Best E-bike Lock? Angle Grinder-Proof Hiplok D1000 Test

Рет қаралды 103,358

2 жыл бұрын

My book "DIY Lithium Batteries" on sale at amzn.to/2jbxvzS
My book "Ultimate DIY eBike Guide" on sale at: amzn.to/2BGx4Fn
This lock: hiplok.com/d1000-anti-angle-g...
This angle grinder: amzn.to/3oAgWyo
The e-bike in back: bit.ly/Lectric-XP
The gear I use to make my videos:
Camera - Nikon D5300: amzn.to/2DcuVlM
Lens - Tamron 18mm - 270mm: amzn.to/2qLZlsG
Thermal camera for iPhone/Android: amzn.to/2FikWvW
Drone for "follow me" filming: amzn.to/2UFOds5
Camera for invisible selfie stick shots: amzn.to/2Vb9D0r
Here are some of the products I use:
Bafang BBS01 kit: s.click.aliexpress.com/e/N0sm1W1w
Bafang BBS02 kit: s.click.aliexpress.com/e/EcGPWXRE
Bafang BBSHD kit: s.click.aliexpress.com/e/MMNrZUC0
250W complete e-bike kit: s.click.aliexpress.com/e/cQzxxhpm
500W complete e-bike kit: s.click.aliexpress.com/e/o6rnMv1q
1,000W complete e-bike kit: s.click.aliexpress.com/e/NGZvnq3Q
36V 15Ah Hailong (shark) battery: s.click.aliexpress.com/e/CAEvhRSY
48V 15 Ah triangle battery: s.click.aliexpress.com/e/234OZ5Kg
52V 20 Ah triangle battery: s.click.aliexpress.com/e/m0huJ2PI
All ebike batteries: goo.gl/7pAi9Z
All 18650 cells: goo.gl/hYWnwU
100W Flexible solar panel: s.click.aliexpress.com/e/DurJQaTe
100W Folding solar panel: s.click.aliexpress.com/e/C9raRNuM
Cycle Analyst: goo.gl/RsmE3N
The parts that I use for building batteries:
18650 cells: goo.gl/aEabAQ
18650 positive insulating washer: goo.gl/HBVOuc
Nickel strip: goo.gl/VIrNQq
Spot welder: goo.gl/KN3Uaw
BMSs: goo.gl/S6gSQx
Silicone wire: goo.gl/xmpbKD
Black 18650 cell spacers: goo.gl/hQxWF6
Vruzend cell spacers: goo.gl/5ReLqA
Large heat shrink tubing: goo.gl/6v1ow9
Small heat shrink tubing: goo.gl/OU3Z6u
Foam sheet for protecting battery: goo.gl/5e71tE
Kapton tape: goo.gl/D6BT57
Chargers: goo.gl/js0T0V
**Question response book giveaway rules**
When you guys asks questions in the comments of my videos, I'll try to answer them. If there are questions that I think would make a good video response, I'll choose them to do a longer segment. If I choose your question for a video response, you'll win a copy of my book The Ultimate DIY Ebike Guide (the paperback or the ebook), or my book DIY Lithium Batteries.
Here are some things that KZfaq makes me say: This contest is not sponsored by KZfaq and KZfaq isn't affiliated with it. I'm supposed to provide a link to the community guidelines for KZfaq (kzfaq.infocommunity_gu.... KZfaq is not a sponsor of this "contest" and by participating, you are releasing KZfaq from any potential liability, whatever that might be. Privacy notice: I won't steal your info. If you do win, you can choose to send me your address so I can mail you a paperback copy of the book (or some other prize if that changes) or you can send me an email address and I'll send you a copy of the ebook. I will do everything in my power to immediately forget your personal information afterwards.
Outro Music: BenSounds

Пікірлер: 465

@ghofling 2 жыл бұрын

I agree with you, Micah. Even the grinder eventually cuts through the lock, it would be after several discs, a lot of noise and the chance to get caught. In my opinion, the lock delivers on it’s promise.

@benbraceletspurple9108 Жыл бұрын

Remember you need to fill cuts. The first cut doesn't do much. So a total of 10 discs. A second lock would take even more discs due to fatigue of holding the grinder. And another battery.

