No video
BEST HTC One M8 Screen Repair, Charging Port Fix, COMPLETE
Рет қаралды 339,272
Күн бұрынHere are tools that you need for this phone: amzn.to/1XdJPuA
Here is the SCREEN: bit.ly/1QEVuAS
Here is the BATTERY replacement: bit.ly/1RAPMhl
CHARGING PORT: bit.ly/22198Hh
LET ME KNOW IF THE LINKS STOP WORKING!! Or if you need any other parts!
This video will show you everything you need to know about repairing the HTC One M8 mobile phone that came out in 2014. If you need to replace the screen, the charging port, the headphone jack, the ear pieces, the cameras.... Everything is covered in this video.
----------------------------- If I helped you out today, you can return the favor by following me! -----------------------------
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
GooglePlus: bit.ly/1YyKice
-------------------------------------------------------------------------------------------------------------------------------------------------------------
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
@Adrifut1 5 жыл бұрын
I am 68 years old and it took me going back and forth like 2 hours but I was able to understand your directions and I just wanted to thank you VERY much! You have helped a Senior Citizen to save money ,buying a new phone. Your Parents must be very proud of you! I am!!
@tmadar 8 жыл бұрын
1st phone repair...replaced the battery and the charge port assembly. Success! SO far at least...powers up fine, and the new battery is charging up as we speak. Fingers crossed I did not miss anything, but this was the BEST of the 3 videos I found. The narration really helps! Thanks so much for your video, Jerry! HTC made this WAY more difficult than it needed to be, but it can be done! Yay!!! :)
@RomaniaOverpowered 2 жыл бұрын
So here I am, literally watching an old JerryRig video because I literally needed someone to walk me through repairing an M8 with the red blinking light issue durring a pandemic because why not? This is amazing.
@Newspaperman57 7 жыл бұрын
Dang. Best disassembly video ever. You showed all the same problems i had and how you fixed them and no unnecessary talk, only the important info. Just replaced my charger-port with absolutely no problems in under 30 minutes, including finding tools and this video.
@xZak-A-42 5 жыл бұрын
Is it necessary to remove the battery, the motherboard, etc if I'm only looking to replace the charger port? I want to touch as less things as I can, or else I know I'll create more problems.
@LambdaMiscellaneous 2 жыл бұрын
@@xZak-A-42 nope even though this is from 3 years ago
@xr8752 6 жыл бұрын
Fantastic video. Gave me the confidence to replace my charging port rather than spend big money on a new phone. A bit of time and patience is all you need when instructions and vid are this clear. It's nice to fix things rather than throw them away and waste money on new items when you really have no desire for something new. Thanks!!!
@VladimirLemicah 8 жыл бұрын
Took me 3-4 hours to do, but definitely time well spent to have my phone working properly again! Many, many thanks for this tutorial!
@BURRIT0BANDIT 8 жыл бұрын
Dude, thanks so much for putting this vid together! It helped me fix my M8 :D The issue with mine was: It wouldn't turn on no matter what button combos I did and for how long. When I plugged it in, the depleted battery logo would appear and the orange charging LED would light up, then the screen would go black, and the orange LED would turn off, then go dim, then bright, and the screen would turn on and display the depleted battery logo. I left it charging overnight, thinking maybe a charge would trickle in enough to let me turn it on, but nope. I found this video, replaced my Charging Port and Battery (and cleaned my duo cam lens cover while i was at it), and it works PERFECT now. I can even plug my phone into my laptop and get files onto and off it again!! So again, thanks for this video!!!
@mikesilva2547 8 жыл бұрын
Thank you for an excellent guide! I was able to get the little charging board replaced without much trouble. I ran into a little difficulty on these points: I lost the little black power button when I opened the case...I didn't realize it could just fall out. Found it after a few minutes...but gotta be careful of that! I think replacing the speaker grills is necessary whenever you take this device apart, luckily they're cheap. May as well add them to the order. The antenna wire connectors ( my Verizon HTC M8 has two) were pretty tricky to re-attach, but with patience, not a problem. Again...EXCELLENT guide...More than enough information, some guides don't give enough, and make it seem like it's super-easy. Thank you SO MUCH.
