BEST RC Car Tool Setup | Protek RC Ultimate Racing RC Target

Рет қаралды 28,929

Күн бұрын

My Old Setup - bit.ly/3wKYl6H
New Ultimate Bag and Tools I just got - bit.ly/3sQwu42
BeachRC - bit.ly/3LxfpCB
Favorite Tools (Updated):
Protek Drill Tips - bit.ly/324wX58
Protek Hex Drivers -
Protek Nut Drivers - bit.ly/2NSjfLc
Compact Set (Basher tools) - bit.ly/2GhibQC
MIP Thorp Drivers - bit.ly/2GKSIwu
MIP Thorp Nut Drivers - bit.ly/3irCJEs
Dewalt Electric Screwdriver - amzn.to/3jGn3wI
Oil Bag (Must have) -
Save 10% on cleaners at cowrc.com using coupon code "MSM"! - bit.ly/3LdWI71
Jet Blasters - bit.ly/3l66WeX
Awesome wipes that I love - bit.ly/3N7KBJU
My Newest RCs:
Arrma Granite 4x4 MEGA - bit.ly/3wFzwt9
The NEW Traxxas Bigfoot with LED Lights - bit.ly/3FNEkkf
THE NEW Traxxas Rustler VXL - bit.ly/3y5DZrh
NEW HD Kits - traxxas.com/products/parts/9080X
Traxxas Rustler 4wd -
Arrma Talion EXB - bit.ly/37m3h9C
HPI Sport 3 Flux Audi Etron - www.hpiracing.com/en/kit/160202
Traxxas Sledge - bit.ly/3IvCuEi
Arrma Fireteam - bit.ly/3wLFqu6
Get MSM Merch Here! msmvlog.com/
Thumb Steer Wheels for the Traxxas TQ Remotes - bit.ly/3uE3oGf
Best Beginner RC Car:
Slash - bit.ly/39TMvdu
More Great First Hobby Grade RC Cars
Traxxas Stampede - bit.ly/3FeULEY
Arrma Granite 4wd - bit.ly/3JdyABt
Arrma Senton 4wd - bit.ly/30NEk3x
Traxxas Slash 4wd - bit.ly/3ecHH7h
Traxxas Rustler 4wd - bit.ly/30SeLyu
Latrax Prerunner - bit.ly/33IwJEF
Latrax Teton - bit.ly/37EFIX0
Axial SCX24 - bit.ly/3CAC4e8
Traxxas Bandit - bit.ly/32i4ZFY
Slash Builders Kit -
My Top Electric Bashers (Updated):
Tekno MT410 - bit.ly/2XUWURu
NEW Traxxas Maxx -
Traxxas E-Revo 2.0 - bit.ly/2twJfVV
Traxxas Hoss - bit.ly/31U4Pkl
Traxxas Rustler 4x4 VXL - bit.ly/3xfBIqB
Arrma Vorteks 3S BLX - bit.ly/2Pdh9d9
Traxxas Slash 4x4 Ulitimate - bit.ly/2Xogh6j
Traxxas XMaxx 8S - bit.ly/2X6Liuu
My Crawler Scale Rigs:
Traxxas TRX4 -
The cars I race at the moment with complete list of all the hopups and components
bit.ly/3gVNKy7
My Race Vehicles:
Tekno NT48 2.0 (Nitro Truggy) -
Tekno ET48 2.0 (Etruggy)-
Tekno EB48 2.0 (Ebuggy) - bit.ly/2uhtUsI
Tekno SCT410.3 (4wd Short Course Truck) -
Tekno NB48 2.0 (Nitro Buggy) -
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
My Son’s Race Vehicles:
Tekno EB48 2.0 (Evan) - bit.ly/2uhtUsI
Tekno EB48.4 (Ethan) - bit.ly/2GLnkOg
8th Scale Race Electronics:
Speed Control (all) - bit.ly/3dm7RCM
Must Have ESC Fan -
Motor (eBuggy) -
Motor (eTruggy) - bit.ly/3a8vfBL
Motor (Short Course) - bit.ly/3bdg9es
Recommended Servos:
Protek 170SBL (Best Race) - bit.ly/2yBiuif
Protek 370TBL (Best Crawler) -
Protek 155T (Best Basher) - bit.ly/37N08tN
Protek 130T (Better Basher) - bit.ly/3bVCb6L
Protek 100T (Good Basher) -
Hobbyking 15298B (Super Cheap) - amzn.to/2HJKe8Y
Want RC tech support, help promoting, or just want to support the channel? Check out my Patreon page:
/ marksantamaria
Join the “MSM Drivers Meeting” community! bit.ly/35jlZuR
Save money watching my vlog:
www.tonyscoffee.com - My favorite race coffee Tony’s Carmelita 20% off with coupon code “marksantamaria”
rcbodyarmor.com/ - Save 10% with coupon code “MSM10”
www.macscdp.com/ - Save 20% on orders $25 or more “MSM20”
www.racecraft-usa.com/ - Save 5% using coupon code "MSM5"
www.cowrc.com/ - Save 10% using coupon code "MSM"
Want to send me stuff to review or show off?
Mark Santa Maria
6710 Virginia Pkwy Ste 215 PMB 69
Mckinney TX 75071
Follow me on...
Patreon Page - / marksantamaria
Instagram - @themarksantamaria
Facebook - / themarksantamaria
KZfaq - / marksantamaria
On The Tone Podcast - / onthetonerctt
Music by Joakim Karud / joakimkarud
Music by: @dcuttermusic www.davidcuttermusic.com
DISCLOSURE: Links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase.
#rccar #msmvlog #rcvlog

