Best Right Angle Adapter? Milwaukee vs DeWalt, Milescraft, Westward, Auto Tool Home, Yakamoz

Рет қаралды 1,390,017

2 жыл бұрын

Adapters: Milwaukee (2 models), DeWalt (4 models), Milescraft, Westward, Autotoolhome, Yakamoz. Right angle attachments/adapters tested for performance under load, use with impact tools, temperature increase under load, maximum torque, and overall durability. Finally, the adapters were dismantled to assess cause of failure. I buy all of the products tested to ensure unbiased results. So, thank you for supporting the channel.
➡ OZZIE'S COFFEE: ozzies.coffee/
Motor oil videos on this channel bring out the funniest jokes about “Project Farm’s coffee”. So, I decided to surprise everyone by creating a new coffee brand, Ozzie’s Coffee. As you can probably tell by how fast I talk, I like coffee. Thanks again for supporting the channel.
➡ Thank you for supporting the channel through memberships:
/ @projectfarm Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
DeWalt with 12 inch Shaft: amzn.to/3lQi5RJ
Milwaukee 49-22-8510: amzn.to/3rUn47P
Milwaukee 48-32-2390: amzn.to/3GBuW2u
Milescraft: amzn.to/3rRh7c1
Yakamoz: amzn.to/3lQIcby
Autotoolhome: amzn.to/3pSnlpw
DEWALT (DWARA120): amzn.to/3IQhRnV
Westward: amzn.to/3Gz6TB3
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 4 700

@johnnycoolguy9554 2 жыл бұрын

Such a good idea, and clever tests as always. Can't believe this content is free. You're doing the world a great service. Thank you.

@ProjectFarm 2 жыл бұрын

Thank you very much! I absolutely love the freedom to test products without ANY pressure from manufacturers.

@chch242 2 жыл бұрын

We are paying by watching the ads. I'm not bashing the channel, PF is awesome, just correcting the "free" part.

@thetube4424 2 жыл бұрын

it's not free you pay for your phone plan. and home internet plus you have e to not look at commercials 10 times in a video and you waste your valuable time.

@jamesleesley 2 жыл бұрын

Very true. Great point.

@erikkovacs3097 2 жыл бұрын

It's not free. You're the product.

@DavidLarson15 2 жыл бұрын

As the sole designer/engineer/R&D employee of the Milescraft one I'm happy with how it held up. It was literally the first thing I designed in my career. *shrug* Love your videos. Keep it up.

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@LordSaliss 2 жыл бұрын

Time to design a new version that is impact rated? :)

@mihailo90 2 жыл бұрын

Be proud my man. How's your career now?

@DavidLarson15 2 жыл бұрын

@@mihailo90 Great, still designing consumer products. Absolutely love my job.

@flannelbeard4621 2 жыл бұрын

@@DavidLarson15 loved reading this comment. Keep it up

@aaronmendoza9232 2 жыл бұрын

I really appreciate how he uses practical tests on theses brands. He doesn’t show any kinda favoritism. Honestly 100% appreciate your work.

@peterw1534 2 жыл бұрын

This guy is the king of unbiased product testing. A national treasure. You're doing gods work my man!

@ProjectFarm 2 жыл бұрын

Thank you!

@UDX4570PalmSprings-yh1mv 8 ай бұрын

He gives UL laboratory a run for their money!.🤠👍

@herculesrockefeller8969 2 жыл бұрын

The words that strike fear into manufacturers: "we're gonna test that!" Great test, thank you!

@ProjectFarm 2 жыл бұрын

Thank you!

@Keith_White 2 жыл бұрын

Whenever Project Farm buys 2 of everything and says 'we're gonna test that' multiple times you know things are going to get spicy. He never disappoints.

@ProjectFarm 2 жыл бұрын

Lol, Thank you!

@khaliluddinlassiter 2 жыл бұрын

You ain't neva lie! Lol I enjoy these videos

@textman09 2 жыл бұрын

Never a truer statement

@antonhan4815 2 жыл бұрын

Exactly what I thought too

@yodab.at1746 2 жыл бұрын

I took a shot every time the word screw was said... I'm now seeing double 🤣🤣🤣🤣

@Nemozoli 2 жыл бұрын

Thanks for the review! I have had the $59 Milwaukee for more than ten years now. It was quite pricey (for me), but I like sturdy tools with longevity. The adapter has helped me out of lots of (literally) tight spots, and continues to work flawlessly to this day! I have performed three flat renovations and a complete family house refurbishment with it during these years.

@UpInYourFeelings 2 жыл бұрын

I've had mine since very first release which has to be nearly 20 years old now. The investment is so good that I won't think twice getting a new once mine finally gives up.

@ottomatix3397 2 жыл бұрын

Likewise former pool and spa technician, and I'll also have to say it's a game changer.

@ktleyden 2 жыл бұрын

It’s the same one I own got it about 10 years ago and it works today

@Doubledge Жыл бұрын

Have you used it to drill through wood with a paddle bit?

@paulinadeluca9117 2 жыл бұрын

Best channel on KZfaq. You don’t understand what kind of a hero you are. Finally someone putting brands to serious tests! We work too hard to blow our money on garbage.

