Best Rust Converter? POR-15, Eastwood, Rust-oleum Rust Reformer, Gempler's

Рет қаралды 1,803,362

2 жыл бұрын

BRANDS TESTED: POR-15 vs Rust-oleum Rust Reformer, Eastwood, Rustoleum 2x, Permatex, VHT, Plastikote, Gemper’s, and Rust Kutter. Rust converters tested for UV resistance, scratch and chip resistance, adhesive strength, and rust resistance. I purchased all of the products tested to ensure fair and unbiased test results. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
POR-15: amzn.to/3y7UVKf
Eastwood: amzn.to/3aaAXEY
Rustoleum Rust Reformer: amzn.to/3mje6hT
Rustoleum 2X: amzn.to/3iCPf60
Permatex: amzn.to/2We3jKK
VHT: amzn.to/3z2Higx
Plastikote: amzn.to/3sK96nG
Gemplers: amzn.to/3kgJfzB
Rust Kutter: amzn.to/3szPeU2
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 7 100

@Memorymode 2 жыл бұрын

Companies should hope to display a "Project Farm Approved" badge on their products

@ProjectFarm 2 жыл бұрын

Thank you very much!

@shane250 2 жыл бұрын

They actually do that. I've seen that at least 6-7 times.

@devontrombley8425 2 жыл бұрын

@@shane250 Which products?

@shane250 2 жыл бұрын

@@devontrombley8425 Can't remember, but bought something off Amazon and it had "project farm stamp of approval" or something, with a link to the video.

@dyer2cycle 2 жыл бұрын

..Yes..like the ones with "Good Housekeeping Seal of Approval".. :)

@dustin4575 2 жыл бұрын

Since you use brake parts cleaner before just about every test like this in your prep phase, I feel brake cleaner test is a must do video

@ProjectFarm 2 жыл бұрын

Thanks for the video idea.

@denisrhodes54 2 жыл бұрын

the good stuff is non-flammable Tetrachloroethylene. the brand doesn’t matter. either CRC or FVP is the same basic recipe

@dathanchevli7514 2 жыл бұрын

I second

@TheWasher18 2 жыл бұрын

"In todays video, were going to test these brake cleaners on these brakes... so I used brake cleaner to clean these brakes before applying oils to see which brake cleaner puts the brakes on these oily brakes"

@Blue84Stang 2 жыл бұрын

@@denisrhodes54 really? I've heard that the nonflammable is only important if you are going to be welding.... Is that not the case?

@BillB 8 ай бұрын

It blows me away how often I find your videos when researching projects I'm working on. You freaking rock dude!

@ProjectFarm 8 ай бұрын

Thanks!

@SoilentGr33n 9 ай бұрын

The legend of coating your muscle car frame with POR15 lives on.

@jsteel3211 2 жыл бұрын

Unlike many other "experiments" on youtube, this guy really does his best to define the parameters to the viewer and control the testing conditions for the most reliable results. Major respect for that on all his videos.

@daleval2182 2 жыл бұрын

Yes he rocks 😎👍

@michaelyoung3337 2 жыл бұрын

Totally agree, pleasantly surprised.

@Marvin_The_Martian 2 жыл бұрын

It’s nice to see my faith in POR 15 is not misplaced and to have it confirmed by PF is a bonus. Well done. Just need to know the performance of fluid film / waxoyl type products now.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the suggestion.

@unclejim1528 2 жыл бұрын

@@ProjectFarm I'm about to get started on a "stop the rust" project on my trailer. I know POR15 from my off-roading days but its been a long time, so I needed this. Thank you for this and many other reviews.

@massivefins2597 2 жыл бұрын

Sad you didnt include the best one out there... Rust Bullet! arg

@jonathanryan2915 2 жыл бұрын

He did that already

@huktekhardware734 2 жыл бұрын

Last fall I "restored" my 2008 F-250 instead of buying a new truck. Essentially I removed the bed, cut out and replaced bed rails, cut out rot on the wheel wheels and replaced that, cut out and replaced cab corners and parts of the inner rockers and then repainted the truck. After doing this I sprayed the underside of the cab with Chassis Saver which is a product very similar to POR15 and then sprayed fluid film. I sprayed the entire underside of the cab in fluid film over the Chassis Saver paint and the underside still looks great after a salt filled Northern winter. I used fluid film because it is only like $30 a gallon. I used the gun too so I could spray all inside the rockers and through the bed rails. Obviously as you know nothing will totally stop rust. I am basically trying to get my truck to last another 5-7 years before buying a new one. Frequent coats of fluid film over the chassis saver is what I am trying and so far it seems good. I will be putting another coat of fluid film on in fall before the winter again. Once the coat is on it looks like cosmoline is coating the entire underside. It never really dries and is more like a light grease than anything.

@careylarsen2227 Жыл бұрын

POR-15 might appear to be the most expensive but it’s amazing how much square footage it can cover! When that’s taken into consideration, it probably ranks one of the cheapest out there. Coupled with being the best for stopping rust, it’s an overall amazing product!

@ProjectFarm Жыл бұрын

Thanks for the feedback.

@cecilordono6326 Жыл бұрын

Been using this product to all my rust repairs , it works

@Okurka. Жыл бұрын

But it's professional use only.

@paulhoskins7852 Жыл бұрын

Thousands of people do it themselves with POR-15.

@mikeschlup5279 Жыл бұрын

Did you use the metal prep before the POR ?

@elektro3000 Жыл бұрын

Not surprised the POR-15 ran away with this one, it's legendary among us old-car enthusiasts. Rust never sleeps! Love your testing methodology, too. As a metallurgical engineer, I've done some work with the SAE J2334 cyclic corrosion test. You might take a look at it and incorporate some element of wet/dry cycles if you ever do longer term corrosion tests in the future.