Пікірлер: 74

@thesteelefamily6845 2 жыл бұрын

Hey Mark, I have this bag. Ive had it for just over a year now here in NZ. I have been racing for 2 years. Zip is still going strong with no issues. I've tried lots of different bags and boxes and this is the perfect tool bag. I am not a fan of the fabric/canvas pit bags so I'm building a ultimate pit box from plywood.

@dennisnothstein1311 2 жыл бұрын

Back when I was a kid in the mid 80's racing my tamiya Blackfoot with my brother,we carried our stuff in a fishing tackle box. When I got back into the hobby in 2019,I just did the same thing when I needed something for my tools and some spares when I go out bashing,I just got a tackle box from Wal-Mart but I have to admit,your new bag looks really nice. I just might have to check them out and upgrade from my cheap box

@GAYPERGANG 2 жыл бұрын

I use a fishing tackle box! Works great for me! There is tons of space to section things out in!

@ericpeterson9676 2 жыл бұрын

Thank you, I just got the bag itself.

@bobbylefebvre6298 2 жыл бұрын

Really nice set up i like

@vanenmar7491 2 жыл бұрын

I'm also obsessed with cases and bags for things haha. I use an EDS tool bag with pretty much all my EDS tools in and then a Plano fishing tackle box for everything else

@mike-yc8bi 2 жыл бұрын

Sold out already that didnt take long lol good review was definitely interested

@bobbylefebvre6298 2 жыл бұрын

Enjoy the week

@bobbylefebvre6298 2 жыл бұрын

Cool bag that's a good deal all day

@bigtrev71 2 жыл бұрын

Thanks for sharing Mark. That bag is sold out already to on the beach rc site....lol

@MrGdbsti05 2 жыл бұрын

i carry two tool bags and small stanley plastic tool box they dont make any more but rc tool storage is a great topic. my brother carrys two bags and a backpack for his rc tool solution

@1eightrcracing 2 жыл бұрын

Great vid Mark I've been looking for a new tool bag and I had to pause the vid and order one from beach rc. My old bag was falling apart which I had bought from an electronics store it lasted for 2 seasons 😪

@midwestboss8808 2 жыл бұрын

I like Arrowmax , check out the black and gold special edition case with tools, it's primo

@waynetate9895 2 жыл бұрын

I use a Plano tackle box repurposed from fishing to rc. It's big and clunky, but it keeps me well organized and carries replacement parts for a couple different models. All labeled and separated. I've given consideration to switching over to a Milwaukee pack out system but the price is high and the dolly isn't very good, or so I keep hearing.

@nitrojunkie2675 2 жыл бұрын

I love those. I also use a old edition Plano fishing/RC box. It’s perfect with drawers and plenty of compartments and storage

@GarageLifeRC 2 жыл бұрын

Love me some beach rc

@BIGoshkoshbgosh 2 жыл бұрын

Good seeing you at the swap meet Mark (son riding the rc)

@audio6652 2 жыл бұрын

Man you should make your own bag I bet you can do really good job and people will by it think about 👍

