Best Bed Leveling Probe For Creality Printers (KlackEnder)

Рет қаралды 94,691

Жыл бұрын

Love the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
ModBot Merch Store is now live! Get yours here:
bit.ly/3qhJ8Yl
Join the official ModBotArmy discord server: / discord
Get Your KlackEnder Kit Here:
dfh.fm/products/klackender-pr...
GitHub Repository For KlackEnder:
github.com/kevinakasam/KlackE...
KevinAKASam Website:
kevinakasam.com/
KevinAKASam Discord:
/ discord
My Printables Remix for the Micro Swiss NG:
www.printables.com/model/3885...
Micro Swiss NG Extruder:
store.micro-swiss.com/product...
Firmware KlackEnder.cfg:
github.com/kevinakasam/KlackE...
BeltDriven Ender 3 Kit:
dfh.fm/products/beltdrivenend...
In this video we are diving into the Klicky Probe specifically the KlackEnder variant. This version of the Klicky Probe was designed by KevinAKASam to work with the Ender 3 as well as a handful of other Creality printers. (The main consideration is the backplate). The mod is super affordable, very repeatable, and a ton of fun to watch. I will take you as step by step through the install process as possible.
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: / dopesoner930
Twitter: / dopesoner930
Instagram: / modbotarmy
Twitch: / dopesoner930

Пікірлер: 160

@KevinAkaSam Жыл бұрын

Great video! Glad you like the Klack and thanks for the positive feedback :)

@brandoneich2412 Жыл бұрын

Is it compatible with marlin?

@leonartou Жыл бұрын

@@brandoneich2412Yes

@carlosrivas3440 Жыл бұрын

error option points not valid in section homing_override?

@TheSpooniest Жыл бұрын

@@brandoneich2412 I use it with Marlin. Configuration is a little more involved, but it works.

@plezo69 4 ай бұрын

You're a damn Saint @KevinAkaSam all of your mods are user friendly as it gets and fun to build, and that website of yours is stupid proof.

@beauregardslim1914 Жыл бұрын

Having struggled with my own designs for a KlickyNG-inspired probe for my 2 bed slingers, I am a little irritated with the KlackEnder dock's elegant simplicity. Amazing work.

@Darknynja2 Жыл бұрын

This is another ingenious design KevinAKAsam. And another fantastic instructional video by ModBot. Thank you for this and all for all you do to help all of us.

@ModBotArmy Жыл бұрын

Major hats off to KevinAKASam for this. Hopefully this will helps give others another point of reference that are interested in adding this.

@coreyhutton478 Жыл бұрын

And Thank You For Your Fake, Kiss Ass Comment.

@Darknynja2 Жыл бұрын

@@coreyhutton478 who exactly are you talking to and why in the world are you so angry about someone that appreciates these modifications and tutorials? Sounds like you need a nappy nap.

@dillrepair Ай бұрын

@@ModBotArmy tbh you are becoming a pretty damn good resource for those of us who just need a little more visual learning and handholding to go with all the relevant reading on these relatively current 3d printing topics…(at least for those of us still trying to do this on the cheap and for the fun of it vs just buying new machines… so it’s def appreciated. Subbed.

@dillrepair Ай бұрын

The cool thing imo is that much of the work involved with this mod … I feel… has actually trained me to be more proficient with both tuning my printer to get much more accurate and stronger parts (petg is definitely dialed in for me now)… and also more familiar with eventually converting to klipper and editing firmware in vs code etc for marlin/mriscoc stuff in the meantime, so for me this has been an educational project that dovetails with several other cnc related projects I’m working on, it’s very applicable knowledge. And it probably is not easy for a beginner as I am at all… but well worth it while still not being too unattainably difficult. So not only did I learn the stuff I said above but I further learned more CAD stuff using his nicely done parametric cad file…. I’d encourage anyone to get that going on fusion and play around with it.

@pieyed1302 Жыл бұрын

Great instructional video. Looks like another fun project. Thanks to you and KevinAKASam for such complete instructions.