@ProjectFarm Жыл бұрын

Thanks for the feedback.

@user-xj7pt9qx6y 10 ай бұрын

@@ProjectFarm is this your normal voice? are you like "honey, im going to the bathroom. im comparing the efffectiveness of these 4 toilet papers.. ok lets go"

@cjsnidlio9409 6 ай бұрын

@ProjectFarm so if using on a car say I get the por 15. I would still need to use a primer over top, and then paint of course and finally clear coat to be used on painted surfaces is this correct? I see many people saying need to sand down and use bondo and sometimes metal filler. But on my car the rust isn't that severe. The paint is only beginning to bubble and very slightly crack in small spots. So I feel sanding would be a bad option

@jwgmail 4 ай бұрын

Do you know anything / have experience with Brunox?

@elektro3000 4 ай бұрын

@@jwgmail Never even heard of it before. Website looks promising, but I have no info to share.

@tbm275 2 жыл бұрын

This is why I love this channel, this project took 60 days to complete, any other channel would have 5 videos from this with updates weekly, but you just put the setup and results all in the same video. I can attest I used the Rust-Oleum rust reformer in the trunk of my car to cover up some surface rust but don't have to worry about impacts in that area so it works great for me.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for sharing.

@dankjankings7339 2 жыл бұрын

I can’t think of another source of information to save time and money that actually applies to products I would actually use. Thank you sir. Your impartiality and simple yet brilliant approach is top tier.

@ProjectFarm 2 жыл бұрын

You are welcome!

@sammycardoso2244 2 жыл бұрын

@@ProjectFarm whats the best rubber cement, say like industrial and generic products. Test strength,durability,heat withstanding Temps,elasticity,insulation against sound or temperature,ease of use. Just throwing ideas.

@matthewchandler7845 2 жыл бұрын

@@ProjectFarm I would KILL to know what car waxes hold up the best to UV/scratches/ dust and dirt as well as tree sap/bird bombs. I think we could all enjoy that one. THANKS for all the top tier content and the work involved!

@Ebooger 2 жыл бұрын

Unlike Consumer Reports, which injects a lot of politics into their so-called tests, this guy gets down in the trenches, and checks out stuff us guys really use. Excellent! I also really appreciate the country of origin information, which Consumer Reports promised they would start supplying 15 years ago, but never did.

@firewoodtime2 2 жыл бұрын

@@Ebooger they aren't what they used to be..

@amishterrorist17 Жыл бұрын

Glad to see rust reformer got a thumbs up b/c I've been using it for years on projects such as truck frames and propane pipes outside commercial livestock barns

@ThriftyToolShed 2 жыл бұрын

Fantastic comparison. I am amazed at the work and time you put in to this. Excellent video as always. I don't know how you get so much information into a small segment. I struggle to get alot of repair videos down less than 20mins.... Thanks for this testing!

@The_RC_Guru 2 жыл бұрын

52 minutes after uploading and over 14,000 views. This man is invaluable to me and millions of others. Not only do I use his videos to learn about products I hadn’t even heard of. Saved myself personally probably over a couple thousand dollars over the years by buying the most effective tools and products based on his testing. Thank you so much. Meanwhile you’re definitely living my dream.

@ProjectFarm 2 жыл бұрын

You are welcome!

@BeetaroniPizza 2 жыл бұрын

First vid I watched was the duct tape one. Day I needed duct tape you know I went for TRex.

@Dea7hWarran7 2 жыл бұрын

Literally bought the Milwaukee 12v 3/8” impact after his test on cordless impacts. Have bought a few other things, “just to have”, including a stud finder, because, well, he said it worked the best for what I’d need. Lol

@blueboat5917 2 жыл бұрын

I am one who asked for this test and I really appreciate the amount of work you put into all of your videos. I'll be using the POR for my project. Thank you!

@ProjectFarm 2 жыл бұрын

Thanks for asking for the video test!

@BRONZE_ROCK 2 жыл бұрын

I asked as well, Great minds think alike right

@davidrichmond5972 2 жыл бұрын

I used POR 15 to seal a gas tank on a 1957 JD tractor

@dmcarpenter2470 2 жыл бұрын

I asked as well. I am a long-time POR user, and glad to see these results. Thanks!

@rustytracey6187 2 жыл бұрын

You guys won't be disappointed. Be forwarned, it will stick like hell to concrete, so make sure you don't get it on the garage floor. I certainly couldn't get it off (I didn't notice till it dried) It's also incredibly scratch and ding resistant, which made me glad I picked it to use on my suspension and subframe.

@zero260designlab3 Ай бұрын

Your attention to detail and editing is so commendable

@daveallen63 Жыл бұрын

I've been watching for several years here and there but always forget to subscribe, not anymore I am now official. It's been a pleasure tuning in and I have appreciated every video, I'm a tightwad so I always put off purchasing things I need in the shop because I don't want to waste money. You have helped by giving a good direction to go in. Thanks.

@ProjectFarm Жыл бұрын

Thanks for watching and subscribing!

@Guysm1l3y 2 жыл бұрын

Here's an idea: test those "2X" primer+paint versions versus using a separate primer and paint.

@ProjectFarm 2 жыл бұрын

Thanks for the video idea.

@rgjr702 2 жыл бұрын

Yess

@kerktam 2 жыл бұрын

yes please

@bhough410 2 жыл бұрын

@@ProjectFarm Would be interesting to see both coverage and durability.

@catsspat 2 жыл бұрын

I've never found Shampoo+Conditioner-in-One to perform as good as separate Shampoo and Conditioner. ;)

@Tarkov. 2 жыл бұрын

It's kind of strange to see the "control" test end up in the middle of the pack. The Rust Reformer looks like an incredible deal for the price. Thanks for the video, not only is it entertaining but very useful information.