@ProjectFarm 2 жыл бұрын

Thanks!

@electronicsNmore 2 жыл бұрын

A very useful and low cost adapter to have on hand. Nothing like a good tool torture test. :-) Thanks for the great testing video! A++

@ProjectFarm 2 жыл бұрын

You are welcome!

@houwant 2 жыл бұрын

@@ProjectFarm do a review on brushless DeWalt and Craftsman tools... Since they are both owned by the same company. One is definitely cheaper than the other and is it all just branding that makes the difference??? Impact drivers, regular drills... I mean even their job site stacking tool boxes are interchangeable.... Including the radios? So is it over hype to buy DeWalt?

@JT-rq7nt 2 жыл бұрын

@@ProjectFarm Thanks for the videos! Any plans to find out which 3/8" socket set is best? Would love to see you putting non-impact socket sets to the test by looking at their max torque before they break, corrosion resistance, and ability to withstand impact use, etc. I'd like to see you compare Tekton, Milwaukee, and whichever others!

@corysavage609 2 жыл бұрын

@@ProjectFarm thanks!

@jimmyk7616 2 жыл бұрын

@@ProjectFarm you should do testing on space heaters.

@jwboilermaker 2 жыл бұрын

When Project Farm says, “We’re gonna test that!” He doesn’t mean just a little wear and tear, he’s gonna destroy it for the viewers to see what to spend their hard earned money on 👍

@ProjectFarm 2 жыл бұрын

Lol, Thank you!

@CannonRaw 2 жыл бұрын

Would be fun to see him test blenders and the like.

@Sevalecan 2 жыл бұрын

This helps him get rid of all those extra tools, break the crappy ones! ;)

@coloricanking Жыл бұрын

Every time I'm shopping for tools/accessories, I just know Project Farm has a video to help. If a brand I'm considering isn't in a PF video I usually end up not getting it and choose one of the PF recommended products. This channel provides so much value, not just financially but also in entertainment. I am a hobbyist and independent motorcycle mechanic. These videos are a godsend and have helped me greatly in saving me time and money. I can't thank you enough for what you do.

@ProjectFarm Жыл бұрын

Thanks and you are welcome! Thanks for sharing.

@richardclark8520 2 жыл бұрын

The thoroughness of your tests are most impressive. And I venture to say you have saved people hundreds if not thousands watching your videos. Always enjoy watching them. And your sense of humor adds to that enjoyment.

@ProjectFarm 2 жыл бұрын

Thank you!

@korg47237 2 жыл бұрын

Considering this was a torque test more than anything, I have to say that dewalt flex shaft is perfectly fine when it's general use, such as my last job where I worked on vehicle interiors. A lot easier to deal with a flex shaft over a static position right angle adapter to get hard to reach screws and bolts.

@tarstarkusz 2 жыл бұрын

Using the right tool for the job. Personally, I don't like these stress-to-fail tests. This is not really how most tools die.

@Chad_at_Big_CAT_Networking 2 жыл бұрын

It's definitely more for light duty use than high torque. I blew mine apart trying to use it to drill 1/2 in holes in the top of a wall frame. If you've got it full speed and it's not perfectly aligned it likes to bind and spin like a pin wheel, with a sharp bit on the end!

@RevelationAV 2 жыл бұрын

@@tarstarkusz how do most tools die?

@nikogarcia3249 2 жыл бұрын

As an electrician, the flex shaft is junk

@tarstarkusz 2 жыл бұрын

@@RevelationAV They wear out and some die due to fatigue. Fatigue is not the same thing as push to fail. Push to fail is going way past the design limit. Fatigue is where the tool dies well within spec.

@alandaters8547 2 жыл бұрын

Thank you for having the inset box with a picture of each tool as you went over the graphs! That saves going back for visual checks. I think build quality and the screw and bolt driving are the most useful tests here. The max torque tests are interesting, but you could almost always use a wrench or socket and breaker bar to loosen very tight bolts anywhere a right angle drive would fit.

@deth3021 2 жыл бұрын

I think it indicates how much headroom you have with the device. The more over spec it is, the longer it will likely last. This is where the whole test to failure concept comes from. Unless you break it you don't know where it's limits are.

@ProjectFarm 2 жыл бұрын

Thank you!

@ZunarZulfiqar 2 жыл бұрын

There came a time where I had to use a drill, one of these adaptors, about (3) 12 inch extensions, and a 3/4 spade bit to drill holes through ceiling joists to run a wire for a recessed lighting. My flexible drill bit did nothing. A huge amount of torque was required. At one point, the shaft for the spade bit snapped. Still, the adaptor remained strong.

@nervocalm 5 ай бұрын

Two years later still one of the best videos (if not the best) I have seen on the subject! The ONLY ONE that includes such important detail as the measurements of each device. Kudos and thank you guys!!!

@ProjectFarm 5 ай бұрын

Thanks and you are welcome!

@123ATank Жыл бұрын

I know these videos take so much time and money to do but they’re so satisfying to watch and extremely helpful in purchasing. I already pretty much knew I was going to get the Milwaukee 8510 but this video solidified my hunch. Thanks!