@UpenShenoy Жыл бұрын

What a great video! Kudos to guys like you who is out there helping the community. A true community video.

@hd-be7di 7 ай бұрын

Precise, repeatable, inexpensive and versatile = ticks all the right boxes I will definitely build this probe!!!

@MrTree421 Жыл бұрын

A small comparison to different bed leveling solutions would have been interesting

@nateschmitz9827 Жыл бұрын

kzfaq.info/get/bejne/aNVoqtJ7y7qphpc.html&feature=shares

@SpannMagoo Жыл бұрын

Agreed

@_5bit_ Жыл бұрын

I will just say that this probe is FANTASTIC in an enclosure, I kept having issues with my EZABL probe where my Z height would vary quite far from the actual height, needless to say I dumped it and switched to klackender and now I don't ever need to calibrate my Z offset every print, just on occasions when I need to re-level the bed.

@alejandroperez5368 Жыл бұрын

You realize the BLTouch was also a possibility in that case?

@_5bit_ Жыл бұрын

@@alejandroperez5368 Ha, that thing has also been going wonky in the enclosure as my enclosure easily exceeds 53C during the heat up process, the thing just goes kaput and the results are unusable for auto bed leveling

@randalstout Жыл бұрын

Whew! I think I got it, thanks to you! Works on the original CR-10s like a charm. Finally... bed levelling... now I'm all fancy!

@Kendrik01 Жыл бұрын

I love @KevinAkaSam's mods! I'm running his Klackender and Belted Z-Axis mods and both are awesome and fun to do!

@alexanderscholz8855 Жыл бұрын

HAHAHAHAHA You did it! Angry Eyes jumping, that was my first idea as i saw it. Nice! Stay safe and greatings to all!!!

@DodzilaMen Жыл бұрын

I was about to check if the video is up and I was surprised! GJ

@bwselectronic Жыл бұрын

I like this. When I start doing my own Marlin compile I might try this.

@SupaaMann Жыл бұрын

Been waiting for this video since I saw the short, love to see it

@ModBotArmy Жыл бұрын

It has been on my list for a while. Glad I finally got a chance to visit it. Its sweet.

@marshallbueckert 3 ай бұрын

Thanks for the video. It took me a while to tweak the config files but I got it working on my CR-10 V1. Never looking at a bltouch again ;)

@clixium Жыл бұрын

Did this mod few days ago, all from parts I already had at home. Had to modify holes a bit so I can use 5mm magnets but in the end all works super accurately and reliably, I expected more trouble tbh

@Techknowdude Жыл бұрын

Awesome video! I've wanted to do this since I saw a Voron with it. I'll definitely do some research and see if I can get it to work with my Mutant v2. I'm hoping to mount something to the main carriage so I don't need to have a probe on every mobile plate.

@388bu 11 ай бұрын

Good stuff! All of your videos are well done. Also, you dont annoy me, trust me that means a lot coming from me! Keep it up.

@avejst Жыл бұрын

Impressive design! Great walk-through of the process:-) Thanks for sharing your expirence with all of us 👍 😀

@ModBotArmy Жыл бұрын

Thank you Asger :)

@Creative_Electronics Жыл бұрын

That's very cool! I think I'm going to add something like this to my selfbuild 3D printer instead of using a BL touch

@timmallard5360 Жыл бұрын

Way cool! I love the touch probe on my CR6 but the mounting is flimsy. I will definitely check this out

@mouseFPV Жыл бұрын

KevinakaSams mods are S-Tier.

@TuxWing Жыл бұрын

I was planning on using a pinda probe on my CR-10S project printer, after watching this video I have changed my mind.

@couldja Жыл бұрын

I did both mods. Best thing I did for my Aquila!

@MoFro624 Жыл бұрын

I was debating on doing this since I'm getting ready to do the belted Z mod. Just waiting on the rest of the screws and the stepper cable. I have a Ender 3 Pro running Klipper with a CR Touch so I was up in the air about the Klacky Probe.

@paulradford4100 Жыл бұрын

I really like this idea.. Why have the probe attached when your not using it and to have the signal going through the magnet is an ingenious idea. I would have thought the magnets would interfere with the small electric field, but here it is willed into reality. This should be the way forward..