@reina4969 2 жыл бұрын

Yeah, I am somewhat concerned by that. It is almost like we are not understanding the point of these rust converters and are testing them against criteria that is unfair. I am not saying I THINK that is the case, just wondering if people with more wisdom than me could posit a test that would have left the paint at the bottom.

@reina4969 2 жыл бұрын

These tests were very simular to the bed lining tests in a way. They call got blasted by the rust accelerent solution.

@reina4969 2 жыл бұрын

Or... the fact is whatever coating the rust is "converted into" is just poor and there is no fixing a poor material coating. Which makes me think that POR-15 just adds something like plastic truck bed liner as a protectent.

@carlfesser6673 2 жыл бұрын

Paint is a great sealer. This test was more about preventing future rust, less about converting existing, so you're right that it didn't necessarily test the intent of the products. A test that showed the performance of a paint that says all rust must be removed prior to application would have better shown whether the products actually neutralized the existing rust.

@ProjectFarm 2 жыл бұрын

You are welcome!

@ianbertenshaw4350 2 жыл бұрын

The lengths you go to when testing and the innovation’s amaze me ! The scratchometer is brilliant !

@ProjectFarm 2 жыл бұрын

Thanks!

@mikesmith8952 11 ай бұрын

I Used Por 15 on a light duty dump truck dump bed with great, awesome results. All did was use a powered wire wheel to remove light rust, cleaned the bed with compressed air and then wiped down with a degreaser, cleaner and allowed to dry well. I spread the Por 15 very thin with a brush and roller and shockingly it held up very well to loads of Class five rock, gravel bing dumped on it. I will be doing the same project afain with another dump truck next week using Por 15 again. If POR 15 gets on your skin its almost impossible to remove, trust me..

@ProjectFarm 11 ай бұрын

Thanks for sharing.

@ajjohn8729 10 ай бұрын

How much did you guys use? A whole gallon?

@13slot28 2 жыл бұрын

Project Farm : We're gonna test that! Company's : visible sweating.

@TheWasher18 2 жыл бұрын

Amazing I LIVE FOR THESE... well, my garage shelves live for these.

@ProjectFarm 2 жыл бұрын

lol. Thanks!

@danweiss1371 Жыл бұрын

I can always count on your video library. Thanks. I recently changed to a new cell phone and lost your KZfaq channel. So happy to find it today

@ProjectFarm Жыл бұрын

Thanks! Happy you found it today!

@johnfarney5328 Жыл бұрын

Man, you work your butt off for these tests. I appreciate it.

@kokocostanza2036 2 жыл бұрын

POR-15 claiming that's it's permanent is no lie. I used their 3 part system years back and that stuff is mean. Great testing as always!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@polarstar 2 жыл бұрын

Yep, I used their system to reline the interior of a 20 gallon gas tank. Brilliant stuff.

@AIM54A 2 жыл бұрын

I can also give a long term review of POR-15. I used it about 20+ years ago on an old car frame to stop it from rusting.. It still looks great with no rust.

@TheRocky3211 2 жыл бұрын

Absolutely love the effort you put in to all your testing , really shows in the videos .

@ProjectFarm 2 жыл бұрын

Thank you very much!

@techanic 2 жыл бұрын

I appreciate how you fill all of your time with useful information. Many utubes of this sort would have been 3 times as long and not as informative.

@ProjectFarm 2 жыл бұрын

Thanks!

@victorlin8098 Жыл бұрын

Thanks a lot for your great efforts to show us the results from different testing! Excellent video!!!!!

@AntonioClaudioMichael 2 жыл бұрын

I would love to see these tests as well as like heat tests on paints that claim to work with 500 degrees for engines and even 2000 plus degree paint for Like exhausts that would be super cool informative video don't think I have seen you do any kind of video like this yet 🤔🤘👍👌@Project Farm

@ProjectFarm 2 жыл бұрын

Great suggestion! Thank you.

@saturnmedia1 2 жыл бұрын

I second this suggestion!!

@AntonioClaudioMichael 2 жыл бұрын

@@ProjectFarm any time appreciate you always reading our comments and taking suggestions what makes you amazing

@daewooparts 2 жыл бұрын

@@ProjectFarm put the heat on it 🔥 definitely do this one

@Rltvader1 2 жыл бұрын

I third this suggestion. I have always wondered how "heat proof" certain coatings are. If you do decide to do this I would recommend also trying some common gun coatings such as parkerization, duracote, and cerakote.

@tonyurbano8368 2 жыл бұрын

Rust oleum is my go to paint when restoring rusty metal projects! I’d love to see you test degreasers, like purple power, zep, simple green, etc…

@ProjectFarm 2 жыл бұрын

Thanks for sharing. Thanks for the video idea.

@ImTheJoker4u 2 жыл бұрын

MUST add *Dawn* dish soap to the mix too (that cheap stuff is garbage). Ive used it at the shop over everything else for decades. The Uni-First guy used to wonder why we never used the pumice soap until I washed my hands with Dawn in front of him😂🤣

@alanj7306 2 жыл бұрын

Dawn does an awesome job. It’s what they use to degrease bridges, as it’s environmentally friendly. It’s also used to clean animals after an oil spill. It’s definitely awesome stuff and very cheap.