@ProjectFarm Жыл бұрын

Thank you!

@maxcactus7 2 жыл бұрын

I had no idea such a tool existed, but it definitely looks like I need one now and know which one to buy. Thanks, Todd!

@ProjectFarm 2 жыл бұрын

It's a "must have" tool at times. Thank you!

@carlos2071 2 жыл бұрын

I picked up the dewalt one that came in free on a bit and drill kit that costed anywhere from 9.99- 14.99 at Home Depot for BlackFriday.

@jeffreywolf5235 2 жыл бұрын

I got that Milwaukee $60 right angle drill bit about two decades ago when it was still only $29. And it still holds up very well today. With moderate to heavy use

@ProjectFarm 2 жыл бұрын

Nice!

@thearizonian9500 7 ай бұрын

Very common Milwaukee W

@Marvin-fn7ks 2 жыл бұрын

I have said it before ,”You are the Man !” Its so great to have someone taking the time and effort to adequately test these products!

@ProjectFarm 2 жыл бұрын

You are welcome!

@c182SkylaneRG 2 жыл бұрын

I'm glad I watched to the end, and I, as with everyone else down here, really appreciate the thoroughness of these tests! I've been using the Dewalt 60 for drilling wiring holes in the upper and lower wall plates. I finally had the gears give up on me, with the debris preventing the mechanism from turning at all, and had to purchase a replacement, for which I bought the same one again. Drilling seems to be relatively heavy-duty for these adapters, but they still make it infinitely easier to drill 90 degrees to the wood in places where the drill simply won't fit, as opposed to the electrician I hired who used an extremely long straight drill and said "just guess the angle, and try not to miss". In his defense, I think he'd be going through a 90 degree adapter every other day.

@ProjectFarm 2 жыл бұрын

Thank for watching and sharing!

@antaholics 2 жыл бұрын

Love the couple of small but super helpful improvements you made!! - testing multiple common models of each brand - showing the video in the corner of which model you're talking about when going through the chart. Before I always had trouble following the comparisons since they're not in the same order chart by chart. Thank you!

@ProjectFarm 2 жыл бұрын

Thanks!

@dirtydurbin3673 2 жыл бұрын

Test portable ac units for tool battery changes

@whitesturgeon 2 жыл бұрын

I've carried a Dewalt 60 in my tool bags for years after destroying numerous other brands while steel-stud framing. It's compact size and durability make it my best option. I found one at Home Depot on Black Friday this year with a set of tips for $10 I'm giving to a co-worker for Christmas.

@LemonySnicket-EUC 2 жыл бұрын

I have bought several in a kit as well that had other bits and driver tips as well. 12.95 for me.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@danielgreen112 2 жыл бұрын

I bought that same set this year. Great deal considering they sell it alone for $20!

@tenagestr 2 жыл бұрын

This channel has become a staple before I buy tools and accessories. I recently watched your video on impact bits before purchasing a set.. best set of bits I’ve ever owned. Thank you!!

@kenday7942 Жыл бұрын

I’ve come to like your tests and find them to be more meaningful and more scientifically designed than most I see on KZfaq. You’re one of the few channels to which I have subscribed. That being said, I would really like to comment on your voice and delivery. My gosh, you would make a good sportscaster or calling horse races or probably even an auctioneer. Very good and very fast delivery and clear and very understandable.

@ProjectFarm Жыл бұрын

Thanks! Thanks for being a subscriber!

@Damndru 2 жыл бұрын

The two phrases guaranteed to make my day: "We're going to test that!" And "Very impressive!" Thanks as always for your videos!

@ProjectFarm 2 жыл бұрын

You are welcome!

@minato4203 2 жыл бұрын

Don’t forget “That’s a lot of damage!” My girlfriend says it all the time now lol

@not-a-raccoon 2 жыл бұрын

When I was an auto glass tech, these things were indispensable. I still have my Milwaukee angle driver from 10 years ago. Also, from watching many of your videos, both DeWalt and Milwaukee seem to really care about what their name gets attached to. Can't go wrong with either brand.

@ProjectFarm 2 жыл бұрын

Good Point! Thanks for watching!

@D3M3NT3Dstrang3r 2 жыл бұрын

I think your right in most cases. Unfortunately though when they have their misses they are usually very bad which is confusing to me. It causes me to considering to look elsewhere sometimes. But hey that is why we love @Project Farm because he does all the testing for us so we don't have to guess at it lol.

@not-a-raccoon 2 жыл бұрын

@@D3M3NT3Dstrang3r yeah I agree. But they tend to be smaller tools/less critical items. Like I had a Milwaukee utility knife that was a steaming turd. But their main line tools or specialty tools tend to be very good quality.

@TheHeadincharge 2 жыл бұрын

@@not-a-raccoon Which knife did you get? Their fastbacks are amazing IMO.

@not-a-raccoon 2 жыл бұрын

@@TheHeadincharge I forget, but I didn't like it at all.

@ffrob2001 2 жыл бұрын

Thank you very much for taking the time to make this video. You saved me a ton of time researching and indo truly appreciate it!!! You earned a subscriber today. This is the first video I have seen you make but you were so through and did such a great job I look forward to watching more from you

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome! Thanks for watching and subscribing!