@bluenose7984 Жыл бұрын

Also you have to cut through both sides of the lock to get it off the bike, I've seen people take 5 blades to get through both sides with a mains operated grinder which a thief wont have on the side of the road. Awesome lock.

@kurisu7885 3 ай бұрын

Not to mention it looks like it took nearly two full battery charges.

@IVAN_ENT 2 жыл бұрын

This is alot more impressive than I expected tbh ,an angle grinder with enough discs will cut through practically anything within reason and this held up far far longer than a normal u lock

@punkdigerati Жыл бұрын

You didn't mention that you would have to do that twice, because it's dual shackle. You have to cut through both sides to remove the bike.

@larryc1616 11 ай бұрын

Yup just like the NY Kryptonite U lock. You need to cut 2x with multiple change of disks and batteries.

@manoz6194 10 ай бұрын

@@larryc1616 My ebike was stolen on Monday which was locked with a Kryptonite Evolution lock. I was only in the supermarket for no more than 5 minutes and when I came back all that was left was my lock in 2 pieces. Looks like they used an angle grinder on it. The kryptonite locks can be cut very quickly with angle grinders so now I looking for a grinder proof lock because my work as a food delivery guy is reliant on my ebike.

@larryc1616 10 ай бұрын

@manoz6194 the 13mm evolution is too thin. Get one with a diamond rating like the 18mm NY kryptonite. Use a disk brake lock with alarm too. Add a 3rd chain lock if in a bad neighborhood and Hide an airtag in the battery compartment. Good luck next time!

@manoz6194 10 ай бұрын

@@larryc1616 I bought the NY lock but I'm still paranoid about it so I ordered the Litelok X1 too which is actually lighter and specially made for angle grinder use. I got an alarm which is motion detected which is also a light and I've ordered a Galaxy Tag and a holder for the saddle. It's a ebike not a motorbike. I think the thieves were lying in wait

@josephpmcl1241 7 ай бұрын

@@manoz6194let us know how the litelock works out I'm thinking of getting it. I'm sorry to hear your bike was stolen, it's unlucky, and it always happens at the worst time!

@oldsoldier4209 2 жыл бұрын

I’m new to the channel, but really enjoying the content. At age 52, my knees aren’t what they used to be, and biking has become rare. So, I’ve been looking into Ebikes for assistance with uphill slopes. I’m learning quite a bit here, and not just about bikes. Thank you for sharing your knowledge, and making it easy to grasp. 🤠👍

@duMaurier15 2 жыл бұрын

ebiking is fun!! just be careful where you store or park it. They are worth money and easy to steal.

@apollosays7225 2 жыл бұрын

Truly appreciate this video and saved it for future reference! can't praise you enough for educating us with non-promotional ideas and products. Good on Hiplok for sending you a lock as promo.

@1958pc 2 жыл бұрын

Now looking to buy one of these. I've been looking for this level of peace of mind and, it's been reviewed by you, I think I can trust it.

@ronstone6045 Жыл бұрын

I was looking for a great lock for my grandson’s e bike. You did a great video. Thank you Ron

@zechariahsmith1764 2 жыл бұрын

That lock is awesome! Thanks for stress testing it for us viewers.

@blautens 2 жыл бұрын

Impressive cut resistance. As others have stated, now the lock mechanism itself should be tested by The LPL. I'm also torn between safety and convenience - it seems pretty bulky/heavy, suitable only for a true ebike (too much for my analog bike).

@twocansams6335 2 жыл бұрын

Seems like a good lock that you would use on a condo or apartment bike room or rack near your car parking spot.

@jacquesblaque7728 2 жыл бұрын

Please clue me how "analog" applies here, assuming you know what the word means, since you'd clearly be using all your digits on it. (Hands & feet) Might go for un-assisted.)

@TheAnonyy 2 жыл бұрын

put it in your backpack thats where i' have always put my u lock not this hiplock though.

@lisat9707 Жыл бұрын

Depends on how much you value your bike. Honestly this lock will likely be a lifetime of use. So might be worth it. And besides as bulky or heavy as it may be it definitely beats walking out of somewhere and finding your bike gone. A nice bike will be lighter and this lock will protect it!