@mikesilva2547 8 жыл бұрын
+Mike Silva After re-watching your guide...you do make a point of mentioning the power button issue...LOL.. I should have watched more than twice before starting. Again, I'll be back next time I need to work on a phone!!! Aloha!
@JerryRigEverything 8 жыл бұрын
+Mike Silva Heck ya! Glad you got it figured out. Thank you for watching!
@mikesilva2547 8 жыл бұрын
+JerryRigEverything Looks like the USB charging port also contains (one of?) the microphones for the phone. My mic no longer works unless I use speakerphone since I replaced the board. I ordered the speaker part, but realized it doesn't contain the microphone before I tore my phone apart again. Do you know of a reputable source for another replacement USB/microphone/headphone jack board?
@jeanettaglass2470 8 жыл бұрын
+Mike Silva How did you finally get those two wires connected (the two at the bottom near the charging port)? I can't seem to get them connected.
@mikesilva2547 8 жыл бұрын
It was really hard... I had to hold it in place with tweezers, and press down with the flat side of a small screwdriver. It's difficult to "feel" when it's aligned right. I ended up REPLACING the little coax cables with spares from eBay. Just to be sure.
@mrfrog8502 8 жыл бұрын
Zack I could listen to your voice all day long. Quite relaxing :-)
@imtherain 7 жыл бұрын
i bet you like dude only hahaha
@armanidavis2843 3 жыл бұрын
instablaster...
@how7132002 8 жыл бұрын
Thanks for the detail instruction! I always bend my charging port and eventually stopped working, which I had to replace one. It works perfectly now.
@brentbeatty4824 8 жыл бұрын
Extremely informative video! Thank you! If my M8 doesn't take a charge, can I safely assume the charging port is the only part I will need to change?
@silveraudio74 8 жыл бұрын
clear, clean and concise... great video!
@JerryRigEverything 8 жыл бұрын
+FIX IT Thanks man! I appreciate it.
@jessykhoury3924 7 жыл бұрын
FIX IT eiieei
@jessykhoury3924 7 жыл бұрын
FIX IT hhhkii8
@jessykhoury3924 7 жыл бұрын
FIX IT ooiiiioiiiiiiiiiiiiiiiiiiuii8
@alanbrown6210 7 жыл бұрын
have mutilated this phone. tore out several ribbon cables removing the tape, broke the sim tray, the sd card holder and who knows what else. got shit falling out when I finally got the back off. never knew glass would bend that much without breaking. you sir have obviously disassembled many phones. I recommend doing exactly what he says. TAKE YOUR TIME!
@stantoncrohm626 8 жыл бұрын
amazing video, i almost gave up trying to replace my screen and digitizer after viewing another video that had me breaking down the phone into more pieces than a broken heart... i just ordered through your link so hopefully you get the credit!
@afiqalbawah4039 7 жыл бұрын
this guy is really cool, he had a very calm hand, at least one hand.. guys, if you're end user, don't do this, you need super calm extreme steady hand, calm and steady hand like a watchmaker's hand.. if you're nervous or had shaky hand, please don't do this, you'll damaged your board.. I already damaged by phone, but lucky I had some insurance to cover my device (currently, courier service are attempting to take my device to repair shop), if you're doing this, and forced to do this yourself, just take your time and relax, get enough rest, meditate and contemplate if you need... I really emphasize this.. if you don't, you'll regret..
@bloodswarms 7 жыл бұрын
Your video was greatness. I used it to replace the charging port and battery on my One M8. The factory charge of the battery had the phone working great, but the new charging port has done nothing to fix the phone not charging. Deepest sadness. :(
@blackham7 5 жыл бұрын
"its nice that htc made it easy for us..." erm overstatement of the century
@lukasjuszczak1664 4 жыл бұрын
Well, it's not glued together, anything that can be screwed is a good design in this trying times
@johntwiltse 8 жыл бұрын
I performed this repair yesterday and the video was very clear and helpful. Problems now are my power button doesn't depress like it should and the rear-facing camera doesn't work. Everything else works fine and the screen looks awesome. I can get the phone to power on & off by pushing really hard on the power button with a coin or something hard. I took the phone out of the housing and made sure I had the power button properly oriented in the case and that the power button / proximity sensor was in place. I repeated this disassembly and reassembly twice, but no improvement. It just seems like there is no "springy-ness" to the power button. Like something is missing? It looks like in the video there is a black square of plastic on top of the power button - which I don't seem to have. The power button / proximity sensor doesn't seem to have much if any adhesive on it, so even heating it up didn't make it stick down very well. Maybe I need to install some double sided tape under it? As far as the camera goes, I checked its connection on the bottom of the board prior to reassembly and it was solid. The rear led light works and the front facing camera works fine. Any advice on either of these problems would be most appreciated!