@johnnybagofdoughnuts4193 2 жыл бұрын

Great job coming up with relevant and arduous tests for these right angle tools.

@ophirb25 2 жыл бұрын

Oh man, what would we do without you. The real life scenarios are what makes your testing so relevant to whoever need the test specific application. Thanks for the time and effort.

@ProjectFarm 2 жыл бұрын

Thank you!

@Handyman247llc 2 жыл бұрын

Very impressive test. It is nice to see the increased amount of information including the pictures of the brand from the chart. I have used the Milescraft driver for about 5 years now, It has worked very well with no noticeable issues. I have used a off brand and still have it (It is at 45 deg angle, works well servicing candy machines, but has early proto technology-sloppy gears) The high priced Milwaukee seems to be made very well and if I need a long term HD 90 deg adapter that seems to be the one. Thank you again for the increased information and the many products you take to the extreme abuse limits.

@ProjectFarm 2 жыл бұрын

Thank you!

@TheJohnnyef9 2 жыл бұрын

I was at the salvage yard removing a stereo off a Honda and needed a 90 degree driver to remove some bolts and a screw. I struggled using an offset screwdriver and a 1/4in ratchet in a tight space. Here I am again watching your videos to get phenomenal feedback on your test. Thanks!!

@ProjectFarm 2 жыл бұрын

You are welcome!

@paulmcconachy3340 2 жыл бұрын

Fantastic, as always... enjoyed your update of showing the tool you were talking about when showing graph results... Much Appreciated

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@kboxvegas5393 2 жыл бұрын

Always look forward to these Sunday tests and project farm never fails to deliver! Thank you so much for what you do

@ProjectFarm 2 жыл бұрын

Thank you very much! The kind comments mean a LOT to me!!

@HamiltonvilleFarm 2 жыл бұрын

Great comparisons. Well done 👍

@ProjectFarm 2 жыл бұрын

Thank you!

@Mark6o4 2 жыл бұрын

@@ProjectFarm M M M M Mm M M M M M M M N Mm Mmmm Mom Mmm Mm I O On kno L I’m M M Bmbb

@Mark6o4 2 жыл бұрын

Q be q mmmmmm mmmmmmmmmm mmmmmmmmmm mmmmmmmmmm Mmmmmmmmmm Mm Mmmmmmmmmm Mmmm oo

@Mark6o4 2 жыл бұрын

@@ProjectFarm L

@WayneTheSeine Жыл бұрын

You put them through their paces, for sure. Such content is such a great benefit to the buying public. No bs and answers all the pertinent questions. Thank You!

@ProjectFarm Жыл бұрын

You are welcome!

@JudgeBuster Жыл бұрын

I'm a tradesman & this guy is one of the very best for the most thorough tool & accessory tests. Saves me a lot of money and wasted time. Very few other tool test channels even come close. The rapid fire no nonsense narrative is amazing. But Tool Torque Test is also excellent

@ProjectFarm Жыл бұрын

Thanks!

@laumuseka 2 жыл бұрын

Thrilled that the Dewalt 60 made it through the showdown! I’ve used that model at work for a couple years now and it’s a great little tool. Great review as always!

@SaneAsylum 2 жыл бұрын

Strange that it didn't get his nod for durability given it was the only one that didn't overtly fail.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@RoofysGarage 2 жыл бұрын

It used to amaze me how consistently the Milwaukee tools were at or near the top of each test. Now its come to be expected, and this one was no different. Great job as always!

@ProjectFarm 2 жыл бұрын

Thanks so much!

@mOOOp42 2 жыл бұрын

I used to work for Milwaukee Power Tools as my first job out of college and they do make quality stuff. The major thing that I noticed is that they have field research teams that go out to jobsites and asks real contractors and laborers what could make their day easier or their tools work better and they take all that information to make the best tool the can for the price. The tools are still made in China but they really do put in a lot of real use research by asking the people who use the tools the most what they can improve.

@walterbrunswick 2 жыл бұрын

@@mOOOp42 as long as they pay their assembly workers fair wages...

@mOOOp42 2 жыл бұрын

@@walterbrunswick So technically they don't have any assembly workers similar to how Apple manufactures products. They hire a third-party assembly company similar to the likes of Foxconn (the manufacturer of all Apple products) to manufacture all their products overseas.

@textman09 2 жыл бұрын

@@mOOOp42 that's cap. I've been doing construction for 5 years never been approached by a Milwaukee rep. My boss has been for 50+ says he's never been either.

@mlw636 Жыл бұрын

Glad guys like you make tests like this. Helps us tradesmen greatly.

@ProjectFarm Жыл бұрын

Glad to hear!

@lefty91454 2 жыл бұрын

I just love your videos! This has been a go to site for me in buying tools. This is a great service you provide. Keep up the good work!

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@newtome-jessegates6310 2 жыл бұрын

I didn’t know these even existed 6 months ago, now I reach for these all the time. I’ve used them to drill holes in tight spaces (with hex keyed bits) tighten and loosen fasteners in places that would usually require an extensive amount of time to get to otherwise. Probably the most useful is the screws that hold on the wheel well of Chevy Silverados when we need to remove a bumper.

