I am truly delighted that our machine has provided you with a great welding experience. We will continue to maintain this and hope to see more interesting content from you 🤩.

Hi AC, I thought you did fine with your presentation it was Great! I have 13 years of Tig experience behind me in Stainless, Aluminum, mild steel, and Hastloy. I talked to my Boss I now work for about buying a Tig unit. We decided to pick this one after we had tried the Hynade 200 AC/DC Tig. The Hynade one worked for 15 minutes, we thought it was just a single problem. We asked them to send us another but no the other would not even run on Tig. Sent them back. I haven't really had a chance to work with this unit yet, just set it up. turned it on to see if it worked. After two more weeks, we could not return it. Well, the tig worked fine, but the stick part is fantastic, 6010 cooking, no hesitation, kick azz power. It has been too busy to check it all out. I come online to find out how to set up the foot pedal. Thanks to AC I now know! The pulse I have used many times in the past welding Hastloy. I used a Miller Sinscrowave 250 with a cooler. the settings I will have to work out myself. IAM a B-pressure welder since 1983, I am old but not dead still learning. Trying to keep up with the Tech of the world. I worked for Global Thermoelectric Bassano Alberta Canada, Look it up. Exchanger Industries Alberta Canada.

Very helpful video. I've got zero TIG experience and now have the same machine - very happy with it.

I have the new YesWelder AC/DC tig welder and it’s amazing. I have 20 years welding experience. I also bout the 65 amp plasma and the YVW-200 MiG. All amazing. I love Everlast, AHP. But am looking at getting the PrimeWeld 325 amp tig welder for heavier aluminum. These new affordable welders are scary solid.

Not trying to be pesky I'll definitely will say that machine will out work your syncrowave. Take your torch off the blue and put it on the arcapton. If it is water-cooled torch get a eBay watercooler for it you'll be fine. I have a primeweld Tig 225x with Max cool 3000 watercooler and CK worldwide flex-loc torch makes it a perfect setup. Did a lot of shopping around for 2 yrs before I pulled the trigger had 2k to get a tig machine and found primeweld got my whole setup for under 2k been happy with my setup for 3 yrs now no disappointment.... 😎😎😎😎😎😎😎

I purchased the ArcCaptain 200p tig welder, it's so smooth. I'm so impressed.

Great job going through the process of the welder it's something good for noobs. If the machine wasn't in the pricing of primeweld Tig 225x I would definitely be interested in getting one. There is ahp, Eastwood, lotos, all comparable prices. Besides all that mumbo jumbo it's all good to me I go through the same thing with my yeswelder helmet all three of them it seems to not like steel under 150 amps don't know why I turn up the sensitivity until it just darken up for the room and back off a touch. 😊😊😊😊😊

this one is on my list. decided to get a dedicated tig welder. thanks...

Im a stainless tig welder and been trying to find a tig machine I can use at home that welds the same as machines at work, I’ll give it a try looks great. Tired of machines being 2-10k lol

Can you post the part 2? I’d really like to see that.

I know this video is from last August, and you may have figured it out, but you can turn the exposure all the way down on your phone to get decent arc shots without having to use a dark lens.

Solid review. Thanks

Great review, you do a fantastic job, but for the money I believe that the Hynade 200 AC/DC Tig is a better buy at $640. Thank You

How good is it with aluminum, and at what thickness?

How do you know if your configured for the foot pedal. Is there no remote or foot pedal switch ? Do you put it in 2T and it auto detects a foot pedal ?

Thanks for the review, don’t know why you are fooling with the pulse feature, your metal is plenty thick. Would rather see you lay it in with some heat like a champ using the pedal. If you are skilled enough you can just use the pedal on thinner metal. Seems like your welds need more heat to puddle out better. Why shoot a video using pulse which you are unfamiliar with for your first review of this machine. Curious to know if this machine has ac high frequency for aluminum as well as what frequency it can weld at? Can it do 120hz? Does it have a clean % adjustment to control the negative time vs the positive time of the square wave. More info needed before I would consider this machine.

So with the pulse settings you can run the machine with the on off finger trigger only?

I ordered one of their machines, they didn’t deliver everything I ordered. I was going to order the 200P . So I tried calling the number on their website it’s not a good number.

And how does it run on 20 amp breaker 110v ? Tig and stick

Is $1000 - $1200 really a budget TIG welder. I'm going to be welding only 12g Stainless Wire.

Would rather have seen the AC settings, waveforms, balance, ect

Tank you Very murch Friend Ok ! 10

Great video

Many welder videos have very few comments maybe people aren't buying stuff

ya waitin on the alumium,,,and glass cup

Are you pulsing with the foot pedal?

Great vid. CAN you check the true Amps of it to see how accurate it is?😊

You didn't tell me if it had a adjustable square wave

I'm really interested but there seems to be so many adverts!

Does it have high frequency start?

How is welder for welding 18 gauge body panels, and how easy it to setup for novice welder?

Can it run 6010 stick ?

How much did it cost?

Does it tig al?

Not bad for content but cannot watch when you're not running an arc==I get motion sick from the moving camera. Maybe shoot with a $30-50 tripod?

How much it is

Everlast is way better when you get in this price range

You're running your amps too low and burning that metal away.. go more amps and move faster

Congrats on getting to that level of knowledge about welding machines and their applications but pulse is a very basic, 101 sort of information about welding. Before you review something, familiarize yourself with all of the products capabilities. Good job, keep learning! P.s DONT USE FUSION WELDS FOR AN EXHAUST. Take each piece and bevel their welding face (where you join the pieces) ideally all the way to the bottom if you're confident in your skills filling gaps. Otherwise leave a tiny little lip on the weld face to allow the molten metal to settle into the gap flush with the inside. Depending on the thickness of the material you'll need multiple passes to lay a proper, strong weld. The first pass will just fill the tiny gap left after tacking (make a small tack to hold the material in place). Then you'll wanna (if you can) make the next pass both the filler and the cover pass. That way if you must you can grind off material to make the welds flush, and they will retain much of their strength. Fusion welds are about as effective as superglue.

Should really wear better PPE. You're getting blasted with UV radiation. Don't want melanoma, long sleeves brother!

What is the dutysycle? How long does it weld before it shuts down?

First thing you need to find is a Welder 😂