@OisinOLooney 6 жыл бұрын
experiencing same type of problem my power button seems stuck (or pushed out of place) as the only way to make it work is using something hard to push down the button and still rarely works(is there a replacement power button??) .and phone dies at random percentages(presume i need to replace the battery) .and could you let me know if you solved the problem with the power button ......PS haven't replaced anything yet these problems have acured over time
@skyfighter_64 6 жыл бұрын
Did you put the power button plastic in the right way? It could be upside-down and therefore not pressing on the button.
@menuly 5 жыл бұрын
March 2019 and typing this on my 4 year old problem free HTC m8. Best phone I ever had.
@lorenhusky2717 7 жыл бұрын
Nice video, but I just thought it is noteworthy to anyone doing a charging port replacement only that you do not have to remove the entire motherboard. There's two ribbons and a snap connector. Then you remove one screw and apply some light heat to the charging port board and gently pull it out. There's no need for the other steps if that's all you're doing.
@89gtu 8 жыл бұрын
You saved me bro your detailed re install was it... I changed my screen and didn't connect my battery. ... so when I went to start it it wouldn't boot but it would show it was charging. so I changed my charge port and stressed on this thing for a week and seen your video and that was it..... thank you so much..
@JerryRigEverything 8 жыл бұрын
Glad you found it! Thanks for watching!
@valeciaswanson6680 9 жыл бұрын
great video I have called every local cell phone repair shop to see if they could replace my charger port and they all said the same thing they don't work on HTC One M8's I was ready to give up and go buy another phone when I ran across your video thank you
@briandavis8940 8 жыл бұрын
Best and most straight forward Tut i've ever seen Great job man,
@YpsitheFlintsider 8 жыл бұрын
I was having an issue with the headphone jack not working properly, like a headphone was plugged in halfway. Followed this guide to replace the charging port and now my phone plays audio through headphones well. +1
@negrillinn 7 жыл бұрын
Gracias a su video, le cambie a mi HTC M8 la pantalla , la bocina y el pin de carga. Nunca yo habia destapado un celular moderno. Gracias nuevamente por su aporte..
@maytizevb 5 жыл бұрын
Que bueno, que te fue de ayuda el tutorial.
@thomaswayne3807 9 жыл бұрын
Thanks for the Video....I am having problems with my phone taking a charge....I am going to try and replace the charging port......I will update on progress...parts arrive tomorrow!
@thechop5149 6 жыл бұрын
Thanks much for this video. Guided me to replace battery and charging port with minimal issue. And fix worked great!! Cheers!
@rev.kenshostad2888 6 жыл бұрын
Hi, First off gr8 video... Second, I had to get a replacement phone while still under warranty and the phone they sent looks and works the same as the old phone. However, It seems the wiring is a bit different and the main [motherboard] is different more wire connectors... I didn't take photos of the phone before I disassembled it [Highly recommended] so when I went to put it back together the wiring is different... as there is no place to put photos on here I will try to explain. With the dual camera on the right: there are 5 connections above the camera and a black and red wire connected below. On the Left side top [MB], there are 2 wire connections left of the power supply, 2 wires on the [daughter board] top left. on the bottom left [MB] 3 wire connections one is the black wire going to the bottom right. I have 5 wires to put back [(1)-black 1.5" (2)-white 1" and (1)-grey 3/4"... If anyone know where these wires go or have a wiring diagram please let me know... TY...