@ProjectFarm 2 жыл бұрын

Thanks for sharing. Glad to hear!

@redrocket5183 2 жыл бұрын

remember going gaga when saw/got a grandaddy of these 40 yrs ago...miss it a lot...lost in the housefire,along with the rest of the tools,last nov...it took the firetruck 30 min to go from the fire station at the top of the hill to my house at the bottom of the same hill, go figure...if this mechanic fixed cars the way these guys do their job, we'd all be walking...plus you cant sue the fire dept here in canuckstan

@matthewjbauer1990 2 жыл бұрын

The Dewalt 60 (or similar) regularly comes as a bonus item in impact bit kits. I got mine in an impact drill & driver kit. It is good for what it is and I've had no issues with it. Since I needed the bits, I consider it a free bonus. And you can regularly find the bit kits with Dewalt 60 on sale for cheaper than the Dewalt 60 by itself. I use a Ryobi one+ HP impact driver (not with a HP battery) with this and it works great. I recommend the Dewalt 60.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@aisforannihilation1662 2 жыл бұрын

I got that kit too near black Fri for $10. That's why I got it. Great deal for bits & adapter. Can't say I will b beating the crap out of it so I'm sure it'll b fine. Just a nice bonus item for hard to reach areas

@henryk6424 2 жыл бұрын

Only bad part is taking the bit out…only comes out with pliers. Its set in little to far

@Bremend 2 жыл бұрын

Same, I snagged that bundle for the right angle adapter with the bits as a bonus

@jasonpatzke 2 жыл бұрын

@@Bremend Mine has a little hole in the back to poke the bit out with a #1 phillips or anything smaller than that. I do have an older version though (about 2012).

@junebug7972 2 жыл бұрын

Wow, wow, wow!!! The quality of this comparison video is immaculate. And as a data nerd, I highly enjoyed the bar graph comparisons. Whew! With so many choices on the market, thank you so much for taking the guess work out of the selection process!!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@inndeep7020 Жыл бұрын

Thank you for these tests. You save me money and aggrevation. Awesome channel.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@therealdojj 2 жыл бұрын

Oh wow, just noticed the corner shot of the item being talked about That's a great addition 👍

@ProjectFarm 2 жыл бұрын

Thank you for letting me know. I'll try to do that more often

@randomizer1355 2 жыл бұрын

super cool video! you always put so much efford in your videos! you also compare and test them very well!

@ProjectFarm 2 жыл бұрын

Thank you very much!

@Bahndit 5 ай бұрын

Amazing video. Thank you so much for your suite of test and how quickly you get through them all in your video

@ProjectFarm 5 ай бұрын

Thanks! You are welcome!

@FluorescentApe 2 жыл бұрын

Your channel is greatly appreciated! One thing i love about your videos is that i don't need to Google every measurement you make! :)

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@morbiddinosaur 2 жыл бұрын

I really like the thumbnails of the product being visible while you do the data recap. It makes it much easier for me to follow, thank so much for all your hard work.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome! Thanks for the feedback.

@ppot8 2 жыл бұрын

perfect timing, I was just reading reviews to determine which one to get. Thanks for all the hard work you put into testing. Nothing worse than a tool that breaks on day 1 of the job.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@Azaduur 2 жыл бұрын

I busted one of those plastic milwaukee angle drivers, teeth on the tapered gears sheered off. I believe it made about 20 or so 7/8 holes through wood with a diablo paddle bit over the course of several weeks. I wasn't upset, each of those holes wouldve been hell without it, didn't regret the 25 bucks. Replaced it the same day it broke, next day I saw the heavy duty milwaukee angle driver at a Ferguson in town, and it's been a life saver too. You put these things through more hell than I ever will, thanks for good science.

@ProjectFarm 2 жыл бұрын

You aree welcome!

@gregsappington9991 2 жыл бұрын

I enjoy all your videos!!!!!! Thanks for everything you do for us!!!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@ernestkao5923 2 жыл бұрын

Nice timely review of angle adapters, I was looking at them on Amazon and your review helped with my decision making. I love how you pushed them to breaking, since most of us won't have the time and budget to do so on our own.

@ProjectFarm 2 жыл бұрын

Thanks! Glad I could help.

@stevenp6033 2 жыл бұрын

Was literally just looking at these hopping you’d post a video about them😂 love the videos man. Thanks for all the work you do!

@ProjectFarm 2 жыл бұрын

Perfect timing! Thank you!

@aamershaikh6409 2 жыл бұрын

Thank you for all the hard work....I can imagine the amount of time and effort that went in to this fantastic comparison... worth every bit of it.

@ProjectFarm 2 жыл бұрын

You are welcome! Glad to hear!

@rterry2752 2 жыл бұрын

I have the 8510 Milwaukee , built like a tank and i love the handle. Your videos are fantastic, love how thorough you are,

@ProjectFarm 2 жыл бұрын

Awesome! Thank you!