@hotandnasty Жыл бұрын

It’s right at 4lbs. So not too bad imo. Has an internal size of 155mm x 92mm, external size of 225mm x 155mm, 20mm thick shackle (including protective coating).

@smokeyoldboyable 2 жыл бұрын

You did a fantastic job of demonstrating hip log D 1000 with the angle grinders

@dosadosa112 10 ай бұрын

I haven't had any HUGE issues with this lock yet! kzfaq.infoUgkxfyHDlEqk6hqu9acdvK5NGzZsGKSokSbv It seems sturdy and like it will get the job done. I really like that it has a twisting lock feature to keep out dirt and debris. However, the mounting system is much too light for the lock, and continues to get loose/move around. It's mostly made of plastic parts, and I've had to tighten it a few times in the past week or so that I've had it. I'm worried that it's going to break off at some point while I'm riding. I'm considering just scrapping that part, but that would mean having to carry the heavy lock i my backpack and adding more weight. I wish I could have given this more stars, but without the mounting system, it's just another heavy lock that I have to cart around. UPDATE: Increased rating to 5 stars because the seller offered to provide a new lock and mounting system. Really appreciate the attention to customer service!!

@ozzie444 2 жыл бұрын

Excellent. I'm gonna get a couple of these D1000 locks for my eBikes. At their website they say this lock is around 4 lbs in weight, which is very good for the quality of security it is. Bottom line is it is very, very, very unlikely that a bike thief will have a half dozen high quality cutting discs and 3 or 4 spare fully charged batteries with him that he would need to cut this lock. So yeah, for all intents and purposes this lock is angle grinder proof.

@TeoTewaki Жыл бұрын

how wrong one's assumptions can be...heh

@LateNightFire 8 ай бұрын

Same, im sure once he makes the first cut after like 4 blades and 3 batteries, before realizing he’ll have to cut the other side as well, then do it all over on the second lock.

@Martty55 2 жыл бұрын

You gave that lock a good try, now I know which lock to buy if ever needed, thanks

@cricketmonday1469 2 жыл бұрын

That was just an impresively resistant lock. I love it. Must say that's what I need to keep mom home friday nights!

@sgtfirefighter 2 жыл бұрын

I agree partially with a person who posted previous to me, there is no such thing on the market 'yet' as an angle grinder proof lock. But still it is very impressive, as I own a couple of e-bikes, one worth at least 6 grand (just in parts) I will definitely be looking into this lock! But I do suggest that anyone who values their e-bike also purchase and install a very loud vibration sensitive alarm, GPS tracking and e-bike insurance. The combination of a great lock (like this one appears to be), a loud alarm and locking it securely in a public area is most of the time effective at deterring thieves. Make sure any alarm you buy is vibration sensitive, placed in a spot that is hard to muffle (like under the seat facing up), and secured at a minimum with stainless or coated steel zip ties.

@djcm6326 2 жыл бұрын

kzfaq.info/get/bejne/itx_jZaW1t2bnps.html LOOKS LIKE MID TO END OF 2022 FOR REGULAR ORDERING

@sgtfirefighter 2 жыл бұрын

@@djcm6326 That sucks, I doubt I will remember by then. It's crazy how long it takes once something is done being tested even by people on KZfaq before it comes to market.

@SellingNewYorkCiti 2 жыл бұрын

Could you recommend an alarm

@sgtfirefighter 2 жыл бұрын

@@SellingNewYorkCiti Sure, I tested out several different ones from Amazon and the one I really like is a no name wireless vibration sensitive alarm, that lets you choose how sensitive to make it, link at the bottom. It appears there's an updated version to the one in the link, and the alarm is sold by several vendors on Amazon, you might want to check to see if there's a better price. Test it outside and/or with ear protection it's very loud, and can be overly sensitive on the highest setting. I clicked on your pic, nice videos. I would have never thought to use a hammer on a drill to get the hammer drill effect. And great narration, to many DIY videos are not narrated or not narrated with enough detail making them hard to follow. Keep making videos, especially construction / power tool videos there's not enough of those done by females. In my experience, I find the way women explain DIY / working with tools to be much easier to follow, with a much better breakdown of what they are doing and why. I work with power tools everyday and watch many KZfaq videos on it. I am your newest subscriber, I hope you will make many more videos. If there's anything else just let me know, I have built an ebike and 2 recumbent e-trikes, all high powered. My newest recumbent e-trike tops out at 45mph at the moment, soon to be much faster. smile.amazon.com/gp/aw/d/B07VB86TT9?psc=1&ref=ppx_pop_mob_b_asin_title