@Ahmed-kz9dy 5 жыл бұрын
Thank you Zack! Big fan of your channel. I used this guide to successfully replace my One m8 battery. No issues so far. I have a question though. How does the earpiece receive data and power? It doesn't seem to be connected with any cables or ribbons to the daughter board.
@IzzyRob88 6 жыл бұрын
Thanks! This was a well documented video with clear instructions. I can use my old M8 again.
@yahavrave 8 жыл бұрын
Great video, thanks for sharing your knowledge ! If it wasn't for people like you I'd be walking around with a broken screen for another year :)
@sdg7799 7 жыл бұрын
This was very helpful to see, although I still don't trust myself to fix my phone, it gives me hope that my phone can be fixed (charging port problem) and I can at least understand a bit of what a repairman can tell me about it. Is a fix like the charging port even worth getting to get it fixed? I looked up the pieces, and it seems pretty inexpensive, but if the labor of someone else fixing it costs a lot is it even worth it? I guess maybe I should just find someone who knows what they're doing, or take the time to learn myself. I just don't know if I trust myself to not break anything, haha.
@girl2ninja 7 жыл бұрын
Not all heroes wear capes. thank you so much for this video!
@PureInsanity 7 жыл бұрын
Amazing video Jerry.
@mushy_GLX 7 жыл бұрын
thank you for the video very helpful. I just changed my rear camera but now tuch screen wont work, I am going to take it apart and back again in case I missed to connect something.
@01187s 8 жыл бұрын
My rear camera was dead so I bought a new one, thanks to this video I manage to install a new camera. It was working well but when I was done assembling my M8 back again, now the new rear camera is dead too, just like the one before... any hints?
@roadsector9527 8 жыл бұрын
Very Good sir, how did you learn about this? I'm 34 can I still learn how to repair cellphones?
@JerryRigEverything 8 жыл бұрын
I just kind of fell into it about 5 years ago. You totally can learn still! Ive seen 60 year old guys repair phones. But start with something easier... like an iPhone 5. (Not the iphone 5s.)
@ericrowland1851 3 жыл бұрын
It's never too late. I went into TV servicing in the 60s when I was 35, and made a career of it. 87, now, and retired, but I'm stripping my M8 down, right now, in order to replace the charging port.
@suzydreviewer4611 9 жыл бұрын
Hi Jerry, thanks very much for the video, it was very clear and helpful! The problem you had with the power button falling out when you were reassembling the phone, if you put a piece of scotch tape across the top before taking it apart, the button shouldn't fall out -- a tip I learned from a video explaining how to fix mouse click mechanisms -- those teensy white buttons are something you definitely don't want to be struggling with. :-D Worked great here too. And it might be worth noting that people doing this repair want to get their iSesamo or whatever pry tool between the metal and the raised black border -- I wasn't sure, and scraped up a small bit of the black before it became clear to me. Thanks again! :O)
@Brohymn80 9 жыл бұрын
In the video you recommend replacing the external adhesive strips over the speaker & mic, but I can't find them on the site you link to nor on ebay when I search for 'HTC M8 adhesive' nor 'HTC M8 adhesive strip'. Do you have the link where you found yours or a recommendation of where to get them? (great video, btw! Much more thorough and much easier to follow than the other ones on KZfaq. Thanks!)
@suzydreviewer4611 9 жыл бұрын
+Justin Pearman Hi Justin, you may have already figured this out, but what's being replaced are the actual grilles themselves, and they come with the adhesive already applied -- peel the whole thing off the paper, and simply apply it to the phone after cleaning off the old residue. These are crazy inexpensive -- I got mine on eBay, for only a little more than $3 per pair, looking OEM to my eye, and they had all of the colors available, so I picked up some red ones, along with the stock gun metal grey, and will try that out with my red case -- if it looks tacky, $3 ain't bad for the experiment. :O)
@Brohymn80 9 жыл бұрын
Great! Thanks!!!
@flo4588 6 жыл бұрын
why is it, that you had problems opening it because of all the adhesive and then you snap it back together when you finished at 8:48 ? Is the adhesive unnecessary?
@EriAirlangga 6 жыл бұрын
You sir are TOP NOTCH!
