I've got the Yamatic, I've had it about a year now & happy with it (although I've always got FoMo about the Flexzilla) i haven noticed the snapping, I'll have to check for that. Thx for the video. Nice to hear a new voice as opposed to the 3 that KZfaq always pushes on me.

This is the 2nd video ive watched from your channel and i gotta say i like your content i like it that you don't over talk the subject, ive liked and subscribed to your channel.

I started my business from watching you and buying the stuff that you recommended and all I have to say is that everything works and pairs so beautifuly with each other. I was gonna say for your next video, you can piece together the best setup for a wet vac with a professional extractor attachment (rip clean). Just throwing that out there for a video recommendation 👍🏽❤

The flexzilla and uberflex both have the same patent. They may be made by the same mother company

I've had Flexzilla it used to coil up and cracked I've just gotten regular water hose after that

Uberflex and Flexzilla are the same hose, Uberflex owns the patent the only thing Flexzilla owns is the rights to the light green color

I’m had the Uberflex hose and it got stuck under my tire as I was walking around the vehicle and tried to pull it away and it kinked and water started squirting out and didn’t work good at all after that but I used it like every week for about 8 months and never had a problem before that

YAMATIC UPDATE : So far the cracking has not effected performance of hose. I couldn’t say it was the winner but I also couldn’t NOT recommend it based on how it has been performing. I’ll keep you all posted.

For the info thank you Autoheadz…in a yoda voice

Flexilla and Uberflex are the same, but Flexilla comes in more sizes.

Uberflex makes flexzilla. Both are made exactly the same except Color.

I bought the Yamatic 50 foot hose and it was a little more than half the price of the 50 foot Flexilla and Uberflex. A great price for a really good hose.

Not sure why everybody likes the Flexilla hose. I've had it for a couple of years, bought it cause I thought it would look cool with the Ryobi pressure washer, but it's been one of the most frustrating hoses I've ever used. True it may not kink, and it is strong and has held up well, but this thing coils like crazy and gets caught on everything. I have to continuously turn the hose for it to uncoil. Having said that, I don't lay it out in the sun for an hour to warm up which I agree probably would help, but I live in L.A., so I'm not in cold weather here. Maybe it's me and I'm asking too much, or maybe I just got a bad hose, I don't know, but I just want to be able to grab a hose and start working, which is something I can't do. I know you mentioned that to be fair you were going to lay them all out in the sun for an hour, which I get, but I'd like to see how the hoses do if they're not laid out in the sun for an hour and see what hoses are easier to work with. With regard to the two hoses being the same, it has been pretty well investigated and shown they are the same, even sharing the same patent number, I believe, although I could be off on that as it's been awhile since I heard it. There are other KZfaqrs out there who have really looked into it. Lastly, however, I will say, however, that I have also been very impressed with my Ryobi pressure washer. I've put it through the paces, and it has kicked butt for several years now. Small but mighty.

i have the Uberflex with a mtm hydro pressure wash gun with built in stainless swivel not cheap i cost more than the hise but i don't get and kinks or coiling by using it. tip to all...when storing your hose pull hose out straight first always and remove your gun from quick connect then hold hose up in the air and coil it up by stretch arms out grabbing by bottom as far as you v can reach arms apart, coil and pull one hand to the next, and repeat creating a 3 to 4 ft loop it will have less memory and will drain the water at the same time. 💪 or just put it on a retractable reel like i do now easiest way to preserve your hose and keep it nice for years. oh slso try not to just drop the ends on the ground this will degrade it fast

Dang bro.. wish you had tried that Fierce Jet hose

What kind of PW? Ryobi 1800? Mini wand orifice size? So sorry, just realized it's in the discription. Had to edit before the Internet destroyed me

why does my flexzilla stick together? when i pull it stays coiled and tangled.

The Yamatic hose sucks on memory curling and it is MORE expensive than flexzilla and uberflex.

Really expensive.