@roncrummett3047 Жыл бұрын

I love this! I want to put it on my Sovol SV02 but I have a purge bucket attachment in the same location as the probe dock. If the Klicky doubles as the z-endstop then maybe there are some options...gotta think this through...

@scheidch Жыл бұрын

I just recently completed the belted Z mod on my Ender 3 Max and this is next!

@yyungreppin5225 Жыл бұрын

Can you make a before and after video detailing the kevinakasam belted z vs the stock leadscrew's impact on the surface finish? I've been dealing with ugly layers from my e3v2 z axis binding for too long and it seems like the z belt mod would do the trick.

@bagellord 3 ай бұрын

This is exactly what I needed to find for Z probe for the Ender 3 I just acquired. I am curious about one thing - you mention removing the existing Z Endstop unless you're going to use the klipper auto z offset plugin. Do you have any information on that?

@prototype7970 Жыл бұрын

What is the purple filament use for your frame !? Is good looking ! Very cool mod thank you for sharing

@AdamKueflef 2 ай бұрын

I ordered a Cheep klicky probe kit from alliexpress and im using it to make the klack ender with some other parts i have laying around. my $6 3d touch is now being used to make its replacment(the probe has been installed for 6 hours)

@karandex Жыл бұрын

Had lot of trouble with it. Will give it another go

@clixium Жыл бұрын

My only trouble was breaking retainer 2 times until I adjusted gcode to fit my machine, took some sleep and adjusted it perfectly. Now it docks and undocks everytime perfectly, this thing is super reliable and precise once you set it up correctly

@kurtryankoch7356 Жыл бұрын

Hot damn thanks dude

@MichaelThompson77 Жыл бұрын

Lol I was just on the sight looking at this and I put on you tube and bang your already on it. Thanks for the great video

@ModBotArmy Жыл бұрын

Woohoo! Perfect timing :).

@nishantlaxmikant5899 29 күн бұрын

Great video i struggled 5 hrs to do this and still cant figure out why the printer starts like at 10mm height from bed whats the solution i tried all possible z coordinates to be changed no solution

@malcolmnorman5237 Жыл бұрын

Another great video and you caught all the missteps I made yesterday. 😀

@privategarage8898 Ай бұрын

is it possible to wire the klicky on the 5pin bltouch slot for the 4.2.2 board? so i can use the z endstop pin as a Sxbolt for auto z calibration

@HarryPulvirenti Жыл бұрын

@Modbot about the copy and paste of the Z offset this is not really needed. The only thing needed to be done is manually comment the Z offset on the probe section of the klackender.cfg and manually add the Z offset in the autogenerated values section of the printer.cfg file. After this the SAVE_CONFIG command will work as usual. 😁

@MillionMileDrive Жыл бұрын

I tried a clicky probe on my 2.4 and it wouldn't finish the QGL. Reprinted parts twice, tried 3 other microswitches and still no go and had to go back to my inductive probe. Still trying to figure out if it was something I was doing or if it's just not as accurate as people say. Now with Voron Tap released, I don't think I should be wasting my time thinking about clicky... lol

@dasburninator Жыл бұрын

The probe itself is great after fixing some basic printability issues with the CAD. However the klipper macros are not great. They aren’t using standardized macro naming that would allow for the functions to work properly in UI’s etc. Its easily fixed if you know what you’re doing though. I really think a good solution to this is making it work with the klicky probe macros instead. They are so well written and do work with the KlackEnder.

@TheExtremeElementz Жыл бұрын

Just picked up a Ender 3 Pro as the Ender 2 Pro just wasn’t cutting it. I’m thinking of doing the belted Z mod, I see you went with the single belted Z do you regret not going with the dual belted Z? Thanks!

@PaganWizard Жыл бұрын

When you get Superglue on your skin, nail polish remover will work in just a few painless seconds to dissolve it. I have an Ender 5 Plus with an Exoslide, MicroSwiss DD, which I believe is the same setup as what you have, and I am getting ready to install a BTT SKR Pro v1.2. I will not be using Marlin or RepRap, will this work with my hardware and firmware setup???