@Allimaniafan2480 7 жыл бұрын
First things first, great video man! So, my Buddy got a totally wrecked One M8s, LCD broken, back scratched, the letters fell out etc. But ist still works. The screen seems to be the same on paper, and so are the case dimensions. Can I use the One M8 parts to fix a M8s? I mean they are pretty much the same phone... Thanks a lot!
@mleindek 5 жыл бұрын
You're the real MVP, thanks!
@peteb4 7 жыл бұрын
Great video really helped,my phone is now charging but will not turn on? any ideas. Thanks
@kingjgregory 8 жыл бұрын
Thank you! I fixed my phone and this video was invaluable. :)
@JerryRigEverything 8 жыл бұрын
+HadoKing Glad I could help! Thanks for watching.
@NytronX 7 жыл бұрын
The first area I tried to pry was near the volume buttons just like shown in the video. It turns out this is the worst area to pry, there is a very thin ribbon cable near the volume rocker.
@dnshshlidrs 9 жыл бұрын
Do you think you could do some simple soldering repair videos? Like the galaxy s3 charging port or something?
@MyTMet 8 жыл бұрын
Can you provide a link to where you can find those metal plates over the speakers?
@idopeled1297 7 жыл бұрын
thanks. great video. do you have any idea what are the two wires (blue and white) connected to the charging port ? are both antenna wires ? if so, which ? I've bought a replacement charging port but there is only one connector solder to it...
@Maxx134a 6 жыл бұрын
Excellent excellent video, thanks for the links for the parts too!
@Misty.293 7 жыл бұрын
I have to replace my screen, Battery and charging port. this will help.
@kwamesefwi 7 жыл бұрын
Hi Jerry, I have taken out all the three screws on the mother but it's not coming out. I looks like something is still holding it tightly. Please help me out. Thank you
@Steve.D 8 жыл бұрын
What is it about the charging port that makes it fail? Thanks for the vid.
@TheRuneChemist 8 жыл бұрын
+Steve D I think it mainly has to do with people using their phone while it's charging. Not having it set right and having the cable put pressure on the port could cause it too.
@mikedcaffey 8 жыл бұрын
+Steve D as a woodworker, dust is always a big issue for me.
@jhajj98 9 жыл бұрын
Hey Jerry, like your videos they r very well detailed. I am attempting to replace a LCD Screen on my iPhone 5. I am in Canada and the links that u provide charge a lot for shipping to my place. So I'll be really thankful if you can provide few other places from where I can order. Preferably Canadian or Amazon links .......I know there a lot on Amazon and eBay but I don't trust the quality of t parts unless you can confirm they r good. Thank you !
@JerryRigEverything 9 жыл бұрын
LakhTek I dont know of any particular sellers on amazon or ebay that I trust. Just make sure you look at the reviews before you purchase.
@ELEVOPR 6 жыл бұрын
Great Video. Do I need to remove the screen in order to replace the volume and sim card ribbon, which are one piece?
@matheuslemgruber2476 8 жыл бұрын
Hello JerryRigEverything, great video, but there is a very fragile gps antenna attached into the daughter board. I would like to know how could I put the back part of the phone again without breaking this antenna, and where it should touch the back part of the phone for the gps works properly, thanks.
@jonjaramillo7656 5 жыл бұрын
Link to the screen replacement part isnt working... Other wise great video... I love my M8!!! Its been a bummer trying to get the factory battery to keep/hold a charge... I had to put it away for awhile n got the htc U11 which im currently using... But now that i know my m8 it serviceable with replacent parts... Im definately goin back to it for sure!!!
@Tobster4588 5 жыл бұрын
It help big time, thanks very much
@irbaaz1 9 жыл бұрын
Hi their jerry, I was wondering if you could make a video on showing us how to separate the digitizer from the LCD on Motorola Moto E. Many thanks Irbaaz Ps: keep up the good work.
@jeanettaglass2470 8 жыл бұрын
Great video! However, I can't seem to recoonect the two antenna wires. Any suggestions?
