That is awesome! happy to have helped

Could you confirm where you ordered the part from? Or provide the link if possible.

Gotta love when it turns out that way :)..

I had the exact the same problem 😢😂❤

I'm glad it worked :)

​@@SeshankMalap I need your help

Glad it helped

remote works directly with the control circuit under the seat but the pedal works through the relay and a switch in the pedal. I would start with checking the switch in the pedal itself.

I’m having the same problem! Car turns on lights work, but when pressing the pedal it clicks and then when pedal is released it clicks again. HELP!!

Yes.. just disconnect the motor from the board (pull the terminal tabs and run the battery wire directly to the motor. Polarity doesn't matter, it will just change the direction of rotation

YES! I have this same problem and cannot find a solution anywhere!

Same problem!

Same problem. Mine is new car

Hi, having same issue. Did anyone find a solution to this

Mine does the same thing, any fix for it ?

If it does work for 3 ft, it could be a battery problem. I would turn it over ( so no load ) and try to see how long it works with hand on the pedal. It it works fine with no load on the wheels, your battery might be weak

If you mean the charging port, I think there is a switch in that small black box that isolates charging and load circuit ( hence the size). I did not open it to check. Its been working since I fixed it a year back. No issues.

I think it will as there is nothing telling the car that a cable is connected. obviously that's not same especially with kiddos in it.

im having the same issue as you right now , did you get it fixed?

there is a circuit behind the dashboard that controls all the audio/headlight accessories. Its independent of the main motor and control. There is also a volume button that could be the culprit. remove the dashboard and look for the issue.

I would measure the voltage at the motor terminals on the steering wheel while you press turn buttons (assuming forward and backward is working. It could be the relay that actuates that motor. If none of the functions are working, try resetting/ pairing and unpairig the remote. You could go on the receiver board and start probing things to see if the signal is actually getting transmitted and processed by the car but i havent tried any of it so dont know where to probe. I believe you can find replacement remotes on Amazon. You can try that route and return it if it doesn't work.

@@SeshankMalap thank you so much my friend i will chek this out this week 😁

We do. Just try not to let kids drive away with it while charging. The switch was there to prevent the driver to drive away while the car was fueling. We just removed the fail safe.

Pop the switch out with a flat knife and swap the cables around .might work .car will go forwards instead .not that sure but worth a try

that's odd. Transmitter should not change the way physical pedal works.. are you also changing the main controller? I would check the pin that sends the signal from the pedal to the controller..

you could try repairing it. I forget the procedure but mine never worked after a few months. My kids grew up and could steer the car fine so never bothered fixing it either. sorry.

​@@SeshankMalap where can i change it

Aliexpress

you can get it from Amazon. I believe most of these parts are generic in all Chinese 6V ride ons.

motor is easy to check.. connect your battery cables directly to the motor terminals.. if it runs.. motor is not the issue. motor usually is not the issue.. I would think there is something wrong with your controller.

kzfaq.info/get/bejne/ba-okrSJtpfIqYU.html

Here you go. Let me know if you have questions. I forgot to mention that there is no light to indicate charging. If you didn't make any changes, the power button ( turn on sound) should not work while charging.

you could try and bypass the switch/charging plug completely (temporarily) and see if that helps?

What to do when the car just keep on having clicking noise when charging? Please help

@@ivyhazel8111 I would try and change the controller. you can buy them from amazon. If it doesnt work, you can always return them

It is just under the seat. Ours has a sticker on it.

@@SeshankMalap yea I got the same car for my little brother I cant find where charge it i checked under the seat

Will post a video tomorrow showing where and how to charge

@@setasylla962 kzfaq.info/get/bejne/ba-okrSJtpfIqYU.html

Do you hear a click from the relay when you press the gas pedal? If not, there might be issuewith the charging switch which disables the power to the forward/backward relay when the charger is plugged in.

@@SeshankMalap I dont hear relay can I just put a jumper wire from the two reds and see if it moves?

@@bom8067 you could.. that will just tell you that the motor is working.. which usually won't be an issue. Doesn't hurt to try. Next I would bypass the charging cable/fuse and wire the drive board directly from the battery.. you would still need to turn the main switch on and gas pedal to move the car.. that would check if. The issue is with the charging safety switch.

@@SeshankMalap I’m having the same problem with my kids toy car it turn on audio and all the lights work but won’t go forward I would like your if you can help me all I hear is tiking form behind the battery

@@SeshankMalap Hello - I am having trouble with my Kid Trax UTV 12v - Battery is good - makes noises but will not move forward. I do hear the "click" from the relay when I press the gas pedal. Any ideas on what this might be? Thank you!

true.. wanted to use what I already had..

what should I solder?

The idea is to bypass. I dont recall the colors ( they might even be different on yours) but trace the cables and bypass the switch so its a non issue.

50 minutes sounds pretty good. We never used it that long so I am not sure how long it supposed to last. I think the range will really depend on where you drive ( pavement vs indoors etc) as it is dependent on how much load (current) the motor is pulling.