@Chad_at_Big_CAT_Networking 2 жыл бұрын

The flex shaft Dewalt can be a sketchy situation if you don't have a good hold on that head and you're drilling. I was using it to do electrical work and drill 1/2" holes in wall headers where the roof made it a hard to reach area. If you're not holding on to that head it will kink and spin the whole thing. The all metal fixed version is much easier to control in awkward positions where you're likely using these.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@WebWheeler 2 жыл бұрын

I've abused the heck out of my Milwaukee (expensive one) for 10+ years for bolts and screws with impact drivers/wrenches. The adjustable handle has made it worth every penny especially when drilling holes at weird angles. Great video as always!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@clayreal 2 жыл бұрын

Another flawless Test. You bring joy to my life Man!

@ProjectFarm 2 жыл бұрын

Thanks!

@brianchrisman4331 2 жыл бұрын

I just had to do a 3.0 toyota valve cover job. Two back bank bolts broke off. Right up against the firewall. I bought a Dewalt 120 and it literally saved the day and drilled out the bolt, so I could retap. These things are amazing! What a lifesaver! I will probably grab an all metal Milwaukee one after seeing this test!

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@HeWearsGlasses 2 жыл бұрын

I literally have been looking to get one of these the past couple visits to the store but haven't pulled the trigger, perfect timing! 👍🏼

@ProjectFarm 2 жыл бұрын

Perfect timing!

@v.e.7236 2 жыл бұрын

These adapters are worth their weight in gold when you're working in cramped auto interiors. I own both the Milwaukee units, but Dewault looks like its a good choice as well. Great job, as always, Todd. P.S. - How are your forearms after the screw driver workout? Can you fold a frying pan yet? lol

@Jonathan_Doe_ 2 жыл бұрын

I still don’t understand how he didn’t put himself out of action with the scissors test, I would’ve had an RSI for a month.

@jonny555ive 2 жыл бұрын

@@Jonathan_Doe_ Haha, no kidding, I'm sure he's still having nightmares about it. Great video.

@dans_Learning_Curve 2 жыл бұрын

I've mentioned that I don't want to arm wrestle any time soon in one of his videos! Still true today!

@mikealba3729 2 жыл бұрын

Dewalt's have a discount right know at Homedepot, 14 dollars and comes with more impacts bits.

@JLopez661 Жыл бұрын

All your reviews are thorough and impressive. You've earned a new subscriber.

@ProjectFarm Жыл бұрын

Thanks! Thanks for watching and subscribing!

@KXKKX 2 жыл бұрын

Thanks! I'm sure other viewers had requested this, but this was the only request I ever made. Awesome, and it cuts through so many puffed-up sales claims.

@ProjectFarm 2 жыл бұрын

You are welcome! Thanks for suggesting this video idea!

@adamjames1375 2 жыл бұрын

I've used several brands over the years. The basic Dewalts have served me the best. For my application of mostly tek screws in sheet metal, or various wood screws, their balance of size and durability have worked the best.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@andrejwalilko634 2 жыл бұрын

I was interested to see a comparison on circular saws (7-1/4"), hope that's on your radar! You've helped me make a lot of good choices on tools like impact bits, slip jaws, and tape measures :)

@ProjectFarm 2 жыл бұрын

Thanks for the video idea.

@Cobyc5150 2 жыл бұрын

I just bought a makita 36v 7-1/4, I really excited to see the results!!

@jacksmith2315 2 жыл бұрын

@@Cobyc5150 the rear handle/hypoid or the sidewinder/standard saw? Either way, both are great saws. The rear handle is more powerful but obviously heavier. The gears on the hypoid are basically a hybrid of a worm drive and sidewinder, hence being call a hypoid. Worm drive his more powerful than sidewinder, but sidewinders are more efficient. Hypoid you get the best of both worlds, just slightly less powerful than a worm drive.

@jacksmith2315 2 жыл бұрын

Andrej, i thought he did a comparison or circ saws. May have been the 61/2, but not 100% sure. I just remember seeing him test circ saws a while back

@td1487 2 жыл бұрын

Thanks for all your videos. KZfaq did me a solid and recommended this particular one after I spent ages searching online for different brands. (didn't think you'd have reviewed this cheaper side of things). Subscribed now and this will be my first stop to validate any future tool purchases! Would be good to see something on hand tools (ratchets, spanners) to understand durability of metals etc

@ProjectFarm 2 жыл бұрын

You are welcome! Thanks for watching and subscribing! Thanks for the video idea.

@treybreal381 2 жыл бұрын

I really like that you put the picture up of the tool on the chart board when rating them.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@mattwilliamson1714 2 жыл бұрын

Fantastic video! I was looking to get one of these in the next few days 0:24 Pic of all products used in test 5:27 Timed results chart (deck screw driving) 5:41 Weight of test products 5:56 Side to side measurements of products 6:06 Front to back measurements of products 9:50 Timed results chart (3 Lag bolts) 10:08 Temp increase chart (3 Lag bolts) 11:59 Temp increase chart (3 min of use) 13:36 Max Torque Test (in PSI) 14:42 Removing lug nuts (torqued to 100 ft lbs) 14:55 Test to failure (135 ft lbs and using Earthquake) 16:07 Overview

@Rincon009 Жыл бұрын

This is one of the most legit & useful channels on KZfaq!