@EsotericArctos 2 ай бұрын

Is there a version of this available for the Ender 5 with the Micro Swiss NG DD extruder/hotend? Also, what benefits does Klicky have over a BLTouch? Just curious which would be more accurate.

@jaati8670 Жыл бұрын

whan i create the mesh it wants to prit where it measured the mesh and not the nozzle and i dont know where i can trim it to the nozzle

@PMcDFPV Жыл бұрын

Awesome video man :-) how do you feel this compares to the tap tap probe?

@ModBotArmy Жыл бұрын

So I dont have first experience with the Tap. However, I dont believe it has been implemented into any other toolheads than the Stealthburner so far and it is not compatible with nearly as many printers. I know someone who has had good results with a reinforced bed frame with dual linear rails but for standard pcb beds from what I am seeing it isnt recommended.

@Hilmi12 Жыл бұрын

Acetone like nail polish remover will easily remove superglue from your skin

@TDGroundHawg 14 күн бұрын

what program are you using to edit the firmware? im trying to use PlatformIO but i am not coming any further than opening the program.

@joiscara7191 Жыл бұрын

Do I need this even though I have a CR Touch? Which is more accurate? CRT or Klacker?

@middleagebrotips3454 Жыл бұрын

You can also salvage the switch from old computer mice you have laying around.

@hd-be7di 7 ай бұрын

I plan to use Kailh GM 8.0 pro gamer switches with 24k gold contact and 80 million click rating

@jcfpv3454 Жыл бұрын

I would love to see this on a delta something like a Flsun Super Racer its always a pain when leveling and when using klipper its pure hell to get a decent bed level with the stock probe I dont thing its klipper but something in either the stock probe or firmware is a bug any thoughts i would really like to do this for a Super Racer.

@carlosrivas3440 Жыл бұрын

muy bueno_ cual se utiliza para voron??

@jbarcarp Жыл бұрын

I have it installed and running, but... I can't get the mesh and z offset to save, and the gantry doesn't pickup or drop off the probe when doing the mesh. I have to place it manually.??

@ryanarhart4994 Жыл бұрын

I have the NG as well and when I see your values for the stepper Y, I put in position_min: 10 and position_endstop: 8, but I get an error because 8 is less than the minimum of 10. Should those values be flipped?

@Mjlcarguy456 Жыл бұрын

I noticed you still have your stock V2 screen installed with the E3EZ board. Does it do anything? Can you still use it?

@santiagomoneta Ай бұрын

I modded my v2 with almost everything except the z-belted axis.. but I'm having problems tuning it for Klipper and get the most out of it.. I use OrcaSlicer and the default v2 profile is based on marlin.. so... super slow... and the default Klipper printer acceleration numbers are way too high... is there a proper way to get the maximum numbers for the v2 on arcaslicer? i would love to see a "Ender 3v2 marlin to klipper speed tunning guide" that not only show the the calibration parts and the filament tunning but how to properly tune all speeds to get the most out of it

@connorestes1084 9 ай бұрын

Hi I just set this up and klipper gives me this error Section 'menu __main' is not a valid config section Once the underlying issue is corrected, use the "RESTART" command to reload the config and restart the host software. Printer is halted

@fredyy Жыл бұрын

What makes the klicky setup better than a bl-touch, other than the price?

@billsian3d Жыл бұрын

looks greate i have thingivers fan duck mod (Satsana Duct for Ender 3 V2) is there way to use ?

@lumpydabest4256 Жыл бұрын

would this work with ender 3 pro? it's the base machine and I'm using Cura software, no marlin, no Klipper. I want to add this to my printer but not sure how. I was wondering if you could help me on this?

@Townie_au Жыл бұрын

Aww, I'm Devo. I just got this all installed and the wire or switch contacts are not connecting to the surface of the magnets. Magnet to itself conducts. Switch contacts verify switch is working. Can't solder. Magnets superglued in. Drove 40mins each way to pick up these magnets. 😭

@skyeblackledge2068 Жыл бұрын

Would love you to expand on this with the calibrate z add on

@ModBotArmy Жыл бұрын

I may consider it. I had not planned on doing it on this printer but I am definitely interested in exploring it further even if it is on a different printer.