@billyshoplak4490 2 жыл бұрын

Would like to see Super Clean in those test

@drizler 2 жыл бұрын

I did the bottom of my 90 Cavalier Z24 with that back around 2005. Red rusty metal primer with black enamel after a fairly complete sandblast ( on my back masked up the ugly way.). Undercoat sprayed after . By the next winter it was ugly with rust worse than before. I’d used rust oleum for many years prior to their taking the lead out of it with great results. Nowadays I annually spray the base and tape door drains let soak with 2” deep mix of used ATF / bar n chain oil and cheap petroleum jelly. It’s messy but seems to stop rust in its tracks as well as can be expected even in areas that can’t be gotten at . Beyond that all you can do is move south because the rust always wins in the end

@justinjennings6836 Жыл бұрын

You are by far one of the most important KZfaq channels Im subbed to the information gathered and shared is incredibly helpful.

@ProjectFarm Жыл бұрын

I appreciate that! Thanks for watching and subscribing!

@bruceheath7 Жыл бұрын

Finally someone who get to the point and stay on track by far the best video I have watched on You Tube. Thank you for a great job.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@electronicsNmore 2 жыл бұрын

Thank you for another great testing video that will definitely help me in the future!

@ProjectFarm 2 жыл бұрын

Thank you very much!!

@Pooopers 2 жыл бұрын

@@ProjectFarm Came here to leave this exact comment always. Refreshing to always have a channel like yours with no sponsorships muddying the waters of REAL reviews and tests!

@Rithius3485 2 жыл бұрын

@@ProjectFarm Yay, I think I suggested this maybe! I been holding off on my trucks body work for this, haha

@AndrewDasilvaPLT 2 жыл бұрын

Agreed, thank you.

@beckyfrogers 2 жыл бұрын

@@IBNetMan I too have used Corroseal, (26.99 qt) on a antique cast iron bird bath, it did the trick.

@kevina.5430 2 жыл бұрын

I REALLY could have used this video yesterday when I just redid my mower deck with a rust converter. Love every single one of these videos, they have informed so many of my purchasing decisions.

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for sharing.

@billiebobbienorton2556 Жыл бұрын

Thanks for your suggestion! Thanks for the feedback ! You are welcome !

@seanwright6049 2 жыл бұрын

Man I watched this after I painted the underside of my van with rustoleums rust reformer and a top layer of Rustoleums undercarriage paint and now I am very glad that I went with that option. Great work showing the products.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@TheKeenMechanic 2 жыл бұрын

Thank you so much buddy. Your work amazes me every time. I have now ordered POR15 for my car restorations. Thank you for saving me the time and hassle to find out myself🤝

@ProjectFarm 2 жыл бұрын

You are welcome! Glad I could help!

@Isjix4410 2 жыл бұрын

POR15 works great on frames. 2 years later still looks like new on my grand dad's S10.

@korg47237 2 жыл бұрын

I'm glad to see the POR-15 work so well. I used Rustoleum Rust Reformer on my Jeep's underbody and after one winter it got pretty bad with rust. This April I painted on the POR-15 and after a bunch of beach sand, rain, and mud it's looks like the day I painted it. I am curious how the road salt this winter will treat it!

@zachary3777 2 жыл бұрын

If you got the one with aluminum powder in it you should be pretty good. The black ones are no where near as good.

@ProjectFarm 2 жыл бұрын

Thanks for sharing!

@FunBitesTV 2 жыл бұрын

@@zachary3777 por15 with aluminium powder in?

@JasonHam41 2 жыл бұрын

Por-15 long term has proved to be total junk, really disappointed. Trying aqua steel rust converter and lanoguard this time.

@Gengear 2 жыл бұрын

I live in the north east and used POR-15. It looked good for a few years but after that the rust came through. It must have been holding the rust underneath until it got so bad it flaked off. I regretted putting it on my frame because it just excelled the rot on the frame. I use fluid film now on all my vehicles, seems to work the best for preventing rust from starting.

@chadmartin479 11 ай бұрын

Testing of the products (especially shop items) is great. Oils, paints, welders, tools ... Probably the high quality brands like Rust Oleum do test their products. In the past I worked for a large chemical company, and they did extensive testing of paints and coatings in lab. They even had an outdoor testing area. They would put samples out there for years at a time like in a matrix of panels. You are reproducing that kind of testing on a practical level, its very useful for consumers.

@ProjectFarm 11 ай бұрын

Thanks! Thanks for supporting the channel! I really appreciate it!

@audrybella6405 2 жыл бұрын

What an awesome evaluation and great video. Organized and professional evaluation of these products which is exactly what I needed for an upcoming dump truck project. I am glad I found your channel and you’ve got a new subscriber from southeast Georgia!!

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for watching and subscribing!

@luke46219 2 жыл бұрын

7:55 That's just about the most scientific way of saying, "I'm going to shoot it with a BB gun."

@ProjectFarm 2 жыл бұрын

Thanks!

@bjleau76 2 жыл бұрын

Careful, you will shoot your eye out, Ralphie

@WayneWerner 2 жыл бұрын

The first video I watched where he did this test I first thought, huh, .177 sounds famili...oohhhh

@joeguerrier7975 2 жыл бұрын

Re title the video...how to convert rusty scrap metal to BB gun targets...lol

@Brandonpowerstroke 2 жыл бұрын

You must be new here.

@Colorado_Native 2 жыл бұрын

Thanks Todd for doing this. I am working on my Jeep to slow/stop the rust inside and outside the frame, underneath the body and even inside the doors. This helps. I owe you a Klondike ice cream bar.

@ProjectFarm 2 жыл бұрын

lol. Thanks in advance for the ice cream bar!

@1leafsfan6 2 жыл бұрын

All the por 15 products are amazing. I would recommend you look into por 15 frame paint for your project as well. It's a high solids paint that is very durable. I used it on the floor of a car that doesn't have carpet over it and it's been 2 years and there isn't a scratch or sign of rust.

@Colorado_Native 2 жыл бұрын

@@1leafsfan6 Thank you for the recommendation. It's already on order from Amazon. I think they must love Todd's channel.