@fender1000100 2 жыл бұрын

Good advice. I caught a thief red handed trying to steal my Fiido M1 pro a few months ago. I had only left it for 20 minutes while I went to buy some food. He ran like a scared rat when he saw me. I never leave my bike unattended for more than 30 minutes in public. I have a tracker in it. A very jarring loud alarm. And two bolt cutter proof locks on it. Only someone with an angle grinder might have a chance. And as soon as these HIPLOK d1000s go mainstream. Im getting two of them. I work too hard for my money. To let any low life just take my stuff. To sell on for peanuts to feed their addictions.

@donbrooks8479 2 жыл бұрын

That one tough lock! Great video!

@michaelmccarroll4202 2 жыл бұрын

simple and effective as usual! Thanks for the video

@dsrgarage 2 жыл бұрын

Good deal on not doing sponsored videos and giving honest reviews

@elliottl2916 2 жыл бұрын

Great video. Impressive test

@Hernandez694 2 жыл бұрын

This video is awesome, love your work.

@1motorandy 2 жыл бұрын

Good job testing. I've seen the claims but we weary of them. Thanks!

@warrenscorner 2 жыл бұрын

I am definitely putting that lock in my Amazon wish list!

@warmon6 2 жыл бұрын

Looks like a worthy challenger to the Altor SAF lock.

@davidrim8309 2 жыл бұрын

Wow! If they have a bigger D-lock for Ebikes, I’m definitely going to look into getting one

@keithforbes8482 2 жыл бұрын

Best I've ever seen.. Thx for doing the work of enlightenment!

@jesusacovarrubias1390 Жыл бұрын

Impressive lock. I’m sold .

@gerrywong295 9 ай бұрын

Very impressive lock, and as usual great video too! Thanks

@victrolux 2 жыл бұрын

And from what I understand after you would theoretically cut through one side you actually have to do the same thing on the other side. Now I’ve also heard suggestions that the crossbar part or whatever that’s called might be more vulnerable by drilling into the key area. Either way I have one of these on order.

@WraggyTheGamer Жыл бұрын

from what i have seen from other KZfaqrs you only have todo one side on this lock but im okay with that with how long it takes just todo one side

@larrybowers64 2 жыл бұрын

Thanks Micah, very informative!

@BradFunk01 Жыл бұрын

Impressive lock!

@jss152 2 жыл бұрын

Great review

@mookie1178 2 жыл бұрын

Thanks for video, I have been looking for a good lock👍🏻👍🏻

@ScottLive1 Ай бұрын

Very impressive glad I saw your site

@BullzOfSteel Жыл бұрын

dont forget that the lock is locked on both sides of the shackle, so that means they would have to make two full cuts in order to get the lock off the bike.

@maxmoovin Жыл бұрын

Okay. I'm definitely purchasing this 'U' Hiplock. Badazz hard steel. Great video.

@JG-gj4op 2 жыл бұрын

According to their kickstarter website, the lock is made out of a ceramic composite, which means that it may be vulnerable to a screw spreader attack, as the material is more brittle than metal. Still, in order to use a screw spreader, you have to be able to fit it between the bars of the lock, so if you lock your bike in such a way that there is no room for it, you are still good. Another possible attack would be a hydraulic cutter, which might shatter the material. The LPL has used one of these on steel locks, so maybe he would be able to try it on this one when you send it.

@duMaurier15 2 жыл бұрын

I think it is the same composite as the Challenger 2 tank.

@jacquesblaque7728 2 жыл бұрын

How about "Jaws of Life" hydraulic kit? Rather than BFI (brute force & ignorance) mechanical approaches. Professional bike thieves could easily carry it in their van. And it's QUIET. OTOH, how 'bout we legally mandate VIN code on multiple locations on any valuable vehicle. If you can't fence it, why bother stealing it? Any lock would then be just an inconvenience factor and a "flag" that you're in the wrong line of work.