@Reds3DPrinting 9 ай бұрын

Can anyone help, is this better than CR touch?? I have an ender 3 neo V1

@BabyDahl28 5 ай бұрын

I would have loved to see him go through the leveling process post install. Im still a little unsure about what I would gain with this over a CR Touch? The obvious is no longer having to look for probe mounts, but what are other advantages? is the switch that much more accurate than a Probe?

@gabriellacombedecastro3463 4 ай бұрын

Same here

@mrvelocity3428 3 ай бұрын

yes it is much more accurate and it's cheeper much cheeper

@MultiDarkside2011 Жыл бұрын

Is this compatile with Creality CR-10 V2 and Marlin 2 ? I want to replace the BL Touch with the KlackEnder

@AnthonyGossner Жыл бұрын

What is the best way to figure out z-offset with this setup? I used the PROBE_CALIBRATE with the bl touch but that doesn't seem to apply anymore. I was thinking a macro along the lines of: [gcode_macro Z_Offset] G28 X G28 Y PROBE_OUT G1 X114 Y103 F6000 #my offsets G28 Z PROBE_IN G1 X114 Y103 F6000 #my offsets

@nikostis69 Жыл бұрын

Can you recommend any forum for 3d printing/laser?

@NickShl 10 ай бұрын

How is that better than BL/3D/CR Touch and why we should use it?

@aplyardfpv4067 Жыл бұрын

Hello, nice video and explanation. Can you please point me to the files of the switchwire version of this probe? thank you!

@jeffharrison5265 Жыл бұрын

Great video! Is the setup generally the same for a Ender 3 Pro with the Sonic Pad?

@ModBotArmy Жыл бұрын

Should be identical since it is Klipper. Using the stock board your pin would be different but other than that I cannot think of any other differences that you would have to do.

@jeffharrison5265 Жыл бұрын

@@ModBotArmy Great. Thanks.

@nicktopo8380 7 ай бұрын

is this possible using the zstop on ender 3?

@rcflyer2k Жыл бұрын

Great install video, but another video showing the issues users face upgrading another from another probe with an existing printer.cfg with some addons already installed. There are a lot of settings that make it a lot more complicated to get working. tilt_screw_adjust, and probe_calibrate macros are especially trouble prone if you are not very klipper knowedgable.

@sbouloc Жыл бұрын

I myself run into troubles upgrading from a BLTouch: duplicate chip name ´probe’. I would love to see a video addressing this.

@stephanw196 Жыл бұрын

Do you know if this probe fits to the sprite extruder kit? Thanks for sharing this!!

@sbouloc Жыл бұрын

Everything fits without mods. I just have conflicts with previous bltouch install

@charlesrestivo870 Жыл бұрын

Do u have a video of ng install on v2

@Graeme758 Жыл бұрын

Nope, as soon as you mentioned Klipper I was out, not wasting a second longer getting that to work. Shame, it looks really good.

@arseburgers4208 4 ай бұрын

That's what I thought, watched it though, turns out it works on marlin too. May be worth a watch tbh, I'm debating scrapping an old mouse for switches and screws at this point lol

@the4thj Жыл бұрын

~Campfire chat! I like the idea but I have to use Marlin 😞for my SKR mini 3 v3 bla bla.

@subwolf2198 Жыл бұрын

Would this work on the ender 3 s1 pro?

@woodwaker1 Жыл бұрын

Thanks for a video that shows an improvement on a printer and not another cheap Chinese clone. Too many of them on the 3D channels we need more interesting unique information like this

@ModBotArmy Жыл бұрын

There will still be some videos on low cost Chinese printers but I have been saying no much more often than yes. I got the Sovol SV06 Plus in because I see alot of value there as well as another I have been testing. That being said I absolutely understand what you are saying and certainly dont want to make that the focus. Too many other cool things :)

@woodwaker1 Жыл бұрын

@@ModBotArmy Thanks for the reply. I guess what I was saying as a long term user of 3D printers, that I want more interesting content than the latest cheap I3 clone. You do a lot of interesting content.