@philthycoder 2 жыл бұрын

There's no stopping, only slowing. One thing that has to be made more apparent with all rust control products is that coating it with something will NEVER be a 100% solution. The only real fix is to media blast it down to bare metal and coat it fresh.

@justinholmes5328 Жыл бұрын

Thanks for this excellent review. I was considering what product I should use to treat my rusty Chevy frame. I was leaning towards POR-15 anyways due to past experience/conversations with friends in the auto body industry. I think this review has sealed the deal

@allwinds3786 Жыл бұрын

I'm going to be doing some minor rust repair on my Sprinter this spring, I bought POR-15 last year and found it very messy to work with and am glad I made the right choice. Thank you for all your work. Keep it up!

@ProjectFarm Жыл бұрын

Thanks and will do!

@HeFella 2 жыл бұрын

Awesome Timing on the video dude! I was just about to start work on a rusty truck. We appreciate all that you do

@ProjectFarm 2 жыл бұрын

Glad to help

@michaellinner7772 2 жыл бұрын

The old "you get what you pay for" seems to have held true on this one. Thanks Todd. Great testing as usual.

@ProjectFarm 2 жыл бұрын

Thanks!

@GRBtutorials 2 жыл бұрын

Not always, though, the cheapest ones were better than mid-range, it was only the most expensive that performed better.

@davidpower1843 2 жыл бұрын

It’s always a good feeling when you watch a Project Farm video *after* you make a purchase and you made the right call. Spraying Eastwood this week

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@DRV-mt5dd 2 жыл бұрын

Thanks again for your work! Just today I was about to do some metal prep for paint and checked your website- and sure enough you had already reviewed the Rustoleum rust reformer I had on hand, so I felt better about using it knowing how it compares. Great.

@ProjectFarm 2 жыл бұрын

You are welcome!

@raabsand 2 жыл бұрын

It's nice when you've been using a product (por15) and then have project farm say its the best. Really boosts my confidence for using

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@nates5703 2 жыл бұрын

This was one of the most lopsided wins in PF history.

@mdesousa6691 2 жыл бұрын

I'm surprised Loctite Rust Neutralizer wasn't included. Maybe do a round 2 video with it and Ospho iron phosphate rust converter?

@alanj7306 2 жыл бұрын

Always cool when PF tests something I have/use and it does a good job. It’s definitely reassuring.

@Toyeboy89 2 жыл бұрын

Yes same here I was rooting for the POR15 since I used it on my dad's car

@DanteLanznaster 2 жыл бұрын

Another great video! Confirmed my experience with POR-15 being one of the best around. Would love to see an eval with Evaporust followed by scrape/paint.

@WayneWerner 2 жыл бұрын

Same!

@SkaterStimm 2 жыл бұрын

Evaporust is not the same as a rust encapsulator. It is meant to return rusty metal to a bare metal if submerged.

@awillard69 2 жыл бұрын

I use POR-15 and find it the best solution. I tried various other options and they all failed in just a few months. Like any such product, prep and application are key. Do it right and you get the best results.

@charliesullivan4304 2 жыл бұрын

@@SkaterStimmYes, it's a very different product. Using that plus a regular primer and paint is a very different strategy. All the more reason that a comparison would be interesting.

@troysgarage 2 жыл бұрын

This confirms my decision to use Rust Reformer on my truck restoration projects because of budget. Dries quickly and is paintable. All the parts I’ve used this on over the years are still looking awesome and I still have money for the rest of the parts needed. Awesome video as always! 🙌🏼

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@codavied 2 жыл бұрын

I expected por15 to win going into the video, as I've used it and it's good stuff. I was thoroughly impressed by how well the Rustoleum performed with how cheap it is compared to some of the others. Thanks for the great content!

@ProjectFarm 2 жыл бұрын

You are welcome!

@keithhansen3963 2 жыл бұрын

This is why they call POR-15, "powder coat in a can." I have used it for years and nothing compares. Great review as always

@ProjectFarm 2 жыл бұрын

Thank you for the feedback!

@Featherburner Жыл бұрын

KBS Coatings is just as good as POR-15 and a bit less costly.

@nicenonya3 Жыл бұрын

POR stands for paint over rust

@scottdezieck7056 2 жыл бұрын

The POR 15 is amazing. I used it on my 66 Chevelle SS for when I did a frame off restoration for the frame and under body and over 20 years later it still looks perfect ...no rust no chips. Looks as good as when I first did it. This stuff is the best !!!! And when you brush it on it smooths out like if you sprayed it on. A can of it covers a large area so it actually works out cheaper than anything else.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@stuartwall8212 2 жыл бұрын

@@ProjectFarm I used POR 15 in a rusty trunk floor, that had small and medium holes rusted through, in combination with fiberglass matt and cloth. I installed 2layers of matt and one cloth layer, rolling the POR 15 into each layer as you would with resin. no dry time inbetween. 6 years later the trunk floor is still solid with no signs of rust.

@Zumone1one 2 жыл бұрын

Can por 15 be painted over?

@keithhall4009 Жыл бұрын

@@Zumone1one yes, it can. They also make a product called Top Coat to go over POR-15.

@jackd1582 Жыл бұрын

I wonder how similar it is to something we have here called PA 10

@troyd.521 Жыл бұрын

Any time I’m looking into new products I always come here and hope to find a test!!! Most honest reviews out there!!!

@ProjectFarm Жыл бұрын

Thanks!

@timarcher8707 3 ай бұрын

Before I buy anything, I check if you've reviewed. Outstanding Job!

@EpicBenjo 2 жыл бұрын

I’ve used POR-15 on a car about 12 years ago, and it has held up really well. It seals any potential for more rust from the air and elements.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@tipr8739 2 жыл бұрын

what kind of car and where?

