұрын

So the whole camera weight is secure by 2 cable in the back of the clip, right?

@vvhalefccd Ай бұрын

Wrong, see 8:40 The clip is snapped shut making that hold all the weight. The cables tighten the clip to the strap of your backpack which would probably break before those cables… the cables are protected by the clip.

@ytwatcher6020 6 ай бұрын

Peak design is solid. This V2 relies on a stretchable material that only lasts 3 years before it needs replacement.

@przybylskipawel Ай бұрын

OK. But are these wires strong AND DURABLE enough to hold your camera for dozens of days while attaching and dettaching it over and over again?

@letoxicm8930 3 ай бұрын

bought the falcam v2...it's pretty disappointment. The cable used for clamping is so flimsy it made clamping extremely annoying. On top of that, the rubber anti-slip below needs to be positioned properly otherwise the clamping will uneven. So, unfortunately while the peak design's has its flaws, it is still a better clip.

@michaelknibbs 5 ай бұрын

Can’t resist the enthusiasm. Keep ‘em coming.

@chinitopinoy1726 2 ай бұрын

Can you attach the Falcam V2 on a belt?

@dkdreview Ай бұрын

Hand downs to Ulanzi, best user experince ever!

@posadasjustin 6 ай бұрын

Waiting for v2 to be available locally here in PH

@Duckquack-1 6 ай бұрын

Watching this channel for me is like an alcoholic watching the wine Channel

@zackmalone 6 ай бұрын

Once you get in the Falcam system it’s game over. I’d probably put my future kids in a quick release baby carrier if they made one 😂

@Kiflinn 2 ай бұрын

whats ur vlogging tripod?

@DavidManningvlog 2 ай бұрын

Switchpod with an F38 plate on top at the moment

@davidh3049 5 ай бұрын

The big thing about backpack falcam clip v1 is that v1 is not compatible with the falcam camera cages as v1 has too much bulk. v2 is compatible with the falcam cages ❤️

@teamsaunz 6 ай бұрын

Wow, who knew such a small thing can have a world of difference.

@mccartikiss 5 ай бұрын

We need one of these but for belts

@philippegagnon8219 2 ай бұрын

Personally, I haven't been lucky. I bought the F38 travel and the quick plate that came with it wouldn't stay screwed on. Unlanzi sent me another one, and it was the same story. As soon as I put it on the tripod, it was already unscrewing and loose. I received a third one, and it was the same issue. With my Nikon Z8, the collar of my 200-500mm and 70-200mm lenses, the quick plate becomes loose by the time I put it on the tripod. I sent the whole thing back for a refund.

@Paine137 2 ай бұрын

Try some blue loctite, which can always be undone.

@DavidManningvlog 2 ай бұрын

Interesting, I have six plates on six cameras around here and none of them have come loose. Between the Peak Design plate and F38 plate, I've had a much better experience. Especially the new F38 anti-rotation plates. Those are awesome!

@philippegagnon8219 2 ай бұрын

@@DavidManningvlog I've done some tests, and the plates with a serial number ending in "J" seem okay, while those ending in "Z" become loose.

@LouisLuzuka 6 ай бұрын

I need 😮

@stephenartner 6 ай бұрын

I ordered this product but was very unimpressed with how wobbly and insecure the plate is when attached to the base. When I walk, the camera rattles around and feels very loose even though it's clipped on. It's just not a tight fit. I already own the V1 version of the Falcam backpack clip and I never had this problem.

@DavidManningvlog 6 ай бұрын

So it's an odd conundrum. The Peak Design has the same issue, which is a bit of play side to side. The F38 V1 has no play in the system at all, but a totally different locking system. Personally, I'm okay with the bit of play in the F38 V2 system because it makes the slide in and out so smooth. I'm rarely running with my camera on and just while walking I don't notice it

@destructiondynamics 5 ай бұрын

if anyone sees this and is debating on picking up one of these, careful if you use a backpack with wide straps/no slits in the staps. my Osprey Farpoint 40 desnt seem compatible with the falcam clip after purchasing from seeing this vid. bit disappointed as the product itself seems very well designed

@andreschairez8825 6 ай бұрын

Lol these endings are the best! Ok love the system and want a frame...bjt they dont ship to MX! 😢

@mtbboy1993 6 ай бұрын

7:35 I've never heard them called that, it's Knipex, not knips. Good choice of tools.

@captain-chunk 6 ай бұрын

Oh i need these in the UK....

@eridcreatemoveinspire307 2 ай бұрын

does this backpack clip work with Falcam cage I have on my Sony a7s3?

@DavidManningvlog Ай бұрын

Depends. If you have the older version of the cage that just has f38 on the bottom, yes. If you have the newer version that has a dual f38 and f50 plate, then no it won't work

@eridcreatemoveinspire307 Ай бұрын

@@DavidManningvlog i have the Falcam with f22&38 at the bottom. Thank you for the response ✊🏼