@ProjectFarm Жыл бұрын

Thanks!

@stuartkorte1642 2 жыл бұрын

Perfect timing. I was considering buying one of these this past weekend. Now I know. Thanks!

@ProjectFarm 2 жыл бұрын

You are welcome!

@charlesdarwin4780 2 жыл бұрын

Always well done with informative and unbiased view points. Thank you for saving me more mistakes in choosing my products, you're a true hero to the average Joe. Thanks again!

@ProjectFarm 2 жыл бұрын

You are so welcome!

@tekturtle 2 жыл бұрын

Love to see you test ratcheting wrenches, especially the flex head ones. Unfortunately I doubt you'll be done testing before I get a set, but always glad to see how my tools hold up to your tests anyway.

@ProjectFarm 2 жыл бұрын

Thanks for the suggestion.

@taytd 2 жыл бұрын

Awesome test! I really loved the breakdown of the internals. Keep it up, plenty more like Makita, RyobI, and others to add to this test group. You really are my favorite channel. Keep up the amazing work! Every tradesperson I know watches your videos.

@ProjectFarm 2 жыл бұрын

Thank you!

@todd8155 Жыл бұрын

@@ProjectFarm - I am considering buying the "AUCO Durable Right Angle Drill Attachment Adapter, Impact Fit, Max Torque 500 in-lbs (56.5 Nm), All Tough Metal Body and Steel Gear" as available on Amazon. Looks to be similar to the Milwaukee 8510 for $20 less. Would be curious to see how it holds up!

@wildefox1478 2 жыл бұрын

Great video, definitely a pretty handy tool to have for getting in tight spaces, pushing the tools to failure with torture testing is always great to see!

@ProjectFarm 2 жыл бұрын

Thanks!

@pliniopires5513 2 жыл бұрын

wow! What a beautiful and scientifical work! Thank you from Brazil.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@Bryan-df7kc 2 жыл бұрын

It’s always a treat to see the tool you own being tested up against other brands. Thanks Todd! 👍

@ProjectFarm 2 жыл бұрын

You are welcome!

@geeoye 2 жыл бұрын

This guy never begs for “likes and Subscribes” but still has a large number of people subscribed to his channel. Excellent work!!

@ProjectFarm 2 жыл бұрын

Thanks!

@everperez8538 2 жыл бұрын

Another great video. I love Milwaukee power tools. This channel has helped so much in my tool purchases. Went with Milwaukee over snap on for the small impact wrenches.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@tylerclontz 2 жыл бұрын

“Before the gears got into a shouting match” love it! Thumbs up 👍🏻 great content

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for watching!

@TropicalRegicide 2 жыл бұрын

A lot of different brands make flex shafts, i feel like that should be it's own video. whatever the case, i enjoyed this. i use the milwaukee (cheaper one) almost daily, it's worked great for years now.

@ProjectFarm 2 жыл бұрын

Great video idea!! Thank you

@anotherrandomtexan25 2 жыл бұрын

I second this idea! Would love to see the limits of those flex shaft versions

@thatsborpheus 2 жыл бұрын

@@ProjectFarm to add to this idea, I'd like to see which adapters have the least play (for example, turning carb adjustment screws in hard to reach places, which requires accuracy and little slop), and if there's any difference in ability to drive/remove hard to reach hardware (I break lots of exhaust manifold studs that are hard to reach). Drive some screws behind an obstacle and see which adapters are more likely to cause cam out?

@tonybloomfield5635 2 жыл бұрын

I have had the $60 Milwaukee for about 8 years. It is a beast, still as good as when it was new. The little handle helps big time in many situations.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@frequenttuna4819 2 жыл бұрын

so just as useless as the day you brought it? lol

@tonybloomfield5635 2 жыл бұрын

@@frequenttuna4819 Ha Ha!🤣🤣🤣🤣

@jordydereus 2 жыл бұрын

Thanks. I just bought the 8510! Thanks for all you effort.

@ProjectFarm 2 жыл бұрын

Nice! You are welcome!

@natebontrager3006 2 жыл бұрын

Don’t ever quit doing these videos. Love them!

@ProjectFarm 2 жыл бұрын

Thanks so much!

@ashasixz6627 2 жыл бұрын

Would love to see a comparison between carb cleaners or electronic cleaners in a can. I use them daily to clean almost anything not just carbs or electronics but glue on plastic that alcohol can't get of and acetone will destroy the plastic surface. Please consider this

@ProjectFarm 2 жыл бұрын

Thank you for the video idea!

@misterbungle3251 2 жыл бұрын

Great video as always! Timely, too. I just bought a right-angle adapter for my Dremel 400 series rotary tool, and I am loving it, so I suspect an RAA for my drill will not be far behind. Also, if you haven't done one on this tool already, I'd love to see a comparison of digital calipers!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the suggestion.

@ObiwanNekody 2 жыл бұрын

Lots of comments are about the destructive tests, which seems to overlook the speed tests and the torque test, which give a pretty good comparison about how well the tools would preform in lighter duty tasks. Thanks for the test, this video got posted just before I decided I was going to get one of these for a cousin as a new house warming gift, as I have found it an insanely useful tool in replacing previous owner's DIY specials with your own.