@gman8760 2 жыл бұрын

all of my por 15 has peeled

@BUCKMAW 2 жыл бұрын

@@gman8760 POR-15 must be painted with a topcoat or UV light will destroy it.

@gman8760 2 жыл бұрын

@@BUCKMAW yeah i realized that now. it was on my frame... however i painted my well thats about a foot above the ground with no top coat and it seems to be holding up well

@JoseCruz-op1qv 2 жыл бұрын

I've enjoyed your work for some time now but this is the video that finally convinced me to register an account with Patreon in order to give back. I am always impressed by your test rigs and the time and effort put into the tests but the fact that you ran a 60 day painted/unpainted/un-accelerated test for each product totally sold me. I am about to have a rusty truck sandblasted and was considering POR15 and your work eliminated any hesitancy I had to spend the money. Thanks again!

@ProjectFarm 2 жыл бұрын

Thanks so much for watching and for becoming a Patreon! Greatly appreciate it!

@tallman2994 2 жыл бұрын

cut all rust out, weld new medal in use epoxy primer top coat, wax,,have fun tjf!!

@SomethingEternal 2 жыл бұрын

@@tallman2994 Instructions unclear. Head stuck to epoxy undercoat.

@stylicho 2 жыл бұрын

Watch the beginning of the video. He states that these products don't work on bare metal. Wouldn't sand blasting eliminate all the rust?

@codavied 2 жыл бұрын

If it's getting sandblasted I'd also recommend using an epoxy primer on the clean metal, rather than por15 like tallman said

@aaroncowan9832 2 ай бұрын

This guy is so smart and organized. Outstanding content.

@georgebell117 2 жыл бұрын

I was looking for information on restoring a metal shed and found your video. This is outstanding in thorough information, thanks!

@ProjectFarm 2 жыл бұрын

Awesome, thank you!

@jckrarup 2 жыл бұрын

Love the work you are doing! Objective tests of such a wide range of products is rare. Thank you !

@ProjectFarm 2 жыл бұрын

Thanks so much!

@romeo1550 2 жыл бұрын

I would like to see some tests for different types of fishing lines: monofilament, fluorocarbon and braided. Knot strength, knick resistance, tensile strength, twist resistance and age control. Different knots and line weights. So many options, it's hard to choose.

@ProjectFarm 2 жыл бұрын

Thanks for the suggestions.

@jeffpaetkau6622 2 жыл бұрын

@@ProjectFarm Another vote for fishing line!

@leftyeh6495 2 жыл бұрын

Berkley has videos on knot strength. Basically, if you're using a braid you use a palomar or modified palomar knot, and every one of them will exceed the test rating. If you're using a mono or flourocarbon, use a trilene knot and you'll exceed the test rating. I have used many, many lines. I've had some I loved for their strength and abrasion resistance, but they wind knotted and were a pain when trying to cast on windy days. Mono that worked amazing for a few months, then took a set and turned into a big ball of shit trying to go through the guides. I have it narrowed down to just a few that stay in the boat now. Sensation in 6,8,10 lb for various size spinning reels and leader. Basic standard fireline in 6 and 10 lb for various size reels. 30lb braid for the baitcasters that I'll be using to flip and drop in trees and heavy weeds. And lastly 10-12lb flourocarbon for leader material if you need that weightless plastic worm to jig slower, or you can't get away from those slimey pike.

@MegaTechno2000 2 жыл бұрын

Maybe he don't fish.

@HypnoticSuggestion 2 жыл бұрын

Awesome timing seeing that you've covered this. I have no experience with these kinds of products and I have a little rust under my car. Rust terrifies me living in the northeast, I had to scrap a nice Subaru this past February, was painful to do and really caught me off guard, learned my lesson.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@rightsidewarrior2010 Жыл бұрын

Been using POR 15 for some time now and I am also impressed! Thanks for sharing!

@ProjectFarm Жыл бұрын

Thanks and you are welcome! Glad to hear!

@IndependantResearch 2 жыл бұрын

Perfect timing...I have two landing gear on my trailer rusting I was prepping to paint...thank you as always for helping us find the best tested solutions.

@ProjectFarm 2 жыл бұрын

Glad to hear!

@iamherenotheretobe 2 жыл бұрын

I've used the eastwood internal frame coating/fluid film on my one car that has never seen a winter since I bought it used. I have no complaints. I painted the frame the best I could with por15. No more rust has popped out. It wasn't bubbly rust just surface. Best looking midwest car its age around. Trying woolwax now on my winter/family hauling truck. Por15 is great just not in the sun.

@user-cb1ln8vc8d 2 жыл бұрын

Definitely hates the sun. I used a bit on my bumper and it turned transparent and has rust coming through.

@craigwiess1656 2 жыл бұрын

Need to use the uv stable top coat if exposed to the sun

@iamherenotheretobe 2 жыл бұрын

@@craigwiess1656 Very true, I have heard of some people rattle can spraying por15 while it was still tacky and had good results just using normal rustoleum to keep it from becoming chalky.

@frankcastle5294 2 жыл бұрын

This might be your best vid yet and I can't thank you enough, as I always do. I don't think people at home on their couches who never had a shop or tinkered, have any idea how much work and time is required for one of these tests.

@ProjectFarm 2 жыл бұрын

Wow, thank you!

@riograul2043 Жыл бұрын

Thank you for all of your hundreds and hundreds of tests that you've shared with the world!

@ProjectFarm Жыл бұрын

You are welcome!

@hunterm.172 2 жыл бұрын

Yet again another great video!-thank you so much for your dedication and hard work in doing these videos!!