@bluegroovemodelsports9650 2 жыл бұрын

Good tools

@hondofourfivetwo9347 2 жыл бұрын

I was originally an automotive technician by trade but I was never a tool snob with the “I only buy SnapOn MAC etc” mentality my first automotive teacher and a few mentors instilled the buy the best tool you can afford and depending on how often you are going to use it credo. The other one was what’s a cheap tool? “Well if they won’t put the brand name actually on the tool itself then it’s a cheap tool and you don’t want it” So ok just had to put that out there first as to not come off as a complete MIP fanboy. I literally am still using my Thorp tools I purchased back in the 80’s (which are the ones currently made by MIP for those that don’t know) Ive since added the rest of the metric MIP lineup to that, I’ve never had to grind down a worn down tip and I’ve only broken one tip ever (which was an 0.50) and that’s because I was using it to drive a roll pin out so not the tools fault it broke. 🤷‍♂️ I actually do have different tools that go to the track because the only other reason I’ve had to replace a Thorp/MIP wrench is because it walked away from my table and never came back 🙄 I’ve got a mix of Losi nut drivers Team Associated hex wrench’s some specialty Hudy tools (remember best tools for the job….) including their 1/4 dr bits because I actually like those better than the MIP ones. I use some small Akro Mills boxes 1 box has literally just what I need on my bench at the track the other two have my full-size hex wrenches and nut drivers with a 4th holding my TS100 soldering iron it’s power supply and accessories (that all usually stays in my bag) then some similar but smaller boxes each with stuff like setup tools then grease bearing oil etc, another with misc tools… I’ve got a standardized type of parts box for each car as well and I can swap all these boxes depending on what I’m running but keep everything modular and still organized it’ll all usually fits in that small Proline tool bag or in one the small crates.

@YOOPDLRC 2 жыл бұрын

Wow 👍🤩👍Perfect ~~~!!!!!!!

@New2Kendo 2 жыл бұрын

I prefer MIP, they are all I use at this point, I use the MIP to get the screw seated then a Tekton hex key to finish torquing down the screw. The Tekton hex keys fit good, and I haven't stripped a screw in a long time. I replace them every 6 months to a year depending on wear. I haven't had to replace an MIP in a few years. I never use electric drivers, I know if you set the torque correctly you shouldn't have an issue, but I like being able to feel how the screw is going in, if it hits a tight spot, and it's just my preference. I only run 8th scale Nitro Buggy so I am not doing a ton of wrenching, if I was running 3 or 4 classes I would probably have no choice but to use an electric driver

@pilu305 2 жыл бұрын

Mark, your several emails actually were one email, on 08-24-2021. Your dislike of what you call "our customer service" boils down to the fact that we did not engage on your request of an affiliate program in exchange to promote our product on your channel. We did answer your message but I guess it never reached you. On another note, i am glad overall you like our bag. We have plenty for different applications.

@Shagoracing Жыл бұрын

Hi Paolo, when will you have RCtarget toolbar in stock again?

@tlcustoms7054 Ай бұрын

I got one nice bag

@beng.6417 Жыл бұрын

Your energy on this video is a lot greater than one from the electric screwdriver comparison video. lol

@alfredyost7972 2 жыл бұрын

I have Team Integy tools. I also have Vanquish tools and MIP tools. I like them all. They all have good things and bad things about them. I use a fishing tackle box to carry most of my tools. Thoughts ?

@bryanallen7373 Жыл бұрын

I wonder if the protek replacement tips will fit in my old Duratrax handles.

@fishnrc294 2 жыл бұрын

Honestly I think you should design your own tool bags with logo on it I bet it would do good.

@thomaswalton9089 3 ай бұрын

Man when I started this hobby 4 weeks ago I never realized I would need like another 500-1000$ to get tools glues oils grease torch drills cutters cases work bench or table lol etc not to mention extra batteries spare parts this is getting expensive and I don't make much money 😢

@chunx374108 2 жыл бұрын

They almost look like mugen seiki handles with a red end cap they look nice though let us know how they hold up I need a set for bashing

@bobbylefebvre6298 2 жыл бұрын

Good afternoon brother

@reallifetony2642 2 жыл бұрын

I need a bag like that. Currently working out of three totes. Lol

@MarkSantaMaria 2 жыл бұрын

When you start to travel a lot you find ways to minimize… hahaha

@reallifetony2642 2 жыл бұрын

I travel in my rig as of right now and I usually always have 3 rc’s with me. But also having the totes for each car with extra parts and tools, it takes up quite a bit of space on my Semi. I am in the process of downsizing the amount of stuff I haul with me. So this might work and maybe only take 2 cars. Lol. I got a first gen emaxx rustler Vxl and a team associated pro4 sc10 with me. Maybe I’ll drop 2 at the house and bring a rock crawler.lol thanks for what you do and keep up the grind. We appreciate it. 🤙🏽

@ryan_orley Жыл бұрын

Any update on the tools after some use now ?

@Shagoracing Жыл бұрын

After using RCtarget and UltimateRC tool bags, which do you prefer or which one do you think is the best one aside the customer service?

@rcjoe406 2 жыл бұрын

Old red Milwaukee cordless tool bag that outlasted the tool lol

@damonwheeler7538 2 жыл бұрын

Will the WalMart sectioned plastic box fit in the bottom?

@Ronnaferd 2 жыл бұрын

Something like that would be perfect!

@storyracing387 2 жыл бұрын

I do believe you picked this particular bag up at Wicked Weekend last year sir 😁

@MarkSantaMaria 2 жыл бұрын

Yes sir! Hahaha

@storyracing387 2 жыл бұрын

@@MarkSantaMaria can't wait to do it again this year!