@bashirarslan 7 жыл бұрын
thanks for the video jerry
@saifalkayed9849 7 жыл бұрын
hey zach first of all great video i wanted to ask is there a port for the power buttons and the volume rocker because mine are busted and i can't find any replacment
@alanbrown6210 7 жыл бұрын
Wait! perhaps not all lost I think the ribbon cables just pulled out of the plug may be just fine. I'll tell you one thing this phone will never look the same not like the one you worked on. Good thing I just got the onePlus 3T my old M8 is taking a beating. I better stick to working on old Chevy trucks I'm good at that this electronics stuff takes patients
@TheEvdiggity 7 жыл бұрын
Does anybody know how to tell if you need the single or double pin for the charge port? The one linked is double but the phone I have is Sprint (32gb, non-HK). On Amazon one that they have says (Single): "HTC One M8 16GB (All Carriers) + 32GB Harmon Kardon Edition" and the other says (Double): "HTC One M8 32GB (Verizon and AT&T version) and HTC One E8." So neither version seems like a perfect match to me. Please help. On IfixIt for Sprint they show the single port: www.ifixit.com/Store/Parts/HTC-One-M8-Sprint-Charging-Assembly/IF285-008 So is that what I should get? Very confusing. Great video otherwise but seems like something that should be covered either in the video itself or maybe in the description.
@camilonasser2397 7 жыл бұрын
att and verizon are double pin,other just one pin, sprint is just one pin
@AmatuerHourCoding 8 жыл бұрын
wonderful, THANK YOU!
@ingram1225 8 жыл бұрын
Mine now has that quirky touch thing along the top part of the screen. When I go for notifications menu the app shortcut below it will also come alive and open up the app. Sometimes it won't let me touch a button within an app if it happens to be in this spot. Worse yet, this is a 6 month old replacement phone as the original one had a battery die. T mobile was going to exchange it but I also had a phantom rear camera lens cracked... With a case on and glass screen protector on front read: the phone didn't bend. So now they want me to send it in for an insurance paid repair... Of $175 and 14 week wait. Screw you. Anyhow just curious if the digitizer is apart of the screen or motherboard?
@senors5045 7 жыл бұрын
Which replacement tape should I put over the ribbon cable connectors as the old tape is no good anymore?
@TecSationce 8 жыл бұрын
Hay nice video, can you show how to replace Power Button ? much people with htc one m8 have problems with this, because its get broken very fast.
@juntjoonunya9216 6 жыл бұрын
I'm finding 1/2 copper foil tape online. Is that what you need to replace the silver tape?
@whitephoenix_oftheecrown7608 6 жыл бұрын
amazing thanks, cant wait to do it ..
@ebrimAa1 7 жыл бұрын
very very usefull thank you keep it on
@buenmin799 7 жыл бұрын
thank you so much. helped me a lot!!!
@kentang8910 7 жыл бұрын
Hi sir, is the quality of this screen just as good as the original one? I just got a replacement screen and the quality sucks. finding a good one to replace it again.
@trose22k 8 жыл бұрын
does the motherboard and sister board have to be from the same device for it to be compatible?
@tabels1969 7 жыл бұрын
Great Job, thanks a lot!
@parcehttahw 8 жыл бұрын
There's a lot more glue in the actual thing than shown in the video. The tape is also put on differently - it wraps around the cables so you can't just take it off like he did.
@lilly647 6 жыл бұрын
Hi would you know if the power button is replaceable or not?
@Lewiseyers 8 жыл бұрын
i did this repair ...just the chargeing port with ease,................ but on re assembly i now always get a message that theres no sim in the phone ...phone worked fine before... all i did was remove mother board and charging port and reaassemble...... any ideas were the problem is ....ive solved one and created another
@austin1943 8 жыл бұрын
+lewis eyers I have this exact issue. Have you found a solution?
@austin1943 8 жыл бұрын
+lewis eyers Make you sure you check the flex cable going to from the sim reader to the daughterboard. turns out I wasn't careful while taking off the rear case and stabbed a small hole in the cable with my knife. This was enough to make it stop working. You have to replace the entire frame which has the microSD reader and sim card readers built into it....
@CedricCheah 8 жыл бұрын
Hi Austin, which flex cable you replaced? Mine look goods but having this problem.