@seanh6578 2 жыл бұрын

Seem like this is one of those, you get what you pay for episodes. I still absolutely appreciate the time and effort in the comparison though! I have used and still use the Rust-Oleum 2x paint on things it seems like a good general product. And I have used POR-15 on rusty things with good results. Mainly this confirmed what I expected going in. 👍 Thanks! Sean

@ProjectFarm 2 жыл бұрын

Thanks so much!

@alisseinbuffalony3371 Жыл бұрын

THANK YOU for your meticulous work, quick and clear results comparison and fair-minded balance between price and performance. Yours is a model of how to test & explain!!

@ProjectFarm Жыл бұрын

You are welcome!

@TheOtherMisterRogers Жыл бұрын

The review system you've come up with is perfect. Thank you for taking the time to create these videos, we all appreciate..... wait, not all of us, in particular the companies trying to sell inferior products LOL, your time and effort.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@n2omike 2 жыл бұрын

For the impact tests, to be more valid... you need to do at least 3 shots at each sample, and average the results. LOVE your tests! I use POR 15 and you do NOT want to get it on your hands. It is a BEAR to remove! lol

@rd4660 2 жыл бұрын

It will come off after about a week.

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for the constructive feedback.

@dylanzrim3635 2 жыл бұрын

I feel like the right way of shortcutting the impact tests. Shoot until damage occurs. I feel like that way you get a real world result without the scientific spin. (Yes there’s plenty of spin in science...)

@edwardallan197 2 жыл бұрын

I agree with you.

@alanhonlunli 2 жыл бұрын

God I love your videos. Who else produces such good comparison of everyday commercial home improvement products?! You're the consumer reports of home improvement, man!

@ProjectFarm 2 жыл бұрын

Thanks so much!

@calenwells1462 Жыл бұрын

This is exactly what I needed! Well done. No fluff. Bravo.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@artistlovepeace 10 ай бұрын

Your channel is astonishing, fantastic and very cool. Thank you for producing and sharing all your hard work and science.

@ProjectFarm 10 ай бұрын

Thank you very much!

@plainbrownwrapper9688 2 жыл бұрын

Absolutely happy to see the por15 came out on top. I did my truck frame a few years ago and it's been holding up awesome to the road salt. Awesome video

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for the feedback.

@researchandbuild1751 2 жыл бұрын

Por 15 is overrated imo i doesnt work that well

@zell863 2 жыл бұрын

@@researchandbuild1751 Agree. Ower rust I go with cosmoline.

@screamosux 2 жыл бұрын

Awesome! I was hoping this project was sitting somewhere in the cache. Can't wait to see the end results!

@ProjectFarm 2 жыл бұрын

Thank you very much!

@del-boysnostalgiatvads7416 2 жыл бұрын

@Mallard your comment is inappropriate,

@SonOfPatriots 2 жыл бұрын

@@del-boysnostalgiatvads7416 ???

@del-boysnostalgiatvads7416 2 жыл бұрын

@@SonOfPatriots 😘

@reina4969 2 жыл бұрын

@@del-boysnostalgiatvads7416 lol troll. ;)

@jpshorty5095 2 жыл бұрын

I love all your videos man. Keep up the good work!Just how professional you are and it seems like there is never a doubt after watching one of your videos.

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@Hunter_Dawso 2 жыл бұрын

I’ve been using the Rustoleum rust reformer for a while including the restoration of a B&O railroad signal. Stuff really holds up. This video just reaffirms my thoughts on the product. Keep up the amazing work.

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@BepBepStev 10 күн бұрын

I agree. I was using an old truck bed toolbox as a little project to practice mig welding thinner metal, and when I was done I decided to try rust reformer and was very impressed with the result.

@andrewlawrence1169 2 жыл бұрын

Very convenient video as I'm in the process prepping and coating my entire silverado frame in por15 and odd spots with rustoleum. Time and time again you have guided my product purchases in the right direction. Thank you for all you do.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@brodiepowers8698 2 жыл бұрын

Whatever you do wear as much protective coating as you can. I had to scrub my body with a pumice stone for 2 hours to get the por15 off after doing my Jeep lol. I wasn’t waiting weeks for my skin to do the work for me

@andrewlawrence1169 2 жыл бұрын

@@brodiepowers8698 I had the same issue because I already did the entire rear of the truck. It started to come off after 3-4 days. I still specks on my nails 2 weeks later. Supposedly the best thing to use is like vegetable oil or conola oil? Absorbs in your skin and lifts it off the surface from below

@JohnLight1 2 жыл бұрын

Most people don’t realize the importance of hawthorns: Rust-Oleum's headquarters are at 11 Hawthorn Pkwy.,in Vernon Hills, IL, the Beach Boys grew up in Hawthorne CA, and the Wright Brothers lived on Hawhorn Street in Dayton OH. and later moved to Hawthorn Hill in Oakwood.

@ProjectFarm 2 жыл бұрын

Thanks for sharing!

@turbosloth8575 2 жыл бұрын

It’s a suburb in Melbourne Australia as well

@BROKINVR 2 жыл бұрын

This is the greatest review video I’ve ever seen! Amazing thorough job! Exactly the information we needed. Thank you!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@alanj7306 2 жыл бұрын

I’ve only ever used Rustoleum before, like 20 years ago. It was the high temp version for a grill. Think it was $6 back then. It did a great job overall. Always appreciate these videos and the information they provide.

@ProjectFarm 2 жыл бұрын

Thank you

@todivetoday 2 жыл бұрын

This video just came out in time when I need to clean and repaint/protect from the rust trailer ball bar. Thank you, sir, for yet another very useful video.

@ProjectFarm 2 жыл бұрын

You are welcome! Glad to hear!