@johndavis29209 Жыл бұрын

Digging the haircut 👍

@flamixin 2 ай бұрын

So why not just use bltouch?

@Paulo_Araos Жыл бұрын

Hello, can it be done on an ender 6?

@chriswoods9857 Жыл бұрын

Grrrrrr I just sat here for 2 hours just to get this error: Klipper reports: ERROR Section 'menu __main __klackender' is not a valid config section Once the underlying issue is corrected, use the "RESTART" command to reload the config and restart the host software. Printer is halted Cannot figure this out! I guess it is back to the old school way

@lsellclumanetsolarenergyll5071 Жыл бұрын

I bet those parts would look a lot better in resin printed extra tough material.

@ctrlaltdebug 4 ай бұрын

Ugh, cables dragging across the print bed...

@Lucas_sGarage Жыл бұрын

just so u know, marlin also supports it and with basically any tft automatically creates a g29 macro

@gymkhanadog Ай бұрын

It's so funny that this has now become a 'thing' when several years prior this was one of those 'meh' methods of bed leveling because microswitches have such low precision for activation. Same for inductive; used to be poo-poo'd on but plenty of people use them now. Still staying with the good ol' BLTouch that never lets me down!

@milanspacek7387 7 ай бұрын

hey there... ive followed step by step you tutorial but now when i try to home, it shows "Move out of range: 245.000 -8.000 10.000 [0.000]" on all axis... any idea what did i make wrong please??

@alexellistattoofpv 6 күн бұрын

did you find a solution? I'm having the same error

@TheRoon4660 Жыл бұрын

Usually I can understand you but this is total geek. But I am 78 yo. I can print anything on my Ender 3 pro. I wouldn't be able to do anything without youtube videos. Just slow down a bit for brain dead people like me if you please. You have a very good channel.

@ModBotArmy Жыл бұрын

This is a pretty technical mod. The documentation I linked should give you much of the details you want. If you decide to move forward with the mod after this should help with giving an additional visual/reference point :)

@MisterkeTube Жыл бұрын

I'm just wondering why the probe isn't park at the bottom (so on the stopper). That would avoid picking it up by accident when printing over the entire bed. Now if you get a bit higher up and move the head all the way to the right, you could be accidentally pick up the probe. If it would be parked at the bottom, you only need to take care not to move up quite a bit before moving to the left again, something you normally won't do while printing ...

@ModBotArmy Жыл бұрын

If you dont have it on the x axis extrusion you will need an additional z endstop. With it on the x axis it knows it can go to the right until it grabs it. If it is on the bottom it could crash into the bed before it grabs it. I have the setup you are describing on my Switchwire and I also have a z min switch that it needs to reach first to let it know it has homed before it goes to find the probe. It is a messier setup. I am hoping to convert it to an x axis setup as well. During normal printing it shouldnt be an issue.

@MisterkeTube Жыл бұрын

@@ModBotArmy No you don't. Since the contact is normally-closed, Klipper can just move up 5mm, home x & y, move to the x coordinate to pick up the probe, then move down and detect while moving down when the probe attaches to the magnets (as then the circuit gets closed). It can then move up to keep it attached and measure Z in the center using the probe

@boggisthecat Жыл бұрын

@@MisterkeTube This capability would have to be in the firmware. I’m not sure what the advantage is, as the position on the Y-axis doesn’t appear to encroach on the build volume. KIS always applies.