@meanf1502 2 жыл бұрын

Mark that second truck under the proline banner is that a 3.3 revo

@MarkSantaMaria 2 жыл бұрын

Yes… i have about 10 too many… hahaha

@bashrc4121 2 жыл бұрын

Do you ever worry about traxxas lipos catching fire or exploding when there not in lipo safe bag.

@davidchennellsjr.6799 Жыл бұрын

Where do I get the colored collars for my protek trutorque tool. Just bought the sets

@p_hat 2 жыл бұрын

milwaukee packout!

@kevinpurvis8311 2 жыл бұрын

are you gonna make it to wicked weekend?

@lawells3 2 жыл бұрын

Dang! Went to purchase, and they were out of stock already!

@hamface3810 2 жыл бұрын

Hey Mark! Been following your content for about a year now and it's been awesome! 👌 Anywho I have a slash ultimate and a brushless rustler 4x4 ( among others lol) and I was wondering if I should switch the shocks and put the GTR shocks on the rustler 4x4 since I bash it? so it can handle the harder landings and put the ultra shocks on the slash ultimate since I usually only jump it to softer landings while racing? What would you do?

@jjhardie449 2 жыл бұрын

I can answer that my friend because my oldest son has the 4x4 vxl Rustler. YES! Do the GTR shocks it saves allot of landings and suspension parts, not to mention it saves the front and rear diffs from taking the chassis slap those cars have. Also put the Integy front aluminum control arms on it as well as the Traxxas rear CVD metal drive shafts. It will rarely break again especially if you are bashing it. Keep an eye on your bearings though,keep them clean and WD40 ( or a bearing lube)after every bash. Just me trying to help out. It still has not broken any parts and he is not scared to send it. Have fun and keep the smile on your face even if it breaks.

@MarkSantaMaria 2 жыл бұрын

Yes! The gtr shocks are my favorite for that platform.

@R6Bandit88 2 жыл бұрын

No video on the hobbytown swap meet this past weekend?

@MarkSantaMaria 2 жыл бұрын

Next week… my videos are about a week back

@jasonjones4891 2 жыл бұрын

bag is sold out:( I want one.

@myleslaneRC 2 жыл бұрын

Mark! Wb the 1up rc bag???? Check it out!

@crombie1792 2 жыл бұрын

5 gallon pail works for my tools 😂

@hellofromsoutheastalaskarc7517 2 жыл бұрын

Hello from southeast alaska. How's your day. I just started putting videos on KZfaq. What do you use to hold camera to controllers. My video are jumpy from holding phone and trying to steer at the same time.

@MarkSantaMaria 2 жыл бұрын

I drive with one hand… haha! Check out the thumbsteer wheels in my description

@hellofromsoutheastalaskarc7517 2 жыл бұрын

@@MarkSantaMaria yeah I don't have Traxxas rc tho. My RC's have no thumb steering

@bobbyrector2879 2 жыл бұрын

Hey Mark I been watching your video here for the past year and half I was wondering I got a Revo Platinum and want to replace the servo and thinking I'm go to get the Traxxas Blue 330 servo they would be a lot better then the old ones I'm going to get two of them the power pack battery that comes with the platinum would run them or can run a Lipo battery for them, and I really in joy wacth your videos they help out a lot keep it up MSM Nation.

@MarkSantaMaria 2 жыл бұрын

One 400 servo should work just fine also. 2 330s would be awesome though!

@bobbyrector2879 2 жыл бұрын

Ok thanks I in joy your video a lot

@makewithmegma 2 жыл бұрын

💕🔥👌👍

@mitymike 2 жыл бұрын

I carry my tools around in a paper shopping bag 🙃

@TheC0Ed 2 жыл бұрын

Milwaukee Packout all the way will out last all others

@kevinpurvis8311 2 жыл бұрын

you didnt get any candy ?????

@joeleonard643 2 жыл бұрын

You are a very bad person Mr Santa Maria because I really need that ultimate racing tool set now and it’s not even available in the uk!!😂😂😂

@happytrailsrc 2 жыл бұрын

Lol "OUT OF STOCK"

@arthopfer 2 жыл бұрын

Someone’s getting a bump in sales.

@tharusbradley4651 Жыл бұрын

Dude, please slow down when you are saying your name🤣🤣

@AerialFidelity 2 жыл бұрын

you edited out the fart for sure

@AlexReyes-kr9ee 2 жыл бұрын

That Ultimate Racing Tool Bag had more misses than hits. It looks weak, zipper looks cheap, tools, eh, so… so… other tool bag with the horrible customer service was more to my liking. But since they never responded to you, I fear purchasing anything from them and having the same experience as you.