@austin1943 8 жыл бұрын
Well, I replaced both because I went ahead and bought a new frame/screen assembly which has the simreader and microSD reader built in. The readers can only be accessed by removing the glass/lcd from the frame so its just easier to buy a new frame for what it's worth
@ValenNitto 7 жыл бұрын
Cedric Cheah might be late now but give that sim card tray a little push down, I had the same problem but figured giving a little push might help have a better contact and it worked!
@noelceballos3710 8 жыл бұрын
do the parts listed above work for the AT&T version?
@pldarrozal 7 жыл бұрын
Hi Jerry. I have a problem with my M7. I can't pull down the notification bar. But I can do so when it's in landscape orientation mode. I did a line test and I can't draw a line on the top part of the screen. What do you think is the problem?
@InternetScoutTV 8 жыл бұрын
where can i buy the replacement metal parts that cover the speakers?
@shanewatts1785 6 жыл бұрын
It won’t be long and he will probably be a celebrity 😂
@stantoncrohm626 8 жыл бұрын
hi jerry, thanks for the video. i followed your guide and replaced my faulty screen and its working now but my phone says no simcard . what could be the problem, any suggestions
@haydenyim 4 жыл бұрын
Is your sim card in
@juntjoonunya9216 6 жыл бұрын
The area around the Sim of the back cover isn't snapping over the phone. How do I know it's not going to break if I press harder?
@MrResns 9 жыл бұрын
why you need to replace the vibration motor as well?
@markjay05 9 жыл бұрын
Do you sell that shielding tape?
@PingusGaming 7 жыл бұрын
I'd advise to disconnect battery cable first before disconnecting other cables...
@morodo12 9 жыл бұрын
the blue wire cable going to the charge port piece what is it for ? replacement part for the mic/charge port did not have the part for the blue wire cable
@ingram1225 8 жыл бұрын
also, very well made video. thank you.
@tylerribeiro4973 7 жыл бұрын
what will cause the camera to be inverted ... after fixing the charging port ?
@ericschmoll6308 7 жыл бұрын
great video, but i tried to pry too thin and destroyed my screen.....phone turns on now, but total blur.
@gotzolones 3 жыл бұрын
Hi; I have done the Htc One M8 process of changing the charging port and battery and when I turn on the grainy pixelscreen appears, as when the signal is lost on the TV. You hear how it starts but you can't see. Any help as to why that happens to him? .Will I have moved the lcd screen when lifting the motherboard? It worked fine before. It was turned off by the battery the last time I saw him alive. Thanks
@Fab-Ribeiro 4 жыл бұрын
Can we change the micro usb to a usb type C? and can I change the battery for one with large capacity is in the alliexpress selling I don't know if it is good
@emiliocalmettueros7829 5 жыл бұрын
How can I get the dual camera to replace it? Where can I get it? I´m living in Brazil, and here they don´t sell this cel.
@arungeorge5497 7 жыл бұрын
hi,bro i would like to know whether the phone loses its finishing after repair ??
@zainershad2207 9 жыл бұрын
hey! I actually need the part andd all tools to replace the USB/Charging port! anddd I didn't see any in your video, but there isn't any soldering involved, right? Please and thank youu!
@JerryRigEverything 9 жыл бұрын
Zain Ershad No soldering needed! I linked the charging port in the video description. Thanks for asking!
@MayerK101 9 жыл бұрын
Is there a difference between a 6525 model and a 831c model HTC m8? Because everywhere I check they sell replacement screens only for 831c models and I have a 6525 model. Thanks.
@Zeeshan-Syed 6 жыл бұрын
I need volume rocker buttons. Please provide link of it.
@iralinaro 7 жыл бұрын
very very goooddd, love it...
@yaminisantosh886 3 жыл бұрын
Hi. I use HTC one m8. My phone switches off once I remove it from charging. So now a days I'm using it while charging. Should I get the battery replaced ?
JerryRigEverything
Рет қаралды 3,1 МЛН
Hugh Jeffreys
Рет қаралды 6 МЛН
AH Mobile & Refrigeration
Рет қаралды 18 М.