@BlPlN Жыл бұрын

A hydraulic cutter or simply a hydraulic crimper with a custom die set would probably do it. Likewise, I wonder how it'd fare against a nut splitter if it's a brittle material.

@PhilAndersonOutside 2 жыл бұрын

People mentioning (here, elsewhere) that The Lockpicking Lawyer could likely pick this in minutes, keep in mind he is in the .1% of master lockpickers on the planet. Few, if any bike thieves, even in a city like NY, have his level of skills. Also know, if you see the Lockpicking Lawyer pick this in his home office, that's not the same as being on the street, under potential watchful eyes. Granted, a wizard lock picking bike thief could buy a couple of these legit, learn how to defeat them, then go on a binge picking them.

@Viti50 Жыл бұрын

Sold. Thanks for the video

@johnlynch4990 2 жыл бұрын

Good information on that lock

@barrybateman9857 2 жыл бұрын

Good test! You've convinced me...

@aquariuskiwilog 2 жыл бұрын

I would have wanted to see what happens when you are through, if the lock is still rigid enough to be difficult to open up any gaps on it to be able to remove it from something it is attached to. Because it would be amazing if one would be required to cut two sides of it of, or bend on it even after cutting into one side.

@harrellshomesteadwoodworks 2 жыл бұрын

Came here to say this!

@stinkycheese804 2 жыл бұрын

You will have to make two cuts to get it off, unless one very thick cut and managed to use a pry bar to bend (or crack) it further open. I would call that twice as good but not at all amazing, since if they can complete one cut, they can use same method for a 2nd cut, simply taking twice as long and that difference might be more than enough to make the thief move on, OR it might make them just start cutting the bike away from the lock instead of the lock away from the bike to at least get something for their efforts.

@maxjoey197 2 жыл бұрын

Great video

@alanrose3843 2 жыл бұрын

Wow that is some lock. Nice video.

@joeadam444 2 жыл бұрын

What a beast of a lock!!

@pamlamar1253 2 ай бұрын

Wow! Great video! Good info !

@jamesquigley8628 2 жыл бұрын

I don't remember getting the notice for this video. Good content and Be Well.

@rkirby61 2 жыл бұрын

Wow…make me want to snatch one of these up!

@matthewsmith2432 Жыл бұрын

A key to locking the bike is to place the lock so it's difficult to hammer against the ground. It would not be fixed as it is in this test, so would taka longer still if the test had been in situ

@lostthebox4403 2 жыл бұрын

That is impressive. I would be interested to see how it held up to a single blade, possibly with rubber cut away, then a shot of freon before cooling.

@Silverripples 12 күн бұрын

I am surely buying this lock

@davemeise2192 2 жыл бұрын

Well done. Good lock and great to see how well it stands up to grinders. If a diamond cutting stone was quicker (as some comments have mentioned) I presume it would take too long to make it worthwhile for a thief. Good review.

@TeoTewaki Жыл бұрын

is between 3 to 4 minutes quick enough for you?

@TheRealJerseyJoe 2 жыл бұрын

I have to say, that's a pretty impressive deterrent.

@davidwebber7941 Жыл бұрын

Looks like a genuine deterrent to bike thieves. I think they would look for easier and faster targets. Time and equipment needed would put this way down their list of targets in my opinion. Great demonstration, thank you

@JohnFRr Жыл бұрын

Thanks, great video! I laughed when I saw they claimed their lock was angle grinder proof and figured you were going to quickly debunk it. While I think you could eventually have made it through, using who knows how many blades, it would make a huge scene if you were trying to do this somewhere public. And e-bike thieves aren't looking to make a public scene, so unless your bike is stored somewhere out of sight and sound, I'd say they passed the test.

@geegee8625 Жыл бұрын

I now have a D1000 and now I have peace of mind im certain my bike is going nowhere especially with the motion alarm

@EvenaGirlCanDoIt 2 жыл бұрын

Just WOW!