@TheOleHermit 2 жыл бұрын

Thanks, Todd! This is exactly what I needed to know before bead blasting, undercoating and painting my conversion van rebuild. Tested a few different brands, but was still undecided, until now. POR-15 it is.(never heard of it, until now) 😎

@ProjectFarm 2 жыл бұрын

You are welcome!

@Botanifiles 2 жыл бұрын

I'm planning on painting the underbody of my truck, what products will you be using on your van?

@thomasleary1807 Жыл бұрын

As others have mentioned, the can of POR 15 will cover a lot of area. A lot of the weight in the spray products is propellant, so I would bet there is much less total coverage for any of the spray products. Perhaps weighing the cans before and after application would provide useful comparative data about the cost per application, or an estimate on total area that can be covered with each product.

@ProjectFarm Жыл бұрын

Thanks for the feedback.

@cdcd1607 10 ай бұрын

Thanks my guy! This was a lot of work for you and totally a needed video for us repair guys

@ProjectFarm 10 ай бұрын

You are welcome!

@terryzak1742 2 жыл бұрын

Absolute praise to you for the high quality content and the meticulous attention to details, design of experiments and process control. The POR looked like it went on quite heavier than the other coatings, and couldn't help but think of how this may have impacted the results. But while control of coating thickness would certainly be a variable, I don't know who that would be factored out especially when comparing spray vs. brush-on products. Keep up the outstanding work!!

@DaffyDuc69 2 жыл бұрын

I've been using Eastwood for years on all of my projects, and it holds up really good for the long term. One nice thing is they have a version with a 3ft whip that you can spray the inside of the frame, and not just the outside.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@DaffyDuc69 2 жыл бұрын

@@ProjectFarm also another thing to take into consideration. You can very easily touch up Eastwood by just spraying more. POR15, doesn't let you do that.

@Counter-Intuitive Жыл бұрын

@@DaffyDuc69 Not only that but you're not able to use POR 15on bare metal whereas you can with Eastwood Rust Encapsulator

@chandiaz7694 Жыл бұрын

Recently I’ve used the Eastwood rust encapsulator and I really like that plastic tube / spray nozzle configuration.

@enriquecastellanos7110 Жыл бұрын

your testing methods are fantastic ! the makers of these products should be paying you for this. I used the rustoleum on my truck frame about 7 months ago and it is doing fine.

@ProjectFarm Жыл бұрын

Thanks! Great to hear the rustoleum worked out for you!

@chrishaan5766 4 ай бұрын

Everytime I get myself into a project or looking to purchase a product I hope you have a video that will help me decide how to proceed You do NOT disappoint !! I will spend the extra money I’m restoring a 66’ El camino and found some heavy surface rust on the passenger floor board The panel is still solid and no holes Thank you and keep up the GREAT work !!

@ProjectFarm 4 ай бұрын

Thanks, will do!

@bassnazi4713 2 жыл бұрын

Might could do a video on dremel type tools and their attachments like the wand type flexible engraving and get a few videos out of the cheaper bits and wheels.

@ProjectFarm 2 жыл бұрын

Thank you for the video idea!

@TAELSDOLL 2 жыл бұрын

@@ProjectFarm i was asking for rotary tools but dremels are the same

@bixby9797 2 жыл бұрын

I use my Dremel for much stuff including sharpening chainsaws and lawnmower blades with the attachment. For cutting holes in walls for electrical boxes the Dremel is fantastic. Do Not Do Home Gunsmithing with one, for the love of God please don't do this

@bassnazi4713 2 жыл бұрын

Yea these tools and attachments have tons of versatility, and why I said it would make for a few videos for sure given the cheaper supply of grinding stones, wheels, bits, and attachments that have hit the market. Thank you all for supporting the idea because yes, we use them plenty for plenty.

@bassnazi4713 2 жыл бұрын

@@TAELSDOLL yea I just wanted to make it a bit more user friendly. There are tons of options out there now, some better than others and some not so much, but thanks for totally supporting the idea and totally wasn't trying to steal it lol.

@robobo2650 2 жыл бұрын

I used Rust-Oleum on a jeep hatch that was rusted out after patching it up and using bondo to smooth it out. Still no rust 1 year later and I'm pretty impressed because it was just a budget fix to try and slow it down atleast. For the price it really is awesome stuff. Love your videos by the way. Thanks for all your hard work!

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@robertdonahue2213 2 жыл бұрын

Thanks for the research on this and all the products you test.Saves me a lot of time and I can use the better products the first time.

@ProjectFarm 2 жыл бұрын

You are welcome!

@mehammered 2 жыл бұрын

This video just helped me figure out my project for next weekend, thanks for all your videos.

@ProjectFarm 2 жыл бұрын

You are welcome!

@daves.9673 2 жыл бұрын

This test was So Awesome..i just signed up for Patreon for $2 Aussie dollars per month, which is huge for me because i'm a free-loading jerk, usually. Massive respect for your amazing techniques and presentation. Great work, as always..... *THANKS!!* PS- you got me for 12mths minimum

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for becoming a Patreon! Glad you enjoy the videos!

@johno7149 11 ай бұрын

Thanks for the great videos! Moved into my house in 2000. House had steel Bilco doors into basement (12 year old house). Bilco's had original primer but had never been painted. They were rusted bad enough to where I looked into replacing them. Decided to paint with POR-15 and topcoat with Rustoleum paint. It's now been 23 years since I POR-15'd them and they are in great condition. I do repaint them every 6 or 7 years. The POR-15 just locked up the rust and they look better now then they did 23 years ago. Good Product! I also used it to treat the bottom of my Toyota Sequoia, Toyota's are rust bombs if you live in the snow belt.

@ProjectFarm 11 ай бұрын

You are welcome! Thanks for sharing.