@xamphoa 2 жыл бұрын

I really enjoy how much effort you put into these reviews. Impressive and thank you!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@shawnbledsoe4909 2 жыл бұрын

I just ordered the Milwaukee tool based on your test results. Thank you for all the tests. They have proved to be valuable to me a few times now. Very time consuming for you I’m sure. I would be interested in seeing a comparison on larger coolers for hunting/fishing/camping for an extended period of time. Are the newer ones worth the $$$ or traditional ones good enough? I would also like to see a comparison on torque wrenches if possible. Keep up the awesome videos!

@ProjectFarm 2 жыл бұрын

Thanks, will do! Thanks for the suggestions.

@PetrosArgy 2 жыл бұрын

I've been using the Milwaukee 8510 for years now and it's a real workhorse. I have no fears throwing a 1-1/2-in spade bit in it and drilling through pine, poplar or oak joists or beams. The adjustable handle is prone to coming loose, so you have to be careful storing it in your pocket and walking around. I've lost parts on it that way when the screw handle came out and the adjustment pieces scattered around. This is definitely a case of "you get what you pay for."

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@PetrosArgy 2 жыл бұрын

@Ross Radford In soft studs you should be able to drill 3/4 inch holes all day long. The only thing you need to be careful of is hitting nails. That can cause the drill to twist in unexpected way and can be dangerous (I got my finger jammed really hard between a stud and the drill once when the whole thing twisted and locked up on my finger). It's actually safer to drill with an impact since it won't twist when the bit jams.

@norm5785 Жыл бұрын

Thank you for sharing, stay warm, safe, happy and healthy. From Henrico County Virginia

@ProjectFarm Жыл бұрын

Thanks so much!

@AvengerAdventure 2 жыл бұрын

I really like how you push the tools to their failure point !!!! Great Work Project Farm. Love your videos....

@ProjectFarm 2 жыл бұрын

Thanks!

@jcims 2 жыл бұрын

This was great! Milwaukee has been my goto recently for power tools but their smaller tools seem to be hit and miss. Like the fact that they have a solidly built almost commercial grade product available for retail. Just to throw yet another idea on to the list, floor jacks might be interesting. There's a lot of weird brands, they vary greatly in price, some have major ergonomic issues, creep and clunky letdown. Would love to see the project farm pit stop...carry a 5 ton floor jack from the garage to the back of your truck and get the wheels off the ground haha.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the suggestion.

@TimeLapseRich 2 жыл бұрын

I have trashed my fair share of floor jacks. The only on I've had hold up is a NAPA pro. I mean I get that people are prone to abuse floor jacks, but I've always oversized my lifting equipment and had a lot of brands fail.

@valerie_screws_around 2 жыл бұрын

Or maybe put the jack under the hydraulic press and see when they explode 😈

@crforfreedom7407 2 жыл бұрын

did it surprise anyone else to see that a strong CCP/Chinese company like Milwaukee would have their best 90 degree angle tool built in Taiwan? Given all the political falderal between China and Taiwan, it just struck me as funny and ironic...

@D3M3NT3Dstrang3r 2 жыл бұрын

The Milwaukee ones which he tested are better than any commercial / professional versions which I have used. I use the fully plastic version daily in a professional setting and it takes some abuse and has been doing so for several years now.

@gunners4129 2 жыл бұрын

I've put a few of these through their paces with Ford exhaust manifold bolts and other jobs so I had to immediately click 👍

@ProjectFarm 2 жыл бұрын

Great point! Only a couple of them can survive a hard hitting impact tool!

@gunners4129 2 жыл бұрын

90% of my use with them is hex drill bits with this tool run by a 3/8 snap on drill. I have found the cheap slim dewalt to hold the tightest circles with bits and handled far more abuse than my Milwaukee one. As always, awesome videos!

@RB-hj7qc 2 жыл бұрын

I own the DeWalt 60 and now I'm glad that's the one I chose. Your tests are amazing. Thanks!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@chalion8399 Жыл бұрын

I never knew these things existed, but now I can see how they would ease my work load building testing frames. Thank you.

@ProjectFarm Жыл бұрын

You are welcome!

@Gosh_Josh 2 жыл бұрын

Your testing methods are always superb, I look forward to seeing your videos every sunday, and I always check your channel to see what you found to be the best before I make a purchase

@ProjectFarm 2 жыл бұрын

Thank you very much!

@hakont.4960 2 жыл бұрын

I recently bought the DeWalt DWARA 60 and this video has reassured me that I've bought a good angle adaptor. Seeing how much abuse it survived in the video it should certainly handle my use.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@freespeechfinland Жыл бұрын

Bought mine in 2019. Use it occasionally. Works great. Is a must-have in a carpenter's tool box. I have noticed it heating up some but not to a level of concern. Only complaint in practical use is its thin and slippery, tubular form which can make it difficult to hold, causing it to turn and slip off the screw head in tight spaces. The Makita angle adapter seems to have a slightly better form in this regard but i haven't tested it.