@Here-2-Learn 2 жыл бұрын

That was five months ago and there’s still a waiting list I wonder if this lock will ever be available

@fabiopistone93 2 жыл бұрын

Nice video 👍

@billd5332 2 жыл бұрын

Did you try this on the Lectric XP before you cut it to see how it fits?

@84nickster84 2 жыл бұрын

love ur videos used to watch it when i was in chicago and u were in israel and now im watching u from israel . im so glad ur doing so well!!!

@noe616 2 жыл бұрын

June 8, 2022 My bike was stolen. I was using a reliable large U lock. The worst thing is the long walk back to my home. This definitely will be my next lock.

@geegee8625 Жыл бұрын

Such is life

@gobenny3348 2 жыл бұрын

That’s a pretty cool lock

@scubatrucker6806 2 жыл бұрын

Looks like a great lock to buy.

@Pelican1Flyer Жыл бұрын

I have to say that is an impressive lock. Wonder how the Folylock Forever would hold up?

@mateii99 2 жыл бұрын

What about alarm lockers? Great work, hope to get the book.

@19jc80 2 жыл бұрын

I've been watching a lot of your battery build videos. You really need to make a video on how to build a battery that follows the shape of the fender of a Onewheel and how to tie it in to the power supply so it functions in tandem with the stock battery. They have all these videos about adding battery packs to the fender, but it makes the board look like it came out of Mad Max or something. Which isn't bad if that's what you're going for, but it just seems like an additional battery that would give 2x the range that's integrated into the fender and doesn't look like some bulging mass would be a huge hit.

@kkibler1471 2 жыл бұрын

Amazing test, but where is the weak point that the crook will get to? Probably where the lock attaches or the lock itself. Please post that video too. Thanks for your wonderful educational videos.

@rogbfishin 2 жыл бұрын

The Lectric XP bike in background is worth locking up. I have 200 miles on mine, use it 3 days a week when I park 2 miles from the office, spends most of the time folded up in back of my Subaru.

@wkrupper 2 жыл бұрын

I'm very impressed, I've cut nearly everything with my angle grinder.

@richardn6588 2 жыл бұрын

was this really a test of the angle grinder blades?

@prwillow Жыл бұрын

The one issue with this is: What would you actually attach this to? any bike-stand, fence or whatever... none of that would be angle grinder proof as well :)

@flolou8496 11 ай бұрын

Yeagh, I'm wondering the same thing after watching the video, which is why I'm worried about spending more than 300.00 for an Ebike, since it seems any one with a little skill and the right tool, could by pass the super lock, by cutting into the fixed bike rack, or fence, but unless you have some other idea, I was wondering what about discouraging a thief by trying to use this super strong lock by locking up the front wheel or back wheel, requring a thief to know how to disassemble one of the wheels, than have to replace it, before tyring to sell it again at there local pawn shop, etc...

@ronspencer6668 2 жыл бұрын

Also, (and it may have been noted elsewhere..) you will have to cut the other side of the "U" as the lock won't just fall apart with one cut-through. A thief will need maybe 15 wheels and two spare batteries? Nice lock. Spendy but nice. Cheers.

@Sputz3 2 жыл бұрын

*Laughs in LockPickLawyer*

@BillWalters-kx8sw Ай бұрын

You can get pipe cutters and cut directly through the pipe that the lock is secured to, I seen it happen the other week lol

@Bryan46162 Жыл бұрын

FYI: There's many different types of grinder blades and they're designed to tackle different grades of metal. They all look identical, but they will have wildly different performance depending on what they're cutting. It would defiantly be interesting to see how the grinder preforms with a blade matched to the material it's suppose to cut. Regardless, unless a thief knows what material the lock is made from, this is kind of a moot point.

@geegee8625 Жыл бұрын

Errr excuse me lad but are you a bike thief

@fiachrabh 2 жыл бұрын

Just curious to what type of blade you chose to cut the lock?

@grossepointemichigan 2 жыл бұрын

That's one tough lock!

@TopSpinWilly 2 жыл бұрын

A rolling pin center would be cool. Thanks man, William in Vancouver

@kurisu7885 3 ай бұрын

I'm lookign at Etrikes again and this lock, if I can find it, looks like a seriously good one.