@MisterkeTube Жыл бұрын

@@boggisthecat No need to have that in firmware if you are running Klipper as you can implement that in macros. There isn't much difference between this moving down and detecting pickup of the probe and the initial z-home with a probe. Both will not know z at the start of the move and move down until a condition triggers. Implementation in the firmware itself would be even easier in both Klippper and Marlin. Anyway, on this printer you might have sufficient room off the side to not pickup the probe by accident when moving to the side of the bed, but that won't be feasible on every bedslinger. Having the probe in a basket at the bottom would only have you accidentally attract it on the bottom layers, but then when your head moves away again side-ways (as that is the normal movement when printing), the probe would detach again as it isn't lifted out of the basket. So for printers without extra room in x direction, this would still allow use of a klicky probe. Also, not having to remove a screw of one of the right v-wheels to mount the holder and only having to attach a single basket on the v-slots at the bottom, seems like KISS to me.

@boggisthecat Жыл бұрын

@@MisterkeTube No advantage for this printer. Lot’s of unnecessary work and a requirement to run Klipper? That’s the opposite of KIS.

@dev-debug Жыл бұрын

The only thing left Ender on mine is most of the frame lol Many would be surprised how much probes like the BL Touch vary, they really are just good enough but not always repeatable. Mines now a DD-IDEX so double headaches when I change nozzles etc. Finally had enough and wrote a pyhon script that talks to moonraker, uses a cheap FSR (force sensing resistor) for getting first layer height for both hotends, works great and all automateds. Cost was about $10 to make it. I leave probe z_offset at 1.0 and set the nozzle offsets in my tool change macro using z_adjust. Still need a klicky to probe and home though. Hard to beat a simple good quality switch.

@nathan22211 Жыл бұрын

could you share that? Might try to do that for my SV04

@JohanFasth Жыл бұрын

Why use this instead of a Bltouch? Is the repetivity error comparable?

@gerrycave Жыл бұрын

BLTouch is not as reliable when printing ABS/ASA, at higher temperatures, with an enclosure or heated chamber

@tonyradle8747 Жыл бұрын

This works out alot cheaper at the very least. Maybe 2 dollars in parts compared to a BLTouch at 40 or 50. These seem to also perform better, less tempature drift and such.

@JohanFasth Жыл бұрын

@@gerrycave OK, thanks. I can't get the touch to work with Klipper no matter what I change so this is the way to go then. Or use Marlin with touch, that works.

@kurtbautista4191 Жыл бұрын

Hi dude does this support the 1.1.4 main board for ender 3 V1?

@ModBotArmy Жыл бұрын

Board type shouldn’t matter. It takes the place of your z limit switch.

@TripodsGarage Жыл бұрын

So barbaric cutting off legs 😆

@htpkey Жыл бұрын

Does it perform better than the BL-Touch or CR-Touch?

@ModBotArmy Жыл бұрын

I prefer it over either. To me the little probe leg is a fail point and parts for this are like $5 versus 30-40 for those. Not that the others are a bad option if you already have them I just have had such good results with these its hard for me to justify going a different route.

@htpkey Жыл бұрын

@@ModBotArmy Thank you for your reply! I like that this probe works with both Marlin and Klipper. It's also great news that it's less expensive than the BL-Touch and CR-Touch. Having more options as a maker is good. I currently use a CR-Touch and it works fine. I might consider this mod in the future. Thanks!

@rcflyer2k Жыл бұрын

Ran a probe accuracy tests on both the BL and the Klack. I was surprised how much more accurate & repeatable the Klack is. The CR came in much more inaccurate in my tests than the BL

@halcyonspree1523 9 ай бұрын

This so cool then this mod fixes the dumb servo mod for switchwire no servo!!!!

@alejandroperez5368 Жыл бұрын

You weren't clear enough at the beginning of the video on the fact you NO LONGER require a z-endstop with this new version of the mod. In his first release you still needed a z-endstop.

@jimmyd5117 4 ай бұрын

Well hopefully this mod can help me with my inconsistent dodgy cr touch! At a fraction of the cost and i can get everything i need locally, why not 🤞

@3D_Printing Жыл бұрын

Two Heads are better than one add another hot end unit:)

@ModBotArmy Жыл бұрын

Double trouble! haha. I will be playing around a bit more with some dual extrusion this year. Maybe one day I will even look into building the Tridex :)

@carlosrivas3440 Жыл бұрын

Alguien lo ha compilado en marlin?? Yo no puedo