@christopherrobbins7825 2 жыл бұрын

Totally diggin the vibe. Hopefully I can win a book. Thanks again

@TehNarrator Жыл бұрын

The problem would definitely be the size of the Ulock. You likely wouldn't find any bike post or steel beam to fit that lock on, that couldn't be cut far faster and easier.

@manoz6194 10 ай бұрын

Take off the silicone sleeve to increase the area for locking.

@europainvicta3907 2 жыл бұрын

I saw another uTube vid (I can’t remember the link) where they eventually cut the lock using 7 blades and the grinder was mains powered. They also tested the lock and it was break proof. But they didn’t pick it.

@frigbychilwether 2 жыл бұрын

Hi, interesting but what sort of key is used ? That might be the weakest point.

@lightsoutmedia7370 2 жыл бұрын

My son just texted me today from Cali 6/8/22 and said someone stole his EBike last night that we just got him in February and just ordered him another one and I need this type of lock,and before watching this vid I had no idea ppl would be walking around with angle grinders stealing bikes

@Whatwhat1235 Жыл бұрын

did you use grind or cut disks and you use diamond disks?

@andrewlupton2120 Жыл бұрын

Good video. I think a bike thief would give up after the first cutting disc. I know this lock is heavy and expensive but I guess that's the price you pay for that level of protection.

@Alchemetica 2 жыл бұрын

What if you used a diamond cutting disc?

@newt2010 4 ай бұрын

Whatever that core is made of is insane and eats cutoff wheels for lunch. Thanks for the test

@alanwheatley88 Жыл бұрын

Did you disconnect the battery for safety or did you have to Change the battery as it was flat from the grinding

@onixfurry1668 2 жыл бұрын

I NEED IT!!

@downhillskier7 2 жыл бұрын

Try Diablo metal cutting blade on the Hip lock

@scooterchris410 2 жыл бұрын

WOW NICE LOCK

@kamelsr 2 жыл бұрын

What does The Lockpicking Lawyer say about this lock?

@stephenouma 2 жыл бұрын

Where did you but that lock? Ebay/Amazon does not have it

@RPRosen-ki2fk 2 жыл бұрын

Micah, That was pretty impressive, BUT just like everyone else I want to see LPL attack this. I know he would pick it easily, but I'm more interested in him trying a destructive attack. Great vid.

@warrenscorner 2 жыл бұрын

But he has those special tools that nobody else has. I would like to see him go at locks like your average thief would.

@RPRosen-ki2fk 2 жыл бұрын

@@warrenscorner Yes, EXACTLY. The man has a gift to expose the weaknesses that we miss and thieves know. Micah's test sure makes me think this lock is great. If LPL agrees, maybe we can thwart more scumbags from steeling our property.

@geegee8625 2 жыл бұрын

The LPL IS A TUTOR for bike thieves step by step guide on how defeat and overcome bike lock mechanism, Why do honest bike owners heap glorification on this co conspiratorial SHOW OF

@WhoEls Жыл бұрын

"Keep in mind these are high quality angle grinder discs made in Japan" - LPL after going through like butter.

@carbonunit Жыл бұрын

Might be quicker to cut through the metal pipe the lock is attached too?

@Danny_Elite 2 жыл бұрын

Nice review, I'm glad to see the it was pretty tough to cut through!... -How much of the bike can that lock secure? -The lock looks pretty small, is it able to be secured through the back tire and frame? -And does it come in a longer length?

@18thirty1 Жыл бұрын

Yea the lock is to small.. if u lock this lock around the pickup grip they have on the lectric bike he has in the video or anywhere else similar then the theif would be able to easily saw that part off (frame) which the lock is holding 😢

@hexhead5732 2 жыл бұрын

Nice lock I wonder if a reciprocating saw would cut that with a metal blade

@Stryford1 2 жыл бұрын

That's quite impressive! I hope the lock is just as impressive at being pick-proof. Micah, send that ruined bike lock over to another KZfaqr, LockPickingLawyer, to see how hard it is to pick the lock. If it takes a longer-than-usual time to pick it then I just might buy one! Also, how heavy is that bike lock?